1

duhe

2023-12-29 aa92a37a3d741875df4da574827ba20c33cf7d4f

1

 BLL/ϵͳ¹«ÓÃCLS/Cls_S_KF_ICInventoryList_IF.cs

@@ -61,8 +61,8 @@
                        oSelect.BatchNo = DBUtility.ClsPub.isStrNull(oFrm.grdMain.Rows[oFrm.grdMain.SelectedRows[i].Index].Cells[BatchNoCol].Value);
                        oSelect.HAuxPropID = DBUtility.ClsPub.isLong(oFrm.grdMain.Rows[oFrm.grdMain.SelectedRows[i].Index].Cells[AuxPropIDCol].Value);
                        oSelect.BillNo = DBUtility.ClsPub.isStrNull(oFrm.grdMain.Rows[oFrm.grdMain.SelectedRows[i].Index].Cells[MTONoCol].Value);
                        oSelect.HProduceDate = DBUtility.ClsPub.isDate(oFrm.grdMain.Rows[oFrm.grdMain.SelectedRows[i].Index].Cells[HProduceDateCol].Value);
                        oSelect.HExpiryDate = DBUtility.ClsPub.isDate(oFrm.grdMain.Rows[oFrm.grdMain.SelectedRows[i].Index].Cells[HExpiryDateCol].Value);
                        oSelect.HProduceDate = DBUtility.ClsPub.isStrNull(oFrm.grdMain.Rows[oFrm.grdMain.SelectedRows[i].Index].Cells[HProduceDateCol].Value);
                        oSelect.HExpiryDate = DBUtility.ClsPub.isStrNull(oFrm.grdMain.Rows[oFrm.grdMain.SelectedRows[i].Index].Cells[HExpiryDateCol].Value);
                        oSelect.BillTitle = mvarReportTitle;
                        oSelect.BillType = mvarItemKey;
                        oBillSelectColl.Add(oSelect);

 DBUtility/»ù´¡×ÊÁÏ/BillSelect.cs

@@ -14,7 +14,7 @@
        public Int64 SPID;
        public string BatchNo;
        public Int64 HAuxPropID;
        public DateTime HProduceDate;   //生产日期
        public DateTime HExpiryDate;    //有效期至
        public string HProduceDate;   //生产日期
        public string HExpiryDate;    //有效期至
    }
}

 Model/Model.csproj

@@ -331,6 +331,10 @@
      <SubType>Code</SubType>
    </Compile>
    <Compile Include="基础资料\基础资料\ClsGy_BadResult_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_InspectInstruMent_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_InspectBasis_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_QualityStd_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_InspectMethod_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_InspectValue_Model .cs" />
    <Compile Include="基础资料\基础资料\ClsGy_BadType_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_BigArea_Model.cs" />

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_BadResult_Model.cs

@@ -12,5 +12,6 @@
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_InspectBasis_Model.cs

New file
@@ -0,0 +1,16 @@
using System;
using System.Collections.Generic;
using System.Text;

namespace Model
{
    public class ClsGy_InspectBasis_Model : DBUtility.ClsGy_Base_Model
    {

        public DateTime HMakeTime;
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_InspectInstruMent_Model.cs

New file
@@ -0,0 +1,16 @@
using System;
using System.Collections.Generic;
using System.Text;

namespace Model
{
    public class ClsGy_InspectInstruMent_Model : DBUtility.ClsGy_Base_Model
    {

        public DateTime HMakeTime;
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_InspectMethod_Model.cs

New file
@@ -0,0 +1,16 @@
using System;
using System.Collections.Generic;
using System.Text;

namespace Model
{
    public class ClsGy_InspectMethod_Model : DBUtility.ClsGy_Base_Model
    {

        public DateTime HMakeTime;
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_InspectValue_Model .cs

@@ -11,5 +11,6 @@
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_QualityStd_Model.cs

New file
@@ -0,0 +1,16 @@
using System;
using System.Collections.Generic;
using System.Text;

namespace Model
{
    public class ClsGy_QualityStd_Model : DBUtility.ClsGy_Base_Model
    {

        public DateTime HMakeTime;
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 WarM/ÌõÂë´òÓ¡/Gy_BarCodeBill.cs

@@ -206,6 +206,10 @@
                cmbHBarCodeType.Items.Add("仪器成品条码规则");
                cmbHBarCodeType.Items.Add("试剂成品条码规则");
            }
            else if (sCapName == "中控")
            {
                cmbHBarCodeType.Items.Add("唯一条码");
            }
            else
            {
                //
@@ -215,20 +219,28 @@
                //cmbHBarCodeType.Items.Add("托盘条码");
            }

            //
            cmbSourceBillType.Items.Add("生产订单");
            cmbSourceBillType.Items.Add("生产汇报单");
            cmbSourceBillType.Items.Add("采购订单");
            cmbSourceBillType.Items.Add("收料通知单");
            cmbSourceBillType.Items.Add("委外订单");
            cmbSourceBillType.Items.Add("工序汇报单");
            cmbSourceBillType.Items.Add("工序流转卡");
            cmbSourceBillType.Items.Add("退货通知单");
            cmbSourceBillType.Items.Add("其他入库单");
            cmbSourceBillType.Items.Add("直接调拨单");
            cmbSourceBillType.Items.Add("采购退料单");
            cmbSourceBillType.Items.Add("生产退料单");
            cmbSourceBillType.Items.Add("组装拆卸单");
            //源单类型
            if (sCapName == "中控")
            {
                cmbSourceBillType.Items.Add("生产汇报单");
                cmbSourceBillType.Items.Add("收料通知单");
            }
            else
            {
                cmbSourceBillType.Items.Add("生产订单");
                cmbSourceBillType.Items.Add("生产汇报单");
                cmbSourceBillType.Items.Add("采购订单");
                cmbSourceBillType.Items.Add("收料通知单");
                cmbSourceBillType.Items.Add("委外订单");
                cmbSourceBillType.Items.Add("工序汇报单");
                cmbSourceBillType.Items.Add("工序流转卡");
                cmbSourceBillType.Items.Add("退货通知单");
                cmbSourceBillType.Items.Add("其他入库单");
                cmbSourceBillType.Items.Add("直接调拨单");
                cmbSourceBillType.Items.Add("采购退料单");
                cmbSourceBillType.Items.Add("生产退料单");
                cmbSourceBillType.Items.Add("组装拆卸单");
            }
            //
            DBUtility.Xt_BaseBillFun.Sub_ClearBill(gbUp);
            //
@@ -754,6 +766,8 @@
            int k = 0;
            Int64 n = 0;                  //同一批生成条码中的第几条
            string sTMNumber = "";      //条码自定义前缀
            string sSourceBillNo = "";       //源单号
            string sSourceEntryID = "";       //行号（源单子ID）
            DataSet Ds;
            //Ds = oCn.RunProcReturn("exec GetLSH '" + ClsPub.GetServerDate(0) + "'", "GetLSH");
            //LSH = ClsPub.isInt(Ds.Tables[0].Rows[0][0]);
@@ -815,6 +829,23 @@
                            Ds = oCn.RunProcReturn("exec h_p_WMS_GetMaxNo '" + sTMNumber + "'", "h_p_WMS_GetMaxNo");    //获取最大流水号
                            //oCn.RunProc("exec h_p_WMS_SetMaxNo '" + sTMNumber + "'");
                            LSH = ClsPub.isLong(Ds.Tables[0].Rows[0][0]);
                        }
                        else if (CampanyName == "中控")
                        {
                            sSourceBillNo = DBUtility.ClsPub.isStrNull(grdMain.Rows[j].Cells[HBillNoCol].Value);
                            sSourceEntryID = DBUtility.ClsPub.isStrNull(grdMain.Rows[j].Cells[HSubIDCol].Value);
                            if (sSourceBillNo == "")
                            {
                                //条码前缀 = ç»„织代码 + ç‰©æ–™ä»£ç  + å¹´ + æœˆ + æ—¥
                                sTMNumber = HOrgNumber + HNumber + sYear + sPeriod + sDay;
                                Ds = oCn.RunProcReturn("exec h_p_WMS_GetMaxNo '" + sTMNumber + "'", "h_p_WMS_GetMaxNo");    //获取最大流水号
                                LSH = ClsPub.isLong(Ds.Tables[0].Rows[0][0]);
                            }
                            else
                            {
                                //条码 = æºå•å•å· + ç‰©æ–™ID + è¡Œå·
                                sTMNumber = sSourceBillNo + HNumber + sSourceEntryID;
                            }
                        }
                        else  //通用方法
                        {
@@ -957,8 +988,30 @@
                        }
                        if (cmbHBarCodeType.Text == "唯一条码")
                        {
                            //条码编号 = æ¡ç å‰ç¼€ + æµæ°´å·
                            TM = sTMNumber + LSH2;
                            if (CampanyName == "中控")
                            {
                                if (sSourceBillNo == "")
                                {
                                    //条码编号 = æ¡ç å‰ç¼€ + æµæ°´å·
                                    TM = sTMNumber + LSH2;
                                }
                                else
                                {
                                    if (HBQty >1)
                                    {
                                        MessageBox.Show("生产汇报单、收料通知单生成条码时，箱数不能大于1！");
                                        bc.Enabled = true;
                                        return;
                                    }
                                    //条码编号 = æ¡ç å‰ç¼€
                                    TM = sTMNumber;
                                }
                            }
                            else
                            {
                                //条码编号 = æ¡ç å‰ç¼€ + æµæ°´å·
                                TM = sTMNumber + LSH2;
                            }
                        }
                        else if (cmbHBarCodeType.Text == "序列码")
                        {
@@ -2631,7 +2684,14 @@
            }
            else
            {
                grdMain.Rows[i].Cells[HMinQtyCol].Value = oTable.Rows[0]["最小包装数"].ToString();
                if (CampanyName == "中控")
                {
                    grdMain.Rows[i].Cells[HMinQtyCol].Value = ClsPub.isDoule(oTable.Rows[0]["未生成条码数量"]);
                }
                else
                {
                    grdMain.Rows[i].Cells[HMinQtyCol].Value = oTable.Rows[0]["最小包装数"].ToString();
                }
            }
            grdMain.Rows[i].Cells[HMakerCol].Value = ClsPub.CurUserName;
            if (cmbSourceBillType.Text.Trim() == "收料通知单"|| cmbSourceBillType.Text.Trim() == "采购订单"
@@ -3623,11 +3683,20 @@
            }
            else
            {
                cmbHBarCodeType.Items.Clear();
                cmbHBarCodeType.Items.Add("唯一条码");
                cmbHBarCodeType.Items.Add("品种条码");
                cmbHBarCodeType.Items.Add("批次条码");
                this.cmbHBarCodeType.SelectedIndex = 0;
                if (CampanyName == "中控")
                {
                    cmbHBarCodeType.Items.Clear();
                    cmbHBarCodeType.Items.Add("唯一条码");
                    this.cmbHBarCodeType.SelectedIndex = 0;
                }
                else
                {
                    cmbHBarCodeType.Items.Clear();
                    cmbHBarCodeType.Items.Add("唯一条码");
                    cmbHBarCodeType.Items.Add("品种条码");
                    cmbHBarCodeType.Items.Add("批次条码");
                    this.cmbHBarCodeType.SelectedIndex = 0;
                }
            }
        }
    }

