nothing

YL

2021-07-12 9273075e520151fdebd2ba7ab9401cd51f28c464

nothing

 WebAPI/Controllers/CJGL/Cj_StationOutBillController.cs

@@ -499,7 +499,7 @@
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "上传失败！";
                objJsonResult.Message = dyResult.returnval;
                objJsonResult.data = null;
                return objJsonResult;
            }

 WebAPI/Controllers/Sc_MouldController.cs

@@ -165,6 +165,457 @@

        #endregion

        #region 模具生产领用单

        #region 模具生产领用单保存

        [Route("Sc_MouldProdOutBill/MouldProdOutBill_Save")]
        [HttpPost]
        public object MouldProdOutAdd([FromBody] JObject sMainSub)
        {
            var _value = sMainSub["sMainSub"].ToString();
            string msg1 = _value.ToString();
            //保存单据
            return objJsonResult = MouldProdOutAddBill(msg1);
        }

        public json MouldProdOutAddBill(string msg1)
        {
            //string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            //string msg2 = sArray[0].ToString();
            //string msg3 = sArray[0].ToString();
            bool bResult;
            try
            {
                //msg2 = "[" + msg2.ToString() + "]";
                msg1 = "[" + msg1.ToString() + "]";
                DAL.ClsSc_MouldProdOutBill BillNew = new DAL.ClsSc_MouldProdOutBill();
                List<Model.ClsSc_MouldProdOutBillMain> mainList = Newtonsoft
                    .Json
                    .JsonConvert
                    .DeserializeObject<List<Model.ClsSc_MouldProdOutBillMain>>(msg1);
                List<Model.ClsSc_MouldStockBillSub> subList = Newtonsoft
                    .Json
                    .JsonConvert
                    .DeserializeObject<List<Model.ClsSc_MouldStockBillSub>>(msg1);
                //判断会计期是否合理
                string s = "";
                int sYear = 0;
                int sPeriod = 0;
                DateTime HDate = mainList[0].HDate;//日期
                if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = s;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                BillNew.omodel.HYear = sYear;
                BillNew.omodel.HPeriod = sPeriod;
                BillNew.omodel.HBillNo = mainList[0].HBillNo.Trim();
                BillNew.omodel.HMaker = mainList[0].HMaker;
                BillNew.omodel.HDate = HDate;
                BillNew.omodel.HWHID = mainList[0].HWHID;
                BillNew.omodel.HSupID = 0;
                BillNew.omodel.HSCWHID = 0;
                BillNew.omodel.HEmpID = 0;
                BillNew.omodel.HManagerID = 0;
                BillNew.omodel.HSecManagerID = mainList[0].HSecManagerID;
                BillNew.omodel.HKeeperID = mainList[0].HKeeperID;
                BillNew.omodel.HDeptID = mainList[0].HDeptID;
                BillNew.omodel.HExplanation = mainList[0].HExplanation;
                BillNew.omodel.HInnerBillNo = mainList[0].HInnerBillNo;
                BillNew.omodel.HRedBlueFlag = mainList[0].HRedBlueFlag;
                BillNew.DetailColl = new List<Model.ClsSc_MouldStockBillSub>();
                Model.ClsSc_MouldStockBillSub oSub = new Model.ClsSc_MouldStockBillSub();

