增加 岗位,岗位列表,岗位技能,岗位技能列表,出库类型,入库类型,调拨类型模块,审查,反审查,禁用,反禁用,刷新,按钮设置,列设置；

zrg

2024-01-04 32481e52571bc04b97c0be02c6531ec33f34a67b

增加 岗位,岗位列表,岗位技能,岗位技能列表,出库类型,入库类型,调拨类型模块,审查,反审查,禁用,反禁用,刷新,按钮设置,列设置；

 DAL/ÏúÊÛ¹ÜÀí/ClsXs_SeOrderBill.cs

@@ -115,7 +115,7 @@

                    string subSql = "Insert into Xs_SeOrderBillSub" +
                        "(HInterID,HEntryID,HSourceInterID,HSourceEntryID,HSourceBillNo,HSourceBillType,HRelationQty,HRelationMoney,HMaterID,HUnitID,HQty,HPrice,HTaxPrice,HMoney" +
                        ",HDiscountRate,HRelTaxPrice,HTaxRate,HTaxMoney,HlineTotal,HlineTotalBB,HDate,HOutStockQty,HInvoiceQty,HRemark) " +
                        ",HDiscountRate,HRelTaxPrice,HTaxRate,HTaxMoney,HlineTotal,HlineTotalBB,HDate,HOutStockQty,HInvoiceQty,HRemark,HOrderLevID ) " +
                        "values(" +
                        "" + omodel.HInterID +
                        "," + oSub.HEntryID +
@@ -139,8 +139,9 @@
                        "," + oSub.HlineTotalBB +
                        ",'" + oSub.HDate +
                        "'," + oSub.HOutStockQty +
                        "," + oSub.HInvoiceQty +
                        "," + oSub.HInvoiceQty + 
                        ",'" + oSub.HRemark +
                        ",'" + oSub.HOrderLevID +
                        "')";
                    oCn.RunProc(subSql);
                }
@@ -285,7 +286,7 @@
                    //  ") ");
                    string subSql = "Insert into Xs_SeOrderBillSub" +
                        "(HInterID,HEntryID,HSourceInterID,HSourceEntryID,HSourceBillNo,HSourceBillType,HRelationQty,HRelationMoney,HMaterID,HUnitID,HQty,HPrice,HTaxPrice,HMoney" +
                        ",HDiscountRate,HRelTaxPrice,HTaxRate,HTaxMoney,HlineTotal,HlineTotalBB,HDate,HOutStockQty,HInvoiceQty,HRemark) " +
                        ",HDiscountRate,HRelTaxPrice,HTaxRate,HTaxMoney,HlineTotal,HlineTotalBB,HDate,HOutStockQty,HInvoiceQty,HRemark,HOrderLevID) " +
                        "values(" +
                        "" + omodel.HInterID +
                        "," + oSub.HEntryID +
@@ -311,6 +312,7 @@
                        "'," + oSub.HOutStockQty +
                        "," + oSub.HInvoiceQty +
                        ",'" + oSub.HRemark +
                        "','" + oSub.HOrderLevID +
                        "')";
                    oCn.RunProc(subSql);
                }

 Model/Model.csproj

@@ -333,6 +333,8 @@
    <Compile Include="基础资料\基础资料\ClsGy_BadResult_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_InspectInstruMent_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_InspectBasis_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_PostSkill_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_StockMoveStyle_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_QualityStd_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_InspectMethod_Model.cs" />
    <Compile Include="基础资料\基础资料\ClsGy_InspectValue_Model .cs" />

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_PostSkill_Model.cs

New file
@@ -0,0 +1,16 @@
using System;
using System.Collections.Generic;
using System.Text;

namespace Model
{
    public class ClsGy_PostSkill_Model : DBUtility.ClsGy_Base_Model
    {

        public DateTime HMakeTime;
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_Post_Model.cs

@@ -6,6 +6,10 @@
{
    public class ClsGy_Post_Model : DBUtility.ClsGy_Base_Model
    {
       //
        public DateTime HMakeTime;
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_StockInStyle_Model.cs

@@ -6,6 +6,10 @@
{
    public class ClsGy_StockInStyle_Model : DBUtility.ClsGy_Base_Model
    {
       //
        public DateTime HMakeTime;
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_StockMoveStyle_Model.cs

New file
@@ -0,0 +1,15 @@
using System;
using System.Collections.Generic;
using System.Text;

namespace Model
{
    public class ClsGy_StockMoveStyle_Model : DBUtility.ClsGy_Base_Model
    {
        public DateTime HMakeTime;
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 Model/»ù´¡×ÊÁÏ/»ù´¡×ÊÁÏ/ClsGy_StockOutStyle_Model.cs

@@ -6,6 +6,10 @@
{
    public class ClsGy_StockOutStyle_Model : DBUtility.ClsGy_Base_Model
    {
       //
        public DateTime HMakeTime;
        public int HUSEORGID;
        public string HMakeEmp;
        public DateTime HModifyTime;
        public int HERPItemID;
    }
}

 Model/ÏúÊÛ¹ÜÀí/ClsXs_SeOrderBillSub.cs

@@ -80,5 +80,6 @@
        public Int64 HSELLERWITHHOLDING;
        public Int64 HBUYERWITHHOLDING;
        public Int64 HPRICELISTENTRY;
        public Int64 HOrderLevID;
    }
}

 WebAPI/Controllers/BaseSet/Gy_BadReasonController.cs

@@ -1756,7 +1756,7 @@

                string sql1 = "select * from h_v_Gy_InspectBasis where 1 = 1";
                string sql = sql1 + sWhere + " order by æ£€éªŒä¾æ®ä»£ç  ";
                ds = oCN.RunProcReturn(sql, "h_v_Gy_InspectInstruMent");
                ds = oCN.RunProcReturn(sql, "h_v_Gy_InspectBasis");

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
@@ -1972,6 +1972,1216 @@
        }
        #endregion

        #region  å²—位技能  æŸ¥è¯¢,审核，反审核，禁用，反禁用
        /// <summary>
        /// å²—位技能  æŸ¥è¯¢
        /// </summary>
        /// <param name="sWhere"></param>
        /// <param name="user"></param>
        /// <returns></returns>
        [Route("Gy_BadReason/Gy_PostSkillList")]
        [HttpGet]
        public object Gy_PostSkillList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                //查看权限
                if (!DBUtility.ClsPub.Security_Log("Gy_PostSkill_Query", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                string sql1 = "select * from  h_v_Gy_PostSkill where 1 = 1";
                string sql = sql1 + sWhere + " order by å²—位技能代码 ";
                ds = oCN.RunProcReturn(sql, "h_v_Gy_PostSkill");

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// å²—位技能 å®¡æ ¸ã€åå®¡æ ¸
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/AuditGy_PostSkill")]
        [HttpGet]
        public object AuditGy_PostSkill(int HInterID, int IsAudit, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_PostSkill_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_PostSkill where HItemID=" + HInterID, "Gy_PostSkill");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //审核判断
                {
                    oCN.RunProc("update Gy_PostSkill set HCheckEmp='" + CurUserName + "',HCheckTime=getdate() where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_PostSkill set HCheckEmp='',HCheckTime=null where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }



        /// <summary>
        /// å²—位技能 ç¦ç”¨ã€åç¦ç”¨
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsStop">禁用(0),反禁用(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/StopGy_PostSkill")]
        [HttpGet]
        public object StopGy_PostSkill(int HInterID, int IsStop, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_PostSkill_Close", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "禁用失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_PostSkill where HItemID=" + HInterID, "Gy_PostSkill");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsStop == 0)  //禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已禁用!不能再次禁用！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsStop == 1) //反禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未禁用!不需要反禁用!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsStop == 0)  //禁用判断
                {
                    oCN.RunProc("update Gy_PostSkill set HStopEmp='" + CurUserName + "',HStopTime=getdate(),HStopflag=1 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "禁用成功";
                    objJsonResult.data = null;
                }
                if (IsStop == 1) //反禁用判断
                {
                    oCN.RunProc("update Gy_PostSkill set HStopEmp='',HStopTime=null,HStopflag=0 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反禁用成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "禁用失败或者反禁用失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  å²—位  æŸ¥è¯¢,审核，反审核，禁用，反禁用
        /// <summary>
        /// å²—位  æŸ¥è¯¢
        /// </summary>
        /// <param name="sWhere"></param>
        /// <param name="user"></param>
        /// <returns></returns>
        [Route("Gy_BadReason/Gy_PostList")]
        [HttpGet]
        public object Gy_PostList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                //查看权限
                if (!DBUtility.ClsPub.Security_Log("Gy_Post_Query", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                string sql1 = "select * from  h_v_Gy_Post where 1 = 1";
                string sql = sql1 + sWhere + " order by å²—位代码 ";
                ds = oCN.RunProcReturn(sql, "h_v_Gy_Post");

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// å²—位 å®¡æ ¸ã€åå®¡æ ¸
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/AuditGy_Post")]
        [HttpGet]
        public object AuditGy_Post(int HInterID, int IsAudit, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_Post_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_Post where HItemID=" + HInterID, "Gy_Post");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //审核判断
                {
                    oCN.RunProc("update Gy_Post set HCheckEmp='" + CurUserName + "',HCheckTime=getdate() where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_Post set HCheckEmp='',HCheckTime=null where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }



        /// <summary>
        /// å²—位 ç¦ç”¨ã€åç¦ç”¨
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsStop">禁用(0),反禁用(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/StopGy_Post")]
        [HttpGet]
        public object StopGy_Post(int HInterID, int IsStop, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_Post_Close", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "禁用失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_Post where HItemID=" + HInterID, "Gy_Post");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsStop == 0)  //禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已禁用!不能再次禁用！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsStop == 1) //反禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未禁用!不需要反禁用!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsStop == 0)  //禁用判断
                {
                    oCN.RunProc("update Gy_Post set HStopEmp='" + CurUserName + "',HStopTime=getdate(),HStopflag=1 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "禁用成功";
                    objJsonResult.data = null;
                }
                if (IsStop == 1) //反禁用判断
                {
                    oCN.RunProc("update Gy_Post set HStopEmp='',HStopTime=null,HStopflag=0 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反禁用成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "禁用失败或者反禁用失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  è°ƒæ‹¨ç±»åž‹  æŸ¥è¯¢,审核，反审核，禁用，反禁用
        /// <summary> 
        /// è°ƒæ‹¨ç±»åž‹  æŸ¥è¯¢
        /// </summary>
        /// <param name="sWhere"></param>
        /// <param name="user"></param>
        /// <returns></returns>
        [Route("Gy_BadReason/Gy_StockMoveStyleList")]
        [HttpGet]
        public object Gy_StockMoveStyleList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                //查看权限
                if (!DBUtility.ClsPub.Security_Log("Gy_StockMoveStyle_Query", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                string sql1 = "select * from  h_v_Gy_StockMoveStyle where 1 = 1";
                string sql = sql1 + sWhere + " order by è°ƒæ‹¨ç±»åž‹ä»£ç  ";
                ds = oCN.RunProcReturn(sql, "h_v_Gy_StockMoveStyle");

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// è°ƒæ‹¨ç±»åž‹ å®¡æ ¸ã€åå®¡æ ¸
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/AuditGy_StockMoveStyle")]
        [HttpGet]
        public object AuditGy_StockMoveStyle(int HInterID, int IsAudit, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_StockMoveStyle_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_StockMoveStyle where HItemID=" + HInterID, "Gy_StockMoveStyle");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //审核判断
                {
                    oCN.RunProc("update Gy_StockMoveStyle set HCheckEmp='" + CurUserName + "',HCheckTime=getdate() where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_StockMoveStyle set HCheckEmp='',HCheckTime=null where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }



        /// <summary>
        /// è°ƒæ‹¨ç±»åž‹ ç¦ç”¨ã€åç¦ç”¨
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsStop">禁用(0),反禁用(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/StopGy_StockMoveStyle")]
        [HttpGet]
        public object StopGy_StockMoveStyle(int HInterID, int IsStop, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_StockMoveStyle_Close", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "禁用失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_StockMoveStyle where HItemID=" + HInterID, "Gy_StockMoveStyle");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsStop == 0)  //禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已禁用!不能再次禁用！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsStop == 1) //反禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未禁用!不需要反禁用!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsStop == 0)  //禁用判断
                {
                    oCN.RunProc("update Gy_StockMoveStyle set HStopEmp='" + CurUserName + "',HStopTime=getdate(),HStopflag=1 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "禁用成功";
                    objJsonResult.data = null;
                }
                if (IsStop == 1) //反禁用判断
                {
                    oCN.RunProc("update Gy_StockMoveStyle set HStopEmp='',HStopTime=null,HStopflag=0 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反禁用成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "禁用失败或者反禁用失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  å…¥åº“类型  æŸ¥è¯¢,审核，反审核，禁用，反禁用
        /// <summary> 
        /// å…¥åº“类型  æŸ¥è¯¢
        /// </summary>
        /// <param name="sWhere"></param>
        /// <param name="user"></param>
        /// <returns></returns>
        [Route("Gy_BadReason/Gy_StockInStyleList")]
        [HttpGet]
        public object Gy_StockInStyleList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                //查看权限
                if (!DBUtility.ClsPub.Security_Log("Gy_StockInStyle_Query", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                string sql1 = "select * from  h_v_Gy_StockInStyle where 1 = 1";
                string sql = sql1 + sWhere + " order by å…¥åº“类型代码 ";
                ds = oCN.RunProcReturn(sql, "h_v_Gy_StockInStyle");

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// å…¥åº“类型 å®¡æ ¸ã€åå®¡æ ¸
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/AuditGy_StockInStyle")]
        [HttpGet]
        public object AuditGy_StockInStyle(int HInterID, int IsAudit, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_StockInStyle_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_StockInStyle where HItemID=" + HInterID, "Gy_StockInStyle");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //审核判断
                {
                    oCN.RunProc("update Gy_StockInStyle set HCheckEmp='" + CurUserName + "',HCheckTime=getdate() where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_StockInStyle set HCheckEmp='',HCheckTime=null where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }



        /// <summary>
        /// å…¥åº“类型 ç¦ç”¨ã€åç¦ç”¨
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsStop">禁用(0),反禁用(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/StopGy_StockInStyle")]
        [HttpGet]
        public object StopGy_StockInStyle(int HInterID, int IsStop, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_StockInStyle_Close", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "禁用失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_StockInStyle where HItemID=" + HInterID, "Gy_StockInStyle");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsStop == 0)  //禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已禁用!不能再次禁用！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsStop == 1) //反禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未禁用!不需要反禁用!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsStop == 0)  //禁用判断
                {
                    oCN.RunProc("update Gy_StockInStyle set HStopEmp='" + CurUserName + "',HStopTime=getdate(),HStopflag=1 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "禁用成功";
                    objJsonResult.data = null;
                }
                if (IsStop == 1) //反禁用判断
                {
                    oCN.RunProc("update Gy_StockInStyle set HStopEmp='',HStopTime=null,HStopflag=0 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反禁用成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "禁用失败或者反禁用失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  å‡ºåº“类型  æŸ¥è¯¢,审核，反审核，禁用，反禁用
        /// <summary> 
        /// å‡ºåº“类型  æŸ¥è¯¢
        /// </summary>
        /// <param name="sWhere"></param>
        /// <param name="user"></param>
        /// <returns></returns>
        [Route("Gy_BadReason/Gy_StockOutStyleList")]
        [HttpGet]
        public object Gy_StockOutStyleList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                //查看权限
                if (!DBUtility.ClsPub.Security_Log("Gy_StockOutStyle_Query", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                string sql1 = "select * from  h_v_Gy_StockOutStyle where 1 = 1";
                string sql = sql1 + sWhere + " order by å‡ºåº“类型代码 ";
                ds = oCN.RunProcReturn(sql, "h_v_Gy_StockOutStyle");

