产线器具对应清单

yusijie

2025-02-12 4d1df5bededf90dfa91350e5258cee1e6b5ba010

产线器具对应清单

 DAL/DAL.csproj

@@ -95,6 +95,7 @@
    <Compile Include="源单\InterFace源单\Cls_S_IF_ICMOBillList_CusBarCodeBill.cs" />
    <Compile Include="源单\InterFace源单\Cls_S_IF_ICMOReportBillList_CusBarCodeBill.cs" />
    <Compile Include="系统公用\ClsXt_DefineBillMainSet.cs" />
    <Compile Include="计划管理\ClsGy_SourceMouldBillMain.cs" />
    <Compile Include="质检管理\ClsQC_EnvironmentTestDotCheckBillMain.cs" />
    <Compile Include="质检管理\ClsQC_MonthTarGetBill.cs" />
    <Compile Include="生产管理\设备管理\ClsSb_EquipRepairSignBill.cs" />

 DAL/¼Æ»®¹ÜÀí/ClsGy_SourceMouldBillMain.cs

New file
@@ -0,0 +1,271 @@
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;

namespace DAL
{
    public class ClsGy_SourceMouldBillMain : DBUtility.ClsXt_BaseBill
    {
        public Model.ClsGy_SourceMouldBillMain omodel = new Model.ClsGy_SourceMouldBillMain();
        public List<Model.ClsGy_SourceMouldBillSub> DetailColl = new List<Model.ClsGy_SourceMouldBillSub>();

        public ClsGy_SourceMouldBillMain()
        {
            base.MvarItemKeySub = "Gy_SourceMouldBillSub";
            base.MvarItemKeySub2 = "";
            base.MvarItemKeySub3 = "";
            base.MvarItemKeySub4 = "";
            base.MvarItemKey = "Gy_SourceMouldBillMain";
            base.MvarReportTitle = "产线器具清单";
            base.BillType = "4617";
            base.HBillSubType = "4617";

        }

        #region å›ºå®šä»£ç 
        #region æ— å‚构造函数
        ~ClsGy_SourceMouldBillMain()
        {
            DetailColl = null;
        }
        #endregion
        #endregion

        //#region ä¿®æ”¹å•æ®
        public override bool ModifyBill(Int64 lngBillKey, ref string sReturn)
        {
            try
            {
                oCn.BeginTran();
                //更新主表
                string mainSql = "update Gy_SourceMouldBillMain set " +
                    " HBillNo = '" + omodel.HBillNo +
                    "', HDate = '" + omodel.HDate +
                    "', HRemark = '" + omodel.HRemark +
                    "', HUpDater = '" + omodel.HUpDater +
                    "', HUpDateDate = getdate()" +
                     //===============================================================

                     ", HDeptID = '" + omodel.HDeptID +
                    "', HEmpID = '" + omodel.HEmpID +
                    "', HSourceID = '" + omodel.HSourceID +
                    "', HWorkCenterID = '" + omodel.HWorkCenterID +
                    "', HEquipID  = '" + omodel.HEquipID +
                    "', HOrgID      = '" + omodel.HOrgID +
                    "', HProcID      = " + omodel.HProcID +
                    " where HInterID = " + omodel.HInterID;

                oCn.RunProc(mainSql);
                //删除关联
                DeleteRelation(ref sReturn, lngBillKey);
                //删除子表
                DeleteBillSub(lngBillKey);

                //插入子表
                omodel.HInterID = lngBillKey;
                foreach (Model.ClsGy_SourceMouldBillSub oSub in DetailColl)
                {
                    string subSql = "insert into Gy_SourceMouldBillSub" +
                            "(HInterID,HEntryID,HSourceInterID,HSourceEntryID,HSourceBillNo,HSourceBillType" +
                            ",HMouldID,HQty,HMouldQty,HRate) " +
                            " values(" +
                            "" + omodel.HInterID.ToString() +
                            "," + oSub.HEntryID.ToString() +
                            "," + oSub.HSourceInterID +
                            "," + oSub.HSourceEntryID +
                            ",'" + oSub.HSourceBillNo +
                            "','" + oSub.HSourceBillType +
                            "','" + oSub.HMouldID +
                            "'," + oSub.HQty +
                            "," + oSub.HMouldQty +
                            ",'" + oSub.HRate +
                            "')";
                    oCn.RunProc(subSql);
                }

                sReturn = "修改单据成功！";
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                sReturn = e.Message;
                oCn.RollBack();
                throw (e);
            }
        }
        //#endregion