 WebAPI/Controllers/BLL/Xt_UserController.cs

@@ -2,11 +2,11 @@
using Newtonsoft.Json.Linq;
using Pub_Class;
using System;
using System.IO;
using System.Collections;
using System.Collections.Generic;
using System.Data;
using System.Data.SqlClient;
using System.IO;
using System.Web;
using System.Web.Http;
using WebAPI.Controllers.SCGL.日计划管理;
@@ -369,7 +369,7 @@
        }
        #endregion

        #region ç”¨æˆ·å…³è”供应商保存
        #region ç”¨æˆ·å…³è”供应商保存 Excel导入
        [Route("Xt_User/SaveUserSupper")]
        [HttpPost]
        public object SaveUserSupper([FromBody] JObject msg)
@@ -413,6 +413,259 @@
                return objJsonResult;
            }
        }

        /// æ–‡ä»¶ä¸Šä¼  Gy_Supplier
        [Route("Xt_User/UserSupperBill_Excel")]
        [HttpPost]
        public object UserSupperBill_Excel()
        {
            try
            {
                //获取文件名称
                var file = HttpContext.Current.Request.Files[0];
                //获取文件物理路径
                string ExcelPath = HttpContext.Current.Server.MapPath("~/" + file.FileName);
                //保存文件
                file.SaveAs(ExcelPath);

                NpoiHelper np = new NpoiHelper();
                DataSet ExcelDs = np.ReadExcel(ExcelPath, 1, 1, "0");

                //删除文件
                File.Delete(ExcelPath);

                //创建临时表
                DataTable tb2 = new DataTable("dt2");

                //添加列名
                for (int i = 0; i < ExcelDs.Tables[0].Columns.Count; i++)
                {
                    tb2.Columns.Add(ExcelDs.Tables[0].Rows[0][i].ToString());
                }

                ////Excel模板缺少列 ä½†éœ€è¦ä»Žæ•°æ®åº“中查询出来显示在页面的字段
                tb2.Columns.Add("HItemId", typeof(Int32));//供应商ID

                //添加数据
                for (int i = 1; i < ExcelDs.Tables[0].Rows.Count; i++)
                {
                    DataRow row = tb2.NewRow();
                    for (int j = 0; j < ExcelDs.Tables[0].Columns.Count; j++)
                    {
                        row[j] = ExcelDs.Tables[0].Rows[i][j].ToString();
                    }
                    tb2.Rows.Add(row);
                }


                var error = "";

                ////查询用户关联供应商没有的列
                if (!tb2.Columns.Contains("用户代码"))
                    error += "没有找到【用户代码】的标题,";

                if (!tb2.Columns.Contains("用户名称"))
                    error += "没有找到【用户名称】的标题,";

                if (!tb2.Columns.Contains("供应商代码"))
                    error += "没有找到【供应商代码】的标题,";

                if (!tb2.Columns.Contains("供应商名称"))
                    error += "没有找到【供应商名称】的标题,";

                if (error.Length > 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = $"Excel模板存在错误,{error}\r\n";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                for (int i = 0; i <= tb2.Rows.Count - 1; i++)
                {
                    string czybm = "";
                    string czymc = "";
                    string HNumber = "";
                    string HName = "";

                    //HORGNumber = DBUtility.ClsPub.isStrNull(tb2.Rows[i]["组织编码"].ToString());
                    //HORGName = DBUtility.ClsPub.isStrNull(tb2.Rows[i]["组织"].ToString());
                    czybm = DBUtility.ClsPub.isStrNull(tb2.Rows[i]["用户代码"].ToString());
                    czymc = DBUtility.ClsPub.isStrNull(tb2.Rows[i]["用户名称"].ToString());
                    HNumber = DBUtility.ClsPub.isStrNull(tb2.Rows[i]["供应商代码"].ToString());
                    HName = DBUtility.ClsPub.isStrNull(tb2.Rows[i]["供应商名称"].ToString());
                   
                    int index = i + 1;
                    //检查用户与供应商代码是否都为空
                    if (czybm != "" || HNumber != "")
                    {
                        //查询供应商
                        ds = oCN.RunProcReturn("select * from Gy_Supplier where  HNumber='" + HNumber + "'", "Gy_Supplier");

                        if (ds.Tables[0].Rows.Count == 0)
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "第" + index + "行,供应商:" + HName + ",不存在！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                        else
                        {
                            tb2.Rows[i]["HItemID"] = ds.Tables[0].Rows[0]["HItemID"].ToString(); //供应商ID
                        }
                        //查询用户
                        ds = oCN.RunProcReturn("select * from h_v_Gy_UserList where  czybm='" + czybm + "'", "h_v_Gy_UserList");

                        if (ds.Tables[0].Rows.Count == 0)
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "第" + index + "行,该" + czymc + "用户,不存在！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                        else
                        {
                            tb2.Rows[i]["HItemID"] = ds.Tables[0].Rows[0]["HItemID"].ToString();
                        }

                        //审核代码是否合理
                        if (!DBUtility.ClsPub.AllowNumber(czybm))
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "第" + index + "行,用户代码中不能出现连续‘.’并且首位末位不能为‘.’！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }

                    }
                    else
                    {
                        objJsonResult.code = "1";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "第" + index + "行,用户代码为空";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = error;
                objJsonResult.data = tb2;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
  

        #region ææ–™è®¡åˆ’信息 å¯¼å…¥(保存)
        [Route("Xt_User/UserSupperBill_btnSave")]
        [HttpPost]
        public object UserSupperBill_btnSave([FromBody] JObject sMainSub)
        {
            var _value = sMainSub["sMainSub"].ToString();
            string msg1 = _value.ToString();
            string[] sArray = msg1.Split(new string[] { "&和" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string user = sArray[1].ToString();
            try
            {
               
                List<object> Excel = Newtonsoft.Json.JsonConvert.DeserializeObject<List<object>>(msg2);
                List<Dictionary<string, string>> list = new List<Dictionary<string, string>>();

                foreach (JObject item in Excel)
                {
                    Dictionary<string, string> dic = new Dictionary<string, string>();
                    foreach (var itm in item.Properties())
                    {
                        dic.Add(itm.Name, itm.Value.ToString());
                    }
                    list.Add(dic);
                }

                oCN.BeginTran();
                int i = 1;
                foreach (Dictionary<string, string> item in list)
                {
                    string HSupID = item["HSupID"].ToString();//供应商
                    string HMaterID = item["HMaterID"].ToString();//物料ID
                    string HOrgID = item["HOrgID"].ToString();//组织ID
                    string HSupplierName = item["供应商"].ToString();
                    string HMaterName = item["物料名称"].ToString();
                    string HMaterModel = item["规格型号"].ToString();
                    string HUnitID = item["HUnitID"].ToString();//计量单位
                    string JITType = item["JIT物料分类"].ToString();
                    string JITPSL = item["JIT拉动安全库存量"].ToString();
                    string JITMDSC = item["JIT物料需求供货周期"].ToString();
                    string JIPEB = item["JIT提货经济批量"].ToString();
                    string JITPBCC = item["JIT提货批量对应周期（天）"].ToString();
                    string JISLT = item["JIT供货提前期（天）"].ToString();
                    string JIDLT = item["JIT到货前置期（天）"].ToString();
                    string JITDCD = item["JIT送货控制天数"].ToString();
                    string JIMLC = item["JIT最小起送量"].ToString();
                    string HRemark = item["备注"].ToString();

                    ds = oCN.RunProcReturn("select * from Cg_PODemandPlanConfigBillSub where HMaterID=" + HMaterID + " and HSupplierID=" + HSupID, "Cg_PODemandPlanConfigBillSub");

                    if (ds.Tables[0].Rows.Count == 0)
                    {

                        long HInterID = DBUtility.ClsPub.CreateBillID_Prod("4611", ref DBUtility.ClsPub.sExeReturnInfo);//获得一个新的id
                        string HBillNo = DBUtility.ClsPub.CreateBillCode_Prod("4611", ref DBUtility.ClsPub.sExeReturnInfo, true);//获得一个新的单据号