                oSub.HEntryID = 1;
                oSub.HRemark = DBUtility.ClsPub.isStrNull(subList[0].HRemark);
                oSub.HSourceInterID = DBUtility.ClsPub.isLong(subList[0].HSourceInterID);
                oSub.HSourceEntryID = DBUtility.ClsPub.isLong(subList[0].HSourceEntryID);
                oSub.HSourceBillType = DBUtility.ClsPub.isStrNull(subList[0].HSourceBillType);
                oSub.HSourceBillNo = DBUtility.ClsPub.isStrNull(subList[0].HSourceBillNo);
                oSub.HRelationQty = DBUtility.ClsPub.isDoule(subList[0].HRelationQty);
                oSub.HRelationMoney = DBUtility.ClsPub.isDoule(subList[0].HRelationMoney);
                oSub.HCloseMan = DBUtility.ClsPub.isStrNull(subList[0].HCloseMan);
                oSub.HEntryCloseDate = DBUtility.ClsPub.isDate(subList[0].HEntryCloseDate);
                oSub.HCloseType = DBUtility.ClsPub.isBool(subList[0].HCloseType);
                oSub.HMaterID = DBUtility.ClsPub.isLong(subList[0].HMaterID);
                oSub.HPropertyID = DBUtility.ClsPub.isLong(subList[0].HPropertyID);
                oSub.HSecUnitID = DBUtility.ClsPub.isLong(subList[0].HSecUnitID);
                oSub.HSecUnitRate = DBUtility.ClsPub.isSingle(subList[0].HSecUnitRate);
                oSub.HUnitID = DBUtility.ClsPub.isLong(subList[0].HUnitID);
                oSub.HQtyMust = DBUtility.ClsPub.isDoule(subList[0].HQtyMust);
                oSub.HQty = DBUtility.ClsPub.isDoule(subList[0].HQty);
                oSub.HBarCode = DBUtility.ClsPub.isStrNull(subList[0].HBarCode);
                if (oSub.HQty <= 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "流转卡数量不能为0或者小于0";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oSub.HDesignLife = DBUtility.ClsPub.isLong(subList[0].HDesignLife);
                if (oSub.HDesignLife < 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "设计寿命不能为0或者小于0";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oSub.HLeaveLife = DBUtility.ClsPub.isLong(subList[0].HLeaveLife);
                oSub.HPrice = DBUtility.ClsPub.isDoule(subList[0].HPrice);
                oSub.HWHID = DBUtility.ClsPub.isLong(subList[0].HWHID);
                oSub.HSPID = DBUtility.ClsPub.isLong(subList[0].HSPID);
                oSub.HSCWHID = 0;
                oSub.HSCSPID = 0;
                oSub.HSPGroupID = DBUtility.ClsPub.isLong(subList[0].HSPGroupID);
                oSub.HBatchNo = DBUtility.ClsPub.isStrNull(subList[0].HBatchNo);
                oSub.HNewModel = DBUtility.ClsPub.isStrNull(subList[0].HNewModel);
                oSub.HWallThickness = DBUtility.ClsPub.isStrNull(subList[0].HWallThickness);
                oSub.HHardness = DBUtility.ClsPub.isStrNull(subList[0].HHardness);
                oSub.HLastProdModel = DBUtility.ClsPub.isStrNull(subList[0].HLastProdModel);
                oSub.HDiameter = DBUtility.ClsPub.isStrNull(subList[0].HDiameter);
                oSub.HBackFlag = DBUtility.ClsPub.isStrNull(subList[0].HBackFlag);
                BillNew.DetailColl.Add(oSub);
                bResult = BillNew.AddBill(ref ClsPub.sExeReturnInfo);
                //提示
                if (bResult == true)
                {
                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = ClsPub.sExeReturnInfo + "单据号:" + mainList[0].HBillNo.Trim();
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败!原因:" + ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        #endregion

        #endregion





        #region 模具生产退库单

        #region 模具生产退库单保存

        [Route("Sc_MouldProdBackBill/MouldProdBackBill_Save")]
        [HttpPost]
        public object MoulddProdBackAdd([FromBody] JObject sMainSub)
        {
            var _value = sMainSub["sMainSub"].ToString();
            string msg1 = _value.ToString();
            //保存单据
            return objJsonResult = MoulddProdBackAddBill(msg1);
        }

