器具管理所有出入库明细加计量单位显示并保存

zzr99

2021-11-04 8fa6f2d3686c60088980f2a41b3cc6b64a09ae31

器具管理所有出入库明细加计量单位显示并保存

 WebAPI/Controllers/MJGL/Sc_MouldMoveStockStepInBillListController .cs

@@ -164,7 +164,7 @@
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HStockOrgID, HOtherOrgID,调出组织代码 HOtherOrgCode,调出组织 HOtherOrgName, HWHID, 调入仓库代码 HWHCode, 调入仓库 HWHName,HSPID, 
                                                调入仓位代码 HSPCode, 调入仓位 HSPName,HSCWHID, 调出仓库代码 HSCWHCode, 调出仓库 HSCWHName,HSCSPID, 
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldMoveStockStepInBillListDetail"), "h_v_Sc_MouldMoveStockStepInBillListDetail");
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldMoveStockStepInBillListDetail"), "h_v_Sc_MouldMoveStockStepInBillListDetail");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
@@ -178,7 +178,7 @@
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HStockOrgID, HOtherOrgID,调出组织代码 HOtherOrgCode,调出组织 HOtherOrgName,  HWHID, 调入仓库代码 HWHCode, 调入仓库 HWHName,HSPID, 
                                                调入仓位代码 HSPCode, 调入仓位 HSPName,HSCWHID, 调出仓库代码 HSCWHCode, 调出仓库 HSCWHName,HSCSPID, 
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldMoveStockStepInBillListDetail where 1 = 1 ");
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldMoveStockStepInBillListDetail where 1 = 1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldMoveStockStepInBillListDetail");


 WebAPI/Controllers/MJGL/Sc_MouldMoveStockStepOutBillController.cs

@@ -164,7 +164,7 @@
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HStockOrgID,调入组织代码 HStockOrgCode,调入组织 HStockOrgName, HOtherOrgID ,调出组织代码 HOtherOrgCode,调出组织 HOtherOrgName, HWHID, 调入仓库代码 HWHCode, 调入仓库 HWHName,HSPID, 
                                                调入仓位代码 HSPCode, 调入仓位 HSPName,HSCWHID, 调出仓库代码 HSCWHCode, 调出仓库 HSCWHName,HSCSPID, 
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldMoveStockStepOutBill"), "h_v_Sc_MouldMoveStockStepOutBill");
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldMoveStockStepOutBill"), "h_v_Sc_MouldMoveStockStepOutBill");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
@@ -178,7 +178,7 @@
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HStockOrgID,调入组织代码 HStockOrgCode,调入组织 HStockOrgName, HOtherOrgID,调出组织代码 HOtherOrgCode,调出组织 HOtherOrgName, HWHID, 调入仓库代码 HWHCode, 调入仓库 HWHName,HSPID, 
                                                调入仓位代码 HSPCode, 调入仓位 HSPName,HSCWHID, 调出仓库代码 HSCWHCode, 调出仓库 HSCWHName,HSCSPID, 
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldMoveStockStepOutBill where 1 = 1 ");
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldMoveStockStepOutBill where 1 = 1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldMoveStockStepOutBill");


 WebAPI/Controllers/MJGL/Sc_MouldOtherOutBillController.cs

@@ -162,7 +162,7 @@
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID, 
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldOtherOutBillList"), "h_v_Sc_MouldOtherOutBillList");
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldOtherOutBillList"), "h_v_Sc_MouldOtherOutBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
@@ -176,7 +176,7 @@
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID, 
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldOtherOutBillList where 1 = 1 ");
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldOtherOutBillList where 1 = 1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldOtherOutBillList");


