0

沈泽

2021-10-22 f7c4ceeb654db44722c9362af3e9b70c9d231a3d

 WebAPI/Controllers/Sc_MouldRepairInBillListController - .cs

@@ -71,7 +71,7 @@

        public static DataSet Sc_CheckToolsRepairWorkBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsRepairWorkBillList ", "h_v_Sc_CheckToolsRepairWorkBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsRepairWorkBillList order by 日期 desc", "h_v_Sc_CheckToolsRepairWorkBillList");
        }


@@ -123,7 +123,7 @@

        public static DataSet Sc_CheckToolsDotCheckPlanBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsDotCheckPlanBillList ", "h_v_Sc_CheckToolsDotCheckPlanBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsDotCheckPlanBillList order by 日期 desc", "h_v_Sc_CheckToolsDotCheckPlanBillList");
        }
        #endregion

@@ -171,7 +171,7 @@

        public static DataSet Sc_CheckToolsMaintainBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsMaintainBillList ", "h_v_Sc_CheckToolsMaintainBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsMaintainBillList order by 日期 desc", "h_v_Sc_CheckToolsMaintainBillList");
        }
        #endregion

@@ -221,12 +221,12 @@
        {
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select *  from h_v_Sc_MouldMaintain", "h_v_Sc_MouldMaintain");
                return new SQLHelper.ClsCN().RunProcReturn("select *  from h_v_Sc_MouldMaintain order by 日期 desc", "h_v_Sc_MouldMaintain");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldMaintain where 1 = 1 ";
                string sql = sql1 + sWhere;
                string sql = sql1 + sWhere+ "order by 日期 desc";
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldMaintain");
              
            }
@@ -280,7 +280,7 @@

        public static DataSet Sc_MouldDotCheckPlanBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldDotCheckPlanBillList ", "h_v_Sc_MouldDotCheckPlanBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldDotCheckPlanBillList order by 日期 desc", "h_v_Sc_MouldDotCheckPlanBillList");
        }
        #endregion

@@ -328,7 +328,7 @@

        public static DataSet Sc_MouldDotCheckBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldDotCheckBillList where 1=1 "+sWhere+" ", "h_v_Sc_MouldDotCheckBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldDotCheckBillList where 1=1 "+sWhere+ "order by 日期 desc", "h_v_Sc_MouldDotCheckBillList");
        }
        #endregion

@@ -377,7 +377,7 @@

        public static DataSet Sc_CheckToolsMaintainPlanBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsMaintainPlanBillList ", "h_v_Sc_CheckToolsMaintainPlanBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsMaintainPlanBillList order by 日期 desc", "h_v_Sc_CheckToolsMaintainPlanBillList");
        }
        #endregion

@@ -426,7 +426,7 @@

        public static DataSet Sc_MouldMaintainPlanBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldMaintainPlanBillList ", "h_v_Sc_MouldMaintainPlanBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldMaintainPlanBillList order by 日期 desc", "h_v_Sc_MouldMaintainPlanBillList");
        }
        #endregion

@@ -467,12 +467,12 @@
            DataSet ds;
            if (sWhere == null || sWhere.Equals(""))
            {
               ds = new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldConkBookBillList " + sWhere, "h_v_Sc_MouldConkBookBillList");
               ds = new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldConkBookBillList order by 日期 desc" + sWhere, "h_v_Sc_MouldConkBookBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldConkBookBillList where 1 = 1 ";
                string sql = sql1 + sWhere;
                string sql = sql1 + sWhere+ "order by 日期 desc";
                ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldConkBookBillList");
            }
            return ds;
@@ -517,12 +517,12 @@
            DataSet ds;
            if (sWhere == null || sWhere.Equals(""))
            {
                ds = new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairCheckBillList_Edit " + sWhere, "h_v_Sc_MouldRepairCheckBillList_Edit");
                ds = new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairCheckBillList_Edit order by 日期 desc" + sWhere, "h_v_Sc_MouldRepairCheckBillList_Edit");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldRepairCheckBillList_Edit where 1 = 1 ";
                string sql = sql1 + sWhere;
                string sql = sql1 + sWhere+ "order by 日期 desc";
                ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairCheckBillList_Edit");
            }
            return ds;
@@ -573,7 +573,7 @@

        public static DataSet Sc_CheckToolsRepairCheckBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsRepairCheckBillList ", "h_v_Sc_CheckToolsRepairCheckBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsRepairCheckBillList order by 日期 desc", "h_v_Sc_CheckToolsRepairCheckBillList");
        }
        #endregion