        #region  æ–°å¢žå•æ®
        public override bool AddBill(ref string sReturn)
        {
            try
            {
                DataSet ds;


                oCn.BeginTran();

                //检查主表内码是否重复，若重复则重新生成并继续检查，直到不再重复
                while (true)
                {
                    ds = oCn.RunProcReturn("select * from Gy_SourceMouldBillMain where HInterID = " + omodel.HInterID, "Gy_SourceMouldBillMain");
                    if (ds != null && ds.Tables[0].Rows.Count > 0)
                    {
                        omodel.HInterID = DBUtility.ClsPub.CreateBillID(BillType, ref DBUtility.ClsPub.sExeReturnInfo);
                    }
                    else
                    {
                        break;
                    }
                }

                //插入主表
                string mainSql = "insert into Gy_SourceMouldBillMain" +
                    "(HYear,HPeriod,HBillType,HBillSubType,HInterID,HDate,HBillNo,HRemark,HMaker,HMakeDate" +
                    ",HDeptID,HEmpID,HSourceID,HWorkCenterID,HEquipID,HOrgID,HProcID) " +
                    "values(" +
                    "" + omodel.HYear.ToString() +
                    "," + omodel.HPeriod.ToString() +
                    ",'" + this.BillType +
                    "','" + this.HBillSubType +
                    "'," + omodel.HInterID +
                    ",'" + omodel.HDate +
                    "','" + omodel.HBillNo +
                    "','" + omodel.HRemark +
                    "','" + omodel.HMaker +
                    "',getdate()" +
                    "," + omodel.HDeptID +
                    "," + omodel.HEmpID +
                    ",'" + omodel.HSourceID +
                    "','" + omodel.HWorkCenterID +
                    "','" + omodel.HEquipID +
                    "','" + omodel.HOrgID +
                    "'," + omodel.HProcID +
                    ")";

                oCn.RunProc(mainSql);

                //插入子表
                foreach (Model.ClsGy_SourceMouldBillSub oSub in DetailColl)
                {
                    string subSql = "insert into Gy_SourceMouldBillSub" +
                           "" +
                           "" +
                           "" +
                           "(HInterID,HEntryID,HSourceInterID,HSourceEntryID,HSourceBillNo,HSourceBillType" +
                           ",HMouldID,HQty,HMouldQty,HRate) " +
                           " values(" +
                           "" + omodel.HInterID.ToString() +
                           "," + oSub.HEntryID.ToString() +
                           "," + oSub.HSourceInterID +
                           "," + oSub.HSourceEntryID +
                           ",'" + oSub.HSourceBillNo +
                           "','" + oSub.HSourceBillType +
                           "','" + oSub.HMouldID +
                           "'," + oSub.HQty +
                           "," + oSub.HMouldQty +
                           ",'" + oSub.HRate +
                           "')";
                    oCn.RunProc(subSql);
                }
                sReturn = "新增单据成功！";
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                sReturn = e.Message;
                oCn.RollBack();
                throw (e);
            }
        }
        #endregion

        #region æ˜¾ç¤ºå•æ®
        public override bool ShowBill(Int64 lngBillKey, ref string sReturn)
        {
            try
            {
                //查询主表
                DataSet Ds;
                Ds = oCn.RunProcReturn("select * from Gy_SourceMouldBillMain Where HInterID = " + lngBillKey.ToString(), "Gy_SourceMouldBillMain");
                if (Ds.Tables[0].Rows.Count == 0)
                {
                    sReturn = "单据未找到！";
                    return false;
                }

