using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Text; using System.Windows.Forms; using gregn6Lib; using Pub_Class; namespace WorkM { public partial class Sc_ProcessMoveBill : Form { public Sc_ProcessMoveBill() { InitializeComponent(); } //定义 public const Int16 HTagCol = 0; public const Int16 HSnoCol = 1; public const Int16 HRemarkCol = 2; public const Int16 HCloseManCol = 3; public const Int16 HCloseTypeCol = 4; public const Int16 HSourceInterIDCol = 5; public const Int16 HSourceEntryIDCol = 6; public const Int16 HSourceBillNoCol = 7; public const Int16 HSourceBillTypeCol = 8; public const Int16 HRelationQtyCol = 9; public const Int16 HRelationMoneyCol = 10; // public string ModName = "3770"; public string ModCaption = "工序移转单"; public bool BillChange; // public string HInnerBillNo = ""; public DBUtility.ClsPub.Enum_BillStatus BillStatus; public Int64 KeyID; public bool grdStatus; public DAL.ClsSc_ProcessMoveBill BillNew =new DAL.ClsSc_ProcessMoveBill(); public DAL.ClsSc_ProcessMoveBill BillOld = new DAL.ClsSc_ProcessMoveBill(); //ClsGridViewSum oSumGrid = new ClsGridViewSum(); //------------------------------------------------------------------------- #region 固定代码 //清空界面 public void Sub_ClearBill() { DBUtility.Xt_BaseBillFun.Sub_ClearBill(gbUp); // txtHMaker.Text = ClsPub.CurUserName; txtHMakeDate.Text = ""; txtHChecker.Text = ""; txtHCheckDate.Text = ""; txtHCloseMan.Text = ""; txtHCloseDate.Text = ""; txtHDeleteMan.Text = ""; txtHDeleteDate.Text = ""; txtHUpDater.Text = ""; txtHUpDateDate.Text = ""; txtHBacker.Text = ""; txtHBackDate.Text = ""; initGrid(); } //编辑单据 private void Sub_EditBill() { string s = ""; if (BillOld.ShowBill(BillOld.omodel.HInterID, ref s) == false) { MessageBox.Show("此单据有错误！", "提示"); return; } if (BillOld.omodel.HChecker != "") { MessageBox.Show("此单据已经被审核，不允许修改", "提示"); return; } this.BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify; this.Sub_OperStatus(); txtHUpDater.Text = ClsPub.CurUserName; txtHBillNo.Enabled = false; } //删除单据 private void Sub_DeleteBill() { string s = ""; if (BillOld.ShowBill(BillOld.omodel.HInterID, ref s) == false) { MessageBox.Show("此单据有错误！", "提示"); return; } if (BillOld.omodel.HChecker != "") { MessageBox.Show("此单据已经被审核，不允许审核", "提示"); return; } if (MessageBox.Show("确定要删除当前单据？", "提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Question) == DialogResult.OK) { if (BillOld.DeleteBill(BillOld.omodel.HInterID, ref ClsPub.sExeReturnInfo) != true) { BillChange = true; MessageBox.Show("删除失败,原因:" + ClsPub.sExeReturnInfo, "提示"); return; } MessageBox.Show("删除成功", "提示"); BillOld = new DAL.ClsSc_ProcessMoveBill(); this.Sub_Next(); //显示下一张单据 if (BillOld.omodel.HInterID == 0)//若找不到下一张，则显示上一张 { this.Sub_Prev(); } if (BillOld.omodel.HInterID == 0)//若找不到上一张，清空 { this.Sub_ClearBill(); } BillStatus =DBUtility.ClsPub.Enum_BillStatus.BillStatus_View; this.Sub_OperStatus(); } } private void bclk_Click(object sender, EventArgs e) { //保存列宽 DBUtility.Xt_BaseBillFun.SaveGrid(grdMain, this.Name); } //增行按钮 private void AddRow_Click(object sender, EventArgs e) { //DBUtility.Xt_BaseBillFun.AddRow(oSumGrid); } //删行按纽 private void DelRow_Click(object sender, EventArgs e) { //DBUtility.Xt_BaseBillFun.DelRow(oSumGrid); } private void mrlk_Click(object sender, EventArgs e) { DBUtility.Xt_BaseBillFun.DefaultGridView(grdMain, this.Name); } //离开单元格 private void grdMain_LeaveCell(object sender, EventArgs e) { //oSumGrid.LeaveCell(); } //网格单元格变化事件 private void grdMain_RowColChange(object sender, EventArgs e) { //// //if (!grdStatus) //{ // return; //} //DBUtility.Xt_BaseBillFun.SetSumGrid(oSumGrid); //// ////if (oSumGrid.Changelock) //// return; ////if(oSumGrid.EditStatus) ////{ // if (!CheckGridRow(oSumGrid.OldCell.Row)) // return; ////} } //放弃 编辑 private void Sub_AbandonBill() { if (BillStatus ==DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew || BillStatus ==DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify) { if (MessageBox.Show("单据尚未保存,是否放弃？", "提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Question) == DialogResult.OK) { //显示第一张单据 this.Sub_First(); } } } private void Sc_ProcessMoveBill_Paint(object sender, PaintEventArgs e)//画线 { Graphics g = this.panel2.CreateGraphics(); Pen p = new Pen(Color.Gray); p.Width = 1; g.DrawLine(p, new Point(txtHMaker.Left, txtHMaker.Top + txtHMaker.Height), new Point(txtHMaker.Left + txtHMaker.Width, txtHMaker.Top + txtHMaker.Height)); g.DrawLine(p, new Point(txtHMakeDate.Left, txtHMakeDate.Top + txtHMakeDate.Height), new Point(txtHMakeDate.Left + txtHMakeDate.Width, txtHMakeDate.Top + txtHMakeDate.Height)); // g.DrawLine(p, new Point(txtHChecker.Left, txtHChecker.Top + txtHChecker.Height), new Point(txtHChecker.Left + txtHChecker.Width, txtHChecker.Top + txtHChecker.Height)); g.DrawLine(p, new Point(txtHCheckDate.Left, txtHCheckDate.Top + txtHCheckDate.Height), new Point(txtHCheckDate.Left + txtHCheckDate.Width, txtHCheckDate.Top + txtHCheckDate.Height)); // g.DrawLine(p, new Point(txtHCloseMan.Left, txtHCloseMan.Top + txtHCloseMan.Height), new Point(txtHCloseMan.Left + txtHCloseMan.Width, txtHCloseMan.Top + txtHCloseMan.Height)); g.DrawLine(p, new Point(txtHCloseDate.Left, txtHCloseDate.Top + txtHCloseDate.Height), new Point(txtHCloseDate.Left + txtHCloseDate.Width, txtHCloseDate.Top + txtHCloseDate.Height)); // g.DrawLine(p, new Point(this.txtHDeleteMan.Left, txtHDeleteMan.Top + txtHDeleteMan.Height), new Point(txtHDeleteMan.Left + txtHDeleteMan.Width, txtHDeleteMan.Top + txtHDeleteMan.Height)); g.DrawLine(p, new Point(txtHDeleteDate.Left, txtHDeleteDate.Top + txtHDeleteDate.Height), new Point(txtHDeleteDate.Left + txtHDeleteDate.Width, txtHDeleteDate.Top + txtHDeleteDate.Height)); // g.DrawLine(p, new Point(this.txtHUpDater.Left, txtHUpDater.Top + txtHUpDater.Height), new Point(txtHUpDater.Left + txtHUpDater.Width, txtHUpDater.Top + txtHUpDater.Height)); g.DrawLine(p, new Point(txtHUpDateDate.Left, txtHUpDateDate.Top + txtHUpDateDate.Height), new Point(txtHUpDateDate.Left + txtHUpDateDate.Width, txtHUpDateDate.Top + txtHUpDateDate.Height)); // g.DrawLine(p, new Point(this.txtHBacker.Left, txtHBacker.Top + txtHBacker.Height), new Point(txtHBacker.Left + txtHBacker.Width, txtHBacker.Top + txtHBacker.Height)); g.DrawLine(p, new Point(txtHBackDate.Left, txtHBackDate.Top + txtHBackDate.Height), new Point(txtHBackDate.Left + txtHBackDate.Width, txtHBackDate.Top + txtHBackDate.Height)); //控件位置设置 } //控件位置 private void Sub_ControlLocation() { //gbUp.Width = P1.Width - 20; //gbUp.Left = 10; //gbUp.Height = P1.Height - 35; //gbUp.Top = 30; } //窗体加载 private void Sc_ProcessMoveBill_Load(object sender, EventArgs e) { //打印初始化 dtpHDate.Value = DateTime.Today; //oSumGrid.NoCol = HSnoCol; //oSumGrid.ogrdMain = grdMain; //oSumGrid.oGridsum = grdSum; this.Text = ModCaption; this.lblCaption.Text = ModCaption; } //首张 private void Sub_First() { BillStatus =DBUtility.ClsPub.Enum_BillStatus.BillStatus_View; BillOld = new DAL.ClsSc_ProcessMoveBill(); if (BillOld.GetFirstBill(ref ClsPub.sExeReturnInfo)) { this.Sub_ShowBill(); } else //没有找到则 变为新增状态 { this.Sub_AddBill(); } } //上张 private void Sub_Prev() { BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_View; if (BillOld.GetPrevousBill(ref ClsPub.sExeReturnInfo,txtHBillNo.Text)) { this.Sub_ShowBill(); } } //下张 private void Sub_Next() { BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_View; if (BillOld.GetNextBill(ref ClsPub.sExeReturnInfo, txtHBillNo.Text)) { this.Sub_ShowBill(); } } //末张 private void Sub_Last() { BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_View; BillOld = new DAL.ClsSc_ProcessMoveBill(); if (BillOld.GetLastBill(ref ClsPub.sExeReturnInfo)) { this.Sub_ShowBill(); } } //审核单据 private void Sub_CheckBill() { if (BillOld.CheckBill(BillOld.omodel.HInterID, ref ClsPub.sExeReturnInfo) == true) { BillChange = true; txtHChecker.Text = ClsPub.CurUserName; txtHCheckDate.Text = BillOld.omodel.HCheckDate; this.Sub_OperStatus();//刷新TOOL按钮 } else { MessageBox.Show("审核失败!原因:" + ClsPub.sExeReturnInfo, "提示"); } } //反审单据 private void Sub_AbandonCheck() { if (BillOld.AbandonCheck(BillOld.omodel.HInterID, ref ClsPub.sExeReturnInfo) == true) { BillChange = true; txtHChecker.Text = ""; txtHCheckDate.Text = ""; this.Sub_OperStatus();//刷新TOOL按钮 } else { MessageBox.Show("反审核失败!原因:" + ClsPub.sExeReturnInfo, "提示"); } } //关闭单据 private void Sub_CloseBill() { if (BillOld.CloseBill(BillOld.omodel.HInterID, ref ClsPub.sExeReturnInfo) == true) { BillChange = true; txtHCloseMan.Text = ClsPub.CurUserName; txtHCloseDate.Text = BillOld.omodel.HCloseDate; this.Sub_OperStatus();//刷新TOOL按钮 } else { MessageBox.Show("关闭失败!原因:" + ClsPub.sExeReturnInfo, "提示"); } } //反关闭单据 private void Sub_Cancel() { if (BillOld.CancelClose(BillOld.omodel.HInterID, ref ClsPub.sExeReturnInfo) == true) { BillChange = true; txtHCloseMan.Text = ""; txtHCloseDate.Text = ""; this.Sub_OperStatus();//刷新TOOL按钮 } else { MessageBox.Show("恢复失败!原因:" + ClsPub.sExeReturnInfo, "提示"); } } //作废单据 private void Sub_Cancelltion() { if (BillOld.Cancelltion(BillOld.omodel.HInterID, ref ClsPub.sExeReturnInfo) == true) { BillChange = true; this.txtHDeleteMan.Text = ClsPub.CurUserName; this.txtHDeleteDate.Text = BillOld.omodel.HDeleteDate; this.Sub_OperStatus();//刷新TOOL按钮 } else { MessageBox.Show("作废失败!原因:" + ClsPub.sExeReturnInfo, "提示"); } } //反作废 private void Sub_AbandonCancelltion() { if (BillOld.AbandonCancelltion(BillOld.omodel.HInterID, ref ClsPub.sExeReturnInfo) == true) { BillChange = true; this.txtHDeleteMan.Text = ""; this.txtHDeleteDate.Text = ""; this.Sub_OperStatus();//刷新TOOL按钮 } else { MessageBox.Show("作废失败!原因:" + ClsPub.sExeReturnInfo, "提示"); } } //新增按纽 private void xz_Click(object sender, EventArgs e) { this.Sub_AddBill(); } //修改按纽 private void xg_Click(object sender, EventArgs e) { this.Sub_EditBill(); } //删除按钮 private void sc_Click(object sender, EventArgs e) { this.Sub_DeleteBill(); } //保存按钮 private void bc_Click(object sender, EventArgs e) { this.Sub_SaveBill(); } //放弃按钮 private void fq_Click(object sender, EventArgs e) { this.Sub_AbandonBill(); } //审核按钮 private void sh_Click(object sender, EventArgs e) { this.Sub_CheckBill(); } //放弃审核按钮 private void qsh_Click(object sender, EventArgs e) { this.Sub_AbandonCheck(); } //关闭按钮 private void gb_Click(object sender, EventArgs e) { this.Sub_CloseBill(); } //恢复按钮 private void hf_Click(object sender, EventArgs e) { this.Sub_Cancel(); } //作废按钮 private void zf_Click(object sender, EventArgs e) { this.Sub_Cancelltion(); } //反作废按钮 private void zc_Click(object sender, EventArgs e) { this.Sub_AbandonCancelltion(); } //首张单据按钮 private void sz_Click(object sender, EventArgs e) { this.Sub_First(); } //上一张按钮 private void syz_Click(object sender, EventArgs e) { this.Sub_Prev(); } //下一张按钮 private void xyz_Click(object sender, EventArgs e) { this.Sub_Next(); } //末张按钮 private void mz_Click(object sender, EventArgs e) { this.Sub_Last(); } //退出按钮 private void tc_Click(object sender, EventArgs e) { this.Close(); } //窗体尺寸变化时 private void Sc_ProcessMoveBill_Resize(object sender, EventArgs e) { //Sub_ControlLocation(); } //根据编辑状态 设置 控件是否允许录入 private void Sub_LrtextStatus(bool TextEnabled) { if (TextEnabled == true) { //控件全部有效 gbUp.Enabled = true; grdMain.BackColor = ClsPub.EditColor; } else { //控件全部无效 gbUp.Enabled = false; grdMain.BackColor = ClsPub.ViewColor; } } //复制单据 private void Sub_CopyBill() { this.BillStatus =DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew; this.Sub_OperStatus();//设置TOOLBAR this.txtHBillNo.Text = ClsPub.CreateBillCode(BillNew.BillType, ref ClsPub.sExeReturnInfo, true);//得到新单号 