@@ -633,12 +633,12 @@
        {
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList " + sWhere, "h_v_Sc_MouldRepairWorkBillList");
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList order by 日期 desc" + sWhere, "h_v_Sc_MouldRepairWorkBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList where 1 = 1 ";
                string sql = sql1 + sWhere;
                string sql = sql1 + sWhere+ "order by 日期 desc";
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList");
            }
        }
@@ -689,7 +689,7 @@

        public static DataSet Sc_CheckToolsConkBookBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsConkBookBillList ", "h_v_Sc_CheckToolsConkBookBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsConkBookBillList order by 日期 desc", "h_v_Sc_CheckToolsConkBookBillList");
        }
        #endregion

@@ -738,7 +738,7 @@

        public static DataSet Sc_CheckToolsDotCheckBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsDotCheckBillList ", "h_v_Sc_CheckToolsDotCheckBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsDotCheckBillList order by 日期 desc", "h_v_Sc_CheckToolsDotCheckBillList");
        }
        #endregion

@@ -787,7 +787,7 @@

        public static DataSet Sc_GetMoveStockBillList(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_MoveStockBillList ", "h_v_IF_MoveStockBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_MoveStockBillList order by 日期 desc", "h_v_IF_MoveStockBillList");
        }
        #endregion

@@ -835,7 +835,7 @@

        public static DataSet Sc_GetMateOutBillList(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_MateOutBillList ", "h_v_IF_MateOutBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_MateOutBillList order by 日期 desc", "h_v_IF_MateOutBillList");
        }
        #endregion

@@ -884,7 +884,7 @@

        public static DataSet Sc_GetSellOutBillList(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_SellOutBillList ", "h_v_IF_SellOutBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_SellOutBillList order by 日期 desc", "h_v_IF_SellOutBillList");
        }
        #endregion

@@ -933,7 +933,7 @@

        public static DataSet Sc_GetOtherOutBillList(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Kf_OtherOutBillList ", "h_v_Kf_OtherOutBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Kf_OtherOutBillList order by 日期 desc", "h_v_Kf_OtherOutBillList");
        }
        #endregion

@@ -1031,7 +1031,7 @@

        public static DataSet Sc_GetPOStockInBill(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_POStockInBillList ", "h_v_IF_POStockInBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_POStockInBillList order by 日期 desc", "h_v_IF_POStockInBillList");
        }
        #endregion

@@ -1081,7 +1081,7 @@

        public static DataSet Sc_GetProductInBill(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_ProductInBillList ", "h_v_IF_ProductInBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_ProductInBillList order by 日期 desc", "h_v_IF_ProductInBillList");
        }
        #endregion

@@ -1130,7 +1130,7 @@

        public static DataSet Sc_GetOtherInBill(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Kf_OtherInBillList ", "h_v_Kf_OtherInBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Kf_OtherInBillList order by 日期 desc ", "h_v_Kf_OtherInBillList");
        }
        #endregion

@@ -3377,7 +3377,7 @@
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,HPropertyID,辅助属性代码 HPropertyCode,辅助属性名称 HPropertyName,
                                            HSecUnitID, 辅助计量单位代码 HSecUnitCode, 辅助计量单位名称 HSecUnitName, HUnitID, 计量单位代码 HUnitCode, 计量单位名称 HUnitName, 批次 HBatchNo,
                                            设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife, 实收数量 HQty, 单价 HPrice, 金额 HMoney, HWHID, 收料仓库代码 HWHCode, 收料仓库名称 HWHName,
                                            HSPID, 仓位代码 HSPCode, 仓位名称 HSPName, 备注 HRemark
                                            HSPID, 仓位代码 HSPCode, 仓位名称 HSPName, 备注 HRemark,HStockOrgID
                                            FROM h_v_Sc_MouldScrapInHouseBillList"), "h_v_Sc_MouldScrapInHouseBillList");