        public json MoulddProdBackAddBill(string msg1)
        {
            bool bResult;
            try
            {
                msg1 = "[" + msg1.ToString() + "]";
                DAL.ClsSc_MouldProdBackBill BillNew = new DAL.ClsSc_MouldProdBackBill();
                List<Model.ClsSc_MouldProdBackBillMain> mainList = Newtonsoft
                    .Json
                    .JsonConvert
                    .DeserializeObject<List<Model.ClsSc_MouldProdBackBillMain>>(msg1);
                List<Model.ClsSc_MouldStockBillSub> subList = Newtonsoft
                    .Json
                    .JsonConvert
                    .DeserializeObject<List<Model.ClsSc_MouldStockBillSub>>(msg1);
                //判断会计期是否合理
                string s = "";
                int sYear = 0;
                int sPeriod = 0;
                DateTime HDate = mainList[0].HDate;//日期
                if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = s;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                BillNew.omodel.HYear = sYear;
                BillNew.omodel.HPeriod = sPeriod;
                BillNew.omodel.HBillNo = mainList[0].HBillNo.Trim();
                BillNew.omodel.HMaker = mainList[0].HMaker;
                BillNew.omodel.HDate = HDate;
                BillNew.omodel.HWHID = mainList[0].HWHID;
                BillNew.omodel.HSupID = 0;
                BillNew.omodel.HSCWHID = 0;
                BillNew.omodel.HEmpID = 0;
                BillNew.omodel.HManagerID = 0;
                BillNew.omodel.HSecManagerID = mainList[0].HSecManagerID;
                BillNew.omodel.HKeeperID = mainList[0].HKeeperID;
                BillNew.omodel.HDeptID = mainList[0].HDeptID;
                BillNew.omodel.HExplanation = mainList[0].HExplanation;
                BillNew.omodel.HInnerBillNo = mainList[0].HInnerBillNo;
                BillNew.omodel.HRedBlueFlag = mainList[0].HRedBlueFlag;
                BillNew.DetailColl = new List<Model.ClsSc_MouldStockBillSub>();
                Model.ClsSc_MouldStockBillSub oSub = new Model.ClsSc_MouldStockBillSub();

                oSub.HEntryID = 1;
                oSub.HRemark = DBUtility.ClsPub.isStrNull(subList[0].HRemark);
                oSub.HSourceInterID = DBUtility.ClsPub.isLong(subList[0].HSourceInterID);
                oSub.HSourceEntryID = DBUtility.ClsPub.isLong(subList[0].HSourceEntryID);
                oSub.HSourceBillType = DBUtility.ClsPub.isStrNull(subList[0].HSourceBillType);
                oSub.HSourceBillNo = DBUtility.ClsPub.isStrNull(subList[0].HSourceBillNo);
                oSub.HRelationQty = DBUtility.ClsPub.isDoule(subList[0].HRelationQty);
                oSub.HRelationMoney = DBUtility.ClsPub.isDoule(subList[0].HRelationMoney);
                oSub.HCloseMan = DBUtility.ClsPub.isStrNull(subList[0].HCloseMan);
                oSub.HEntryCloseDate = DBUtility.ClsPub.isDate(subList[0].HEntryCloseDate);
                oSub.HCloseType = DBUtility.ClsPub.isBool(subList[0].HCloseType);
                oSub.HMaterID = DBUtility.ClsPub.isLong(subList[0].HMaterID);
                oSub.HPropertyID = DBUtility.ClsPub.isLong(subList[0].HPropertyID);
                oSub.HSecUnitID = DBUtility.ClsPub.isLong(subList[0].HSecUnitID);
                oSub.HSecUnitRate = DBUtility.ClsPub.isSingle(subList[0].HSecUnitRate);
                oSub.HUnitID = DBUtility.ClsPub.isLong(subList[0].HUnitID);
                oSub.HQtyMust = DBUtility.ClsPub.isDoule(subList[0].HQtyMust);
                oSub.HQty = DBUtility.ClsPub.isDoule(subList[0].HQty);
                oSub.HBarCode = DBUtility.ClsPub.isStrNull(subList[0].HBarCode);
                if (oSub.HQty <= 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "流转卡数量不能为0或者小于0";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oSub.HDesignLife = DBUtility.ClsPub.isLong(subList[0].HDesignLife);
                if (oSub.HDesignLife < 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "设计寿命不能为0或者小于0";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oSub.HLeaveLife = DBUtility.ClsPub.isLong(subList[0].HLeaveLife);
                oSub.HPrice = DBUtility.ClsPub.isDoule(subList[0].HPrice);
                oSub.HWHID = DBUtility.ClsPub.isLong(subList[0].HWHID);
                oSub.HSPID = DBUtility.ClsPub.isLong(subList[0].HSPID);
                oSub.HSCWHID = 0;
                oSub.HSCSPID = 0;
                oSub.HSPGroupID = DBUtility.ClsPub.isLong(subList[0].HSPGroupID);
                oSub.HBatchNo = DBUtility.ClsPub.isStrNull(subList[0].HBatchNo);
                oSub.HNewModel = DBUtility.ClsPub.isStrNull(subList[0].HNewModel);
                oSub.HWallThickness = DBUtility.ClsPub.isStrNull(subList[0].HWallThickness);
                oSub.HHardness = DBUtility.ClsPub.isStrNull(subList[0].HHardness);
                oSub.HLastProdModel = DBUtility.ClsPub.isStrNull(subList[0].HLastProdModel);
                oSub.HDiameter = DBUtility.ClsPub.isStrNull(subList[0].HDiameter);
                oSub.HBackFlag = DBUtility.ClsPub.isStrNull(subList[0].HBackFlag);
                oSub.HDesignLife = DBUtility.ClsPub.isLong(subList[0].HDesignLife);
                oSub.HUseLife = DBUtility.ClsPub.isLong(subList[0].HUseLife);
                BillNew.DetailColl.Add(oSub);
                bResult = BillNew.AddBill(ref ClsPub.sExeReturnInfo);
                //提示
                if (bResult == true)
                {
                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = ClsPub.sExeReturnInfo + "单据号:" + mainList[0].HBillNo.Trim();
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败!原因:" + ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        #endregion