                        string sql = "insert into Cg_PODemandPlanConfigBillMain(HInterID,HBillNo,HYear,HPeriod,HBillType,HBillSubType,HDate,HBillStatus,HMaker,HMakeDate,HOrgId)" +
                            $"values({HInterID}, '{HBillNo}',{DateTime.Now.Year}, {DateTime.Now.Month}, '4611', '4611', GETDATE(), 1, '{user}', GETDATE(), {HOrgID})";
                        string sql1 = "insert into Cg_PODemandPlanConfigBillSub(HInterID,HEntryID,HRemark,HSupplierID,HSupplierName,HMaterID," +
                       "HMaterName, HMaterModel, HJITMaterGroup, HJITSafeStock, HJITMaterDemand, HJITBatchQty, HDeliveryPeriod, " +
                       "HLeadTime, HLeadTime_Sec, HDeliveryMode, HDeliveryDaysCtrl,HUnitID,HJITMinDeliveryQty)values" +
                       $"({HInterID}, 1, '{HRemark}', {(HSupID == "" ? "0" : HSupID)}, '{HSupplierName}', {(HMaterID == "" ? "0" : HMaterID)}," +
                       $" '{HMaterName}', '{HMaterModel}', '{JITType}', {(JITPSL == "" ? "0" : JITPSL)}, {(JITMDSC == "" ? "0" : JITMDSC)},{(JIPEB == "" ? "0" : JIPEB)},{(JITPBCC == "" ? "0" : JITPBCC)}," +
                       $" {(JISLT == "" ? "0" : JISLT)}, {(JIDLT == "" ? "0" : JIDLT)}, '', {(JITDCD == "" ? "0" : JITDCD)} ,{HUnitID},{JIMLC})";
                        //主表
                        oCN.RunProc(sql);
                        //子表
                        oCN.RunProc(sql1);
                    }
                    else
                    {
                        oCN.RunProc("    update  Cg_PODemandPlanConfigBillSub set HLeadTime=" + JISLT + "  where HMaterID=" + HMaterID + " and HSupplierID=" + HSupID);
                    }

                    i++;
                }

                oCN.Commit();

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "导入成功!";
                objJsonResult.data = null;
                return objJsonResult;
            }
            catch (Exception e)
            {
                LogService.Write(e);
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion
        #endregion

        #region  æ ¹æ®ç”¨æˆ·ç¼–码查找已分配组织列表

 WebAPI/Controllers/BaseSet/Gy_BadReasonController.cs

@@ -814,5 +814,1164 @@
            }
        }
        #endregion

        #region  æ£€éªŒæ–¹æ³•  æŸ¥è¯¢,审核，反审核，禁用，反禁用
        /// <summary>
        /// æ£€éªŒæ–¹æ³•  æŸ¥è¯¢
        /// </summary>
        /// <param name="sWhere"></param>
        /// <param name="user"></param>
        /// <returns></returns>
        [Route("Gy_BadReason/Gy_InspectMethodList")]
        [HttpGet]
        public object Gy_InspectMethodList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                //查看权限
                if (!DBUtility.ClsPub.Security_Log("Gy_InspectMethod_Query", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                string sql1 = "select * from h_v_Gy_InspectMethod where 1 = 1";
                string sql = sql1 + sWhere + " order by æ£€éªŒæ–¹æ³•ä»£ç  ";
                ds = oCN.RunProcReturn(sql, "h_v_Gy_InspectMethod");

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// æ£€éªŒæ–¹æ³•å®¡æ ¸ã€åå®¡æ ¸
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/AuditGy_InspectMethod")]
        [HttpGet]
        public object AuditGy_InspectMethod(int HInterID, int IsAudit, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_InspectMethod_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_InspectMethod where HItemID=" + HInterID, "Gy_InspectMethod");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //审核判断
                {
                    oCN.RunProc("update Gy_InspectMethod set HCheckEmp='" + CurUserName + "',HCheckTime=getdate() where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_InspectMethod set HCheckEmp='',HCheckTime=null where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }



        /// <summary>
        /// æ£€éªŒæ–¹æ³•ç¦ç”¨ã€åç¦ç”¨
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsStop">禁用(0),反禁用(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/StopGy_InspectMethod")]
        [HttpGet]
        public object StopGy_InspectMethod(int HInterID, int IsStop, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_InspectMethod_Close", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "禁用失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_InspectMethod where HItemID=" + HInterID, "Gy_InspectMethod");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsStop == 0)  //禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已禁用!不能再次禁用！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsStop == 1) //反禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未禁用!不需要反禁用!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsStop == 0)  //禁用判断
                {
                    oCN.RunProc("update Gy_InspectMethod set HStopEmp='" + CurUserName + "',HStopTime=getdate(),HStopflag=1 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "禁用成功";
                    objJsonResult.data = null;
                }
                if (IsStop == 1) //反禁用判断
                {
                    oCN.RunProc("update Gy_InspectMethod set HStopEmp='',HStopTime=null,HStopflag=0 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反禁用成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "禁用失败或者反禁用失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  è´¨é‡æ ‡å‡†  æŸ¥è¯¢,审核，反审核，禁用，反禁用
        /// <summary>
        /// è´¨é‡æ ‡å‡†  æŸ¥è¯¢
        /// </summary>
        /// <param name="sWhere"></param>
        /// <param name="user"></param>
        /// <returns></returns>
        [Route("Gy_BadReason/Gy_QualityStdList")]
        [HttpGet]
        public object Gy_QualityStdList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                //查看权限
                if (!DBUtility.ClsPub.Security_Log("Gy_QualityStd_Query", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                string sql1 = "select * from h_v_Gy_QualityStd where 1 = 1";
                string sql = sql1 + sWhere + " order by è´¨é‡æ ‡å‡†ä»£ç  ";
                ds = oCN.RunProcReturn(sql, "h_v_Gy_QualityStd");

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// è´¨é‡æ ‡å‡† å®¡æ ¸ã€åå®¡æ ¸
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/AuditGy_QualityStd")]
        [HttpGet]
        public object AuditGy_QualityStd(int HInterID, int IsAudit, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_QualityStd_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_QualityStd where HItemID=" + HInterID, "Gy_QualityStd");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //审核判断
                {
                    oCN.RunProc("update Gy_QualityStd set HCheckEmp='" + CurUserName + "',HCheckTime=getdate() where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_QualityStd set HCheckEmp='',HCheckTime=null where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }



        /// <summary>
        /// è´¨é‡æ ‡å‡†ç¦ç”¨ã€åç¦ç”¨
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsStop">禁用(0),反禁用(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/StopGy_QualityStd")]
        [HttpGet]
        public object StopGy_QualityStd(int HInterID, int IsStop, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_QualityStd_Close", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "禁用失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_QualityStd where HItemID=" + HInterID, "Gy_QualityStd");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsStop == 0)  //禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已禁用!不能再次禁用！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsStop == 1) //反禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未禁用!不需要反禁用!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsStop == 0)  //禁用判断
                {
                    oCN.RunProc("update Gy_QualityStd set HStopEmp='" + CurUserName + "',HStopTime=getdate(),HStopflag=1 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "禁用成功";
                    objJsonResult.data = null;
                }
                if (IsStop == 1) //反禁用判断
                {
                    oCN.RunProc("update Gy_QualityStd set HStopEmp='',HStopTime=null,HStopflag=0 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反禁用成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "禁用失败或者反禁用失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region ä¸è‰¯ç±»åž‹å®¡æ ¸ã€åå®¡æ ¸
        /// <summary>
        /// 
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/AuditGy_BadType")]
        [HttpGet]
        public object AuditGy_BadType(int HInterID, int IsAudit, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_BadType_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_BadType where HItemID=" + HInterID, "Gy_BadType");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //审核判断
                {
                    oCN.RunProc("update Gy_BadType set HCheckEmp='" + CurUserName + "',HCheckTime=getdate() where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_BadType set HCheckEmp='',HCheckTime=null where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region ä¸è‰¯ç±»åž‹ç¦ç”¨ã€åç¦ç”¨
        /// <summary>
        /// 
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsStop">禁用(0),反禁用(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/StopGy_BadType")]
        [HttpGet]
        public object StopGy_BadType(int HInterID, int IsStop, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_BadType_Stop", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "禁用失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_BadType where HItemID=" + HInterID, "Gy_BadType");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsStop == 0)  //禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已禁用!不能再次禁用！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsStop == 1) //反禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未禁用!不需要反禁用!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsStop == 0)  //禁用判断
                {
                    oCN.RunProc("update Gy_BadType set HStopEmp='" + CurUserName + "',HStopTime=getdate(),HStopflag=1 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "禁用成功";
                    objJsonResult.data = null;
                }
                if (IsStop == 1) //反禁用判断
                {
                    oCN.RunProc("update Gy_BadType set HStopEmp='',HStopTime=null,HStopflag=0 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反禁用成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "禁用失败或者反禁用失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  æ£€éªŒä»ªå™¨  æŸ¥è¯¢,审核，反审核，禁用，反禁用
        /// <summary>
        /// æ£€éªŒä»ªå™¨  æŸ¥è¯¢
        /// </summary>
        /// <param name="sWhere"></param>
        /// <param name="user"></param>
        /// <returns></returns>
        [Route("Gy_BadReason/Gy_InspectInstruMentList")]
        [HttpGet]
        public object Gy_InspectInstruMentList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                //查看权限
                if (!DBUtility.ClsPub.Security_Log("Gy_InspectInstruMent_Query", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                string sql1 = "select * from h_v_Gy_InspectInstruMent where 1 = 1";
                string sql = sql1 + sWhere + " order by æ£€éªŒä»ªå™¨ä»£ç  ";
                ds = oCN.RunProcReturn(sql, "h_v_Gy_InspectInstruMent");