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// å‡ºåº“类型 å®¡æ ¸ã€åå®¡æ ¸
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/AuditGy_StockOutStyle")]
        [HttpGet]
        public object AuditGy_StockOutStyle(int HInterID, int IsAudit, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_StockOutStyle_Check", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_StockOutStyle where HItemID=" + HInterID, "Gy_StockOutStyle");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsAudit == 0)  //审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (ds.Tables[0].Rows[0]["HCheckEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsAudit == 0)  //审核判断
                {
                    oCN.RunProc("update Gy_StockOutStyle set HCheckEmp='" + CurUserName + "',HCheckTime=getdate() where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                }
                if (IsAudit == 1) //反审核判断
                {
                    oCN.RunProc("update Gy_StockOutStyle set HCheckEmp='',HCheckTime=null where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }



        /// <summary>
        /// å‡ºåº“类型 ç¦ç”¨ã€åç¦ç”¨
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsStop">禁用(0),反禁用(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Gy_BadReason/StopGy_StockOutStyle")]
        [HttpGet]
        public object StopGy_StockOutStyle(int HInterID, int IsStop, string CurUserName)
        {
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log_second("Gy_StockOutStyle_Close", 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "禁用失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                var ds = oCN.RunProcReturn("select * from Gy_StockOutStyle where HItemID=" + HInterID, "Gy_StockOutStyle");
                if (ds.Tables[0].Rows.Count > 0)
                {
                    if (IsStop == 0)  //禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已禁用!不能再次禁用！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsStop == 1) //反禁用判断
                    {
                        if (ds.Tables[0].Rows[0]["HStopEmp"].ToString() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未禁用!不需要反禁用!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                oCN.BeginTran();

                if (IsStop == 0)  //禁用判断
                {
                    oCN.RunProc("update Gy_StockOutStyle set HStopEmp='" + CurUserName + "',HStopTime=getdate(),HStopflag=1 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "禁用成功";
                    objJsonResult.data = null;
                }
                if (IsStop == 1) //反禁用判断
                {
                    oCN.RunProc("update Gy_StockOutStyle set HStopEmp='',HStopTime=null,HStopflag=0 where HItemID=" + HInterID);

                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反禁用成功";
                    objJsonResult.data = null;
                }
                oCN.Commit();

                return objJsonResult;
            }
            catch (Exception e)
            {
                oCN.RollBack();
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "禁用失败或者反禁用失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region å¼‚常类型  æŸ¥è¯¢
        [Route("Gy_BadReason/Gy_ErrTypeList")]
        [HttpGet]

 WebAPI/Controllers/WebAPIController.cs

@@ -4777,6 +4777,1408 @@
        }
        #endregion


        #region  å²—位技能  è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜å²—位技能
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("SaveGy_PostSkillList")]
        [HttpPost]
        public object SaveGy_PostSkillList([FromBody] JObject msg)
        {
            DataSet ds;
            var _value = msg["msg"].ToString();
            string msg3 = _value.ToString();
            string[] sArray = msg3.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg1 = sArray[0].ToString();
            string msg2 = sArray[1].ToString();

            //查看权限
            if (!DBUtility.ClsPub.Security_Log("Gy_PostSkill_Edit", 1, false, msg2))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无保存权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }

            Int64 HItemID = 0;
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            //获取最大ID值赋值
            DataSet Maxds = oCN.RunProcReturn("select isNull(MAX(HItemID),0) HItemID from Gy_PostSkill ", "Gy_PostSkill");
            if (Maxds != null || Maxds.Tables[0].Rows.Count > 0)
            {
                //HItemID= Maxds.Tables[0].Rows[0]["HItemID"]
                var maxid = Convert.ToInt32(Maxds.Tables[0].Rows[0]["HItemID"]);
                maxid += 1;
                HItemID = maxid;
            }
            ListModels oListModels = new ListModels();
            try
            {
                WebAPI.DLL.ClsGy_PostSkill_Ctl oBill = new WebAPI.DLL.ClsGy_PostSkill_Ctl();
                List<Model.ClsGy_PostSkill_Model> lsmain = new List<Model.ClsGy_PostSkill_Model>();
                msg1 = msg1.Replace("\\", "");
                msg1 = msg1.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_PostSkill(msg1);
                foreach (Model.ClsGy_PostSkill_Model oItem in lsmain)
                {
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (oItem.HName.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！名称不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (!DBUtility.ClsPub.AllowNumber(oItem.HNumber.Trim()))
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码中不能出现连续‘.’并且首位末位不能为‘.’！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //查询数据中是否存在重复代码

                    ds = oCN.RunProcReturn("select * from  Gy_PostSkill where HStopflag=0 and HNumber='" + oItem.HNumber.Trim() + "'", "Gy_PostSkill");
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //新增时判断
                    if (oItem.HItemID == 0)
                    {
                        if (ds == null || ds.Tables[0].Rows.Count == 0)
                        {

                        }
                        else
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "保存失败！代码重复！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    else//编辑时判断
                    {
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), oItem.HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    //得到短代码
                    string sShortNumber;
                    sShortNumber = DBUtility.ClsPub.GetShortNumber(oItem.HNumber.Trim());
                    if (sShortNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！短代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oItem.HShortNumber = sShortNumber;//短代码
                    oItem.HEndFlag = true;//末级标志
                    oItem.HLevel = DBUtility.ClsPub.GetLevel(oItem.HNumber.Trim()); //等级
                    oItem.HMakeEmp = msg2; //创建人

                    oBill.oModel = oItem;
                }

                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.oModel.HItemID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddNew();
                }
                else
                {
                    bResult = oBill.ModifyByID(oBill.oModel.HItemID);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }

        /// <summary>
        /// å²—位技能取信息
        /// </summary>
        /// <returns></returns>
        [Route("GetGy_PostSkillDetail")]
        [HttpGet]
        public ApiResult<DataSet> GetGy_PostSkillDetail(string HID)
        {
            var model = LuBaoSevice.GetGy_PostSkillDetail(HID);
            return model;
        }

        /// <summary>
        /// å²—位技能删除功能
        /// </summary>
        /// <returns></returns>
        [Route("DeltetGy_PostSkill")]
        [HttpGet]
        public object DeltetGy_PostSkill(string HItemID, string user)
        {
            DataSet ds;
            //string ModRightNameCheck = "Sc_ProcessReport_check";
            try
            {
                //删除权限
                if (!DBUtility.ClsPub.Security_Log("Gy_PostSkill_Drop", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (string.IsNullOrWhiteSpace(HItemID))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HItemID为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oCN.BeginTran();//开始事务
                ds = oCN.RunProcReturn("select * from Gy_PostSkill where HItemID=" + HItemID, "Gy_PostSkill");
                if (ds == null || ds.Tables[0].Rows.Count == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有数据，无法删除！";
                    objJsonResult.data = null;
                    return objJsonResult; ;
                }
               

                oCN.RunProc("delete Gy_PostSkill where HItemID=" + HItemID);
                oCN.Commit();//提交事务
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "数据删除成功！";
                objJsonResult.data = null;
                return objJsonResult; ;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "删除失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion


        #region  å²—位 è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜å²—位
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("SaveGy_PostList")]
        [HttpPost]
        public object SaveGy_PostList([FromBody] JObject msg)
        {
            DataSet ds;
            var _value = msg["msg"].ToString();
            string msg3 = _value.ToString();
            string[] sArray = msg3.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg1 = sArray[0].ToString();
            string msg2 = sArray[1].ToString();

            //查看权限
            if (!DBUtility.ClsPub.Security_Log("Gy_Post_Edit", 1, false, msg2))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无保存权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }

            Int64 HItemID = 0;
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            //获取最大ID值赋值
            DataSet Maxds = oCN.RunProcReturn("select isNull(MAX(HItemID),0) HItemID from Gy_Post ", "Gy_Post");
            if (Maxds != null || Maxds.Tables[0].Rows.Count > 0)
            {
                //HItemID= Maxds.Tables[0].Rows[0]["HItemID"]
                var maxid = Convert.ToInt32(Maxds.Tables[0].Rows[0]["HItemID"]);
                maxid += 1;
                HItemID = maxid;
            }
            ListModels oListModels = new ListModels();
            try
            {
                WebAPI.DLL.ClsGy_Post_Ctl oBill = new WebAPI.DLL.ClsGy_Post_Ctl();
                List<Model.ClsGy_Post_Model> lsmain = new List<Model.ClsGy_Post_Model>();
                msg1 = msg1.Replace("\\", "");
                msg1 = msg1.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_Post(msg1);
                foreach (Model.ClsGy_Post_Model oItem in lsmain)
                {
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (oItem.HName.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！名称不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (!DBUtility.ClsPub.AllowNumber(oItem.HNumber.Trim()))
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码中不能出现连续‘.’并且首位末位不能为‘.’！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //查询数据中是否存在重复代码

                    ds = oCN.RunProcReturn("select * from  Gy_Post where HStopflag=0 and HNumber='" + oItem.HNumber.Trim() + "'", "Gy_Post");
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //新增时判断
                    if (oItem.HItemID == 0)
                    {
                        if (ds == null || ds.Tables[0].Rows.Count == 0)
                        {

                        }
                        else
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "保存失败！代码重复！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    else//编辑时判断
                    {
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), oItem.HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    //得到短代码
                    string sShortNumber;
                    sShortNumber = DBUtility.ClsPub.GetShortNumber(oItem.HNumber.Trim());
                    if (sShortNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！短代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oItem.HShortNumber = sShortNumber;//短代码
                    oItem.HEndFlag = true;//末级标志
                    oItem.HLevel = DBUtility.ClsPub.GetLevel(oItem.HNumber.Trim()); //等级
                    oItem.HMakeEmp = msg2; //创建人

                    oBill.oModel = oItem;
                }

                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.oModel.HItemID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddNew();
                }
                else
                {
                    bResult = oBill.ModifyByID(oBill.oModel.HItemID);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }

        /// <summary>
        /// å²—位获取信息
        /// </summary>
        /// <returns></returns>
        [Route("GetGy_PostDetail")]
        [HttpGet]
        public ApiResult<DataSet> GetGy_PostDetail(string HID)
        {
            var model = LuBaoSevice.GetGy_PostDetail(HID);
            return model;
        }

        /// <summary>
        /// å²—位删除功能
        /// </summary>
        /// <returns></returns>
        [Route("DeltetGy_Post")]
        [HttpGet]
        public object DeltetGy_Post(string HItemID, string user)
        {
            DataSet ds;
            //string ModRightNameCheck = "Sc_ProcessReport_check";
            try
            {
                //删除权限
                if (!DBUtility.ClsPub.Security_Log("Gy_Post_Drop", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (string.IsNullOrWhiteSpace(HItemID))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HItemID为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oCN.BeginTran();//开始事务
                ds = oCN.RunProcReturn("select * from Gy_Post where HItemID=" + HItemID, "Gy_Post");
                if (ds == null || ds.Tables[0].Rows.Count == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有数据，无法删除！";
                    objJsonResult.data = null;
                    return objJsonResult; ;
                }


                oCN.RunProc("delete Gy_Post where HItemID=" + HItemID);
                oCN.Commit();//提交事务
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "数据删除成功！";
                objJsonResult.data = null;
                return objJsonResult; ;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "删除失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  è°ƒæ‹¨ç±»åž‹  è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜è°ƒæ‹¨ç±»åž‹
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("SaveGy_StockMoveStyleList")]
        [HttpPost]
        public object SaveGy_StockMoveStyleList([FromBody] JObject msg)
        {
            DataSet ds;
            var _value = msg["msg"].ToString();
            string msg3 = _value.ToString();
            string[] sArray = msg3.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg1 = sArray[0].ToString();
            string msg2 = sArray[1].ToString();

            //查看权限
            if (!DBUtility.ClsPub.Security_Log("Gy_StockMoveStyle_Edit", 1, false, msg2))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无保存权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }

            Int64 HItemID = 0;
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            //获取最大ID值赋值
            DataSet Maxds = oCN.RunProcReturn("select isNull(MAX(HItemID),0) HItemID from Gy_StockMoveStyle ", "Gy_StockMoveStyle");
            if (Maxds != null || Maxds.Tables[0].Rows.Count > 0)
            {
                //HItemID= Maxds.Tables[0].Rows[0]["HItemID"]
                var maxid = Convert.ToInt32(Maxds.Tables[0].Rows[0]["HItemID"]);
                maxid += 1;
                HItemID = maxid;
            }
            ListModels oListModels = new ListModels();
            try
            {
                WebAPI.DLL.ClsGy_StockMoveStyle_Ctl oBill = new WebAPI.DLL.ClsGy_StockMoveStyle_Ctl();
                List<Model.ClsGy_StockMoveStyle_Model> lsmain = new List<Model.ClsGy_StockMoveStyle_Model>();
                msg1 = msg1.Replace("\\", "");
                msg1 = msg1.Replace("\n", "");  
                lsmain = oListModels.getObjectByJson_Gy_StockMoveStyle(msg1);
                foreach (Model.ClsGy_StockMoveStyle_Model oItem in lsmain)
                {
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (oItem.HName.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！名称不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (!DBUtility.ClsPub.AllowNumber(oItem.HNumber.Trim()))
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码中不能出现连续‘.’并且首位末位不能为‘.’！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //查询数据中是否存在重复代码

                    ds = oCN.RunProcReturn("select * from  Gy_StockMoveStyle where HStopflag=0 and HNumber='" + oItem.HNumber.Trim() + "'", "Gy_StockMoveStyle");
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //新增时判断
                    if (oItem.HItemID == 0)
                    {
                        if (ds == null || ds.Tables[0].Rows.Count == 0)
                        {

                        }
                        else
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "保存失败！代码重复！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    else//编辑时判断
                    {
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), oItem.HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    //得到短代码
                    string sShortNumber;
                    sShortNumber = DBUtility.ClsPub.GetShortNumber(oItem.HNumber.Trim());
                    if (sShortNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！短代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oItem.HShortNumber = sShortNumber;//短代码
                    oItem.HEndFlag = true;//末级标志
                    oItem.HLevel = DBUtility.ClsPub.GetLevel(oItem.HNumber.Trim()); //等级
                    oItem.HMakeEmp = msg2; //创建人

                    oBill.oModel = oItem;
                }

                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.oModel.HItemID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddNew();
                }
                else
                {
                    bResult = oBill.ModifyByID(oBill.oModel.HItemID);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }

        /// <summary>
        /// è°ƒæ‹¨ç±»åž‹èŽ·å–信息
        /// </summary>
        /// <returns></returns>
        [Route("GetGy_StockMoveStyleDetail")]
        [HttpGet]
        public ApiResult<DataSet> GetGy_StockMoveStyleDetail(string HID)
        {
            var model = LuBaoSevice.GetGy_StockMoveStyleDetail(HID);
            return model;
        }