        #endregion



        #region 模具处理出库单

        #region 模具处理出库单保存

        [Route("Sc_MouldScrapOutBill/MouldScrapOutBill_Save")]
        [HttpPost]
        public object MouldScrapOutAdd([FromBody] JObject sMainSub)
        {
            var _value = sMainSub["sMainSub"].ToString();
            string msg1 = _value.ToString();
            //保存单据
            return objJsonResult = MouldScrapOutAddBill(msg1);
        }

        public json MouldScrapOutAddBill(string msg1)
        {
            bool bResult;
            try
            {
                msg1 = "[" + msg1.ToString() + "]";
                DAL.ClsSc_MouldScrapOutBill BillNew = new DAL.ClsSc_MouldScrapOutBill();
                List<Models.ClsSc_MouldScrapOutBillMain> mainList = Newtonsoft
                    .Json
                    .JsonConvert
                    .DeserializeObject<List<Models.ClsSc_MouldScrapOutBillMain>>(msg1);
                List<Models.ClsSc_MouldStockBillSub> subList = Newtonsoft
                    .Json
                    .JsonConvert
                    .DeserializeObject<List<Models.ClsSc_MouldStockBillSub>>(msg1);
                //判断会计期是否合理
                string s = "";
                int sYear = 0;
                int sPeriod = 0;
                DateTime HDate = mainList[0].HDate;//日期
                if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = s;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                BillNew.omodel.HYear = sYear;
                BillNew.omodel.HPeriod = sPeriod;
                BillNew.omodel.HBillNo = mainList[0].HBillNo.Trim();
                BillNew.omodel.HMaker = mainList[0].HMaker;
                BillNew.omodel.HDate = HDate;
                BillNew.omodel.HWHID = mainList[0].HWHID;
                BillNew.omodel.HSupID = 0;
                BillNew.omodel.HSCWHID = 0;
                BillNew.omodel.HEmpID = 0;
                BillNew.omodel.HManagerID = 0;
                BillNew.omodel.HSecManagerID = mainList[0].HSecManagerID;
                BillNew.omodel.HKeeperID = mainList[0].HKeeperID;
                BillNew.omodel.HDeptID = mainList[0].HDeptID;
                BillNew.omodel.HExplanation = mainList[0].HExplanation;
                BillNew.omodel.HInnerBillNo = mainList[0].HInnerBillNo;
                BillNew.omodel.HRedBlueFlag = mainList[0].HRedBlueFlag;
                BillNew.DetailColl = new List<Model.ClsSc_MouldStockBillSub>();
                Model.ClsSc_MouldStockBillSub oSub = new Model.ClsSc_MouldStockBillSub();