this.txtHBillNo.Enabled = true; this.txtHBillNo.Focus(); this.txtHMaker.Text = ClsPub.CurUserName; this.txtHMakeDate.Text = ClsPub.GetServerDate(-1); this.txtHChecker.Text = ""; this.txtHCloseDate.Text = ""; this.txtHCloseMan.Text = ""; this.txtHCloseDate.Text = ""; this.txtHDeleteMan.Text = ""; this.txtHDeleteDate.Text = ""; this.txtHUpDater.Text = ""; this.txtHUpDateDate.Text = ""; this.txtHBacker.Text = ""; this.txtHBackDate.Text = ""; } //复制按钮 private void fz_Click(object sender, EventArgs e) { Sub_CopyBill(); } //timer private void timer1_Tick(object sender, EventArgs e) { timer1.Enabled = false; Sub_ControlLocation(); if (BillStatus == DBUtility.ClsPub.Enum_BillStatus.BillStatus_View) { this.Sub_ShowBill(); } else { this.Sub_AddBill(); } //DBUtility.Xt_BaseBillFun.SetSumGrid(oSumGrid); } //窗体卸载 private void Sc_ProcessMoveBill_FormClosing(object sender, FormClosingEventArgs e) { BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew; DBUtility.Xt_BaseBillFun.SaveGrid(grdMain, this.Name); } //新增单据 private void Sub_AddBill() { this.BillNew = new DAL.ClsSc_ProcessMoveBill(); this.BillOld = new DAL.ClsSc_ProcessMoveBill(); this.BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew; this.Sub_OperStatus();//设置TOOLBAR this.Sub_ClearBill();//清空界面 this.txtHBillNo.Text = ClsPub.CreateBillCode(BillNew.BillType, ref ClsPub.sExeReturnInfo, true);//得到新单号（缺少函数） 未完成 this.txtHBillNo.Enabled = true; this.txtHBillNo.Focus(); //this.txtHInnerBillNo.Text = HInnerBillNo; } //TOOLBAR状态 按钮是否灰度 public void Sub_OperStatus() { switch (BillStatus) { case DBUtility.ClsPub.Enum_BillStatus.BillStatus_View: //浏览状态 yl.Enabled = true; xz.Enabled = true; xg.Enabled = true; sc.Enabled = true; AddRow.Enabled = false; DelRow.Enabled = false; bc.Enabled = false; fq.Enabled = false; sz.Enabled = true; syz.Enabled = true; xyz.Enabled = true; mz.Enabled = true; tc.Enabled = true; fz.Enabled = true; //未审核 if (txtHChecker.Text.Trim() == "") { sh.Enabled = true; qsh.Enabled = false; //gb.Enabled = false; //hf.Enabled = false; xg.Enabled = true; sc.Enabled = true; //未审核 pic1.Visible = false; pic1.Image = null; // } else if (txtHCloseMan.Text.Trim() == "" && txtHChecker.Text.Trim() != "")//审核未关闭 { sh.Enabled = false; qsh.Enabled = true; //gb.Enabled = true; //hf.Enabled = false; xg.Enabled = false; sc.Enabled = false; // pic1.Visible = true; pic1.Image = System.Drawing.Image.FromFile(ClsPub.AppPath + @"/Pic/Checked.jpg"); // } else//已关闭 { sh.Enabled = false; qsh.Enabled = false; //gb.Enabled = false; //hf.Enabled = true; xg.Enabled = false; sc.Enabled = false; // pic1.Visible = true; pic1.Image = System.Drawing.Image.FromFile(ClsPub.AppPath + @"/Pic/Closed.jpg"); // } if (txtHDeleteMan.Text.Trim() == "") { //zf.Enabled = true; //zc.Enabled = false; } else //已作废 { //zf.Enabled = false; //zc.Enabled = true; xg.Enabled = false; sc.Enabled = false; AddRow.Enabled = false; DelRow.Enabled = false; bc.Enabled = false; fq.Enabled = false; sh.Enabled = false; qsh.Enabled = false; //gb.Enabled = false; //hf.Enabled = false; // pic1.Visible = true; pic1.Image = System.Drawing.Image.FromFile(ClsPub.AppPath + @"/Pic/Deleted.jpg"); // } Sub_LrtextStatus(false); grdStatus = false; break; case DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew: //新增状态 yl.Enabled = false; xz.Enabled = false; xg.Enabled = false; sc.Enabled = false; AddRow.Enabled = true; DelRow.Enabled = true; bc.Enabled = true; fq.Enabled = true; sh.Enabled = false; qsh.Enabled = false; //gb.Enabled = false; //hf.Enabled = false; //zf.Enabled = false; //zc.Enabled = false; sz.Enabled = false; syz.Enabled = false; xyz.Enabled = false; mz.Enabled = false; tc.Enabled = true; Sub_LrtextStatus(true); grdStatus = true; fz.Enabled = false; //未审核 pic1.Visible = false; pic1.Image = null; // break; case DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify: //修改状态 yl.Enabled = false; xz.Enabled = false; xg.Enabled = false; sc.Enabled = false; AddRow.Enabled = true; DelRow.Enabled = true; bc.Enabled = true; fq.Enabled = true; sh.Enabled = false; qsh.Enabled = false; //gb.Enabled = false; //hf.Enabled = false; //zf.Enabled = false; //zc.Enabled = false; sz.Enabled = false; syz.Enabled = false; xyz.Enabled = false; mz.Enabled = false; tc.Enabled = true; Sub_LrtextStatus(true); grdStatus = true; fz.Enabled = false; //未审核 pic1.Visible = false; pic1.Image = null; // break; } } #endregion #region 读写类 //显示单据 public void Sub_ShowBill() { DAL.ClsGy_Material_View oMater = new DAL.ClsGy_Material_View(); DAL.ClsGy_Unit_View oUnit = new DAL.ClsGy_Unit_View(); DAL.ClsGy_WorkCenter_View oWork = new DAL.ClsGy_WorkCenter_View(); DAL.ClsGy_Source_View oSource = new DAL.ClsGy_Source_View(); DAL.ClsGy_Employee_View oEmp = new DAL.ClsGy_Employee_View(); //判断是否存在单据 if(BillOld.ShowBill(BillOld.omodel.HInterID,ref ClsPub.sExeReturnInfo)==false ) { MessageBox.Show(ClsPub.sExeReturnInfo, "提示"); return; } //清空 Sub_ClearBill(); //grid禁止刷新 //加载表头 if (oMater.GetInfoByID(BillOld.omodel.HMaterID)) { this.txtHMaterID.Tag = oMater.omodel.HItemID.ToString().Trim(); this.txtHMaterID.Text = oMater.omodel.HName; this.txtHMaterNumber.Text = oMater.omodel.HNumber; this.txtHMaterModel.Text = oMater.omodel.HModel; } else { this.txtHMaterID.Text = ""; this.txtHMaterNumber.Text = ""; this.txtHMaterModel.Text = ""; } // if (oUnit.GetInfoByID(BillOld.omodel.HUnitID)) { this.txtHUnitID.Text = oUnit.omodel.HName; this.txtHUnitID.Tag = oUnit.omodel.HItemID.ToString().Trim(); this.txtHUnitNumber.Text = oUnit.omodel.HNumber; } else { this.txtHUnitID.Text = ""; this.txtHUnitNumber.Text = ""; } // if (oWork.GetInfoByID(BillOld.omodel.HOutCenterID)) { this.txtHOutCenterID.Tag = oWork.omodel.HItemID.ToString().Trim(); this.txtHOutCenterID.Text = oWork.omodel.HName; this.txtHOutCenterNumber.Text = oWork.omodel.HNumber; } else { this.txtHOutCenterID.Text = ""; this.txtHOutCenterNumber.Text = ""; } // if (oWork.GetInfoByID(BillOld.omodel.HInCenterID)) { this.txtHInCenterID.Tag = oWork.omodel.HItemID.ToString().Trim(); this.txtHInCenterID.Text = oWork.omodel.HName; this.txtHInCenterNumber.Text = oWork.omodel.HNumber; } else { this.txtHInCenterID.Text = ""; this.txtHInCenterNumber.Text = ""; } // if (oSource.GetInfoByID(BillOld.omodel.HOutSourceID)) { this.txtHOutSourceID.Tag = oSource.omodel.HItemID.ToString().Trim(); this.txtHOutSourceID.Text = oSource.omodel.HName; this.txtHOutSourceNumber.Text = oSource.omodel.HNumber; } else { this.txtHOutSourceID.Text = ""; this.txtHOutSourceNumber.Text = ""; } // if (oSource.GetInfoByID(BillOld.omodel.HInSourceID)) { this.txtHInSourceID.Tag = oSource.omodel.HItemID.ToString().Trim(); this.txtHInSourceID.Text = oSource.omodel.HName; this.txtHInSourceNumber.Text = oSource.omodel.HNumber; } else { this.txtHInSourceID.Text = ""; this.txtHInSourceNumber.Text = ""; } // if (oEmp.GetInfoByID(BillOld.omodel.HOutEmpID)) { this.txtHOutEmpID.Text = oEmp.omodel.HName; this.txtHOutEmpID.Tag = oEmp.omodel.HItemID.ToString().Trim(); //this.txtHOutEmpNumber.Text = oEmp.omodel.HNumber; } else { this.txtHOutEmpID.Text = ""; //this.txtHOutEmpNumber.Text = ""; } // if (oEmp.GetInfoByID(BillOld.omodel.HInEmpID)) { this.txtHInEmpID.Text = oEmp.omodel.HName; this.txtHInEmpID.Tag = oEmp.omodel.HItemID.ToString().Trim(); //this.txtHInEmpNumber.Text = oEmp.omodel.HNumber; } else { this.txtHInEmpID.Text = ""; //this.txtHInEmpNumber.Text = ""; } // this.dtpHDate.Value = BillOld.omodel.HDate; this.txtHBillNo.Text = BillOld.omodel.HBillNo; this.txtHRemark.Text = BillOld.omodel.HRemark; // this.txtHICMOBillNo.Text = BillOld.omodel.HICMOBillNo; this.txtHBatchNo.Text = BillOld.omodel.HBatchNo; this.txtHOutProcPlanBillNo.Text = BillOld.omodel.HOutProcPlanBillNo; this.txtHOutProcPlanInterID.Text = BillOld.omodel.HOutProcPlanInterID.ToString(); this.txtHOutProcPlanEntryID.Text = BillOld.omodel.HOutProcPlanEntryID.ToString(); this.txtHInProcPlanBillNo.Text = BillOld.omodel.HInProcPlanBillNo; this.txtHInProcPlanInterID.Text = BillOld.omodel.HInProcPlanInterID.ToString(); this.txtHInProcPlanEntryID.Text = BillOld.omodel.HInProcPlanEntryID.ToString(); this.txtHQty.Text = BillOld.omodel.HQty.ToString(); this.txtHSeOrderBillNo.Text = BillOld.omodel.HSeOrderBillNo; this.txtHSeOrderInterID.Text = BillOld.omodel.HSeOrderInterID.ToString(); this.txtHSeOrderEntryID.Text = BillOld.omodel.HSeOrderEntryID.ToString(); // this.txtHBacker.Text = BillOld.omodel.HBacker; this.txtHBackDate.Text = BillOld.omodel.HBackDate; this.txtHChecker.Text = BillOld.omodel.HChecker; this.txtHCheckDate.Text = BillOld.omodel.HCheckDate; this.txtHMaker.Text = BillOld.omodel.HMaker; this.txtHMakeDate.Text = BillOld.omodel.HMakeDate; this.txtHUpDater.Text = BillOld.omodel.HUpDater; this.txtHUpDateDate.Text = BillOld.omodel.HUpDateDate; this.txtHCloseMan.Text = BillOld.omodel.HCloseMan; this.txtHCloseDate.Text = BillOld.omodel.HCloseDate; this.txtHDeleteMan.Text = BillOld.omodel.HDeleteMan; this.txtHDeleteDate.Text = BillOld.omodel.HDeleteDate; //加载表体 int i = 0; foreach (Model.ClsSc_ProcessMoveBillSub oSub in BillOld.DetailColl) { if (i >= grdMain.RowCount - 1) grdMain.Rows.Add(); grdMain.Rows[i].Cells[HTagCol].Value = "*"; // grdMain.Rows[i].Cells[HProcIDCol].Value = oSub.HProcID.ToString(); // if (oProc.GetInfoByID(oSub.HProcID)) // { // grdMain.Rows[i].Cells[HProcNumberCol].Value = oProc.omodel.HNumber; // grdMain.Rows[i].Cells[HProcNameCol].Value = oProc.omodel.HName; // } // else // { // grdMain.Rows[i].Cells[HProcNumberCol].Value = ""; // grdMain.Rows[i].Cells[HProcNameCol].Value = ""; // } // // // grdMain.Rows[i].Cells[HGroupIDCol].Value = oSub.HGroupID.ToString(); // if (oGroup.GetInfoByID(oSub.HGroupID)) // { // grdMain.Rows[i].Cells[HGroupNumberCol].Value = oGroup.omodel.HNumber; // grdMain.Rows[i].Cells[HGroupNameCol].Value = oGroup.omodel.HName; // } // else // { // grdMain.Rows[i].Cells[HGroupNumberCol].Value = ""; // grdMain.Rows[i].Cells[HGroupNameCol].Value = ""; // } // // // grdMain.Rows[i].Cells[HWorkerIDCol].Value = oSub.HWorkerID.ToString(); // if (oEmp.GetInfoByID(oSub.HWorkerID)) // { // grdMain.Rows[i].Cells[HWorkerNumberCol].Value = oEmp.omodel.HNumber; // grdMain.Rows[i].Cells[HWorkerNameCol].Value = oEmp.omodel.HName; // } // else // { // grdMain.Rows[i].Cells[HWorkerNumberCol].Value = ""; // grdMain.Rows[i].Cells[HWorkerNameCol].Value = ""; // } // // // grdMain.Rows[i].Cells[HQtyCol].Value = oSub.HQty.ToString(); // grdMain.Rows[i].Cells[HPlanBeginDateCol].Value = oSub.HPlanBeginDate.ToShortDateString(); // grdMain.Rows[i].Cells[HPlanEndDateCol].Value = oSub.HPlanEndDate.ToShortDateString(); // grdMain.Rows[i].Cells[HPlanTimesCol].Value = oSub.HPlanTimes.ToString(); // grdMain.Rows[i].Cells[HSeOrderInterIDCol].Value = oSub.HSeOrderInterID.ToString(); // grdMain.Rows[i].Cells[HSeOrderEntryIDCol].Value = oSub.HSeOrderEntryID.ToString(); // grdMain.Rows[i].Cells[HSeOrderBillNoCol].Value = oSub.HSeOrderBillNo; // grdMain.Rows[i].Cells[HICMOBillNoCol].Value = oSub.HICMOBillNo; // grdMain.Rows[i].Cells[HICMOInterIDCol].Value = oSub.HICMOInterID.ToString(); // grdMain.Rows[i].Cells[HProcPlanInterIDCol].Value = oSub.HProcPlanInterID.ToString(); // grdMain.Rows[i].Cells[HProcPlanEntryIDCol].Value = oSub.HProcPlanEntryID.ToString(); // grdMain.Rows[i].Cells[HProcPlanBillNoCol].Value = oSub.HProcPlanBillNo; // grdMain.Rows[i].Cells[HRemarkCol].Value = oSub.HRemark; // // // grdMain.Rows[i].Cells[HCloseManCol].Value = oSub.HCloseMan; // //grdMain.Rows[i].Cells[HCloseTypeCol].Value = oSub.HCloseType ; // grdMain.Rows[i].Cells[HSourceInterIDCol].Value = oSub.HSourceInterID.ToString(); // grdMain.Rows[i].Cells[HSourceEntryIDCol].Value = oSub.HSourceEntryID.ToString(); // grdMain.Rows[i].Cells[HSourceBillNoCol].Value = oSub.HSourceBillNo; // grdMain.Rows[i].Cells[HSourceBillTypeCol].Value = oSub.HSourceBillType; // grdMain.Rows[i].Cells[HRelationQtyCol].Value = oSub.HRelationQty.ToString(); // grdMain.Rows[i].Cells[HRelationMoneyCol].Value = oSub.HRelationMoney.ToString(); i = i + 1; } //GRID允许刷新 //DBUtility.Xt_BaseBillFun.SetSumGrid(oSumGrid); // Sub_OperStatus(); } //单据完整性判断 未完成 private bool Sub_AllowSave() { //必输项目是否为空 if (ClsPub.isLong(txtHMaterID.Tag) == 0) { MessageBox.Show("产品没有选择！", "提示"); return false; } if (ClsPub.isLong(txtHUnitID.Tag) == 0) { MessageBox.Show("单位没有选择！", "提示"); return false; } if (ClsPub.isLong(txtHOutCenterID.Tag) == 0) { MessageBox.Show("转出工作中心没有选择！", "提示"); return false; } if (ClsPub.isLong(txtHInCenterID.Tag) == 0) { MessageBox.Show("接收工作中心没有选择！", "提示"); return false; } //单据号是否重复 if (BillNew.IsExistBillNo(ref ClsPub.sExeReturnInfo, txtHBillNo.Text.Trim(), BillStatus, BillOld.omodel.HInterID)) { MessageBox.Show("单据号重复！", "提示"); return false; } return true; } //保存单据 private bool Sub_SaveBill() { Model.ClsSc_ProcessMoveBillSub oBillSub = new Model.ClsSc_ProcessMoveBillSub(); Int32 i; bool bResult; BillNew = new DAL.ClsSc_ProcessMoveBill(); if (!Sub_AllowSave())//单据完整性判断 return false; //赋值ID if (BillStatus ==DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify) BillNew.omodel.HInterID = BillOld.omodel.HInterID; //主类赋值 BillNew.omodel.HYear = 2011; BillNew.omodel.HPeriod = 1; BillNew.omodel.HBillNo = this.txtHBillNo.Text.Trim(); //在赋值类前就处理好字符串和数字 BillNew.omodel.HDate = this.dtpHDate.Value; BillNew.omodel.HICMOBillNo = this.txtHICMOBillNo.Text.Trim(); BillNew.omodel.HMaterID = ClsPub.isLong(this.txtHMaterID.Tag); BillNew.omodel.HUnitID = ClsPub.isLong(this.txtHUnitID.Tag); BillNew.omodel.HBatchNo = this.txtHBatchNo.Text.Trim(); BillNew.omodel.HOutProcPlanBillNo = this.txtHOutProcPlanBillNo.Text.Trim(); BillNew.omodel.HOutProcPlanInterID = ClsPub.isLong(this.txtHOutProcPlanInterID.Tag); BillNew.omodel.HOutProcPlanEntryID = ClsPub.isLong(this.txtHOutProcPlanEntryID.Tag); BillNew.omodel.HInProcPlanBillNo = this.txtHInProcPlanBillNo.Text.Trim(); BillNew.omodel.HInProcPlanInterID = ClsPub.isLong(this.txtHInProcPlanInterID.Tag); BillNew.omodel.HInProcPlanEntryID = ClsPub.isLong(this.txtHInProcPlanEntryID.Tag); BillNew.omodel.HOutCenterID = ClsPub.isLong(this.txtHOutCenterID.Tag); BillNew.omodel.HInCenterID = ClsPub.isLong(this.txtHInCenterID.Tag); BillNew.omodel.HOutSourceID = ClsPub.isLong(this.txtHOutSourceID.Tag); BillNew.omodel.HInSourceID = ClsPub.isLong(this.txtHInSourceID.Tag); BillNew.omodel.HQty = ClsPub.isDoule(this.txtHQty.Text); BillNew.omodel.HOutEmpID = ClsPub.isLong(this.txtHOutEmpID.Tag); BillNew.omodel.HInEmpID = ClsPub.isLong(this.txtHInEmpID.Tag); BillNew.omodel.HSeOrderBillNo = this.txtHSeOrderBillNo.Text.Trim(); BillNew.omodel.HSeOrderInterID = ClsPub.isLong(this.txtHSeOrderInterID.Tag); BillNew.omodel.HSeOrderEntryID = ClsPub.isLong(this.txtHSeOrderEntryID.Tag); BillNew.omodel.HRemark = this.txtHRemark.Text.Trim(); //明细类赋值 BillNew.DetailColl=new List(); for (i = 0; i <= grdMain.RowCount - 1; i++) { // if (ClsPub.isLong( grdMain.Rows[i].Cells[HProcIDCol].Value) != 0 ) // { // Model.ClsSc_ProcessMoveBillSub oSub = new Model.ClsSc_ProcessMoveBillSub(); // oSub.HEntryID = i; // // // oSub.HProcID = DBUtility.ClsPub.isLong(grdMain.Rows[i].Cells[HProcIDCol].Value); // oSub.HProcNumber = DBUtility.ClsPub.isStrNull(grdMain.Rows[i].Cells[HProcNumberCol].Value); // oSub.HGroupID = DBUtility.ClsPub.isLong(grdMain.Rows[i].Cells[HGroupIDCol].Value); // oSub.HGroupNumber = DBUtility.ClsPub.isStrNull(grdMain.Rows[i].Cells[HGroupNumberCol].Value); // oSub.HWorkerID = DBUtility.ClsPub.isLong(grdMain.Rows[i].Cells[HWorkerIDCol].Value); // oSub.HWorkerNumber = DBUtility.ClsPub.isStrNull(grdMain.Rows[i].Cells[HWorkerNumberCol].Value); // oSub.HQty = DBUtility.ClsPub.isDoule(grdMain.Rows[i].Cells[HQtyCol].Value); // oSub.HPlanBeginDate = DBUtility.ClsPub.isDate(grdMain.Rows[i].Cells[HPlanBeginDateCol].Value); // oSub.HPlanEndDate = DBUtility.ClsPub.isDate(grdMain.Rows[i].Cells[HPlanEndDateCol].Value); // oSub.HPlanTimes = DBUtility.ClsPub.isSingle(grdMain.Rows[i].Cells[HPlanTimesCol].Value); // oSub.HSeOrderInterID = DBUtility.ClsPub.isLong(grdMain.Rows[i].Cells[HSeOrderInterIDCol].Value); // oSub.HSeOrderEntryID = DBUtility.ClsPub.isLong(grdMain.Rows[i].Cells[HSeOrderEntryIDCol].Value); // oSub.HSeOrderBillNo = DBUtility.ClsPub.isStrNull(grdMain.Rows[i].Cells[HSeOrderBillNoCol].Value); // oSub.HICMOBillNo = DBUtility.ClsPub.isStrNull(grdMain.Rows[i].Cells[HICMOBillNoCol].Value); // oSub.HICMOInterID = DBUtility.ClsPub.isLong(grdMain.Rows[i].Cells[HICMOInterIDCol].Value); // oSub.HProcPlanInterID = DBUtility.ClsPub.isLong(grdMain.Rows[i].Cells[HProcPlanInterIDCol].Value); // oSub.HProcPlanEntryID = DBUtility.ClsPub.isLong(grdMain.Rows[i].Cells[HProcPlanEntryIDCol].Value); // oSub.HProcPlanBillNo = DBUtility.ClsPub.isStrNull(grdMain.Rows[i].Cells[HProcPlanBillNoCol].Value); // // // oSub.HRemark = DBUtility.ClsPub.isStrNull(grdMain.Rows[i].Cells[HRemarkCol].Value); // oSub.HSourceInterID = DBUtility.ClsPub.isLong(grdMain.Rows[i].Cells[HSourceInterIDCol].Value); // oSub.HSourceEntryID = DBUtility.ClsPub.isLong(grdMain.Rows[i].Cells[HSourceEntryIDCol].Value); // oSub.HSourceBillNo = DBUtility.ClsPub.isStrNull(grdMain.Rows[i].Cells[HSourceBillNoCol].Value); // oSub.HSourceBillType = DBUtility.ClsPub.isStrNull(grdMain.Rows[i].Cells[HSourceBillTypeCol].Value); // oSub.HRelationQty = DBUtility.ClsPub.isDoule(grdMain.Rows[i].Cells[HRelationQtyCol].Value); // oSub.HRelationMoney = DBUtility.ClsPub.isDoule(grdMain.Rows[i].Cells[HRelationMoneyCol].Value); // BillNew.DetailColl.Add(oSub); } //} //保存完毕后处理 if (BillStatus == DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew) { bResult = BillNew.AddBill(ref ClsPub.sExeReturnInfo ); } else { bResult = BillNew.ModifyBill(BillNew.omodel.HInterID, ref ClsPub.sExeReturnInfo); } //提示 if (bResult == true) { BillChange = true; MessageBox.Show("单据存盘完毕!