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// æ£€éªŒä»ªå™¨ å®¡æ ¸ã€åå®¡æ ¸
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/AuditGy_InspectInstruMent")]
        [HttpGet]
        public object AuditGy_InspectInstruMent(int HInterID, int IsAudit, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_InspectInstruMent_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_InspectInstruMent where HItemID=" + HInterID, "Gy_InspectInstruMent");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //审核判断
                {
                    oCN.RunProc("update Gy_InspectInstruMent set HCheckEmp='" + CurUserName + "',HCheckTime=getdate() where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_InspectInstruMent set HCheckEmp='',HCheckTime=null where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }



        /// <summary>
        /// æ£€éªŒä»ªå™¨ ç¦ç”¨ã€åç¦ç”¨
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsStop">禁用(0),反禁用(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/StopGy_InspectInstruMent")]
        [HttpGet]
        public object StopGy_InspectInstruMent(int HInterID, int IsStop, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_InspectInstruMent_Close", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "禁用失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_InspectInstruMent where HItemID=" + HInterID, "Gy_InspectInstruMent");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsStop == 0)  //禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已禁用!不能再次禁用！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsStop == 1) //反禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未禁用!不需要反禁用!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsStop == 0)  //禁用判断
                {
                    oCN.RunProc("update Gy_InspectInstruMent set HStopEmp='" + CurUserName + "',HStopTime=getdate(),HStopflag=1 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "禁用成功";
                    objJsonResult.data = null;
                }
                if (IsStop == 1) //反禁用判断
                {
                    oCN.RunProc("update Gy_InspectInstruMent set HStopEmp='',HStopTime=null,HStopflag=0 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反禁用成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "禁用失败或者反禁用失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  æ£€éªŒä¾æ®  æŸ¥è¯¢,审核，反审核，禁用，反禁用
        /// <summary>
        /// æ£€éªŒä¾æ®  æŸ¥è¯¢
        /// </summary>
        /// <param name="sWhere"></param>
        /// <param name="user"></param>
        /// <returns></returns>
        [Route("Gy_BadReason/Gy_InspectBasisList")]
        [HttpGet]
        public object Gy_InspectBasisList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                //查看权限
                if (!DBUtility.ClsPub.Security_Log("Gy_InspectBasis_Query", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                string sql1 = "select * from h_v_Gy_InspectBasis where 1 = 1";
                string sql = sql1 + sWhere + " order by æ£€éªŒä¾æ®ä»£ç  ";
                ds = oCN.RunProcReturn(sql, "h_v_Gy_InspectInstruMent");

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// æ£€éªŒä¾æ® å®¡æ ¸ã€åå®¡æ ¸
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/AuditGy_InspectBasis")]
        [HttpGet]
        public object AuditGy_InspectBasis(int HInterID, int IsAudit, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_InspectBasis_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_InspectBasis where HItemID=" + HInterID, "Gy_InspectBasis");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //审核判断
                {
                    oCN.RunProc("update Gy_InspectBasis set HCheckEmp='" + CurUserName + "',HCheckTime=getdate() where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_InspectBasis set HCheckEmp='',HCheckTime=null where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }



        /// <summary>
        /// æ£€éªŒä¾æ® ç¦ç”¨ã€åç¦ç”¨
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsStop">禁用(0),反禁用(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/StopGy_InspectBasis")]
        [HttpGet]
        public object StopGy_InspectBasis(int HInterID, int IsStop, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_InspectBasis_Close", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "禁用失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_InspectBasis where HItemID=" + HInterID, "Gy_InspectBasis");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsStop == 0)  //禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已禁用!不能再次禁用！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsStop == 1) //反禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未禁用!不需要反禁用!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsStop == 0)  //禁用判断
                {
                    oCN.RunProc("update Gy_InspectBasis set HStopEmp='" + CurUserName + "',HStopTime=getdate(),HStopflag=1 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "禁用成功";
                    objJsonResult.data = null;
                }
                if (IsStop == 1) //反禁用判断
                {
                    oCN.RunProc("update Gy_InspectBasis set HStopEmp='',HStopTime=null,HStopflag=0 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反禁用成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "禁用失败或者反禁用失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

    }
}

 WebAPI/Controllers/WebAPIController.cs

@@ -2120,7 +2120,7 @@

        #endregion

        #region ä¸è‰¯åŽŸå› è®¾ç½®åˆ—表/保存/编辑/删除方法
        #region ä¸è‰¯åŽŸå›   è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// èŽ·å–不良原因列表
        /// </summary>
@@ -2761,7 +2761,7 @@
        #endregion


        #region ä¸è‰¯åŽæžœè®¾ç½®åˆ—表/保存/编辑/删除方法
        #region ä¸è‰¯åŽæžœ è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜ä¸è‰¯åŽæžœ
        /// </summary>
@@ -3051,7 +3051,7 @@
        #endregion


        #region æ£€æµ‹å€¼è®¾ç½®åˆ—表/保存/编辑/删除方法
        #region æ£€æµ‹å€¼  è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜æ£€æµ‹å€¼
        /// </summary>
@@ -3340,6 +3340,1162 @@
        }
        #endregion

        #region æ£€éªŒæ–¹æ³• è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜æ£€éªŒæ–¹æ³•
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("SaveGy_InspectMethodList")]
        [HttpPost]
        public object SaveGy_InspectMethodList([FromBody] JObject msg)
        {
            DataSet ds;
            var _value = msg["msg"].ToString();
            string msg3 = _value.ToString();
            string[] sArray = msg3.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg1 = sArray[0].ToString();
            string msg2 = sArray[1].ToString();

            //查看权限
            if (!DBUtility.ClsPub.Security_Log("Gy_InspectMethod_Edit", 1, false, msg2))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无保存权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }

            Int64 HItemID = 0;
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            //获取最大ID值赋值
            DataSet Maxds = oCN.RunProcReturn("select MAX(HItemID) HItemID from Gy_InspectMethod ", "Gy_InspectMethod");
            if (Maxds != null || Maxds.Tables[0].Rows.Count > 0)
            {
                //HItemID= Maxds.Tables[0].Rows[0]["HItemID"]
                var maxid = Convert.ToInt32(Maxds.Tables[0].Rows[0]["HItemID"]);
                maxid += 1;
                HItemID = maxid;
            }
            ListModels oListModels = new ListModels();
            try
            {
                WebAPI.DLL.ClsGy_InspectMethod_Ctl oBill = new WebAPI.DLL.ClsGy_InspectMethod_Ctl();
                List<Model.ClsGy_InspectMethod_Model> lsmain = new List<Model.ClsGy_InspectMethod_Model>();
                msg1 = msg1.Replace("\\", "");
                msg1 = msg1.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_InspectMethod(msg1);
                foreach (Model.ClsGy_InspectMethod_Model oItem in lsmain)
                {
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (oItem.HName.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！名称不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (!DBUtility.ClsPub.AllowNumber(oItem.HNumber.Trim()))
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码中不能出现连续‘.’并且首位末位不能为‘.’！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //查询数据中是否存在重复代码

                    ds = oCN.RunProcReturn("select * from  Gy_InspectMethod where HStopflag=0 and HNumber='" + oItem.HNumber.Trim() + "'", "Gy_InspectMethod");
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //新增时判断
                    if (oItem.HItemID == 0)
                    {
                        if (ds == null || ds.Tables[0].Rows.Count == 0)
                        {

                        }
                        else
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "保存失败！代码重复！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    else//编辑时判断
                    {
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), oItem.HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    //得到短代码
                    string sShortNumber;
                    sShortNumber = DBUtility.ClsPub.GetShortNumber(oItem.HNumber.Trim());
                    if (sShortNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！短代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oItem.HShortNumber = sShortNumber;//短代码
                    oItem.HEndFlag = true;//末级标志
                    oItem.HLevel = DBUtility.ClsPub.GetLevel(oItem.HNumber.Trim()); //等级
                    oItem.HMakeEmp = msg2; //创建人

                    oBill.oModel = oItem;
                }

                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.oModel.HItemID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddNew();
                }
                else
                {
                    bResult = oBill.ModifyByID(oBill.oModel.HItemID);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }

        /// <summary>
        /// æ£€éªŒæ–¹æ³•èŽ·å–信息
        /// </summary>
        /// <returns></returns>
        [Route("GetGy_InspectMethodDetail")]
        [HttpGet]
        public ApiResult<DataSet> GetGy_InspectMethodDetail(string HID)
        {
            var model = LuBaoSevice.GetGy_InspectMethodBillDetail(HID);
            return model;
        }