                oSub.HEntryID = 1;
                oSub.HRemark = DBUtility.ClsPub.isStrNull(subList[0].HRemark);
                oSub.HSourceInterID = DBUtility.ClsPub.isLong(subList[0].HSourceInterID);
                oSub.HSourceEntryID = DBUtility.ClsPub.isLong(subList[0].HSourceEntryID);
                oSub.HSourceBillType = DBUtility.ClsPub.isStrNull(subList[0].HSourceBillType);
                oSub.HSourceBillNo = DBUtility.ClsPub.isStrNull(subList[0].HSourceBillNo);
                oSub.HRelationQty = DBUtility.ClsPub.isDoule(subList[0].HRelationQty);
                oSub.HRelationMoney = DBUtility.ClsPub.isDoule(subList[0].HRelationMoney);
                oSub.HCloseMan = DBUtility.ClsPub.isStrNull(subList[0].HCloseMan);
                oSub.HEntryCloseDate = DBUtility.ClsPub.isDate(subList[0].HEntryCloseDate);
                oSub.HCloseType = DBUtility.ClsPub.isBool(subList[0].HCloseType);
                oSub.HMaterID = DBUtility.ClsPub.isLong(subList[0].HMaterID);
                oSub.HPropertyID = DBUtility.ClsPub.isLong(subList[0].HPropertyID);
                oSub.HSecUnitID = DBUtility.ClsPub.isLong(subList[0].HSecUnitID);
                oSub.HSecUnitRate = DBUtility.ClsPub.isSingle(subList[0].HSecUnitRate);
                oSub.HUnitID = DBUtility.ClsPub.isLong(subList[0].HUnitID);
                oSub.HQtyMust = DBUtility.ClsPub.isDoule(subList[0].HQtyMust);
                oSub.HQty = DBUtility.ClsPub.isDoule(subList[0].HQty);
                oSub.HBarCode = DBUtility.ClsPub.isStrNull(subList[0].HBarCode);
                if (oSub.HQty <= 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "流转卡数量不能为0或者小于0";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oSub.HDesignLife = DBUtility.ClsPub.isLong(subList[0].HDesignLife);
                if (oSub.HDesignLife < 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "设计寿命不能为0或者小于0";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oSub.HLeaveLife = DBUtility.ClsPub.isLong(subList[0].HLeaveLife);
                oSub.HPrice = DBUtility.ClsPub.isDoule(subList[0].HPrice);
                oSub.HWHID = DBUtility.ClsPub.isLong(subList[0].HWHID);
                oSub.HSPID = DBUtility.ClsPub.isLong(subList[0].HSPID);
                oSub.HSCWHID = 0;
                oSub.HSCSPID = 0;
                oSub.HSPGroupID = DBUtility.ClsPub.isLong(subList[0].HSPGroupID);
                oSub.HBatchNo = DBUtility.ClsPub.isStrNull(subList[0].HBatchNo);
                oSub.HNewModel = DBUtility.ClsPub.isStrNull(subList[0].HNewModel);
                oSub.HWallThickness = DBUtility.ClsPub.isStrNull(subList[0].HWallThickness);
                oSub.HHardness = DBUtility.ClsPub.isStrNull(subList[0].HHardness);
                oSub.HLastProdModel = DBUtility.ClsPub.isStrNull(subList[0].HLastProdModel);
                oSub.HDiameter = DBUtility.ClsPub.isStrNull(subList[0].HDiameter);
                oSub.HBackFlag = DBUtility.ClsPub.isStrNull(subList[0].HBackFlag);
                oSub.HDesignLife = DBUtility.ClsPub.isLong(subList[0].HDesignLife);
                oSub.HUseLife = DBUtility.ClsPub.isLong(subList[0].HUseLife);
                BillNew.DetailColl.Add(oSub);
                bResult = BillNew.AddBill(ref ClsPub.sExeReturnInfo);
                //提示
                if (bResult == true)
                {
                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = ClsPub.sExeReturnInfo + "单据号:" + mainList[0].HBillNo.Trim();
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败!原因:" + ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        #endregion

        #endregion



        #region 模具其他出库单

        #region 模具其他出库单保存

 WebAPI/Controllers/Sc_MouldOtherInBillController.cs

@@ -181,8 +181,8 @@
                    //
                    if (oMould.DeleteBill(HItemID, ref DBUtility.ClsPub.sExeReturnInfo))
                    {
                        //写入日志
                        //ClsPub.Add_Log("", "删除项目，代码：" + oMould.omodel.HNumber + ",名称：" + oMould.omodel.HName, ClsPub.CurUserName);
                        ////写入日志
                        //ClsPub.Add_Log("", "删除项目，代码：" + oMould.omodel.hn + ",名称：" + oMould.omodel.HName, ClsPub.CurUserName);
                        //更新上级为 末级
                        objJsonResult.code = "1";
                        objJsonResult.count = 1;