                    objJsonResult.code = "0";
@@ -3392,7 +3392,7 @@
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,HPropertyID,辅助属性代码 HPropertyCode,辅助属性名称 HPropertyName,
                                            HSecUnitID, 辅助计量单位代码 HSecUnitCode, 辅助计量单位名称 HSecUnitName, HUnitID, 计量单位代码 HUnitCode, 计量单位名称 HUnitName, 批次 HBatchNo,
                                            设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife, 实收数量 HQty, 单价 HPrice, 金额 HMoney, HWHID, 收料仓库代码 HWHCode, 收料仓库名称 HWHName,
                                            HSPID, 仓位代码 HSPCode, 仓位名称 HSPName, 备注 HRemark
                                            HSPID, 仓位代码 HSPCode, 仓位名称 HSPName, 备注 HRemark,HStockOrgID
                                            FROM h_v_Sc_MouldScrapInHouseBillList where 1 = 1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldScrapInHouseBillList");
@@ -3422,7 +3422,7 @@
        /// <returns></returns>
        [Route("Sc_MouldScrapInHouseBill/SaveGetMouldScrapInHouseBillList")]
        [HttpPost]
        public object SaveGetMouldScrapInHouseBillList([FromBody] JObject msg)
        public object fSaveGetMouldScrapInHouseBillList([FromBody] JObject msg)
        {
            var _value = msg["msg"].ToString();
            string msg1 = _value.ToString();
@@ -3430,12 +3430,23 @@
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();
            string refSav = sArray[2].ToString();
            string msg4 = sArray[3].ToString();

            string UserName = "";
            string s = "";
            ListModels oListModels = new ListModels();
            try
            {
                //编辑权限
                if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapRequestBill_Edit", 1, true, msg4))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                DLL.ClsSc_MouldScrapInBill oBill = new DLL.ClsSc_MouldScrapInBill();
                List<Models.ClsSc_MouldStockBillMain> lsmain = new List<Models.ClsSc_MouldStockBillMain>();
                msg2 = msg2.Replace("\\", "");
@@ -3745,12 +3756,21 @@

        [Route("Sc_MouldScrapOutHouseBill/GetMouldScrapOutHouseBill")]
        [HttpGet]
        public object GetMouldScrapOutHouseBill(string sWhere)
        public object GetMouldScrapOutHouseBill(string sWhere,string user, string Organization)
        {
            try
            {
                //编辑权限
                if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBillList", 1, true, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                ds = Sc_GetMouldScrapOutHouseBill(sWhere);
                ds = Sc_GetMouldScrapOutHouseBill(sWhere,Organization);
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "返回记录成功！";
@@ -3767,16 +3787,16 @@
            }
        }

        public static DataSet Sc_GetMouldScrapOutHouseBill(string sWhere)
        public static DataSet Sc_GetMouldScrapOutHouseBill(string sWhere, string Organization)
        {
            string sql1 = string.Format(@"select * from h_v_Sc_MouldScrapOutHouseBillList where 库存组织='" + Organization + "'");
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldScrapOutHouseBillList ", "h_v_Sc_MouldScrapOutHouseBillList");
                return new SQLHelper.ClsCN().RunProcReturn(sql1+ "order by 日期 desc", "h_v_Sc_MouldScrapOutHouseBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldScrapOutHouseBillList where 1 = 1 ";
                string sql = sql1 + sWhere;
                string sql = sql1 + sWhere+ "order by 日期 desc";
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldScrapOutHouseBillList");
            }
        }
@@ -3814,7 +3834,7 @@
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,HPropertyID,辅助属性代码 HPropertyCode,辅助属性名称 HPropertyName,
                                                  HSecUnitID, 辅助计量单位代码 HSecUnitCode, 辅助计量单位名称 HSecUnitName, 换算率 HSecUnitRate, HUnitID, 计量单位代码 HUnitCode, 计量单位名称 HUnitName, 批次 HBatchNo,
                                                  设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife, 实发数量 HQty, 单价 HPrice, 金额 HMoney, HWHID, 发货仓库代码 HWHCode, 发货仓库名称 HWHName,
                                                  HSPID, 仓位代码 HSPCode, 仓位名称 HSPName, 备注 HRemark FROM h_v_Sc_MouldScrapOutHouseBillList"), "h_v_Sc_MouldScrapOutHouseBillList");
                                                  HSPID, 仓位代码 HSPCode, 仓位名称 HSPName, 备注 HRemark,HStockOrgID FROM h_v_Sc_MouldScrapOutHouseBillList"), "h_v_Sc_MouldScrapOutHouseBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
@@ -3828,7 +3848,7 @@
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,HPropertyID,辅助属性代码 HPropertyCode,辅助属性名称 HPropertyName,
                                                  HSecUnitID, 辅助计量单位代码 HSecUnitCode, 辅助计量单位名称 HSecUnitName, 换算率 HSecUnitRate, HUnitID, 计量单位代码 HUnitCode, 计量单位名称 HUnitName, 批次 HBatchNo,
                                                  设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife, 实发数量 HQty, 单价 HPrice, 金额 HMoney, HWHID, 发货仓库代码 HWHCode, 发货仓库名称 HWHName,
                                                  HSPID, 仓位代码 HSPCode, 仓位名称 HSPName, 备注 HRemark FROM h_v_Sc_MouldScrapOutHouseBillList where 1 = 1 ");
                                                  HSPID, 仓位代码 HSPCode, 仓位名称 HSPName, 备注 HRemark,HStockOrgID FROM h_v_Sc_MouldScrapOutHouseBillList where 1 = 1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldScrapOutHouseBillList");