        /// <summary>
        /// æ£€éªŒæ–¹æ³•åˆ é™¤åŠŸèƒ½
        /// </summary>
        /// <returns></returns>
        [Route("DeltetGy_InspectMethod")]
        [HttpGet]
        public object DeltetGy_InspectMethod(string HItemID, string user)
        {
            DataSet ds;
            //string ModRightNameCheck = "Sc_ProcessReport_check";
            try
            {
                //删除权限
                if (!DBUtility.ClsPub.Security_Log("Gy_InspectMethod_Drop", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (string.IsNullOrWhiteSpace(HItemID))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HItemID为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oCN.BeginTran();//开始事务
                ds = oCN.RunProcReturn("select * from Gy_InspectMethod where HItemID=" + HItemID, "Gy_InspectMethod");
                if (ds == null || ds.Tables[0].Rows.Count == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有数据，无法删除！";
                    objJsonResult.data = null;
                    return objJsonResult; ;
                }
                //var HStopflag = Convert.ToBoolean(ds.Tables[0].Rows[0]["HStopflag"]);
                //if (HStopflag)
                //{
                //    oCN.RollBack();//回滚事务
                //    objJsonResult.code = "0";
                //    objJsonResult.count = 0;
                //    objJsonResult.Message = "数据已删除无法再次删除！";
                //    objJsonResult.data = null;
                //    return objJsonResult;
                //}

                oCN.RunProc("delete Gy_InspectMethod where HItemID=" + HItemID);
                oCN.Commit();//提交事务
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "数据删除成功！";
                objJsonResult.data = null;
                return objJsonResult; ;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "删除失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  è´¨é‡æ ‡å‡†  è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜è´¨é‡æ ‡å‡†
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("SaveGy_QualityStdList")]
        [HttpPost]
        public object SaveGy_QualityStdList([FromBody] JObject msg)
        {
            DataSet ds;
            var _value = msg["msg"].ToString();
            string msg3 = _value.ToString();
            string[] sArray = msg3.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg1 = sArray[0].ToString();
            string msg2 = sArray[1].ToString();

            //查看权限
            if (!DBUtility.ClsPub.Security_Log("Gy_QualityStd_Edit", 1, false, msg2))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无保存权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }

            Int64 HItemID = 0;
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            //获取最大ID值赋值
            DataSet Maxds = oCN.RunProcReturn("select MAX(HItemID) HItemID from Gy_QualityStd ", "Gy_QualityStd");
            if (Maxds != null || Maxds.Tables[0].Rows.Count > 0)
            {
                //HItemID= Maxds.Tables[0].Rows[0]["HItemID"]
                var maxid = Convert.ToInt32(Maxds.Tables[0].Rows[0]["HItemID"]);
                maxid += 1;
                HItemID = maxid;
            }
            ListModels oListModels = new ListModels();
            try
            {
                WebAPI.DLL.ClsGy_QualityStd_Ctl oBill = new WebAPI.DLL.ClsGy_QualityStd_Ctl();
                List<Model.ClsGy_QualityStd_Model> lsmain = new List<Model.ClsGy_QualityStd_Model>();
                msg1 = msg1.Replace("\\", "");
                msg1 = msg1.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_QualityStd(msg1);
                foreach (Model.ClsGy_QualityStd_Model oItem in lsmain)
                {
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (oItem.HName.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！名称不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (!DBUtility.ClsPub.AllowNumber(oItem.HNumber.Trim()))
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码中不能出现连续‘.’并且首位末位不能为‘.’！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //查询数据中是否存在重复代码

                    ds = oCN.RunProcReturn("select * from  Gy_QualityStd where HStopflag=0 and HNumber='" + oItem.HNumber.Trim() + "'", "Gy_QualityStd");
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //新增时判断
                    if (oItem.HItemID == 0)
                    {
                        if (ds == null || ds.Tables[0].Rows.Count == 0)
                        {

                        }
                        else
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "保存失败！代码重复！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    else//编辑时判断
                    {
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), oItem.HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    //得到短代码
                    string sShortNumber;
                    sShortNumber = DBUtility.ClsPub.GetShortNumber(oItem.HNumber.Trim());
                    if (sShortNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！短代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oItem.HShortNumber = sShortNumber;//短代码
                    oItem.HEndFlag = true;//末级标志
                    oItem.HLevel = DBUtility.ClsPub.GetLevel(oItem.HNumber.Trim()); //等级
                    oItem.HMakeEmp = msg2; //创建人

                    oBill.oModel = oItem;
                }

                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.oModel.HItemID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddNew();
                }
                else
                {
                    bResult = oBill.ModifyByID(oBill.oModel.HItemID);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }

        /// <summary>
        /// è´¨é‡æ ‡å‡†èŽ·å–信息
        /// </summary>
        /// <returns></returns>
        [Route("GetGy_QualityStdDetail")]
        [HttpGet]
        public ApiResult<DataSet> GetGy_QualityStdDetail(string HID)
        {
            var model = LuBaoSevice.GetGy_QualityStdBillDetail(HID);
            return model;
        }

        /// <summary>
        /// è´¨é‡æ ‡å‡†åˆ é™¤åŠŸèƒ½
        /// </summary>
        /// <returns></returns>
        [Route("DeltetGy_QualityStd")]
        [HttpGet]
        public object DeltetGy_QualityStd(string HItemID, string user)
        {
            DataSet ds;
            //string ModRightNameCheck = "Sc_ProcessReport_check";
            try
            {
                //删除权限
                if (!DBUtility.ClsPub.Security_Log("Gy_QualityStd_Drop", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (string.IsNullOrWhiteSpace(HItemID))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HItemID为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oCN.BeginTran();//开始事务
                ds = oCN.RunProcReturn("select * from Gy_QualityStd where HItemID=" + HItemID, "Gy_QualityStd");
                if (ds == null || ds.Tables[0].Rows.Count == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有数据，无法删除！";
                    objJsonResult.data = null;
                    return objJsonResult; ;
                }
                //var HStopflag = Convert.ToBoolean(ds.Tables[0].Rows[0]["HStopflag"]);
                //if (HStopflag)
                //{
                //    oCN.RollBack();//回滚事务
                //    objJsonResult.code = "0";
                //    objJsonResult.count = 0;
                //    objJsonResult.Message = "数据已删除无法再次删除！";
                //    objJsonResult.data = null;
                //    return objJsonResult;
                //}

                oCN.RunProc("delete Gy_QualityStd where HItemID=" + HItemID);
                oCN.Commit();//提交事务
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "数据删除成功！";
                objJsonResult.data = null;
                return objJsonResult; ;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "删除失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  æ£€éªŒä»ªå™¨  è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜æ£€éªŒä»ªå™¨
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("SaveGy_InspectInstruMentList")]
        [HttpPost]
        public object SaveGy_InspectInstruMentList([FromBody] JObject msg)
        {
            DataSet ds;
            var _value = msg["msg"].ToString();
            string msg3 = _value.ToString();
            string[] sArray = msg3.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg1 = sArray[0].ToString();
            string msg2 = sArray[1].ToString();

            //查看权限
            if (!DBUtility.ClsPub.Security_Log("Gy_InspectInstruMent_Edit", 1, false, msg2))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无保存权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }

            Int64 HItemID = 0;
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            //获取最大ID值赋值
            DataSet Maxds = oCN.RunProcReturn("select MAX(HItemID) HItemID from Gy_InspectInstruMent ", "Gy_InspectInstruMent");
            if (Maxds != null || Maxds.Tables[0].Rows.Count > 0)
            {
                //HItemID= Maxds.Tables[0].Rows[0]["HItemID"]
                var maxid = Convert.ToInt32(Maxds.Tables[0].Rows[0]["HItemID"]);
                maxid += 1;
                HItemID = maxid;
            }
            ListModels oListModels = new ListModels();
            try
            {
                WebAPI.DLL.ClsGy_InspectInstruMent_Ctl oBill = new WebAPI.DLL.ClsGy_InspectInstruMent_Ctl();
                List<Model.ClsGy_InspectInstruMent_Model> lsmain = new List<Model.ClsGy_InspectInstruMent_Model>();
                msg1 = msg1.Replace("\\", "");
                msg1 = msg1.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_InspectInstruMent(msg1);
                foreach (Model.ClsGy_InspectInstruMent_Model oItem in lsmain)
                {
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (oItem.HName.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！名称不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (!DBUtility.ClsPub.AllowNumber(oItem.HNumber.Trim()))
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码中不能出现连续‘.’并且首位末位不能为‘.’！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //查询数据中是否存在重复代码

                    ds = oCN.RunProcReturn("select * from  Gy_InspectInstruMent where HStopflag=0 and HNumber='" + oItem.HNumber.Trim() + "'", "Gy_InspectInstruMent");
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //新增时判断
                    if (oItem.HItemID == 0)
                    {
                        if (ds == null || ds.Tables[0].Rows.Count == 0)
                        {

                        }
                        else
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "保存失败！代码重复！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    else//编辑时判断
                    {
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), oItem.HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    //得到短代码
                    string sShortNumber;
                    sShortNumber = DBUtility.ClsPub.GetShortNumber(oItem.HNumber.Trim());
                    if (sShortNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！短代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oItem.HShortNumber = sShortNumber;//短代码
                    oItem.HEndFlag = true;//末级标志
                    oItem.HLevel = DBUtility.ClsPub.GetLevel(oItem.HNumber.Trim()); //等级
                    oItem.HMakeEmp = msg2; //创建人

                    oBill.oModel = oItem;
                }

                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.oModel.HItemID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddNew();
                }
                else
                {
                    bResult = oBill.ModifyByID(oBill.oModel.HItemID);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }

        /// <summary>
        /// æ£€éªŒä»ªå™¨å–信息
        /// </summary>
        /// <returns></returns>
        [Route("GetGy_InspectInstruMentDetail")]
        [HttpGet]
        public ApiResult<DataSet> GetGy_InspectInstruMentDetail(string HID)
        {
            var model = LuBaoSevice.GetGy_InspectInstruMentBillDetail(HID);
            return model;
        }