                //固定赋值===========================================
                omodel.HYear = DBUtility.ClsPub.isLong(Ds.Tables[0].Rows[0]["HYear"]);
                omodel.HPeriod = DBUtility.ClsPub.isLong(Ds.Tables[0].Rows[0]["HPeriod"]);
                omodel.HBillType = DBUtility.ClsPub.isStrNull(Ds.Tables[0].Rows[0]["HBillType"]);
                omodel.HBillSubType = DBUtility.ClsPub.isStrNull(Ds.Tables[0].Rows[0]["HBillSubType"]);
                omodel.HInterID = DBUtility.ClsPub.isLong(Ds.Tables[0].Rows[0]["HInterID"]);
                omodel.HDate = DBUtility.ClsPub.isDate(Ds.Tables[0].Rows[0]["HDate"]);
                omodel.HBillNo = Ds.Tables[0].Rows[0]["HBillNo"].ToString().Trim();
                omodel.HBillStatus = DBUtility.ClsPub.isInt(Ds.Tables[0].Rows[0]["HBillStatus"]);
                omodel.HCheckItemNowID = DBUtility.ClsPub.isLong(Ds.Tables[0].Rows[0]["HCheckItemNowID"]);
                omodel.HCheckItemNextID = DBUtility.ClsPub.isLong(Ds.Tables[0].Rows[0]["HCheckItemNextID"]);
                omodel.HCheckFlowID = DBUtility.ClsPub.isLong(Ds.Tables[0].Rows[0]["HCheckFlowID"]);
                omodel.HRemark = Ds.Tables[0].Rows[0]["HRemark"].ToString().Trim();
                omodel.HBackDate = Ds.Tables[0].Rows[0]["HBackDate"].ToString().Trim();
                omodel.HBacker = Ds.Tables[0].Rows[0]["HBacker"].ToString().Trim();
                omodel.HCheckDate = Ds.Tables[0].Rows[0]["HCheckDate"].ToString().Trim();
                omodel.HChecker = Ds.Tables[0].Rows[0]["HChecker"].ToString().Trim();
                omodel.HMaker = Ds.Tables[0].Rows[0]["HMaker"].ToString().Trim();
                omodel.HMakeDate = Ds.Tables[0].Rows[0]["HMakeDate"].ToString().Trim();
                omodel.HUpDateDate = Ds.Tables[0].Rows[0]["HUpDateDate"].ToString().Trim();
                omodel.HUpDater = Ds.Tables[0].Rows[0]["HUpDater"].ToString().Trim();
                omodel.HCloseDate = Ds.Tables[0].Rows[0]["HCloseDate"].ToString().Trim();
                omodel.HCloseMan = Ds.Tables[0].Rows[0]["HCloseMan"].ToString().Trim();
                omodel.HCloseType = DBUtility.ClsPub.isBool(Ds.Tables[0].Rows[0]["HCloseType"]);
                omodel.HDeleteDate = Ds.Tables[0].Rows[0]["HDeleteDate"].ToString().Trim();
                omodel.HDeleteMan = Ds.Tables[0].Rows[0]["HDeleteMan"].ToString().Trim();
                //========================================================

                omodel.HOrgID = DBUtility.ClsPub.isLong(Ds.Tables[0].Rows[0]["HOrgID"]);


                //

                //循环
                DataSet DsSub;
                DsSub = oCn.RunProcReturn("select * from Gy_SourceMouldBillSub where HInterID = " + lngBillKey.ToString() + "order by HEntryID", "Gy_SourceMouldBillSub");
                DetailColl.Clear();//清空
                for (int i = 0; i < DsSub.Tables[0].Rows.Count; i++)
                {
                    Model.ClsGy_SourceMouldBillSub oSub = new Model.ClsGy_SourceMouldBillSub();
                    // å›ºå®šèµ‹å€¼===============================================
                    oSub.HInterID = DBUtility.ClsPub.isLong(DsSub.Tables[0].Rows[i]["HInterID"]);
                    oSub.HEntryID = DBUtility.ClsPub.isLong(DsSub.Tables[0].Rows[i]["HEntryID"]);
                    oSub.HSourceInterID = DBUtility.ClsPub.isLong(DsSub.Tables[0].Rows[i]["HSourceInterID"]);
                    oSub.HSourceEntryID = DBUtility.ClsPub.isLong(DsSub.Tables[0].Rows[i]["HSourceEntryID"]);
                    oSub.HSourceBillType = DsSub.Tables[0].Rows[i]["HSourceBillType"].ToString().Trim();
                    oSub.HSourceBillNo = DsSub.Tables[0].Rows[i]["HSourceBillNo"].ToString().Trim();
                    oSub.HRelationQty = DBUtility.ClsPub.isDoule(DsSub.Tables[0].Rows[i]["HRelationQty"]);
                    oSub.HRelationMoney = DBUtility.ClsPub.isDoule(DsSub.Tables[0].Rows[i]["HRelationMoney"]);
                    oSub.HCloseMan = DBUtility.ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HCloseMan"]);
                    oSub.HCloseType = DBUtility.ClsPub.isBool(DsSub.Tables[0].Rows[i]["HCloseType"]);
                    oSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DsSub.Tables[0].Rows[i]["HEntryCloseDate"]);
                    oSub.HRemark = DsSub.Tables[0].Rows[i]["HRemark"].ToString().Trim();
                    //===================================================