 WebAPI/Controllers/MJGL/Sc_MouldProdInBillController.cs

@@ -411,6 +411,7 @@
        {
            DataSet ds;
            DataSet ds1;
            List<object> list = new List<object>();
            try
            {
                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
@@ -419,18 +420,9 @@
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,
                                          批次 HBatchNo,设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife,应收数量 HQtyMust,
                                          实收数量 HQty, 单价 HPrice, 金额 HMoney,hwhid1 HWHID, 收料仓库代码 HWHCode,收料仓库 HWHName,
                                          HSPID, 收料仓位代码 HSPCode,收料仓位 HSPName,表体备注 HRemark,HStockOrgID 
                                          HSPID, 收料仓位代码 HSPCode,收料仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位  
                                          FROM h_v_Sc_MouldProdInHouseBillList"), "h_v_Sc_MouldProdInHouseBillList");
                    //查汇总
                    ds1 = oCN.RunProcReturn(string.Format(@"select 模具代码,模具名称,单据号,规格型号,批次,实收数量,hwhid1,收料仓库代码,
                                                收料仓库,表体备注,sum(HMaterID) from h_v_Sc_MouldProdInHouseBillList group by 模具代码,
                                                模具名称,单据号,规格型号,批次,实收数量,hwhid1,收料仓库代码,收料仓库,表体备注"), 
                                                "h_v_Sc_MouldProdInHouseBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                    
                }
                else
                {
@@ -439,16 +431,23 @@
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,
                                          批次 HBatchNo,设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife,应收数量 HQtyMust,
                                          实收数量 HQty, 单价 HPrice, 金额 HMoney,hwhid1 HWHID, 收料仓库代码 HWHCode,收料仓库 HWHName,
                                          HSPID, 收料仓位代码 HSPCode,收料仓位 HSPName,表体备注 HRemark,HStockOrgID 
                                          HSPID, 收料仓位代码 HSPCode,收料仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位  
                                          FROM h_v_Sc_MouldProdInHouseBillList where 1=1");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldProdInHouseBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                }
                //查汇总
                ds1 = oCN.RunProcReturn(string.Format(@"select  物料代码,max(物料名称)物料名称,规格型号,max(单据号)单据号,批次,sum(实收数量)实收数量,
                                            hwhid1,max(收料仓库代码)收料仓库代码,max(收料仓库)收料仓库,表体备注 from h_v_Sc_MouldProdInHouseBillList 
                                            where 1=1 " + sqlWhere + " group by 物料代码,规格型号,hwhid1,批次,表体备注"), "h_v_Sc_MouldProdInHouseBillList");

                list.Add(ds.Tables[0]);
                list.Add(ds1.Tables[0]);
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "获取信息成功！";
                objJsonResult.list = list;

            }
            catch (Exception e)
            {

 WebAPI/Controllers/MJGL/Sc_MouldProdMoveBillListController.cs

@@ -164,7 +164,7 @@
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HStockOrgID,调入组织代码 HStockOrgCode,调入组织 HStockOrgName, HOtherOrgID ,调出组织代码 HOtherOrgCode,调出组织 HOtherOrgName, HWHID, 调入仓库代码 HWHCode, 调入仓库 HWHName,HSPID, 
                                                调入仓位代码 HSPCode, 调入仓位 HSPName,HSCWHID, 调出仓库代码 HSCWHCode, 调出仓库 HSCWHName,HSCSPID, 
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldProdMoveBillList"), "h_v_Sc_MouldProdMoveBillList");
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldProdMoveBillList"), "h_v_Sc_MouldProdMoveBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
@@ -179,7 +179,7 @@
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HStockOrgID,调入组织代码 HStockOrgCode,调入组织 HStockOrgName, HOtherOrgID ,调出组织代码 HOtherOrgCode,调出组织 HOtherOrgName, HWHID, 调入仓库代码 HWHCode, 调入仓库 HWHName,HSPID, 
                                                调入仓位代码 HSPCode, 调入仓位 HSPName,HSCWHID, 调出仓库代码 HSCWHCode, 调出仓库 HSCWHName,HSCSPID, 
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldProdMoveBillList where 1 = 1 ");
                                                调出仓位代码 HSCSPCode, 调出仓位 HSCSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldProdMoveBillList where 1 = 1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldProdMoveBillList");