        /// <summary>
        /// æ£€éªŒä»ªå™¨åˆ é™¤åŠŸèƒ½
        /// </summary>
        /// <returns></returns>
        [Route("DeltetGy_InspectInstruMent")]
        [HttpGet]
        public object DeltetGy_InspectInstruMent(string HItemID, string user)
        {
            DataSet ds;
            //string ModRightNameCheck = "Sc_ProcessReport_check";
            try
            {
                //删除权限
                if (!DBUtility.ClsPub.Security_Log("Gy_InspectInstruMent_Drop", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (string.IsNullOrWhiteSpace(HItemID))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HItemID为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oCN.BeginTran();//开始事务
                ds = oCN.RunProcReturn("select * from Gy_InspectInstruMent where HItemID=" + HItemID, "Gy_InspectInstruMent");
                if (ds == null || ds.Tables[0].Rows.Count == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有数据，无法删除！";
                    objJsonResult.data = null;
                    return objJsonResult; ;
                }
                //var HStopflag = Convert.ToBoolean(ds.Tables[0].Rows[0]["HStopflag"]);
                //if (HStopflag)
                //{
                //    oCN.RollBack();//回滚事务
                //    objJsonResult.code = "0";
                //    objJsonResult.count = 0;
                //    objJsonResult.Message = "数据已删除无法再次删除！";
                //    objJsonResult.data = null;
                //    return objJsonResult;
                //}

                oCN.RunProc("delete Gy_InspectInstruMent where HItemID=" + HItemID);
                oCN.Commit();//提交事务
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "数据删除成功！";
                objJsonResult.data = null;
                return objJsonResult; ;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "删除失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  æ£€éªŒä¾æ®  è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜æ£€éªŒä¾æ®
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("SaveGy_InspectBasisList")]
        [HttpPost]
        public object SaveGy_InspectBasisList([FromBody] JObject msg)
        {
            DataSet ds;
            var _value = msg["msg"].ToString();
            string msg3 = _value.ToString();
            string[] sArray = msg3.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg1 = sArray[0].ToString();
            string msg2 = sArray[1].ToString();

            //查看权限
            if (!DBUtility.ClsPub.Security_Log("Gy_InspectBasis_Edit", 1, false, msg2))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无保存权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }

            Int64 HItemID = 0;
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            //获取最大ID值赋值
            DataSet Maxds = oCN.RunProcReturn("select isNull(MAX(HItemID),0) HItemID from Gy_InspectBasis ", "Gy_InspectBasis");
            if (Maxds != null || Maxds.Tables[0].Rows.Count > 0)
            {
                //HItemID= Maxds.Tables[0].Rows[0]["HItemID"]
                var maxid = Convert.ToInt32(Maxds.Tables[0].Rows[0]["HItemID"]);
                maxid += 1;
                HItemID = maxid;
            }
            ListModels oListModels = new ListModels();
            try
            {
                WebAPI.DLL.ClsGy_InspectBasis_Ctl oBill = new WebAPI.DLL.ClsGy_InspectBasis_Ctl();
                List<Model.ClsGy_InspectBasis_Model> lsmain = new List<Model.ClsGy_InspectBasis_Model>();
                msg1 = msg1.Replace("\\", "");
                msg1 = msg1.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_InspectBasis(msg1);
                foreach (Model.ClsGy_InspectBasis_Model oItem in lsmain)
                {
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (oItem.HName.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！名称不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (!DBUtility.ClsPub.AllowNumber(oItem.HNumber.Trim()))
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码中不能出现连续‘.’并且首位末位不能为‘.’！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //查询数据中是否存在重复代码

                    ds = oCN.RunProcReturn("select * from  Gy_InspectBasis where HStopflag=0 and HNumber='" + oItem.HNumber.Trim() + "'", "Gy_InspectBasis");
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //新增时判断
                    if (oItem.HItemID == 0)
                    {
                        if (ds == null || ds.Tables[0].Rows.Count == 0)
                        {

                        }
                        else
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "保存失败！代码重复！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    else//编辑时判断
                    {
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), oItem.HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    //得到短代码
                    string sShortNumber;
                    sShortNumber = DBUtility.ClsPub.GetShortNumber(oItem.HNumber.Trim());
                    if (sShortNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！短代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oItem.HShortNumber = sShortNumber;//短代码
                    oItem.HEndFlag = true;//末级标志
                    oItem.HLevel = DBUtility.ClsPub.GetLevel(oItem.HNumber.Trim()); //等级
                    oItem.HMakeEmp = msg2; //创建人

                    oBill.oModel = oItem;
                }

                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.oModel.HItemID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddNew();
                }
                else
                {
                    bResult = oBill.ModifyByID(oBill.oModel.HItemID);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }

        /// <summary>
        /// æ£€éªŒä¾æ®å–信息
        /// </summary>
        /// <returns></returns>
        [Route("GetGy_InspectBasisDetail")]
        [HttpGet]
        public ApiResult<DataSet> GetGy_InspectBasisDetail(string HID)
        {
            var model = LuBaoSevice.GetGy_InspectBasisBillDetail(HID);
            return model;
        }

        /// <summary>
        /// æ£€éªŒä¾æ®åˆ é™¤åŠŸèƒ½
        /// </summary>
        /// <returns></returns>
        [Route("DeltetGy_InspectBasis")]
        [HttpGet]
        public object DeltetGy_InspectBasis(string HItemID, string user)
        {
            DataSet ds;
            //string ModRightNameCheck = "Sc_ProcessReport_check";
            try
            {
                //删除权限
                if (!DBUtility.ClsPub.Security_Log("Gy_InspectBasis_Drop", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (string.IsNullOrWhiteSpace(HItemID))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HItemID为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oCN.BeginTran();//开始事务
                ds = oCN.RunProcReturn("select * from Gy_InspectBasis where HItemID=" + HItemID, "Gy_InspectBasis");
                if (ds == null || ds.Tables[0].Rows.Count == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有数据，无法删除！";
                    objJsonResult.data = null;
                    return objJsonResult; ;
                }
                //var HStopflag = Convert.ToBoolean(ds.Tables[0].Rows[0]["HStopflag"]);
                //if (HStopflag)
                //{
                //    oCN.RollBack();//回滚事务
                //    objJsonResult.code = "0";
                //    objJsonResult.count = 0;
                //    objJsonResult.Message = "数据已删除无法再次删除！";
                //    objJsonResult.data = null;
                //    return objJsonResult;
                //}

                oCN.RunProc("delete Gy_InspectBasis where HItemID=" + HItemID);
                oCN.Commit();//提交事务
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "数据删除成功！";
                objJsonResult.data = null;
                return objJsonResult; ;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "删除失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        /// <summary>
        /// æŠ¥åºŸåŽŸå› 
        /// </summary>

 WebAPI/Controllers/Éú²ú¹ÜÀí/Éú²úÈÎÎñµ¥/Sc_ICMOBillController.cs

@@ -2039,5 +2039,53 @@
        }
        #endregion

        #region ä¸ºè¿›è¡ŒæŽ’产的生产订单 åˆ—表
        [Route("Sc_ICMOBill/NotInDayPlan")]
        [HttpGet]
        public object Sc_ICMOBillList_NotInDayPlan(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();

                ds = oCN.RunProcReturn("select * from  h_v_Sc_ICMOList_NotInDayPlan where 1 = 1" + sWhere , "h_v_Sc_ICMOList_NotInDayPlan");

                if (ds == null && ds.Tables[0].Rows.Count == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "Sucess！没有查询到相关数据";
                    objJsonResult.data = ds.Tables[0];
                    return objJsonResult;
                }
                else
                {
                    //添加列名
                    foreach (DataColumn col in ds.Tables[0].Columns)
                    {
                        Type dataType = col.DataType;
                        string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                        columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                    }

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "Sucess！";
                    objJsonResult.data = ds.Tables[0];
                    objJsonResult.list = columnNameList;
                    return objJsonResult;
                }               
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

    }
}

 WebAPI/DLL/ClsGy_BadResult_Ctl.cs

@@ -20,9 +20,9 @@
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HISsystemSet,HCREATEORGID) " +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HISsystemSet,HCREATEORGID,HERPItemID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + Convert.ToString(oModel.HISsystemSet ? 1 : 0) + "','" + oModel.HUSEORGID + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + Convert.ToString(oModel.HISsystemSet ? 1 : 0) + "','" + oModel.HUSEORGID + "','" + 0 + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();

 WebAPI/DLL/ClsGy_InspectBasis_Ctl.cs

New file
@@ -0,0 +1,101 @@
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;

namespace WebAPI.DLL
{
    public class ClsGy_InspectBasis_Ctl : DBUtility.ClsGy_Base_Ctl   
    {
        SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
        //原代码 ç”¨äºŽ æ›¿æ¢å­é¡¹ç›®
        public string HOldNumber;
        public Model.ClsGy_InspectBasis_Model oModel = new Model.ClsGy_InspectBasis_Model();
        //新增
        public override bool AddNew()
        {
            //
            try
            {
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID,HERPItemID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "','" + 0 + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }

        //修改
        public override bool ModifyByID(Int64 sItemID)
        {
            try
            {
                
                oCn.BeginTran();
                oCn.RunProc("Update " + MvarItemKey + " set " +
                    " HNumber='" + oModel.HNumber + "'" +
                    ",HName='" + oModel.HName + "'" +
                    ",HShortNumber='" + oModel.HShortNumber + "'" +
                    ",HHelpCode='" + oModel.HHelpCode + "'" +
                    ",HModifyTime='" + DateTime.Now + "'" +   
                    ",HUSEORGID='" + oModel.HUSEORGID + "'" +
                    ",HModifyEmp ='" + oModel.HMakeEmp + "'" +
                    ",HUseFlag='" + oModel.HUseFlag + "'" +
                    ",HStopflag=" + Convert.ToString(oModel.HStopflag ? 1 : 0) +
                    ",HRemark= '" + oModel.HRemark + "' Where HItemID=" + sItemID, ref DBUtility.ClsPub.sExeReturnInfo);
                //修改子项目代码
                oCn.RunProc("exec h_p_Gy_UpdateNumber '" + MvarItemKey + "','" + oModel.HNumber + ".','" + this.HOldNumber + ".'", ref DBUtility.ClsPub.sExeReturnInfo);
                //将上级 ä¸ºéžæœ«çº§
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                //
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }
        //根据代码判断信息
        public override bool HavParentCode(string sCode, Int64 sItemID)
        {
            DataSet DS;
            try
            {
                DS = oCn.RunProcReturn("Select * from " + MvarItemKey + " Where HStopflag=0 and HNumber='" + sCode + "' and HItemID<>" + sItemID, MvarItemKey, ref Pub_Class.ClsPub.sExeReturnInfo);
                if (DS.Tables[0].Rows.Count == 0)
                    return false;
                else
                {
                    oModel.HItemID = Convert.ToInt64(DS.Tables[0].Rows[0]["HItemID"]);
                    return true;
                }
            }
            catch (Exception e)
            {
                throw (e);
            }
        }
        //构造函数
        public ClsGy_InspectBasis_Ctl()
        {
            MvarItemKey = "Gy_InspectBasis";
            MvarReportTitle = "检验依据设置";
            oModel = new Model.ClsGy_InspectBasis_Model();
        }

    

    }
}

 WebAPI/DLL/ClsGy_InspectInstruMent_Ctl.cs

New file
@@ -0,0 +1,101 @@
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;

namespace WebAPI.DLL
{
    public class ClsGy_InspectInstruMent_Ctl : DBUtility.ClsGy_Base_Ctl   
    {
        SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
        //原代码 ç”¨äºŽ æ›¿æ¢å­é¡¹ç›®
        public string HOldNumber;
        public Model.ClsGy_InspectInstruMent_Model oModel = new Model.ClsGy_InspectInstruMent_Model();
        //新增
        public override bool AddNew()
        {
            //
            try
            {
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID,HERPItemID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "','" + 0 + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }

        //修改
        public override bool ModifyByID(Int64 sItemID)
        {
            try
            {
                
                oCn.BeginTran();
                oCn.RunProc("Update " + MvarItemKey + " set " +
                    " HNumber='" + oModel.HNumber + "'" +
                    ",HName='" + oModel.HName + "'" +
                    ",HShortNumber='" + oModel.HShortNumber + "'" +
                    ",HHelpCode='" + oModel.HHelpCode + "'" +
                    ",HModifyTime='" + DateTime.Now + "'" +   
                    ",HUSEORGID='" + oModel.HUSEORGID + "'" +
                    ",HModifyEmp ='" + oModel.HMakeEmp + "'" +
                    ",HUseFlag='" + oModel.HUseFlag + "'" +
                    ",HStopflag=" + Convert.ToString(oModel.HStopflag ? 1 : 0) +
                    ",HRemark= '" + oModel.HRemark + "' Where HItemID=" + sItemID, ref DBUtility.ClsPub.sExeReturnInfo);
                //修改子项目代码
                oCn.RunProc("exec h_p_Gy_UpdateNumber '" + MvarItemKey + "','" + oModel.HNumber + ".','" + this.HOldNumber + ".'", ref DBUtility.ClsPub.sExeReturnInfo);
                //将上级 ä¸ºéžæœ«çº§
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                //
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }
        //根据代码判断信息
        public override bool HavParentCode(string sCode, Int64 sItemID)
        {
            DataSet DS;
            try
            {
                DS = oCn.RunProcReturn("Select * from " + MvarItemKey + " Where HStopflag=0 and HNumber='" + sCode + "' and HItemID<>" + sItemID, MvarItemKey, ref Pub_Class.ClsPub.sExeReturnInfo);
                if (DS.Tables[0].Rows.Count == 0)
                    return false;
                else
                {
                    oModel.HItemID = Convert.ToInt64(DS.Tables[0].Rows[0]["HItemID"]);
                    return true;
                }
            }
            catch (Exception e)
            {
                throw (e);
            }
        }
        //构造函数
        public ClsGy_InspectInstruMent_Ctl()
        {
            MvarItemKey = "Gy_InspectInstruMent";
            MvarReportTitle = "检验仪器设置";
            oModel = new Model.ClsGy_InspectInstruMent_Model();
        }

    

    }
}

 WebAPI/DLL/ClsGy_InspectMethod_Ctl.cs

New file
@@ -0,0 +1,101 @@
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;

namespace WebAPI.DLL
{
    public class ClsGy_InspectMethod_Ctl : DBUtility.ClsGy_Base_Ctl   
    {
        SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
        //原代码 ç”¨äºŽ æ›¿æ¢å­é¡¹ç›®
        public string HOldNumber;
        public Model.ClsGy_InspectMethod_Model oModel = new Model.ClsGy_InspectMethod_Model();
        //新增
        public override bool AddNew()
        {
            //
            try
            {
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID,HERPItemID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "','" + 0 + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }

        //修改
        public override bool ModifyByID(Int64 sItemID)
        {
            try
            {
                
                oCn.BeginTran();
                oCn.RunProc("Update " + MvarItemKey + " set " +
                    " HNumber='" + oModel.HNumber + "'" +
                    ",HName='" + oModel.HName + "'" +
                    ",HShortNumber='" + oModel.HShortNumber + "'" +
                    ",HHelpCode='" + oModel.HHelpCode + "'" +
                    ",HModifyTime='" + DateTime.Now + "'" +   
                    ",HUSEORGID='" + oModel.HUSEORGID + "'" +
                    ",HModifyEmp ='" + oModel.HMakeEmp + "'" +
                    ",HUseFlag='" + oModel.HUseFlag + "'" +
                    ",HStopflag=" + Convert.ToString(oModel.HStopflag ? 1 : 0) +
                    ",HRemark= '" + oModel.HRemark + "' Where HItemID=" + sItemID, ref DBUtility.ClsPub.sExeReturnInfo);
                //修改子项目代码
                oCn.RunProc("exec h_p_Gy_UpdateNumber '" + MvarItemKey + "','" + oModel.HNumber + ".','" + this.HOldNumber + ".'", ref DBUtility.ClsPub.sExeReturnInfo);
                //将上级 ä¸ºéžæœ«çº§
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                //
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }
        //根据代码判断信息
        public override bool HavParentCode(string sCode, Int64 sItemID)
        {
            DataSet DS;
            try
            {
                DS = oCn.RunProcReturn("Select * from " + MvarItemKey + " Where HStopflag=0 and HNumber='" + sCode + "' and HItemID<>" + sItemID, MvarItemKey, ref Pub_Class.ClsPub.sExeReturnInfo);
                if (DS.Tables[0].Rows.Count == 0)
                    return false;
                else
                {
                    oModel.HItemID = Convert.ToInt64(DS.Tables[0].Rows[0]["HItemID"]);
                    return true;
                }
            }
            catch (Exception e)
            {
                throw (e);
            }
        }
        //构造函数
        public ClsGy_InspectMethod_Ctl()
        {
            MvarItemKey = "Gy_InspectMethod";
            MvarReportTitle = "检测方法设置";
            oModel = new Model.ClsGy_InspectMethod_Model();
        }

    

    }
}

 WebAPI/DLL/ClsGy_InspectValue_Ctl.cs

@@ -20,9 +20,9 @@
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID) " +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID,HERPItemID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "','" + 0 + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();

 WebAPI/DLL/ClsGy_QualityStd_Ctl.cs

New file
@@ -0,0 +1,101 @@
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;

namespace WebAPI.DLL
{
    public class ClsGy_QualityStd_Ctl : DBUtility.ClsGy_Base_Ctl   
    {
        SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
        //原代码 ç”¨äºŽ æ›¿æ¢å­é¡¹ç›®
        public string HOldNumber;
        public Model.ClsGy_QualityStd_Model oModel = new Model.ClsGy_QualityStd_Model();
        //新增
        public override bool AddNew()
        {
            //
            try
            {
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID,HERPItemID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "','" + 0 + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }

        //修改
        public override bool ModifyByID(Int64 sItemID)
        {
            try
            {
                
                oCn.BeginTran();
                oCn.RunProc("Update " + MvarItemKey + " set " +
                    " HNumber='" + oModel.HNumber + "'" +
                    ",HName='" + oModel.HName + "'" +
                    ",HShortNumber='" + oModel.HShortNumber + "'" +
                    ",HHelpCode='" + oModel.HHelpCode + "'" +
                    ",HModifyTime='" + DateTime.Now + "'" +   
                    ",HUSEORGID='" + oModel.HUSEORGID + "'" +
                    ",HModifyEmp ='" + oModel.HMakeEmp + "'" +
                    ",HUseFlag='" + oModel.HUseFlag + "'" +
                    ",HStopflag=" + Convert.ToString(oModel.HStopflag ? 1 : 0) +
                    ",HRemark= '" + oModel.HRemark + "' Where HItemID=" + sItemID, ref DBUtility.ClsPub.sExeReturnInfo);
                //修改子项目代码
                oCn.RunProc("exec h_p_Gy_UpdateNumber '" + MvarItemKey + "','" + oModel.HNumber + ".','" + this.HOldNumber + ".'", ref DBUtility.ClsPub.sExeReturnInfo);
                //将上级 ä¸ºéžæœ«çº§
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                //
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }
        //根据代码判断信息
        public override bool HavParentCode(string sCode, Int64 sItemID)
        {
            DataSet DS;
            try
            {
                DS = oCn.RunProcReturn("Select * from " + MvarItemKey + " Where HStopflag=0 and HNumber='" + sCode + "' and HItemID<>" + sItemID, MvarItemKey, ref Pub_Class.ClsPub.sExeReturnInfo);
                if (DS.Tables[0].Rows.Count == 0)
                    return false;
                else
                {
                    oModel.HItemID = Convert.ToInt64(DS.Tables[0].Rows[0]["HItemID"]);
                    return true;
                }
            }
            catch (Exception e)
            {
                throw (e);
            }
        }
        //构造函数
        public ClsGy_QualityStd_Ctl()
        {
            MvarItemKey = "Gy_QualityStd";
            MvarReportTitle = "质量标准设置";
            oModel = new Model.ClsGy_QualityStd_Model();
        }

    

    }
}

 WebAPI/DLL/ClsSc_ICMOReportBill.cs

@@ -202,13 +202,19 @@
                      ") ");

                    //反写产量汇报单临时表关联字段信息
                    string sql = string.Format(@"update Sc_ICMOBillWorkQtyStatus_Tmp  set 
                                                                    HICMOReportInterID ='" + omodel.HInterID +
                                                                   "', HICMOReportBillNo='" + omodel.HBillNo +
                    string sql = string.Format(@"update Sc_ICMOBillWorkQtyStatus_Tmp  set " +
                                                                   " HICMOReportBillNo ='" + omodel.HBillNo +
                                                                   "', HRelationInterID='" + omodel.HInterID +
                                                                   "', HRelationEntryID='" + oSub.HEntryID +
                                                                   "' from Sc_ICMOBillWorkQtyStatus_Tmp a where a.HICMOBillNo='" + DetailColl[0].HICMOBillNo + "' and a.HSourceID='" + DetailColl[0].HSourceID + "' and  HICMOInterID='" + DetailColl[0].HICMOInterID + "' and a.HICMOEntryID='" + DetailColl[0].HICMOEntryID + "'  and HRelationInterID='0'");
                    oCn.RunProc(sql);

                    //反写质量汇报单临时表关联字段信息
                    string sql2 = string.Format(@"update Sc_ICMOBillQualityStatus_Tmp  set " +
                                                                   " HRelationBillNo ='" + omodel.HBillNo +
                                                                   "', HRelationInterID='" + omodel.HInterID +
                                                                   "' from Sc_ICMOBillQualityStatus_Tmp a where a.HICMOBillNo='" + DetailColl[0].HICMOBillNo + "' and a.HSourceID='" + DetailColl[0].HSourceID + "' and  HICMOInterID='" + DetailColl[0].HICMOInterID + "' and a.HICMOEntryID='" + DetailColl[0].HICMOEntryID + "'  and HRelationInterID='0'");
                    oCn.RunProc(sql2);
                }
                //
                //foreach (Model.ClsSc_ICMOReportBillSub oSub in DetailColl)
@@ -399,7 +405,6 @@
                        FentityModel.Add("FMoEntryId", item["FMoEntryId"].ToString());//生产订单分录号
                        FentityModel.Add("FBaseUnitID", new JObject() { ["FNumber"] = item["FBaseUnitID"].ToString() });//单位
                        FentityModel.Add("FSTOCKINORGID", new JObject() { ["FNumber"] = item["FSTOCKINORGID"].ToString() });//入库组织
                        FentityModel.Add("FBOMID", new JObject() { ["FNumber"] = item["FBOMID"].ToString() });// BOM版本
                        FentityModel.Add("FOwnerTypeId", item["FOwnerTypeId"].ToString());// è´§ä¸»ç±»åž‹
                        FentityModel.Add("FOwnerId", new JObject() { ["FNumber"] = item["FOwnerId"].ToString() });// è´§ä¸»
                        FentityModel.Add("FSTOCKID", new JObject() { ["FNumber"] = item["FSTOCKID"].ToString() });//仓库
@@ -420,6 +425,7 @@
                        FentityModel.Add("FBASEFINISHQTY", item["FBASEFINISHQTY"].ToString());//基本单位完成数量
                        FentityModel.Add("FFINISHQTY", item["FFINISHQTY"].ToString());//完成数量
                        FentityModel.Add("FLot", new JObject() { ["FNumber"] = item["FLot"].ToString() });//批号
                        FentityModel.Add("FBOMID", new JObject() { ["FNumber"] = item["FBOMID"].ToString() });// BOM版本
                        
                        //sJson_BatchNo +
                        //sJson_StockPlace +

 WebAPI/ListModels.cs

@@ -742,6 +742,54 @@
        }

        /// <summary>
        /// å¤„理新增检测方法表的json
        /// </summary>
        /// <param name="jsonString"></param>
        /// <returns></returns>
        public List<Model.ClsGy_InspectMethod_Model> getObjectByJson_Gy_InspectMethod(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_InspectMethod_Model> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_InspectMethod_Model>>(jsonString);
            return list;
        }

        /// <summary>
        /// å¤„理新增质量标准表的json   
        /// </summary>
        /// <param name="jsonString"></param>
        /// <returns></returns>
        public List<Model.ClsGy_QualityStd_Model> getObjectByJson_Gy_QualityStd(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_QualityStd_Model> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_QualityStd_Model>>(jsonString);
            return list;
        }

        /// <summary>
        /// å¤„理新增检测仪器表的json   
        /// </summary>
        /// <param name="jsonString"></param> 
        /// <returns></returns>
        public List<Model.ClsGy_InspectInstruMent_Model> getObjectByJson_Gy_InspectInstruMent(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_InspectInstruMent_Model> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_InspectInstruMent_Model>>(jsonString);
            return list;
        }

        /// <summary>
        /// å¤„理新增检验依据表的json   
        /// </summary>
        /// <param name="jsonString"></param> 
        /// <returns></returns>
        public List<Model.ClsGy_InspectBasis_Model> getObjectByJson_Gy_InspectBasis(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_InspectBasis_Model> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_InspectBasis_Model>>(jsonString);
            return list;
        }

        /// <summary>
        /// å¤„理新增不良类型表的json
        /// </summary>
        /// <param name="jsonString"></param>

 WebAPI/Service/LuBaoSevice.cs

@@ -236,6 +236,82 @@
        }

        /// <summary>
        /// æ£€éªŒæ–¹æ³•æ ¹æ®id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_InspectMethodBillDetail(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            var dataSet = GetGy_InspectMethodDb(HID);
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在检测方法数据" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        public static DataSet GetGy_InspectMethodDb(string HID)
        {
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Gy_InspectMethod  where HItemID= " + HID + " ", "h_v_Gy_InspectMethod");
            return dataSet;
        }

        /// <summary>
        /// è´¨é‡æ ‡å‡†æ ¹æ®id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_QualityStdBillDetail(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            var dataSet = GetGy_QualityStdDb(HID);
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在质量标准数据" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        public static DataSet GetGy_QualityStdDb(string HID)
        {
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Gy_QualityStd  where HItemID= " + HID + " ", "h_v_Gy_QualityStd");
            return dataSet;
        }

        /// <summary>
        /// æ£€éªŒä»ªå™¨æ ¹æ®id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_InspectInstruMentBillDetail(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            var dataSet = GetGy_InspectInstruMentDb(HID);
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在检验仪器数据" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        public static DataSet GetGy_InspectInstruMentDb(string HID)
        {
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Gy_InspectInstruMent  where HItemID= " + HID + " ", "h_v_Gy_InspectInstruMent");
            return dataSet;
        }

        /// <summary>
        /// æ£€éªŒä¾æ®æ ¹æ®id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_InspectBasisBillDetail(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            var dataSet = GetGy_InspectBasisDb(HID);
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在检验依据数据" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        public static DataSet GetGy_InspectBasisDb(string HID)
        {
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Gy_InspectBasis  where HItemID= " + HID + " ", "h_v_Gy_InspectBasis");
            return dataSet;
        }

        /// <summary>
        /// è®¡é‡å•ä½æ ¹æ®id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_UnitBillDetail(string HID)

 WebAPI/WebAPI.csproj

@@ -617,6 +617,10 @@
    <Compile Include="Dapper\SqlHelper.cs" />
    <Compile Include="Dapper\SqlPools.cs" />
    <Compile Include="DbUntil\DataFormatUntil.cs" />
    <Compile Include="DLL\ClsGy_InspectInstruMent_Ctl.cs" />
    <Compile Include="DLL\ClsGy_InspectBasis_Ctl.cs" />
    <Compile Include="DLL\ClsGy_QualityStd_Ctl.cs" />
    <Compile Include="DLL\ClsGy_InspectMethod_Ctl.cs" />
    <Compile Include="DLL\ClsGy_InspectValue_Ctl.cs" />
    <Compile Include="DLL\ClsGy_BadResult_Ctl.cs" />
    <Compile Include="DLL\ClsGy_BadReason_Ctl.cs" />