                    DetailColl.Add(oSub);
                }
                sReturn = "显示单据成功！";
                return true;
            }
            catch (Exception e)
            {
                sReturn = e.Message;
                throw (e);
            }
        }
        #endregion

    }

}

 Model/Model.csproj

@@ -155,6 +155,8 @@
    <Compile Include="生产管理\模具管理\ClsSc_MouldMaintainPlanBillSub_Plan.cs" />
    <Compile Include="系统公用\ClsXt_DefineBillMainSetSub.cs" />
    <Compile Include="系统公用\ClsXt_DefineBillMainSetMain.cs" />
    <Compile Include="计划管理\ClsGy_SourceMouldBillMain.cs" />
    <Compile Include="计划管理\ClsGy_SourceMouldBillSub.cs" />
    <Compile Include="质检管理\ClsQC_EnvironmentTestDotCheckBillMain.cs" />
    <Compile Include="质检管理\ClsQC_EnvironmentTestDotCheckBillSub.cs" />
    <Compile Include="质检管理\ClsQC_MonthTarGetBillMain.cs" />

 Model/¼Æ»®¹ÜÀí/ClsGy_SourceMouldBillMain.cs

New file
@@ -0,0 +1,17 @@
using System;
using System.Collections.Generic;
using System.Text;
namespace Model
{
    public class ClsGy_SourceMouldBillMain : DBUtility.ClsXt_BaseBillMain
    {
        public Int64 HOrgID;        //int       ç»„织
        public Int64 HDeptID;         //int       éƒ¨é—¨
        public Int64 HEmpID;         //int       è´Ÿè´£äºº
        public Int64 HSourceID;         //int       äº§çº¿
        public Int64 HWorkCenterID;    //int       å·¥ä½œä¸­å¿ƒ
        public Int64 HEquipID;    //int      è®¾å¤‡ID

        public Int64 HProcID; //工序ID
    }
}

 Model/¼Æ»®¹ÜÀí/ClsGy_SourceMouldBillSub.cs

New file
@@ -0,0 +1,14 @@
using System;
using System.Collections.Generic;
using System.Text;

namespace Model
{
    public class ClsGy_SourceMouldBillSub : DBUtility.ClsXt_BaseBillSub
    {
        public Int64 HMouldID;
        public Int64 HMouldQty;
        public decimal HQty;
        public decimal HRate;
    }
}

 WebAPI/Controllers/JHGL/Gy_SourceMouldBillController.cs

New file
@@ -0,0 +1,648 @@
using DBUtility;
using Model;
using Newtonsoft.Json;
using Newtonsoft.Json.Linq;
using System;
using System.Collections.Generic;
using System.Data;
using System.Linq;
using System.Web;
using System.Web.Http;
using System.Windows.Forms;
using WebAPI.Models;


namespace WebAPI.Controllers.JHGL
{
    public class Gy_SourceMouldBillController : ApiController
    {
        private json objJsonResult = new json();
        public DataSet ds = new DataSet();
        SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
        public DAL.ClsGy_SourceMouldBillMain BillNew1 = new DAL.ClsGy_SourceMouldBillMain();   //产品器具清单对应单据类
        public DAL.ClsGy_SourceMouldBillMain BillOld1 = new DAL.ClsGy_SourceMouldBillMain();
        public DBUtility.ClsPub.Enum_BillStatus BillStatus;//单据状态（新增，修改，浏览，更新单价，变更）


