~yxj/MES-WEB-API.git

			@@ -1,4 +1,5 @@
			using Newtonsoft.Json.Linq;
			using Newtonsoft.Json;
			using Newtonsoft.Json.Linq;
			using Pub_Class;
			using System;
			using System.Collections;
			@@ -99,7 +100,7 @@
			double HMoney = 0;
			double HBadCount = list[0].HBadCount;//不良数量
			long HCenterID = list[0].HCenterID;//工作中心ID
			long HProcNo = list[0].HProcNo;//流水号
			string HProcNo = list[0].HProcNo;//流水号
			string HOrderProcNO = list[0].HOrderProcNO;//订单跟踪号
			string HSourceNameList = list[0].HSourceNameList;//设备清单
			long HMainSourceInterID = list[0].HInterID;//递入type得到的单据ID
			@@ -115,6 +116,7 @@
			double HPriceRate = list[0].HPriceRate;//系数
			double HWorkTimes = list[0].HWorkTimes;//工时
			long HQCCheckID = list[0].HQCCheckID;//检验员ID
			long HPRDOrgID = list[0].HPRDOrgID;//组织ID
			//单据完整性判断
			if (HProcExchInterID <= 0)
			{
			@@ -132,7 +134,7 @@
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (HProcNo <= 0)
			if (HProcNo == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			@@ -156,14 +158,14 @@
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (HGroupID == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "生产班组没有选择！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//if (HGroupID == 0)
			//{
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "生产班组没有选择！";
			// objJsonResult.data = null;
			// return objJsonResult;
			//}

			if (HProcID == 0)
			{
			@@ -181,22 +183,22 @@
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (HQCCheckID == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "检验员没有选择！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (HSourceID == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "生产资源没有选择！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//if (HQCCheckID == 0)
			//{
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "检验员没有选择！";
			// objJsonResult.data = null;
			// return objJsonResult;
			//}
			//if (HSourceID == 0)
			//{
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "生产资源没有选择！";
			// objJsonResult.data = null;
			// return objJsonResult;
			//}
			if (HCenterID == 0)
			{
			objJsonResult.code = "0";
			@@ -213,14 +215,15 @@
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (HWorkTimes <= 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "工时必须大于0！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			//if (HWorkTimes <= 0)
			//{
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "工时必须大于0！";
			// objJsonResult.data = null;
			// return objJsonResult;
			//}
			//if (HEmpID2 == 0 )
			//{
			// objJsonResult.code = "0";
			@@ -253,10 +256,13 @@
			// objJsonResult.data = null;
			// return objJsonResult;
			//}
			var num = 0;