 WebAPI/Controllers/MJGL/Sc_MouldRepairOutBillController.cs

@@ -478,7 +478,7 @@
                {
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,
                                          批次 HBatchNo,设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife,应收数量 HQtyMust,
                                          实收数量 HQty, HWHID, 仓库代码 HWHCode,仓库 HWHName,子备注 HRemark,HStockOrgID 
                                          实收数量 HQty, HWHID, 仓库代码 HWHCode,仓库 HWHName,子备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位  
                                          FROM h_v_Sc_MouldRepairOutBillList"), "h_v_Sc_MouldRepairOutBillList");

                    objJsonResult.code = "0";
@@ -492,7 +492,7 @@
                    //string sql1 = "select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark  from Sc_MouldRepairCheckBillSub where 1 = 1 ";
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,
                                          批次 HBatchNo,设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife,应收数量 HQtyMust,
                                          实收数量 HQty, HWHID, 仓库代码 HWHCode,仓库 HWHName,子备注 HRemark,HStockOrgID 
                                          实收数量 HQty, HWHID, 仓库代码 HWHCode,仓库 HWHName,子备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位  
                                          FROM h_v_Sc_MouldRepairOutBillList where 1=1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldRepairOutBillList");

 WebAPI/Controllers/Sc_CheckToolsRepairWorkBillListController.cs

@@ -4275,7 +4275,7 @@
                {
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,
                                          批次 HBatchNo,设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife,应收数量 HQtyMust,
                                          实收数量 HQty, HWHID, 仓库代码 HWHCode,仓库 HWHName,子备注 HRemark,HStockOrgID 
                                          实收数量 HQty, HWHID, 仓库代码 HWHCode,仓库 HWHName,子备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位  
                                          FROM h_v_Sc_MouldRepairInBillList"), "h_v_Sc_MouldRepairInBillList");

                    objJsonResult.code = "0";
@@ -4289,7 +4289,7 @@
                    //string sql1 = "select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark  from Sc_MouldRepairCheckBillSub where 1 = 1 ";
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,
                                          批次 HBatchNo,设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife,应收数量 HQtyMust,
                                          实收数量 HQty, HWHID, 仓库代码 HWHCode,仓库 HWHName,子备注 HRemark,HStockOrgID 
                                          实收数量 HQty, HWHID, 仓库代码 HWHCode,仓库 HWHName,子备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位  
                                          FROM h_v_Sc_MouldRepairInBillList where 1=1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldRepairInBillList");

 WebAPI/Controllers/Sc_MouldRepairInBillListController - .cs

@@ -4399,7 +4399,7 @@
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID, 
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldProdBackBillList"), "h_v_Sc_MouldProdBackBillList");
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldProdBackBillList"), "h_v_Sc_MouldProdBackBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
@@ -4413,7 +4413,7 @@
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID, 
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldProdBackBillList where 1 = 1 ");
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldProdBackBillList where 1 = 1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldProdBackBillList");

@@ -4827,7 +4827,7 @@
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID, 
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldProdOutHouseBillList"), "h_v_Sc_MouldProdOutHouseBillList");
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldProdOutHouseBillList"), "h_v_Sc_MouldProdOutHouseBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
@@ -4841,7 +4841,7 @@
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID, 
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldProdOutHouseBillList where 1 = 1 ");
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码,计量单位 FROM h_v_Sc_MouldProdOutHouseBillList where 1 = 1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldProdOutHouseBillList");


 WebAPI/DLL/ClsSc_MouldProdBackBill.cs

@@ -137,7 +137,6 @@
                ", " + omodel.HYear.ToString() + "," + omodel.HPeriod.ToString() + ",'" + omodel.HRemark + "','" + omodel.HMaker+ "',getdate()" +
                ", " + omodel.HSupTypeID.ToString() + "," + omodel.HSupID.ToString() + "," + omodel.HWHID.ToString() + "," + omodel.HSCWHID.ToString() + "," + omodel.HEmpID.ToString() + "," + omodel.HManagerID.ToString() + "," + omodel.HSecManagerID.ToString() +
                ", " + omodel.HKeeperID.ToString() + "," + omodel.HDeptID.ToString() + ",'" + omodel.HExplanation + "','" + omodel.HInnerBillNo + "'," + DBUtility.ClsPub.BoolToString(omodel.HRedBlueFlag) +
          
                ") ");
                //插入子表
                foreach (Model.ClsSc_MouldProdBackBillSub oSub in DetailColl)