        #region äº§çº¿å™¨å…·æ¸…单单列表
        [Route("Gy_SourceMouldBill/Gy_SourceMouldBillList")]
        [HttpGet]
        public object Gy_SourceMouldBillList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                //查询权限
                if (!DBUtility.ClsPub.Security_Log("Gy_SourceMouldBill_Query", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                if (sWhere == null || sWhere.Equals(""))
                {
                    ds = oCN.RunProcReturn("select * from h_v_Gy_SourceMouldBillMainList order by å•æ®å· desc", "h_v_Gy_SourceMouldBillMainList");
                }
                else
                {
                    string sql1 = "select * from h_v_Gy_SourceMouldBillMainList where 1 = 1 ";
                    string sql = sql1 + sWhere + " order by å•æ®å· desc";
                    ds = oCN.RunProcReturn(sql, "h_v_Gy_SourceMouldBillMainList");
                }
                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }


                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception ex)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region äº§å“å™¨å…·æ¸…单编辑时获取表体数据
        [Route("Gy_SourceMouldBill/Gy_SourceMouldBillEditList")]
        [HttpGet]
        public object Gy_SourceMouldBillEditList(string HInterID, string User)
        {
            try
            {
                //查看权限
                if (!DBUtility.ClsPub.Security_Log("Gy_SourceMouldBill_Edit", 1, false, User))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                if (HInterID == null || HInterID.Equals(""))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HInterID不能为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                ds = oCN.RunProcReturn("select * from h_v_Gy_SourceMouldBill_Edit where HInterID = " + HInterID, "h_v_Gy_SourceMouldBill_Edit");

                if (ds != null && ds.Tables.Count > 0)
                {
                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "Sucess！";
                    objJsonResult.data = ds.Tables[0];
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有查询到数据！";
                    objJsonResult.data = "";
                    return objJsonResult;
                }                
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region äº§å“å™¨å…·æ¸…单 ä¿å­˜/编辑
        /// <summary>
        /// ä¿å­˜æ¨¡å…·ç»´ä¿®å•
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("Gy_SourceMouldBill/SaveGy_SourceMouldBillMain")]
        [HttpPost]
        public object SaveGy_SourceMouldBillMain([FromBody] JObject sMainSub)
        {
            var _value = sMainSub["sMainSub"].ToString();
            string msg1 = _value.ToString();
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString(); //子表
            string refSav = sArray[2].ToString();//操作方式数据类型 1添加 3修改 2 å¤åˆ¶
            string user = sArray[3].ToString();//用户名

            string UserName = "";
            string s = "";
            ListModels oListModels = new ListModels();
            try
            {
                //保存权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_SourceMouldBill_Edit", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无保存权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                DAL.ClsGy_SourceMouldBillMain oBill = new DAL.ClsGy_SourceMouldBillMain();
                List<Model.ClsGy_SourceMouldBillMain> lsmain = new List<Model.ClsGy_SourceMouldBillMain>();
                msg2 = msg2.Replace("\\", "");
                msg2 = msg2.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_SourceMouldBillMain(msg2);
                foreach (Model.ClsGy_SourceMouldBillMain oItem in lsmain)
                {
                    if (refSav == "Add")
                    {
                        //单据号是否重复
                        if (BillNew1.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, BillOld1.omodel.HInterID))
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据号重复！不允许保存！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                    }
                    if (refSav == "Update")
                    {
                        if (BillOld1.ShowBill(oItem.HInterID, ref s) == false)
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "此单据有误！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //判断是否可编辑
                        if (BillOld1.omodel.HChecker != "" && BillOld1.omodel.HChecker != null)
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "此单据已经被审核，不允许修改！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        if (BillOld1.omodel.HBillStatus > 1)
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "此单据处于不可编辑状态，不允许修改！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        if (!DBUtility.Xt_BaseBillFun.Fun_AllowEditBill(BillOld1, ref s))
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = s + "，不允许修改";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                    }
                    UserName = oItem.HMaker;  //制单人
                    oItem.HBillType = "4617";
                    oItem.HBillSubType = "4617";