@@ -3864,12 +3884,22 @@
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();

            string msg4 = sArray[2].ToString();

            string UserName = "";
            ListModels oListModels = new ListModels();
            try
            {
                //编辑权限
                if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Edit", 1, true, msg4))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无删除权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                DLL.ClsSc_MouldScrapOutBill oBill = new DLL.ClsSc_MouldScrapOutBill();
                List<Model.ClsSc_MouldStockBillMain> lsmain = new List<Model.ClsSc_MouldStockBillMain>();
                msg2 = msg2.Replace("\\", "");
@@ -3991,17 +4021,17 @@
        /// <returns></returns>
        [Route("Sc_MouldScrapOutHouseBill/DeltetMouldScrapOutHouseBill")]
        [HttpGet]
        public object DeltetMouldScrapOutHouseBill(string HInterID)
        public object DeltetMouldScrapOutHouseBill(string HInterID,string user)
        {
            //编辑权限
            //if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
            //{
            //    objJsonResult.code = "0";
            //    objJsonResult.count = 0;
            //    objJsonResult.Message = "无删除权限！";
            //    objJsonResult.data = null;
            //    return objJsonResult;
            //}
            if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Delete", 1, true, user))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无删除权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }


            Int64 lngBillKey = 0;
@@ -4211,12 +4241,20 @@

        [Route("Sc_MouldProdBackBill/GetMouldProdBackBill")]
        [HttpGet]
        public object GetMouldProdBackBill(string sWhere)
        public object GetMouldProdBackBill(string sWhere,string user, string Organization)
        {
            try
            {
                if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBillList", 1, true, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有查看权限";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                ds = Sc_GetMouldProdBackBill(sWhere);
                ds = Sc_GetMouldProdBackBill(sWhere,Organization);
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "返回记录成功！";
@@ -4233,16 +4271,16 @@
            }
        }

        public static DataSet Sc_GetMouldProdBackBill(string sWhere)
        public static DataSet Sc_GetMouldProdBackBill(string sWhere,string Organization)
        {
            string sql1 = string.Format(@"select * from h_v_Sc_MouldProdBackBillList where 库存组织='" + Organization + "'");
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldProdBackBillList ", "h_v_Sc_MouldProdBackBillList");
                return new SQLHelper.ClsCN().RunProcReturn(sql1 + "order by 日期 desc", "h_v_Sc_MouldProdBackBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldProdBackBillList where 1 = 1 ";
                string sql = sql1 + sWhere;
                string sql = sql1 + sWhere+ "order by 日期 desc";
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldProdBackBillList");
            }

@@ -4278,9 +4316,10 @@
                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (sqlWhere == null || sqlWhere.Equals(""))
                {
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID 模具代码,设计寿命,剩余寿命,累积使用寿命,HWHID 仓库,
                                                  HSPID 仓位代码,模具新规格,最后生产产品,退库类型,
                                                  表头备注  FROM h_v_Sc_MouldProdBackBillList"), "h_v_Sc_MouldProdBackBillList");
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID, 
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldProdBackBillList"), "h_v_Sc_MouldProdBackBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
@@ -4291,9 +4330,10 @@
                {

                    //string sql1 = "select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark  from Sc_MouldRepairCheckBillSub where 1 = 1 ";
                    string sql1 = string.Format(@"SELECT HMaterID 模具代码,设计寿命,剩余寿命,累积使用寿命,HWHID 仓库,
                                                  HSPID 仓位代码,模具新规格,最后生产产品,退库类型,
                                                  表头备注  FROM h_v_Sc_MouldProdBackBillList where 1 = 1 ");
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID, 
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldProdBackBillList where 1 = 1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldProdBackBillList");