 WebAPI/Properties/PublishProfiles/FolderProfile.pubxml.user

@@ -18,25 +18,25 @@
      <publishTime>02/22/2013 08:43:40</publishTime>
    </File>
    <File Include="bin/BLL.dll">
      <publishTime>11/03/2021 17:04:35</publishTime>
      <publishTime>11/04/2021 16:46:04</publishTime>
    </File>
    <File Include="bin/BLL.pdb">
      <publishTime>11/03/2021 17:04:35</publishTime>
      <publishTime>11/04/2021 16:46:04</publishTime>
    </File>
    <File Include="bin/DAL.dll">
      <publishTime>11/03/2021 17:04:33</publishTime>
      <publishTime>11/04/2021 16:46:02</publishTime>
    </File>
    <File Include="bin/DAL.pdb">
      <publishTime>11/03/2021 17:04:33</publishTime>
      <publishTime>11/04/2021 16:46:02</publishTime>
    </File>
    <File Include="bin/Dapper.dll">
      <publishTime>07/22/2016 14:52:40</publishTime>
    </File>
    <File Include="bin/DBUtility.dll">
      <publishTime>11/03/2021 17:04:29</publishTime>
      <publishTime>11/04/2021 16:45:59</publishTime>
    </File>
    <File Include="bin/DBUtility.pdb">
      <publishTime>11/03/2021 17:04:29</publishTime>
      <publishTime>11/04/2021 16:45:59</publishTime>
    </File>
    <File Include="bin/Interop.gregn6Lib.dll">
      <publishTime>08/25/2021 10:28:25</publishTime>
@@ -60,10 +60,10 @@
      <publishTime>07/25/2012 11:48:56</publishTime>
    </File>
    <File Include="bin/Model.dll">
      <publishTime>11/03/2021 17:04:29</publishTime>
      <publishTime>11/04/2021 16:45:59</publishTime>
    </File>
    <File Include="bin/Model.pdb">
      <publishTime>11/03/2021 17:04:29</publishTime>
      <publishTime>11/04/2021 16:45:59</publishTime>
    </File>
    <File Include="bin/Models/ClsSc_MouldScrapOutBillMain.cs">
      <publishTime>08/16/2021 17:23:15</publishTime>
@@ -72,22 +72,22 @@
      <publishTime>08/03/2014 20:33:56</publishTime>
    </File>
    <File Include="bin/Pub_Class.dll">
      <publishTime>11/03/2021 17:04:27</publishTime>
      <publishTime>11/04/2021 16:45:56</publishTime>
    </File>
    <File Include="bin/Pub_Class.pdb">
      <publishTime>11/03/2021 17:04:27</publishTime>
      <publishTime>11/04/2021 16:45:56</publishTime>
    </File>
    <File Include="bin/Pub_Control.dll">
      <publishTime>11/03/2021 17:04:28</publishTime>
      <publishTime>11/04/2021 16:45:57</publishTime>
    </File>
    <File Include="bin/Pub_Control.pdb">
      <publishTime>11/03/2021 17:04:28</publishTime>
      <publishTime>11/04/2021 16:45:57</publishTime>
    </File>
    <File Include="bin/SQLHelper.dll">
      <publishTime>11/03/2021 17:04:28</publishTime>
      <publishTime>11/04/2021 16:45:58</publishTime>
    </File>
    <File Include="bin/SQLHelper.pdb">
      <publishTime>11/03/2021 17:04:28</publishTime>
      <publishTime>11/04/2021 16:45:58</publishTime>
    </File>
    <File Include="bin/stdole.dll">
      <publishTime>05/09/2021 13:35:37</publishTime>
@@ -189,10 +189,10 @@
      <publishTime>11/24/2014 11:18:48</publishTime>
    </File>
    <File Include="bin/WebAPI.dll">
      <publishTime>11/03/2021 17:04:38</publishTime>
      <publishTime>11/04/2021 16:46:08</publishTime>
    </File>
    <File Include="bin/WebAPI.pdb">
      <publishTime>11/03/2021 17:04:38</publishTime>
      <publishTime>11/04/2021 16:46:08</publishTime>
    </File>
    <File Include="bin/WebGrease.dll">
      <publishTime>07/17/2013 17:03:52</publishTime>
@@ -363,7 +363,7 @@
      <publishTime>08/06/2021 22:57:28</publishTime>
    </File>
    <File Include="Web.config">
      <publishTime>11/03/2021 17:05:39</publishTime>
      <publishTime>11/04/2021 16:46:18</publishTime>
    </File>
  </ItemGroup>
</Project>