                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
                    oItem.HPeriod = DBUtility.ClsPub.isLong(DateTime.Now.Month);
                    oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));

                    if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oBill.omodel = oItem;
                }
                // è¡¨ä½“数据
                //按 },{来拆分数组 //去掉【和】
                msg3 = msg3.Substring(1, msg3.Length - 2);
                msg3 = msg3.Replace("\\", "");
                msg3 = msg3.Replace("\n", "");  //\n
                List<Model.ClsGy_SourceMouldBillSub> ls = new List<Model.ClsGy_SourceMouldBillSub>();
                ls = oListModels.getObjectByJson_Gy_SourceMouldBillSub(msg3);
                int i = 0;
                foreach (Model.ClsGy_SourceMouldBillSub oItemSub in ls)
                {
                    i++;
                    oItemSub.HEntryID = i;

                    oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
                    oItemSub.HCloseType = false;   //关闭类型

                    oBill.DetailColl.Add(oItemSub);

                }
                //保存
                //保存完毕后处理
                bool bResult;
                if (refSav == "Add")
                {

                    bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                }
                else if (refSav == "Update")
                {
                    bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                }
                else
                {
                    bResult = false;
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }
        #endregion

        #region äº§çº¿å™¨å…·æ¸…单记录删除功能
        [Route("Gy_SourceMouldBill/DeleteGy_SourceMould")]
        [HttpGet]
        public object DeleteGy_SourceMould(string HInterID, string user)
        {
            try
            {
                //删除权限
                if (!DBUtility.ClsPub.Security_Log("Gy_SourceMouldBill_Delete", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                if (HInterID == null || HInterID.Equals(""))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HInterID不能为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                oCN.RunProc("delete from Gy_SourceMouldBillMain where HInterID = " + HInterID);
                oCN.RunProc("delete from Gy_SourceMouldBillSub where HInterID = " + HInterID);

                oCN.Commit();

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "删除成功！";
                objJsonResult.data = null;
                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region äº§å“å™¨å…·æ¸…单列表 å®¡æ ¸/反审核功能
        [Route("Gy_SourceMouldBill/CheckGy_SourceMouldBillMain")]
        [HttpGet]
        public object CheckGy_SourceMouldBillMain(int HInterID, int IsAudit, string CurUserName)
        {
            DBUtility.ClsPub.CurUserName = CurUserName;
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_SourceMouldBill_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                //HInterID数据判断
                if (HInterID <= 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HInterID小于0！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }


                Int64 lngBillKey = 0;
                lngBillKey = DBUtility.ClsPub.isLong(HInterID);                                         //对HInterID进行类型的转换
                DAL.ClsGy_SourceMouldBillMain oBill = new DAL.ClsGy_SourceMouldBillMain();                              //实例化单据操作类，用于进行相关操作

                //针对需要进行的操作，检验当前单据的状态是否支持需要进行的操作
                if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))                    //根据HInterID获取该单据的数据
                {
                    if (oBill.omodel.HCloseMan.Trim() != "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据已关闭!不能再次审核！";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    if (oBill.omodel.HDeleteMan.Trim() != "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据已作废!不能再次审核！";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    if (IsAudit == 0)  //审核判断
                    {
                        if (oBill.omodel.HChecker.Trim() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (oBill.omodel.HChecker.Trim() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }


                //进行需要进行的审核/反审核操作
                if (IsAudit == 0) //审核提交
                {
                    oCN.BeginTran();

                    //记录返回信息
                    string msg = "";



                    //审核前控制=========================================      
                    string sql1 = "exec h_p_Gy_SourceMouldBill_BeforeCheckCtrl " + oBill.omodel.HInterID + ",'" + oBill.omodel.HBillNo + "','" + CurUserName + "'";
                    ds = oCN.RunProcReturn(sql1, "h_p_Gy_SourceMouldBill_BeforeCheckCtrl");
                    if (ds == null || ds.Tables.Count == 0 || ds.Tables[0].Rows.Count == 0)
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "审核失败!原因:审核前判断失败，请与网络管理人员联系";
                        objJsonResult.data = null;
                        oCN.RollBack();
                        return objJsonResult;
                    }

                    if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
                        objJsonResult.data = null;
                        oCN.RollBack();
                        return objJsonResult;
                    }
                    //==================================================================================      

                    //审核提交
                    if (oBill.CheckBill(oBill.omodel.HInterID, oBill.omodel.HBillNo, "h_p_Gy_SourceMouldBill_AfterCheckCtrl", CurUserName, ref DBUtility.ClsPub.sExeReturnInfo) == true)
                    {
                        oCN.Commit();

                        objJsonResult.code = "1";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "审核成功！" + msg;
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    else
                    {
                        oCN.RollBack();