@@ -4329,12 +4369,21 @@
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();

            string msg4 = sArray[2].ToString();

            string UserName = "";
            ListModels oListModels = new ListModels();
            try
            {
                if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Edit", 1, true, msg4))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有查看权限";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                DLL.ClsSc_MouldProdBackBill oBill = new DLL.ClsSc_MouldProdBackBill();
                List<Model.ClsSc_MouldProdBackBillMain> lsmain = new List<Model.ClsSc_MouldProdBackBillMain>();
                msg2 = msg2.Replace("\\", "");
@@ -4456,17 +4505,17 @@
        /// <returns></returns>
        [Route("Sc_MouldProdBackBill/DeltetMouldProdBackBill")]
        [HttpGet]
        public object DeltetMouldProdBackBill(string HInterID)
        public object DeltetMouldProdBackBill(string HInterID,string user)
        {
            //编辑权限
            //if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
            //{
            //    objJsonResult.code = "0";
            //    objJsonResult.count = 0;
            //    objJsonResult.Message = "无删除权限！";
            //    objJsonResult.data = null;
            //    return objJsonResult;
            //}
            if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Delete", 1, true, user))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无删除权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }


            Int64 lngBillKey = 0;
@@ -4537,12 +4586,20 @@

        [Route("Sc_MouldProdOutBill/GetMouldProdOutBill")]
        [HttpGet]
        public object GetMouldProdOutBill(string sWhere)
        public object GetMouldProdOutBill(string sWhere, string user,string Organization)
        {
            try
            {
                if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBillList", 1, true, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有查看权限";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                ds = Sc_GetMouldProdOutBill(sWhere);
                ds = Sc_GetMouldProdOutBill(sWhere,Organization);
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "返回记录成功！";
@@ -4559,16 +4616,16 @@
            }
        }

        public static DataSet Sc_GetMouldProdOutBill(string sWhere)
        public static DataSet Sc_GetMouldProdOutBill(string sWhere, string Organization)
        {
            string sql1 = string.Format(@"select * from h_v_Sc_MouldProdOutHouseBillList where 库存组织='" + Organization + "'");
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldProdOutHouseBillList ", "h_v_Sc_MouldProdOutHouseBillList");
                return new SQLHelper.ClsCN().RunProcReturn(sql1+ "order by 日期 desc", "h_v_Sc_MouldProdOutHouseBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldProdOutHouseBillList where 1 = 1 ";
                string sql = sql1 + sWhere;
                string sql = sql1 + sWhere+ "order by 日期 desc";
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldProdOutHouseBillList");
            }

@@ -4607,7 +4664,7 @@
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID, 
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark FROM h_v_Sc_MouldProdOutHouseBillList"), "h_v_Sc_MouldProdOutHouseBillList");
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldProdOutHouseBillList"), "h_v_Sc_MouldProdOutHouseBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
@@ -4621,7 +4678,7 @@
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
                                                设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty, 
                                                单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID, 
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark FROM h_v_Sc_MouldProdOutHouseBillList where 1 = 1 ");
                                                仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID FROM h_v_Sc_MouldProdOutHouseBillList where 1 = 1 ");
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldProdOutHouseBillList");

@@ -4657,12 +4714,21 @@
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();
            string msg4= sArray[2].ToString();


            string UserName = "";
            ListModels oListModels = new ListModels();
            try
            {
                if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBill_Edit", 1, true, msg4))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有查看权限";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
                List<Model.ClsSc_MouldProdOutBillMain> lsmain = new List<Model.ClsSc_MouldProdOutBillMain>();
                msg2 = msg2.Replace("\\", "");
@@ -4784,17 +4850,17 @@
        /// <returns></returns>
        [Route("Sc_MouldProdOutBill/DeltetMouldProdOutBill")]
        [HttpGet]
        public object DeltetMouldProdOutBill(string HInterID)
        public object DeltetMouldProdOutBill(string HInterID, string user)
        {
            //编辑权限
            //if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
            //{
            //    objJsonResult.code = "0";
            //    objJsonResult.count = 0;
            //    objJsonResult.Message = "无删除权限！";
            //    objJsonResult.data = null;
            //    return objJsonResult;
            //}
            //删除权限
            if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBill_Delete", 1, true, user))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无删除权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }


            Int64 lngBillKey = 0;
@@ -4891,12 +4957,12 @@
        {
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldLifeChangeBillList ", "h_v_Sc_MouldLifeChangeBillList");
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldLifeChangeBillList order by 日期 desc", "h_v_Sc_MouldLifeChangeBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldLifeChangeBillList where 1 = 1 ";
                string sql = sql1 + sWhere;
                string sql = sql1 + sWhere+ "order by 日期 desc";
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldLifeChangeBillList");
            }