单据号:" + this.txtHBillNo.Text.Trim(), "提示"); if (BillStatus == DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew) { BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_View; BillOld.omodel.HInterID = BillNew.omodel.HInterID; this.Sub_ShowBill(); } else if (BillStatus == DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify) { BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_View; } this.Sub_OperStatus(); return true; } else { MessageBox.Show("保存失败!原因:" + ClsPub.sExeReturnInfo, "提示"); return false; } } #endregion #region 窗体处理方法 //初始化GRID private void initGrid() { //// //grdMain.ColumnCount = 11; //总列数 //DBUtility.Xt_BaseBillFun.initGridFst(grdMain, this.Name); ////// //grdMain.Columns[HSnoCol].HeaderText = "序号"; //grdMain.Columns[HRemarkCol].HeaderText = "备注"; //// //// //grdMain.Columns[HCloseManCol].HeaderText = "行关闭"; //grdMain.Columns[HCloseTypeCol].HeaderText = "关闭类型"; //grdMain.Columns[HSourceInterIDCol].HeaderText = "源单主内码"; //grdMain.Columns[HSourceEntryIDCol].HeaderText = "源单子内码"; //grdMain.Columns[HSourceBillNoCol].HeaderText = "源单单号"; //grdMain.Columns[HSourceBillTypeCol].HeaderText = "源单类型"; //grdMain.Columns[HRelationQtyCol].HeaderText = "关联数量"; //grdMain.Columns[HRelationMoneyCol].HeaderText = "关联金额"; ////格式化 //grdMain.Columns[HTagCol].Visible = false; //隐藏列 ////设置可编辑列 //string sAllowCol = HRemarkCol.ToString(); ////设置合计列 //string sTotalCol = HRelationQtyCol.ToString(); //// //DBUtility.Xt_BaseBillFun.initGridLast(sAllowCol, sTotalCol,oSumGrid); } //公式重算 private void RowCount(int sRow, int sTag) { //if (sTag == 0) //{ // //金额列=数量*单价 // double sMoney = 0; // sMoney = ClsPub.isDoule(grdMain.get_TextMatrix(sRow, HPriceCol)) * ClsPub.isDoule(grdMain.get_TextMatrix(sRow, HQtyCol)); // grdMain.set_TextMatrix(sRow, HMoneyCol, sMoney.ToString()); //} //else //{ // //单价列=金额/数量 // double sMoney = 0; //} } //选择 部门按钮 private void cmdHDeptID_Click(object sender, EventArgs e) { DAL.ClsGy_Department_View oDept = new DAL.ClsGy_Department_View(); oDept.WherePart = txtHInCenterID.Text.Trim(); if (oDept.RefreshView()) { txtHInCenterID.Text = oDept.oModel.HName; txtHInCenterID.Tag = oDept.oModel.HItemID.ToString(); } else { txtHInCenterID.Text = ""; } } private void txtHDeptID_TextChanged(object sender, EventArgs e) { if (txtHInCenterID.Text.Trim()=="") { txtHInCenterID.Tag = "0"; txtHInCenterNumber.Text = ""; } } //核对选择的内容 public bool CheckGridCell(Cell oCell) { int Row; int Col; Row = oCell.Row; Col = oCell.Col; //if (ClsPub.isStrNull(grdMain.get_TextMatrix(Row, HTagCol)) != "*") //{ // return true; //} //grdMain.Redraw = VSFlex7.RedrawSettings.flexRDNone; //判断选中列 // // grdMain.Rows[Row].Cells[HTagCol].Value = "*"; //oSumGrid.EditStatus = false; return true; } //是否是空行 private bool IsNullRow(int Row) { //return DBUtility.Xt_BaseBillFun.IsNullRow(Row, HProcIDCol,grdMain); return false; } //'判断网格行的录入是否正确 private bool CheckGridRow(int Row) { Cell oCell = new Cell(); int c = 0; //if (ClsPub.isStrNull(grdMain.get_TextMatrix(Row, HTagCol)) != "*") //{ // return true; //} // for (c = 0; c < grdMain.ColumnCount; c++) { oCell.Row = Row; oCell.Col = c; //if (!CheckGridCell(oCell)) // return false; } return true; } //帮助函数 private void Sub_GridKey(int sKeyCode, int sRow, int sCol, DataGridViewTextBoxEditingControl oEdit) { //DAL.ClsGy_Process_View oProc = new DAL.ClsGy_Process_View(); //DAL.ClsGy_Group_View oGroup = new DAL.ClsGy_Group_View(); //DAL.ClsGy_Employee_View oEmp = new DAL.ClsGy_Employee_View(); //if (!grdStatus) //{ // return; //} ////if (oSumGrid.FindAllowEditCol(sCol)) ////{ //oSumGrid.EditStatus = true; ////} ////else ////{ //// return; ////} //switch (sKeyCode) //{ // case 118: //F7 // { // //switch (sCol) // //{ // // case HProcNumberCol: // // oProc.WherePart = ""; // // if (oProc.RefreshView()) // // { // // grdMain.Rows[sRow].Cells[HProcIDCol].Value = oProc.oModel.HItemID.ToString(); // // grdMain.Rows[sRow].Cells[HProcNumberCol].Value = oProc.oModel.HNumber; // // grdMain.Rows[sRow].Cells[HProcNameCol].Value = oProc.oModel.HName; // // } // // else // // { // // grdMain.Rows[sRow].Cells[HProcIDCol].Value = 0; // // grdMain.Rows[sRow].Cells[HProcNumberCol].Value = ""; // // grdMain.Rows[sRow].Cells[HProcNameCol].Value = ""; // // } // // break; // // default: // // break; // //} // break; // } // case 117: //F6 // { // switch (sCol) // { // default: // break; // } // break; // } // default: // break; //} } //选原单 private void cmdSourceBillNo_Click(object sender, EventArgs e) { //if (cmbSourceBillType.Text.Trim() == "生产移转单") //幻 //{ // string sWhere = " and HDeptID=" + DBUtility.ClsPub.isLong(txtHDeptID.Tag).ToString(); // DAL.Cls_S_Sc_ICMOSortBill oSc_ICMOSortBill = new DAL.Cls_S_Sc_ICMOSortBill(); // if (oSc_ICMOSortBill.Refresh(sWhere)) //选择原单 // { // FillSelectData(oSc_ICMOSortBill.oBillSelectColl); // } //} //else //{ //} } // private void FillSelectData(List oList,bool b) { DataSet Ds; SQLHelper.ClsCN oCn = new SQLHelper.ClsCN(); //oSumGrid.Changelock = true; int i = -1; foreach (DBUtility.BillSelect oSelectRow in oList) { if (i == -1) { i = i + 1; // if (oSelectRow.BillType == "3715") { //得到信息 Ds = oCn.RunProcReturn("select * from h_v_Sc_ProcessPlanList where hmainid=" + oSelectRow.BillMainID + " and hsubid=" + oSelectRow.BillSubID, "h_v_Sc_ProcessPlanList"); //写入信息 Sub_WriteInForm(Ds.Tables[0], b); } // } } // //oSumGrid.Changelock = false; //DBUtility.Xt_BaseBillFun.SetSumGrid(oSumGrid); } //根据TABLE写入界面 private void Sub_WriteInForm(DataTable oTable, bool b) { ////加载表头 this.txtHICMOBillNo.Text = ClsPub.isStrNull(oTable.Rows[0]["任务单号"]); this.txtHICMOBillNo.Tag = ClsPub.isStrNull(oTable.Rows[0]["HICMOInterID"]); this.txtHMaterNumber.Text = ClsPub.isStrNull( oTable.Rows[0]["物料代码"] ); this.txtHMaterID.Tag = ClsPub.isStrNull(oTable.Rows[0]["HMaterID"]); this.txtHMaterID.Text = ClsPub.isStrNull( oTable.Rows[0]["物料名称"] ); this.txtHMaterModel.Text = ClsPub.isStrNull(oTable.Rows[0]["规格型号"]); this.txtHUnitNumber.Text = ClsPub.isStrNull(oTable.Rows[0]["计量单位代码"]); this.txtHUnitID.Tag = ClsPub.isStrNull(oTable.Rows[0]["HUnitID"]); this.txtHUnitID.Text = ClsPub.isStrNull(oTable.Rows[0]["计量单位"]); if (b) { this.txtHOutProcPlanInterID.Text = ClsPub.isStrNull(oTable.Rows[0]["HMainID"]); this.txtHOutProcPlanEntryID.Text = ClsPub.isStrNull(oTable.Rows[0]["HSubID"]); this.txtHOutProcPlanBillNo.Text = ClsPub.isStrNull(oTable.Rows[0]["单据号"]); this.txtHOutCenterNumber.Text = ClsPub.isStrNull(oTable.Rows[0]["工作中心代码"]); this.txtHOutCenterID.Tag = ClsPub.isStrNull(oTable.Rows[0]["HCenterID"]); this.txtHOutCenterID.Text = ClsPub.isStrNull(oTable.Rows[0]["工作中心"]); this.txtHOutSourceNumber.Text = ClsPub.isStrNull(oTable.Rows[0]["资源代码"]); this.txtHOutSourceID.Tag = ClsPub.isStrNull(oTable.Rows[0]["HSourceID"]); this.txtHOutSourceID.Text = ClsPub.isStrNull(oTable.Rows[0]["生产资源"]); } else { this.txtHInProcPlanInterID.Text = ClsPub.isStrNull(oTable.Rows[0]["HMainID"]); this.txtHInProcPlanEntryID.Text = ClsPub.isStrNull(oTable.Rows[0]["HSubID"]); this.txtHInProcPlanBillNo.Text = ClsPub.isStrNull(oTable.Rows[0]["单据号"]); this.txtHInCenterNumber.Text = ClsPub.isStrNull(oTable.Rows[0]["工作中心代码"]); this.txtHInCenterID.Tag = ClsPub.isStrNull(oTable.Rows[0]["HCenterID"]); this.txtHInCenterID.Text = ClsPub.isStrNull(oTable.Rows[0]["工作中心"]); this.txtHInSourceNumber.Text = ClsPub.isStrNull(oTable.Rows[0]["资源代码"]); this.txtHInSourceID.Tag = ClsPub.isStrNull(oTable.Rows[0]["HSourceID"]); this.txtHInSourceID.Text = ClsPub.isStrNull(oTable.Rows[0]["生产资源"]); } this.txtHSeOrderInterID.Text = ClsPub.isStrNull(oTable.Rows[0]["销售订单主ID"]); this.txtHSeOrderEntryID.Text = ClsPub.isStrNull(oTable.Rows[0]["销售订单子ID"]); this.txtHSeOrderBillNo.Text = ClsPub.isStrNull(oTable.Rows[0]["销售订单号"]); ////加载表体 } private void cmdHMaterID_Click(object sender, EventArgs e) { DAL.ClsGy_Material_View oMater = new DAL.ClsGy_Material_View(); DAL.ClsGy_Unit_View oUnit = new DAL.ClsGy_Unit_View(); if (oMater.RefreshView()) { txtHMaterID.Tag = oMater.omodel.HItemID.ToString(); if (oMater.GetInfoByID(oMater.omodel.HItemID)) { txtHMaterNumber.Text = oMater.omodel.HNumber; txtHMaterID.Text = oMater.omodel.HName; txtHMaterModel.Text = oMater.omodel.HModel; if (oUnit.GetInfoByID(oMater.omodel.HUnitID)) { txtHUnitID.Tag = oUnit.omodel.HItemID.ToString(); txtHUnitID.Text = oUnit.omodel.HName; txtHUnitNumber.Text = oUnit.omodel.HNumber; } else { txtHUnitID.Text = ""; txtHUnitNumber.Text = ""; } } else { txtHMaterID.Text = ""; txtHMaterNumber.Text = ""; txtHMaterModel.Text = ""; txtHUnitID.Text = ""; txtHUnitNumber.Text = ""; } } else { txtHMaterID.Text = ""; txtHMaterNumber.Text = ""; txtHMaterModel.Text = ""; } } private void cmdHUnitID_Click(object sender, EventArgs e) { DAL.ClsGy_Unit_View oUnit = new DAL.ClsGy_Unit_View(); if (oUnit.RefreshView()) { this.txtHUnitID.Text = oUnit.oModel.HName; this.txtHUnitID.Tag = oUnit.oModel.HItemID.ToString(); this.txtHUnitNumber.Text = oUnit.oModel.HNumber; } else { this.txtHUnitID.Text = ""; this.txtHUnitNumber.Text = ""; } } private void cmdHOutCenterID_Click_1(object sender, EventArgs e) { DAL.ClsGy_WorkCenter_View oWork = new DAL.ClsGy_WorkCenter_View(); if (oWork.RefreshView()) { this.txtHOutCenterID.Text = oWork.oModel.HName; this.txtHOutCenterID.Tag = oWork.oModel.HItemID.ToString(); this.txtHOutCenterNumber.Text = oWork.oModel.HNumber; } else { this.txtHOutCenterID.Text = ""; this.txtHOutCenterNumber.Text = ""; } } private void cmdHInCenterID_Click_1(object sender, EventArgs e) { DAL.ClsGy_WorkCenter_View oWork = new DAL.ClsGy_WorkCenter_View(); if (oWork.RefreshView()) { this.txtHInCenterID.Text = oWork.oModel.HName; this.txtHInCenterID.Tag = oWork.oModel.HItemID.ToString(); this.txtHInCenterNumber.Text = oWork.oModel.HNumber; } else { this.txtHInCenterID.Text = ""; this.txtHInCenterNumber.Text = ""; } } private void cmdHOutSourceID_Click(object sender, EventArgs e) { DAL.ClsGy_Source_View oSource = new DAL.ClsGy_Source_View(); if (oSource.RefreshView()) { this.txtHOutSourceID.Text = oSource.oModel.HName; this.txtHOutSourceID.Tag = oSource.oModel.HItemID.ToString(); this.txtHOutSourceNumber.Text = oSource.oModel.HNumber; } else { this.txtHOutSourceID.Text = ""; this.txtHOutSourceNumber.Text = ""; } } private void cmdHInSourceID_Click(object sender, EventArgs e) { DAL.ClsGy_Source_View oSource = new DAL.ClsGy_Source_View(); if (oSource.RefreshView()) { this.txtHInSourceID.Text = oSource.oModel.HName; this.txtHInSourceID.Tag = oSource.oModel.HItemID.ToString(); this.txtHInSourceNumber.Text = oSource.oModel.HNumber; } else { this.txtHInSourceID.Text = ""; this.txtHInSourceNumber.Text = ""; } } private void cmdHOutEmpID_Click(object sender, EventArgs e) { DAL.ClsGy_Employee_View oEmp = new DAL.ClsGy_Employee_View(); if (oEmp.RefreshView()) { this.txtHOutEmpID.Text = oEmp.oModel.HName; this.txtHOutEmpID.Tag = oEmp.oModel.HItemID.ToString(); } else { this.txtHOutEmpID.Text = ""; } } private void cmdHInEmpID_Click(object sender, EventArgs e) { DAL.ClsGy_Employee_View oEmp = new DAL.ClsGy_Employee_View(); if (oEmp.RefreshView()) { this.txtHInEmpID.Text = oEmp.oModel.HName; this.txtHInEmpID.Tag = oEmp.oModel.HItemID.ToString(); } else { this.txtHInEmpID.Text = ""; } } //网格编辑前判断 private void grdMain_CellBeginEdit(object sender, DataGridViewCellCancelEventArgs e) { //int i = grdMain.CurrentCell.ColumnIndex; //if (DBUtility.Xt_BaseBillFun.AllowEdit(grdStatus, oSumGrid,i)) //{ // e.Cancel = true; //} } //网格编辑后处理 private void grdMain_CellEndEdit(object sender, DataGridViewCellEventArgs e) { //DBUtility.Xt_BaseBillFun.SetSumGrid(oSumGrid); //RowCount(e.RowIndex, 0); //计算 金额 单价 //// //if (this.EditingControl != null) //释放事件 //{ // EditingControl.KeyDown -= new KeyEventHandler(this.EditingControl_KeyDown); // this.EditingControl = null; //} } DataGridViewTextBoxEditingControl EditingControl; private void grdMain_CellLeave(object sender, DataGridViewCellEventArgs e) { // //if (!grdStatus) //{ // return; //} //DBUtility.Xt_BaseBillFun.SetSumGrid(oSumGrid); //// ////if (oSumGrid.Changelock) //// return; ////if(oSumGrid.EditStatus) ////{ //if (!CheckGridRow(oSumGrid.OldCell.Row)) // return; ////} } private void grdMain_ColumnWidthChanged(object sender, DataGridViewColumnEventArgs e) { //DBUtility.Xt_BaseBillFun.SetSumGrid(oSumGrid); } private void grdMain_EditingControlShowing(object sender, DataGridViewEditingControlShowingEventArgs e) { if (grdMain.CurrentCell != null) { if (e.Control is DataGridViewTextBoxEditingControl) { this.EditingControl = (DataGridViewTextBoxEditingControl)e.Control; //增加委托处理 this.EditingControl.KeyDown += new KeyEventHandler(this.EditingControl_KeyDown); } } } private void EditingControl_KeyDown(object sender, KeyEventArgs e) { //业务处理 Sub_GridKey(e.KeyValue, grdMain.CurrentRow.Index, grdMain.CurrentCell.ColumnIndex, EditingControl); } private void grdMain_RowHeadersWidthChanged(object sender, EventArgs e) { //DBUtility.Xt_BaseBillFun.SetSumGrid(oSumGrid); } private void grdMain_Scroll(object sender, ScrollEventArgs e) { //DBUtility.Xt_BaseBillFun.SetSumGrid(oSumGrid); //oSumGrid.DisplayCurRow(); } #endregion #region //打印设置 GridppReport Report; //预览 private void yl_Click(object sender, EventArgs e) { //选择打印模板 BLL.Gy_OpenTmp oFrm = new BLL.Gy_OpenTmp(); oFrm.sBillName = ModName; oFrm.sBillModel = ModCaption; oFrm.ShowDialog(); if (oFrm.OKTag == Pub_Class.ClsPub.Enum_OKTag.OKTag_OK) { // Sub_SetReport(oFrm.sOpenTmp); Report.PrintPreview(true); } } private void Sub_SetReport(string sOpenTmp) { // Report = new GridppReport(); Report.LoadFromFile(ClsPub.AppPath + @"\" + sOpenTmp + ".grf"); //here . Report.BeforePostRecord += new _IGridppReportEvents_BeforePostRecordEventHandler(ReportBeforePostRecord); Report.FetchRecord += new _IGridppReportEvents_FetchRecordEventHandler(ReportFetchRecordByDataTable); } private void ReportBeforePostRecord()// { Report.FieldByName("单据号").AsString = txtHBillNo.Text; Report.FieldByName("日期").AsString = dtpHDate.Value.ToString(); Report.FieldByName("部门").AsString = txtHInCenterID.Text; Report.FieldByName("业务员").AsString = txtHMaterID.Text; Report.FieldByName("表头备注").AsString = txtHRemark.Text; } private void ReportFetchRecordByDataTable() { //BLL.Utility.FillRecordToReport(Report, grdMain, grdPrint, HProcIDCol); } #endregion private void txtHMaterID_TextChanged(object sender, EventArgs e) { if (txtHMaterID.Text.Trim() == "") { txtHMaterID.Tag = "0"; txtHMaterNumber.Text = ""; } } private void txtHUnitID_TextChanged(object sender, EventArgs e) { if (txtHUnitID.Text.Trim() == "") { txtHUnitID.Tag = "0"; txtHUnitNumber.Text = ""; } } private void txtHOutCenterID_TextChanged(object sender, EventArgs e) { if (txtHOutCenterID.Text.Trim() == "") { txtHOutCenterID.Tag = "0"; txtHOutCenterNumber.Text = ""; } } private void txtHInCenterID_TextChanged(object sender, EventArgs e) { if (txtHInCenterID.Text.Trim() == "") { txtHInCenterID.Tag = "0"; txtHInCenterNumber.Text = ""; } } private void txtHOutSourceID_TextChanged(object sender, EventArgs e) { if (txtHOutSourceID.Text.Trim() == "") { txtHOutSourceID.Tag = "0"; txtHOutSourceNumber.Text = ""; } } private void txtHInSourceID_TextChanged(object sender, EventArgs e) { if (txtHInSourceID.Text.Trim() == "") { txtHInSourceID.Tag = "0"; txtHInSourceNumber.Text = ""; } } private void txtHOutEmpID_TextChanged(object sender, EventArgs e) { if (txtHOutEmpID.Text.Trim() == "") { txtHOutEmpID.Tag = "0"; } } private void txtHInEmpID_TextChanged(object sender, EventArgs e) { if (txtHInEmpID.Text.Trim() == "") { txtHInEmpID.Tag = "0"; } } private void cmdHOutProcPlanInterID_Click(object sender, EventArgs e) { string sWhere = ""; DAL.Cls_S_Sc_ProcessPlan oSc_ProcessPlan = new DAL.Cls_S_Sc_ProcessPlan(); if (oSc_ProcessPlan.Refresh(sWhere)) //选择原单 { FillSelectData(oSc_ProcessPlan.oBillSelectColl,true ); } } private void cmdHInProcPlanInterID_Click(object sender, EventArgs e) { string sWhere = ""; DAL.Cls_S_Sc_ProcessPlan oSc_ProcessPlan = new DAL.Cls_S_Sc_ProcessPlan(); if (oSc_ProcessPlan.Refresh(sWhere)) //选择原单 { FillSelectData(oSc_ProcessPlan.oBillSelectColl,false); } } private void 关闭ToolStripMenuItem_Click(object sender, EventArgs e) { this.Sub_CloseBill(); } private void 反关闭ToolStripMenuItem_Click(object sender, EventArgs e) { this.Sub_Cancel(); } private void 审核ToolStripMenuItem_Click(object sender, EventArgs e) { this.Sub_CheckBill(); } private void 反审核ToolStripMenuItem_Click(object sender, EventArgs e) { this.Sub_AbandonCheck(); } private void 作废ToolStripMenuItem_Click(object sender, EventArgs e) { this.Sub_Cancelltion(); } private void 撤销作废ToolStripMenuItem_Click(object sender, EventArgs e) { this.Sub_AbandonCancelltion(); } private void 隐藏列设置ToolStripMenuItem_Click(object sender, EventArgs e) { BLL.Gy_GridView_Hide oHide = new BLL.Gy_GridView_Hide(); oHide.KeyItem = this.Name; oHide.oGrd = grdMain; oHide.ShowDialog(); // DBUtility.ClsPub.HideGridView(grdMain, Name, ClsPub.AppPath);//设置隐藏列 } } }