 WebAPI/Models/ClsSc_MouldScrapOutBillMain.cs

New file
@@ -0,0 +1,22 @@
using System;
using System.Collections.Generic;
using System.Text;

namespace WebAPI.Models
{
    public class ClsSc_MouldScrapOutBillMain: DBUtility.ClsXt_BaseBillMain
    {
        public long HMouldID;//     int    --产品模具
        public string HPlanNo;//     varchar(50)          --点检计划编号
        public long HPlanInterID;//    int        --点检计划内码
        public string HBeginDate;//    datetime      --点检开始日期
        public string HEndDate;//       datetime      --点检结束日期
        public string HExplanation;//   varchar(500)     --ժҪ 
        public string HInnerBillNo;//   varchar(50)     --内部单据号
        public long HDeptID;//     int    --部门ID
        public long HWHID;//       int  --仓库ID
        public long HSecManagerID;//    int  --
        public long HKeeperID;//    int  --
        public bool HRedBlueFlag;//    bool
    }
}

 WebAPI/Properties/PublishProfiles/FolderProfile.pubxml.user

@@ -9,7 +9,7 @@
  </PropertyGroup>
  <ItemGroup>
    <File Include="apiapp.json">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="bin/Antlr3.Runtime.dll">
      <publishTime>02/22/2013 08:43:40</publishTime>
@@ -18,19 +18,25 @@
      <publishTime>02/22/2013 08:43:40</publishTime>
    </File>
    <File Include="bin/BLL.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="bin/DAL.dll">
      <publishTime>07/02/2021 16:55:02</publishTime>
      <publishTime>07/02/2021 08:47:34</publishTime>
    </File>
    <File Include="bin/Dapper.dll">
      <publishTime>07/22/2016 14:52:40</publishTime>
    </File>
    <File Include="bin/DBUtility.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="bin/Kingdee.BOS.WebApi.Client.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="bin/Kingdee.BOS.WebApi.FormService.dll">
      <publishTime>09/20/2018 19:23:20</publishTime>
    </File>
    <File Include="bin/Kingdee.BOS.WebApi.ServicesStub.dll">
      <publishTime>09/20/2018 19:28:34</publishTime>
    </File>
    <File Include="bin/Microsoft.Azure.AppService.ApiApps.Service.dll">
      <publishTime>03/18/2015 17:02:50</publishTime>
@@ -42,19 +48,22 @@
      <publishTime>07/25/2012 11:48:56</publishTime>
    </File>
    <File Include="bin/Model.dll">
      <publishTime>06/28/2021 17:33:22</publishTime>
      <publishTime>07/02/2021 08:47:34</publishTime>
    </File>
    <File Include="bin/Models/ClsSc_MouldScrapOutBillMain.cs">
      <publishTime>07/05/2021 15:15:53</publishTime>
    </File>
    <File Include="bin/Newtonsoft.Json.dll">
      <publishTime>08/03/2014 20:33:56</publishTime>
    </File>
    <File Include="bin/Pub_Class.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="bin/Pub_Control.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="bin/SQLHelper.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="bin/Swashbuckle.Core.dll">
      <publishTime>02/15/2015 17:57:08</publishTime>
@@ -120,7 +129,7 @@
      <publishTime>11/28/2018 13:01:00</publishTime>
    </File>
    <File Include="bin/System.Web.Http.WebHost.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="bin/System.Web.Mvc.dll">
      <publishTime>01/28/2015 04:02:18</publishTime>
@@ -153,10 +162,10 @@
      <publishTime>11/24/2014 11:18:48</publishTime>
    </File>
    <File Include="bin/WebAPI.dll">
      <publishTime>07/12/2021 12:33:55</publishTime>
      <publishTime>07/12/2021 15:59:39</publishTime>
    </File>
    <File Include="bin/WebAPI.pdb">
      <publishTime>07/12/2021 12:33:55</publishTime>
      <publishTime>07/12/2021 15:59:39</publishTime>
    </File>
    <File Include="bin/WebGrease.dll">
      <publishTime>07/17/2013 17:03:52</publishTime>
@@ -168,163 +177,163 @@
      <publishTime>11/29/2018 13:26:30</publishTime>
    </File>
    <File Include="Content/bootstrap.css">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Content/bootstrap.min.css">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Content/Site.css">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="DLL/BLL.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="DLL/DAL.dll">
      <publishTime>07/02/2021 16:55:02</publishTime>
      <publishTime>07/02/2021 08:47:34</publishTime>
    </File>
    <File Include="DLL/DBUtility.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="DLL/Kingdee.BOS.WebApi.Client.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="DLL/Model.dll">
      <publishTime>06/28/2021 17:33:22</publishTime>
      <publishTime>07/02/2021 08:47:34</publishTime>
    </File>
    <File Include="DLL/Newtonsoft.Json.Net35.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="DLL/Pub_Class.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="DLL/Pub_Control.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="DLL/SQLHelper.dll">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="fonts/glyphicons-halflings-regular.eot">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="fonts/glyphicons-halflings-regular.svg">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="fonts/glyphicons-halflings-regular.ttf">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="fonts/glyphicons-halflings-regular.woff">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Global.asax">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Index.html">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Metadata/deploymentTemplates/apiappconfig.azureresource.json">
      <publishTime>05/25/2021 14:18:15</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="packages.config">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Scripts/bootstrap.js">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Scripts/bootstrap.min.js">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Scripts/jquery-1.10.2.js">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Scripts/jquery-1.10.2.min.js">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Scripts/jquery-1.10.2.min.map">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Scripts/jquery.validate.js">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Scripts/jquery.validate.min.js">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Scripts/jquery.validate.unobtrusive.js">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Scripts/jquery.validate.unobtrusive.min.js">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Scripts/modernizr-2.6.2.js">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Shared/Error.cshtml">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/Shared/_Layout.cshtml">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/web.config">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Views/_ViewStart.cshtml">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsCLD_Customer_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsCLD_Department_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsCLD_Employee_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsCLD_StockPlace_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsCLD_Supplier_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsCLD_Warehouse_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_BadReason_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_BarCodeBill_WMS_Model_View.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_Customer_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_Department_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_Employee_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_Group_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_Item30JiTai_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_Source_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_StockPlace_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_Supplier_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsGy_Warehouse_Model.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web References/WebS/ClsKf_ICStockBill_WMS.datasource">
      <publishTime>05/25/2021 14:18:16</publishTime>
      <publishTime>05/10/2021 09:27:02</publishTime>
    </File>
    <File Include="Web.config">
      <publishTime>07/12/2021 12:33:59</publishTime>
      <publishTime>07/12/2021 16:00:31</publishTime>
    </File>
  </ItemGroup>
</Project>