        /// <summary>
        /// è°ƒæ‹¨ç±»åž‹åˆ é™¤åŠŸèƒ½
        /// </summary>
        /// <returns></returns>
        [Route("DeltetGy_StockMoveStyle")]
        [HttpGet]
        public object DeltetGy_StockMoveStyle(string HItemID, string user)
        {
            DataSet ds;
            //string ModRightNameCheck = "Sc_ProcessReport_check";
            try
            {
                //删除权限
                if (!DBUtility.ClsPub.Security_Log("Gy_StockMoveStyle_Drop", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (string.IsNullOrWhiteSpace(HItemID))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HItemID为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oCN.BeginTran();//开始事务
                ds = oCN.RunProcReturn("select * from Gy_StockMoveStyle where HItemID=" + HItemID, "Gy_StockMoveStyle");
                if (ds == null || ds.Tables[0].Rows.Count == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有数据，无法删除！";
                    objJsonResult.data = null;
                    return objJsonResult; ;
                }


                oCN.RunProc("delete Gy_StockMoveStyle where HItemID=" + HItemID);
                oCN.Commit();//提交事务
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "数据删除成功！";
                objJsonResult.data = null;
                return objJsonResult; ;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "删除失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  å…¥åº“类型  è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜å…¥åº“类型
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("SaveGy_StockInStyleList")]
        [HttpPost]
        public object SaveGy_StockInStyleList([FromBody] JObject msg)
        {
            DataSet ds;
            var _value = msg["msg"].ToString();
            string msg3 = _value.ToString();
            string[] sArray = msg3.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg1 = sArray[0].ToString();
            string msg2 = sArray[1].ToString();

            //查看权限
            if (!DBUtility.ClsPub.Security_Log("Gy_StockInStyle_Edit", 1, false, msg2))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无保存权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }

            Int64 HItemID = 0;
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            //获取最大ID值赋值
            DataSet Maxds = oCN.RunProcReturn("select isNull(MAX(HItemID),0) HItemID from Gy_StockInStyle ", "Gy_StockInStyle");
            if (Maxds != null || Maxds.Tables[0].Rows.Count > 0)
            {
                //HItemID= Maxds.Tables[0].Rows[0]["HItemID"]
                var maxid = Convert.ToInt32(Maxds.Tables[0].Rows[0]["HItemID"]);
                maxid += 1;
                HItemID = maxid;
            }
            ListModels oListModels = new ListModels();
            try
            {
                WebAPI.DLL.ClsGy_StockInStyle_Ctl oBill = new WebAPI.DLL.ClsGy_StockInStyle_Ctl();
                List<Model.ClsGy_StockInStyle_Model> lsmain = new List<Model.ClsGy_StockInStyle_Model>();
                msg1 = msg1.Replace("\\", "");
                msg1 = msg1.Replace("\n", "");
                lsmain = oListModels.getObjectByJson_Gy_StockInStyle(msg1);
                foreach (Model.ClsGy_StockInStyle_Model oItem in lsmain)
                {
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (oItem.HName.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！名称不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (!DBUtility.ClsPub.AllowNumber(oItem.HNumber.Trim()))
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码中不能出现连续‘.’并且首位末位不能为‘.’！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //查询数据中是否存在重复代码

                    ds = oCN.RunProcReturn("select * from  Gy_StockInStyle where HStopflag=0 and HNumber='" + oItem.HNumber.Trim() + "'", "Gy_StockInStyle");
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //新增时判断
                    if (oItem.HItemID == 0)
                    {
                        if (ds == null || ds.Tables[0].Rows.Count == 0)
                        {

                        }
                        else
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "保存失败！代码重复！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    else//编辑时判断
                    {
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), oItem.HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    //得到短代码
                    string sShortNumber;
                    sShortNumber = DBUtility.ClsPub.GetShortNumber(oItem.HNumber.Trim());
                    if (sShortNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！短代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oItem.HShortNumber = sShortNumber;//短代码
                    oItem.HEndFlag = true;//末级标志
                    oItem.HLevel = DBUtility.ClsPub.GetLevel(oItem.HNumber.Trim()); //等级
                    oItem.HMakeEmp = msg2; //创建人

                    oBill.oModel = oItem;
                }

                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.oModel.HItemID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddNew();
                }
                else
                {
                    bResult = oBill.ModifyByID(oBill.oModel.HItemID);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }

        /// <summary>
        /// å…¥åº“类型获取信息
        /// </summary>
        /// <returns></returns>
        [Route("GetGy_StockInStyleDetail")]
        [HttpGet]
        public ApiResult<DataSet> GetGy_StockInStyleDetail(string HID)
        {
            var model = LuBaoSevice.GetGy_StockInStyleDetail(HID);
            return model;
        }

        /// <summary>
        /// å…¥åº“类型删除功能
        /// </summary>
        /// <returns></returns>
        [Route("DeltetGy_StockInStyle")]
        [HttpGet]
        public object DeltetGy_StockInStyle(string HItemID, string user)
        {
            DataSet ds;
            //string ModRightNameCheck = "Sc_ProcessReport_check";
            try
            {
                //删除权限
                if (!DBUtility.ClsPub.Security_Log("Gy_StockInStyle_Drop", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (string.IsNullOrWhiteSpace(HItemID))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HItemID为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oCN.BeginTran();//开始事务
                ds = oCN.RunProcReturn("select * from Gy_StockInStyle where HItemID=" + HItemID, "Gy_StockInStyle");
                if (ds == null || ds.Tables[0].Rows.Count == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有数据，无法删除！";
                    objJsonResult.data = null;
                    return objJsonResult; ;
                }


                oCN.RunProc("delete Gy_StockInStyle where HItemID=" + HItemID);
                oCN.Commit();//提交事务
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "数据删除成功！";
                objJsonResult.data = null;
                return objJsonResult; ;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "删除失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region  å‡ºåº“类型  è®¾ç½®åˆ—表/保存/编辑/删除方法
        /// <summary>
        /// ä¿å­˜å‡ºåº“类型
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("SaveGy_StockOutStyleList")]
        [HttpPost]
        public object SaveGy_StockOutStyleList([FromBody] JObject msg)
        {
            DataSet ds;
            var _value = msg["msg"].ToString();
            string msg3 = _value.ToString();
            string[] sArray = msg3.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg1 = sArray[0].ToString();
            string msg2 = sArray[1].ToString();

            //查看权限
            if (!DBUtility.ClsPub.Security_Log("Gy_StockOutStyle_Edit", 1, false, msg2))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无保存权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }

            Int64 HItemID = 0;
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            //获取最大ID值赋值
            DataSet Maxds = oCN.RunProcReturn("select isNull(MAX(HItemID),0) HItemID from Gy_StockOutStyle ", "Gy_StockOutStyle");
            if (Maxds != null || Maxds.Tables[0].Rows.Count > 0)
            {
                //HItemID= Maxds.Tables[0].Rows[0]["HItemID"]
                var maxid = Convert.ToInt32(Maxds.Tables[0].Rows[0]["HItemID"]);
                maxid += 1;
                HItemID = maxid;
            }
            ListModels oListModels = new ListModels();
            try
            {
                WebAPI.DLL.ClsGy_StockOutStyle_Ctl oBill = new WebAPI.DLL.ClsGy_StockOutStyle_Ctl();
                List<Model.ClsGy_StockOutStyle_Model> lsmain = new List<Model.ClsGy_StockOutStyle_Model>();
                msg1 = msg1.Replace("\\", "");
                msg1 = msg1.Replace("\n", "");
                lsmain = oListModels.getObjectByJson_Gy_StockOutStyle(msg1);
                foreach (Model.ClsGy_StockOutStyle_Model oItem in lsmain)
                {
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (oItem.HName.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！名称不能为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    if (!DBUtility.ClsPub.AllowNumber(oItem.HNumber.Trim()))
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码中不能出现连续‘.’并且首位末位不能为‘.’！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //查询数据中是否存在重复代码

                    ds = oCN.RunProcReturn("select * from  Gy_StockOutStyle where HStopflag=0 and HNumber='" + oItem.HNumber.Trim() + "'", "Gy_StockOutStyle");
                    if (oItem.HNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    //新增时判断
                    if (oItem.HItemID == 0)
                    {
                        if (ds == null || ds.Tables[0].Rows.Count == 0)
                        {