                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "审核失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                }
                if (IsAudit == 1) //反审核提交
                {

                    //反审核前控制=========================================        
                    string sql1 = "exec h_p_Gy_SourceMouldBill_BeforeUnCheckCtrl " + oBill.omodel.HInterID + ",'" + oBill.omodel.HBillNo + "','" + CurUserName + "'";
                    ds = oCN.RunProcReturn(sql1, "h_p_Gy_SourceMouldBill_BeforeUnCheckCtrl");
                    if (ds == null || ds.Tables.Count == 0 || ds.Tables[0].Rows.Count == 0)
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "反审核失败!原因:反审核前判断失败，请与网络管理人员联系";
                        objJsonResult.data = null;
                        return objJsonResult;

                    }
                    if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "反审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    //===========================================================          

                    //反审核提交AbandonCheck
                    if (oBill.AbandonCheck(oBill.omodel.HInterID, oBill.omodel.HBillNo, "h_p_Gy_SourceMouldBill_AfterUnCheckCtrl", CurUserName, ref DBUtility.ClsPub.sExeReturnInfo) == true)
                    {
                        objJsonResult.code = "1";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "反审核成功";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    else
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "反审核失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                }
                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();

                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }

        }
        #endregion

        #region äº§çº¿å™¨å…·æ¸…单列表 å…³é—­/反关闭功能
        [Route("Gy_SourceMouldBill/CloseGy_SourceMouldBillMain")]
        [HttpGet]
        public object CloseGy_SourceMouldBillMain(string HInterID, int IsAudit, string user)
        {
            try
            {
                //判断是否有关闭权限
                if (!DBUtility.ClsPub.Security_Log("Gy_SourceMouldBill_Close", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无权限关闭!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }


                var ds = oCN.RunProcReturn("select * from Gy_SourceMouldBillMain  where HInterID=" + HInterID, "Gy_SourceMouldBillMain");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //关闭判断
                    {
                        if (ds.Tables[0].Rows[0]["HCloseMan"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已关闭!不能再次关闭！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反关闭判断
                    {
                        if (ds.Tables[0].Rows[0]["HCloseMan"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未关闭!不需要反关闭!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //关闭判断
                {
                    oCN.RunProc("update Gy_SourceMouldBillMain  set HCloseMan='" + user + "',HCloseDate=getdate() where HInterID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "关闭成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_SourceMouldBillMain  set HCloseMan='',HCloseDate=null where HInterID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反关闭成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "执行失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

    }
}

 WebAPI/ListModels.cs

@@ -1637,6 +1637,30 @@
        }

        /// <summary>
        /// å¤„理新增产线器具清单表的json
        /// </summary>
        /// <param name="jsonString"></param>
        /// <returns></returns>
        public List<Model.ClsGy_SourceMouldBillMain> getObjectByJson_Gy_SourceMouldBillMain(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_SourceMouldBillMain> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_SourceMouldBillMain>>(jsonString);
            return list;
        }

        /// <summary>
        /// å¤„理新增产线器具清单子表的json
        /// </summary>
        /// <param name="jsonString"></param>
        /// <returns></returns>
        public List<Model.ClsGy_SourceMouldBillSub> getObjectByJson_Gy_SourceMouldBillSub(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_SourceMouldBillSub> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_SourceMouldBillSub>>(jsonString);
            return list;
        }

        /// <summary>
        /// å¤„理新增产品工艺参数清单表的json
        /// </summary>
        /// <param name="jsonString"></param>

 WebAPI/WebAPI.csproj

@@ -441,6 +441,7 @@
    <Compile Include="Controllers\CJGL\Sc_KeyElementBindingController.cs" />
    <Compile Include="Controllers\CJGL\Sc_OEEReportController.cs" />
    <Compile Include="Controllers\CKGL\TMZD\Gy_BarCodeBillListController.cs" />
    <Compile Include="Controllers\JHGL\Gy_SourceMouldBillController.cs" />
    <Compile Include="Controllers\Xt_DefineBillMainSetController.cs" />
    <Compile Include="Controllers\MJGL\Sc_MouldBatchWorkCheckBillController.cs" />
    <Compile Include="Controllers\SBGL\SBBB\Sb_EquipMentCollectionTechParamController.cs" />