 WebAPI/Web References/WebS/Reference.cs

@@ -857,7 +857,8 @@
        
        /// <remarks/>
        public WebService1() {
            this.Url = "http://124.70.129.242:9090/WEBS-WMS/WebService1.asmx";
            this.Url = "http://183.129.128.86:9090/WEBS-WMSTest/WebService1.asmx";
        
            if ((this.IsLocalFileSystemWebService(this.Url) == true)) {
                this.UseDefaultCredentials = true;
                this.useDefaultCredentialsSetExplicitly = false;

 WebAPI/Web.config

@@ -17,8 +17,8 @@
    
  <appSettings>
      <!--服务器文件IP地址-->
    <add key="FileIP" value="http://localhost:8082/LuBaoAPI"/>
    <!--<add key="FileIP" value="http://localhost:8085/"/>-->
    <!--<add key="FileIP" value="http://localhost:8082/LuBaoAPI"/>-->
    <add key="FileIP" value="http://localhost:8080/"/>
    <add key="webpages:Version" value="3.0.0.0" />
    <add key="webpages:Enabled" value="false" />
    <add key="ClientValidationEnabled" value="true" />

 WebAPI/WebAPI.csproj

@@ -423,6 +423,9 @@
    <Compile Include="Models\ClsSb_EquipMaintainBillSub.cs" />
    <Compile Include="Models\ClsSb_EquipRepairWorkBillMain.cs" />
    <Compile Include="Models\ClsSb_EquipRepairWorkBillSub.cs" />
    <Compile Include="Models\ClsSc_MouldScrapOutBillMain.cs">
      <CopyToOutputDirectory>Always</CopyToOutputDirectory>
    </Compile>
    <Compile Include="Models\ClsSc_MouldDotCheckBillMain.cs" />
    <Compile Include="Models\ClsSc_MouldDotCheckBillSub.cs" />
    <Compile Include="Models\ClsSc_MouldMaintainBillMain.cs" />