                        }
                        else
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "保存失败！代码重复！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    else//编辑时判断
                    {
                        //检查父级是否存在
                        string sParent;
                        sParent = DBUtility.ClsPub.GetParentCode(oItem.HNumber.Trim());
                        if (sParent.Trim() == "")
                        {
                            oBill.oModel.HParentID = 0;
                        }
                        else
                        {
                            if (oBill.HavParentCode(sParent.Trim(), oItem.HItemID))
                            {
                                oBill.oModel.HParentID = oBill.oModel.HItemID;
                            }
                            else
                            {
                                objJsonResult.code = "0";
                                objJsonResult.count = 0;
                                objJsonResult.Message = "保存失败！上级代码不存在或被禁用！";
                                objJsonResult.data = 1;
                                return objJsonResult;
                            }
                        }
                    }
                    //得到短代码
                    string sShortNumber;
                    sShortNumber = DBUtility.ClsPub.GetShortNumber(oItem.HNumber.Trim());
                    if (sShortNumber.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！短代码为空！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oItem.HShortNumber = sShortNumber;//短代码
                    oItem.HEndFlag = true;//末级标志
                    oItem.HLevel = DBUtility.ClsPub.GetLevel(oItem.HNumber.Trim()); //等级
                    oItem.HMakeEmp = msg2; //创建人

                    oBill.oModel = oItem;
                }

                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.oModel.HItemID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddNew();
                }
                else
                {
                    bResult = oBill.ModifyByID(oBill.oModel.HItemID);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }

        /// <summary>
        /// å…¥åº“类型获取信息
        /// </summary>
        /// <returns></returns>
        [Route("GetGy_StockOutStyleDetail")]
        [HttpGet]
        public ApiResult<DataSet> GetGy_StockOutStyleDetail(string HID)
        {
            var model = LuBaoSevice.GetGy_StockOutStyleDetail(HID);
            return model;
        }

        /// <summary>
        /// å‡ºåº“类型删除功能
        /// </summary>
        /// <returns></returns>
        [Route("DeltetGy_StockOutStyle")]
        [HttpGet]
        public object DeltetGy_StockOutStyle(string HItemID, string user)
        {
            DataSet ds;
            //string ModRightNameCheck = "Sc_ProcessReport_check";
            try
            {
                //删除权限
                if (!DBUtility.ClsPub.Security_Log("Gy_StockOutStyle_Drop", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (string.IsNullOrWhiteSpace(HItemID))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HItemID为空！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                oCN.BeginTran();//开始事务
                ds = oCN.RunProcReturn("select * from Gy_StockOutStyle where HItemID=" + HItemID, "Gy_StockOutStyle");
                if (ds == null || ds.Tables[0].Rows.Count == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有数据，无法删除！";
                    objJsonResult.data = null;
                    return objJsonResult; ;
                }


                oCN.RunProc("delete Gy_StockOutStyle where HItemID=" + HItemID);
                oCN.Commit();//提交事务
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "数据删除成功！";
                objJsonResult.data = null;
                return objJsonResult; ;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "删除失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        /// <summary>
        /// ç”¨å…³è”工序获取信息
        /// </summary>

 WebAPI/DLL/ClsGy_PostSkill_Ctl.cs

New file
@@ -0,0 +1,101 @@
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;

namespace WebAPI.DLL
{
    public class ClsGy_PostSkill_Ctl : DBUtility.ClsGy_Base_Ctl   
    {
        SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
        //原代码 ç”¨äºŽ æ›¿æ¢å­é¡¹ç›®
        public string HOldNumber;
        public Model.ClsGy_PostSkill_Model oModel = new Model.ClsGy_PostSkill_Model();
        //新增
        public override bool AddNew()
        {
            //
            try
            {
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID,HERPItemID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "','" + 0 + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }

        //修改
        public override bool ModifyByID(Int64 sItemID)
        {
            try
            {
                
                oCn.BeginTran();
                oCn.RunProc("Update " + MvarItemKey + " set " +
                    " HNumber='" + oModel.HNumber + "'" +
                    ",HName='" + oModel.HName + "'" +
                    ",HShortNumber='" + oModel.HShortNumber + "'" +
                    ",HHelpCode='" + oModel.HHelpCode + "'" +
                    ",HModifyTime='" + DateTime.Now + "'" +   
                    ",HUSEORGID='" + oModel.HUSEORGID + "'" +
                    ",HModifyEmp ='" + oModel.HMakeEmp + "'" +
                    ",HUseFlag='" + oModel.HUseFlag + "'" +
                    ",HStopflag=" + Convert.ToString(oModel.HStopflag ? 1 : 0) +
                    ",HRemark= '" + oModel.HRemark + "' Where HItemID=" + sItemID, ref DBUtility.ClsPub.sExeReturnInfo);
                //修改子项目代码
                oCn.RunProc("exec h_p_Gy_UpdateNumber '" + MvarItemKey + "','" + oModel.HNumber + ".','" + this.HOldNumber + ".'", ref DBUtility.ClsPub.sExeReturnInfo);
                //将上级 ä¸ºéžæœ«çº§
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                //
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }
        //根据代码判断信息
        public override bool HavParentCode(string sCode, Int64 sItemID)
        {
            DataSet DS;
            try
            {
                DS = oCn.RunProcReturn("Select * from " + MvarItemKey + " Where HStopflag=0 and HNumber='" + sCode + "' and HItemID<>" + sItemID, MvarItemKey, ref Pub_Class.ClsPub.sExeReturnInfo);
                if (DS.Tables[0].Rows.Count == 0)
                    return false;
                else
                {
                    oModel.HItemID = Convert.ToInt64(DS.Tables[0].Rows[0]["HItemID"]);
                    return true;
                }
            }
            catch (Exception e)
            {
                throw (e);
            }
        }
        //构造函数
        public ClsGy_PostSkill_Ctl()
        {
            MvarItemKey = "Gy_PostSkill";
            MvarReportTitle = "岗位技能设置";
            oModel = new Model.ClsGy_PostSkill_Model();
        }

    

    }
}

 WebAPI/DLL/ClsGy_Post_Ctl.cs

New file
@@ -0,0 +1,101 @@
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;

namespace WebAPI.DLL
{
    public class ClsGy_Post_Ctl : DBUtility.ClsGy_Base_Ctl   
    {
        SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
        //原代码 ç”¨äºŽ æ›¿æ¢å­é¡¹ç›®
        public string HOldNumber;
        public Model.ClsGy_Post_Model oModel = new Model.ClsGy_Post_Model();
        //新增
        public override bool AddNew()
        {
            //
            try
            {
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }

        //修改
        public override bool ModifyByID(Int64 sItemID)
        {
            try
            {
                
                oCn.BeginTran();
                oCn.RunProc("Update " + MvarItemKey + " set " +
                    " HNumber='" + oModel.HNumber + "'" +
                    ",HName='" + oModel.HName + "'" +
                    ",HShortNumber='" + oModel.HShortNumber + "'" +
                    ",HHelpCode='" + oModel.HHelpCode + "'" +
                    ",HModifyTime='" + DateTime.Now + "'" +   
                    ",HUSEORGID='" + oModel.HUSEORGID + "'" +
                    ",HModifyEmp ='" + oModel.HMakeEmp + "'" +
                    ",HUseFlag='" + oModel.HUseFlag + "'" +
                    ",HStopflag=" + Convert.ToString(oModel.HStopflag ? 1 : 0) +
                    ",HRemark= '" + oModel.HRemark + "' Where HItemID=" + sItemID, ref DBUtility.ClsPub.sExeReturnInfo);
                //修改子项目代码
                oCn.RunProc("exec h_p_Gy_UpdateNumber '" + MvarItemKey + "','" + oModel.HNumber + ".','" + this.HOldNumber + ".'", ref DBUtility.ClsPub.sExeReturnInfo);
                //将上级 ä¸ºéžæœ«çº§
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                //
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }
        //根据代码判断信息
        public override bool HavParentCode(string sCode, Int64 sItemID)
        {
            DataSet DS;
            try
            {
                DS = oCn.RunProcReturn("Select * from " + MvarItemKey + " Where HStopflag=0 and HNumber='" + sCode + "' and HItemID<>" + sItemID, MvarItemKey, ref Pub_Class.ClsPub.sExeReturnInfo);
                if (DS.Tables[0].Rows.Count == 0)
                    return false;
                else
                {
                    oModel.HItemID = Convert.ToInt64(DS.Tables[0].Rows[0]["HItemID"]);
                    return true;
                }
            }
            catch (Exception e)
            {
                throw (e);
            }
        }
        //构造函数
        public ClsGy_Post_Ctl()
        {
            MvarItemKey = "Gy_Post";
            MvarReportTitle = "岗位设置";
            oModel = new Model.ClsGy_Post_Model();
        }

    

    }
}

 WebAPI/DLL/ClsGy_StockInStyle_Ctl.cs

New file
@@ -0,0 +1,101 @@
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;

namespace WebAPI.DLL
{
    public class ClsGy_StockInStyle_Ctl : DBUtility.ClsGy_Base_Ctl   
    {
        SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
        //原代码 ç”¨äºŽ æ›¿æ¢å­é¡¹ç›®
        public string HOldNumber;
        public Model.ClsGy_StockInStyle_Model oModel = new Model.ClsGy_StockInStyle_Model();
        //新增
        public override bool AddNew()
        {
            //
            try
            {
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }

        //修改
        public override bool ModifyByID(Int64 sItemID)
        {
            try
            {
                
                oCn.BeginTran();
                oCn.RunProc("Update " + MvarItemKey + " set " +
                    " HNumber='" + oModel.HNumber + "'" +
                    ",HName='" + oModel.HName + "'" +
                    ",HShortNumber='" + oModel.HShortNumber + "'" +
                    ",HHelpCode='" + oModel.HHelpCode + "'" +
                    ",HModifyTime='" + DateTime.Now + "'" +   
                    ",HUSEORGID='" + oModel.HUSEORGID + "'" +
                    ",HModifyEmp ='" + oModel.HMakeEmp + "'" +
                    ",HUseFlag='" + oModel.HUseFlag + "'" +
                    ",HStopflag=" + Convert.ToString(oModel.HStopflag ? 1 : 0) +
                    ",HRemark= '" + oModel.HRemark + "' Where HItemID=" + sItemID, ref DBUtility.ClsPub.sExeReturnInfo);
                //修改子项目代码
                oCn.RunProc("exec h_p_Gy_UpdateNumber '" + MvarItemKey + "','" + oModel.HNumber + ".','" + this.HOldNumber + ".'", ref DBUtility.ClsPub.sExeReturnInfo);
                //将上级 ä¸ºéžæœ«çº§
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                //
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }
        //根据代码判断信息
        public override bool HavParentCode(string sCode, Int64 sItemID)
        {
            DataSet DS;
            try
            {
                DS = oCn.RunProcReturn("Select * from " + MvarItemKey + " Where HStopflag=0 and HNumber='" + sCode + "' and HItemID<>" + sItemID, MvarItemKey, ref Pub_Class.ClsPub.sExeReturnInfo);
                if (DS.Tables[0].Rows.Count == 0)
                    return false;
                else
                {
                    oModel.HItemID = Convert.ToInt64(DS.Tables[0].Rows[0]["HItemID"]);
                    return true;
                }
            }
            catch (Exception e)
            {
                throw (e);
            }
        }
        //构造函数
        public ClsGy_StockInStyle_Ctl()
        {
            MvarItemKey = "Gy_StockInStyle";
            MvarReportTitle = "入库类型设置";
            oModel = new Model.ClsGy_StockInStyle_Model();
        }

    

    }
}

 WebAPI/DLL/ClsGy_StockMoveStyle_Ctl.cs

New file
@@ -0,0 +1,101 @@
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;

namespace WebAPI.DLL
{
    public class ClsGy_StockMoveStyle_Ctl : DBUtility.ClsGy_Base_Ctl   
    {
        SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
        //原代码 ç”¨äºŽ æ›¿æ¢å­é¡¹ç›®
        public string HOldNumber;
        public Model.ClsGy_StockMoveStyle_Model oModel = new Model.ClsGy_StockMoveStyle_Model();
        //新增
        public override bool AddNew()
        {
            //
            try
            {
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID,HERPItemID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "','" + 0 + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }

        //修改
        public override bool ModifyByID(Int64 sItemID)
        {
            try
            {
                
                oCn.BeginTran();
                oCn.RunProc("Update " + MvarItemKey + " set " +
                    " HNumber='" + oModel.HNumber + "'" +
                    ",HName='" + oModel.HName + "'" +
                    ",HShortNumber='" + oModel.HShortNumber + "'" +
                    ",HHelpCode='" + oModel.HHelpCode + "'" +
                    ",HModifyTime='" + DateTime.Now + "'" +   
                    ",HUSEORGID='" + oModel.HUSEORGID + "'" +
                    ",HModifyEmp ='" + oModel.HMakeEmp + "'" +
                    ",HUseFlag='" + oModel.HUseFlag + "'" +
                    ",HStopflag=" + Convert.ToString(oModel.HStopflag ? 1 : 0) +
                    ",HRemark= '" + oModel.HRemark + "' Where HItemID=" + sItemID, ref DBUtility.ClsPub.sExeReturnInfo);
                //修改子项目代码
                oCn.RunProc("exec h_p_Gy_UpdateNumber '" + MvarItemKey + "','" + oModel.HNumber + ".','" + this.HOldNumber + ".'", ref DBUtility.ClsPub.sExeReturnInfo);
                //将上级 ä¸ºéžæœ«çº§
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                //
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }
        //根据代码判断信息
        public override bool HavParentCode(string sCode, Int64 sItemID)
        {
            DataSet DS;
            try
            {
                DS = oCn.RunProcReturn("Select * from " + MvarItemKey + " Where HStopflag=0 and HNumber='" + sCode + "' and HItemID<>" + sItemID, MvarItemKey, ref Pub_Class.ClsPub.sExeReturnInfo);
                if (DS.Tables[0].Rows.Count == 0)
                    return false;
                else
                {
                    oModel.HItemID = Convert.ToInt64(DS.Tables[0].Rows[0]["HItemID"]);
                    return true;
                }
            }
            catch (Exception e)
            {
                throw (e);
            }
        }
        //构造函数
        public ClsGy_StockMoveStyle_Ctl()
        {
            MvarItemKey = "Gy_StockMoveStyle";
            MvarReportTitle = "调拨类型设置";
            oModel = new Model.ClsGy_StockMoveStyle_Model();
        }

    

    }
}

 WebAPI/DLL/ClsGy_StockOutStyle_Ctl.cs

New file
@@ -0,0 +1,101 @@
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;

namespace WebAPI.DLL
{
    public class ClsGy_StockOutStyle_Ctl : DBUtility.ClsGy_Base_Ctl   
    {
        SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
        //原代码 ç”¨äºŽ æ›¿æ¢å­é¡¹ç›®
        public string HOldNumber;
        public Model.ClsGy_StockOutStyle_Model oModel = new Model.ClsGy_StockOutStyle_Model();
        //新增
        public override bool AddNew()
        {
            //
            try
            {
                oCn.BeginTran();
                oCn.RunProc("Insert into " + MvarItemKey + " " +
                    " (HNumber,HName,HHelpCode,HShortNumber,HParentID" +
                    ",HLevel,HEndFlag,HStopflag,HRemark,HMakeTime,HUSEORGID,HUseFlag,HMakeEmp,HCREATEORGID) " +
                    " Values('" + oModel.HNumber + "','" + oModel.HName + "','" + oModel.HHelpCode + "','" + oModel.HShortNumber + "'," + oModel.HParentID.ToString() +
                    "," + oModel.HLevel.ToString() + "," + Convert.ToString(oModel.HEndFlag ? 1 : 0) + "," + Convert.ToString(oModel.HStopflag ? 1 : 0) + ",'" + oModel.HRemark + "','" +DateTime.Now+ "','" + oModel.HUSEORGID + "','" + oModel.HUseFlag + "','" + oModel.HMakeEmp+ "','" + oModel.HUSEORGID + "')", ref DBUtility.ClsPub.sExeReturnInfo);
                //修改上级为非末级代码
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }

        //修改
        public override bool ModifyByID(Int64 sItemID)
        {
            try
            {
                
                oCn.BeginTran();
                oCn.RunProc("Update " + MvarItemKey + " set " +
                    " HNumber='" + oModel.HNumber + "'" +
                    ",HName='" + oModel.HName + "'" +
                    ",HShortNumber='" + oModel.HShortNumber + "'" +
                    ",HHelpCode='" + oModel.HHelpCode + "'" +
                    ",HModifyTime='" + DateTime.Now + "'" +   
                    ",HUSEORGID='" + oModel.HUSEORGID + "'" +
                    ",HModifyEmp ='" + oModel.HMakeEmp + "'" +
                    ",HUseFlag='" + oModel.HUseFlag + "'" +
                    ",HStopflag=" + Convert.ToString(oModel.HStopflag ? 1 : 0) +
                    ",HRemark= '" + oModel.HRemark + "' Where HItemID=" + sItemID, ref DBUtility.ClsPub.sExeReturnInfo);
                //修改子项目代码
                oCn.RunProc("exec h_p_Gy_UpdateNumber '" + MvarItemKey + "','" + oModel.HNumber + ".','" + this.HOldNumber + ".'", ref DBUtility.ClsPub.sExeReturnInfo);
                //将上级 ä¸ºéžæœ«çº§
                oCn.RunProc("Update " + MvarItemKey + " set HEndflag=0 where HItemID=" + oModel.HParentID, ref DBUtility.ClsPub.sExeReturnInfo);
                //
                oCn.Commit();
                return true;
            }
            catch (Exception e)
            {
                oCn.RollBack();
                throw (e);
            }
        }
        //根据代码判断信息
        public override bool HavParentCode(string sCode, Int64 sItemID)
        {
            DataSet DS;
            try
            {
                DS = oCn.RunProcReturn("Select * from " + MvarItemKey + " Where HStopflag=0 and HNumber='" + sCode + "' and HItemID<>" + sItemID, MvarItemKey, ref Pub_Class.ClsPub.sExeReturnInfo);
                if (DS.Tables[0].Rows.Count == 0)
                    return false;
                else
                {
                    oModel.HItemID = Convert.ToInt64(DS.Tables[0].Rows[0]["HItemID"]);
                    return true;
                }
            }
            catch (Exception e)
            {
                throw (e);
            }
        }
        //构造函数
        public ClsGy_StockOutStyle_Ctl()
        {
            MvarItemKey = "Gy_StockOutStyle";
            MvarReportTitle = "出库类型设置";
            oModel = new Model.ClsGy_StockOutStyle_Model();
        }

    

    }
}

 WebAPI/ListModels.cs

@@ -802,6 +802,67 @@
        }

        /// <summary>
        /// å¤„理新增岗位技能表的json
        /// </summary>
        /// <param name="jsonString"></param>
        /// <returns></returns>
        public List<Model.ClsGy_PostSkill_Model> getObjectByJson_Gy_PostSkill(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_PostSkill_Model> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_PostSkill_Model>>(jsonString);
            return list;
        }

        /// <summary>  
        /// å¤„理新增岗位表的json
        /// </summary>
        /// <param name="jsonString"></param>
        /// <returns></returns>
        public List<Model.ClsGy_Post_Model> getObjectByJson_Gy_Post(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_Post_Model> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_Post_Model>>(jsonString);
            return list;
        }

        /// <summary>  
        /// å¤„理新增调拨类型表的json
        /// </summary>
        /// <param name="jsonString"></param>
        /// <returns></returns>
        public List<Model.ClsGy_StockMoveStyle_Model> getObjectByJson_Gy_StockMoveStyle(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_StockMoveStyle_Model> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_StockMoveStyle_Model>>(jsonString);
            return list;
        }

        /// <summary>  
        /// å¤„理新增入库类型表的json
        /// </summary>
        /// <param name="jsonString"></param>
        /// <returns></returns>
        public List<Model.ClsGy_StockInStyle_Model> getObjectByJson_Gy_StockInStyle(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_StockInStyle_Model> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_StockInStyle_Model>>(jsonString);
            return list;
        }


        /// <summary>  
        /// å¤„理新增出库类型表的json
        /// </summary>
        /// <param name="jsonString"></param>
        /// <returns></returns>
        public List<Model.ClsGy_StockOutStyle_Model> getObjectByJson_Gy_StockOutStyle(string jsonString)
        {
            jsonString = "[" + jsonString.ToString() + "]";
            List<Model.ClsGy_StockOutStyle_Model> list = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsGy_StockOutStyle_Model>>(jsonString);
            return list;
        }

        /// <summary>
        /// å¤„理新增异常类型表的json
        /// </summary>
        /// <param name="jsonString"></param>

 WebAPI/Service/LuBaoSevice.cs

@@ -331,6 +331,102 @@
        }

        /// <summary>
        /// å²—位技能根据id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_PostSkillDetail(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            var dataSet = GetGy_PostSkillDb(HID);
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在岗位技能数据" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        public static DataSet GetGy_PostSkillDb(string HID)
        {
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Gy_PostSkill  where HItemID= " + HID + " ", "h_v_Gy_PostSkill");
            return dataSet;
        }

        /// <summary>
        /// å²—位根据id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_PostDetail(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            var dataSet = GetGy_PostDb(HID);
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在岗位数据" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        public static DataSet GetGy_PostDb(string HID)
        {
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Gy_Post  where HItemID= " + HID + " ", "h_v_Gy_Post");
            return dataSet;
        }

        /// <summary>
        ///调拨类型根据id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_StockMoveStyleDetail(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            var dataSet = GetGy_StockMoveStyleDb(HID);
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在调拨类型数据" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        public static DataSet GetGy_StockMoveStyleDb(string HID)
        {
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Gy_StockMoveStyle  where HItemID= " + HID + " ", "h_v_Gy_StockMoveStyle");
            return dataSet;
        }


        /// <summary>
        ///入库类型根据id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_StockInStyleDetail(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            var dataSet = GetGy_StockInStyleDb(HID);
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在入库类型数据" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        public static DataSet GetGy_StockInStyleDb(string HID)
        {
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Gy_StockInStyle  where HItemID= " + HID + " ", "h_v_Gy_StockInStyle");
            return dataSet;
        }

        /// <summary>
        ///出库类型根据id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_StockOutStyleDetail(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            var dataSet = GetGy_StockOutStyleDb(HID);
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在出库类型数据" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        public static DataSet GetGy_StockOutStyleDb(string HID)
        {
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Gy_StockOutStyle  where HItemID= " + HID + " ", "h_v_Gy_StockOutStyle");
            return dataSet;
        }

        /// <summary>
        /// è®¡é‡å•ä½æ ¹æ®id获取信息
        /// </summary>
        public static ApiResult<DataSet> GetGy_UnitBillDetail(string HID)

 WebAPI/WebAPI.csproj

@@ -619,6 +619,11 @@
    <Compile Include="DbUntil\DataFormatUntil.cs" />
    <Compile Include="DLL\ClsGy_InspectInstruMent_Ctl.cs" />
    <Compile Include="DLL\ClsGy_InspectBasis_Ctl.cs" />
    <Compile Include="DLL\ClsGy_PostSkill_Ctl.cs" />
    <Compile Include="DLL\ClsGy_StockOutStyle_Ctl.cs" />
    <Compile Include="DLL\ClsGy_StockInStyle_Ctl.cs" />
    <Compile Include="DLL\ClsGy_StockMoveStyle_Ctl.cs" />
    <Compile Include="DLL\ClsGy_Post_Ctl.cs" />
    <Compile Include="DLL\ClsGy_QualityStd_Ctl.cs" />
    <Compile Include="DLL\ClsGy_InspectMethod_Ctl.cs" />
    <Compile Include="DLL\ClsGy_InspectValue_Ctl.cs" />