			//若MAINDI重复则重新获取
			oCN.BeginTran();
			if ("Add".Equals(eventType))
			{
			num = 1;
			if (!AllowbillNo(HBillNo))
			{
			oCN.RollBack();
			@@ -274,7 +280,7 @@
			",HGroupID,HDeptID,HEmpID,HBarCode,HAddr,HBarCodeMaker,HBarCodeMakeDate,HSourceID2,HSourceID3,HSourceID4,HSourceID5" +
			",HSupID,HQty,HPrice,HMoney,HBadCount,HCenterID,HProcNo,HOrderProcNO,HSourceNameList" +
			",HMainSourceInterID,HMainSourceBillNo,HMainSourceBillType,HLastSubProc" +
			",HEmpID2,HEmpID3,HEmpID4,HEmpID5,HDSQty,HChongQty,HPriceRate,HWorkTimes,HQCCheckID,HMainInterID" +
			",HEmpID2,HEmpID3,HEmpID4,HEmpID5,HDSQty,HChongQty,HPriceRate,HWorkTimes,HQCCheckID,HMainInterID,HPRDOrgID" +
			") " +
			" values('" + BillType + "','" + HBillSubType + "'," + HInterID + ",'" + HBillNo + "'," + HBillStatus + ",getdate(),'" + HMaker + "',getdate(),'" + HMouldNum + "'" +
			"," + HYear + "," + HPeriod + ",'" + HRemark + "','" + HSourceName + "'," + HPieceQty + "," + HWasterQty + "," + HPlanPieceQty + "," + HBadPNL +
			@@ -283,11 +289,12 @@
			"," + HGroupID + "," + HDeptID + "," + HEmpID + ",'" + HBarCode + "','" + HAddr + "','" + HBarCodeMaker + "',getdate()" + "," + HSourceID2 + "," + HSourceID3 + "," + HSourceID4 + "," + HSourceID5 +
			"," + HSupID + "," + HQty + "," + HPrice + "," + HMoney + "," + HBadCount + "," + HCenterID + "," + HProcNo + ",'" + HOrderProcNO + "'" + ",'" + HSourceNameList + "'" +
			"," + HMainSourceInterID + ",'" + HMainSourceBillNo + "','" + HMainSourceBillType + "'," + Convert.ToString(HLastSubProc ? 1 : 0) +
			"," + HEmpID2 + "," + HEmpID3 + "," + HEmpID4 + "," + HEmpID5 + "," + HDSQty + "," + HChongQty + "," + HPriceRate + "," + HWorkTimes + "," + HQCCheckID + "," + HMainInterID +
			"," + HEmpID2 + "," + HEmpID3 + "," + HEmpID4 + "," + HEmpID5 + "," + HDSQty + "," + HChongQty + "," + HPriceRate + "," + HWorkTimes + "," + HQCCheckID + "," + HMainInterID + "," + HPRDOrgID +
			") ");
			}
			else if ("Modify".Equals(eventType))
			{
			num = 2;
			oCN.RunProc("UpDate Sc_StationOutBillMain set " +
			"HUpDater='" + HMaker + "'" +
			",HUpDateDate=getdate()" +
			@@ -356,7 +363,7 @@
			objJsonResult.data = null;
			return objJsonResult;
			}
			oCN.RunProc("exec h_p_Mes_ProcessExchangeRelationQty_Out " + HInterID + ",1");
			oCN.RunProc("exec h_p_Mes_ProcessExchangeRelationQty_Out " + HInterID + ","+ num + "");
			oCN.RunProc("exec h_p_Mes_ProcessExchangeChangeStatus " + HInterID + " ");
			oCN.RunProc("exec h_p_Mes_StationOutBillBackBarCode " + HInterID + " ");
			//判断是否是末道工序
			@@ -392,6 +399,7 @@
			}
			catch (Exception e)
			{
			oCN.RollBack();
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			@@ -399,6 +407,292 @@
			return objJsonResult;
			}
			}







			/// <summary>
			/// 新增单据-批量出站单保存按钮
			///参数：string sql。
			///返回值：object。
			/// </summary>
			[Route("Cj_StationOutBill/AddBill_Mul")]
			[HttpPost]
			public object AddBill_Mul([FromBody] JObject oMain)
			{


			string UserName = "";


			try
			{
			var _value = oMain["oMain"].ToString();
			string msg1 = _value.ToString();

			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();
			string msg5 = sArray[3].ToString();

			List<Model.ClsSc_StationOutBillMain> list = new List<Model.ClsSc_StationOutBillMain>();

			msg1 = msg1.Replace("\\", "");
			msg1 = msg1.Replace("\n", ""); //\n
			ListModels oListModels = new ListModels();
			list = oListModels.getObjectByJson_Sc_StationOutBillMain(msg2);
			int i = 0;
			int j = 0;
			foreach (Model.ClsSc_StationOutBillMain oItemSub in list)
			{
			DAL.ClsSc_StationOutBill oBill = new DAL.ClsSc_StationOutBill();
			j++;
			oBill.omodel.HInterID = list[i].HInterID;
			oBill.omodel.HBillNo = msg3 + "- " + j;
			oBill.omodel.HBillStatus = 0;
			oBill.omodel.HMouldNum = list[i].HMouldNum;
			oBill.omodel.HYear = DateTime.Now.Year;
			oBill.omodel.HPeriod = DateTime.Now.Month;
			oBill.omodel.HRemark = list[i].HRemark;
			oBill.omodel.HSourceName = list[i].HSourceName;
			oBill.omodel.HPieceQty = list[i].HPieceQty;
			oBill.omodel.HWasterQty = list[i].HWasterQty;
			oBill.omodel.HPlanPieceQty = list[i].HPlanPieceQty;
			oBill.omodel.HBadPNL = list[i].HBadPNL;
			oBill.omodel.HICMOInterID = list[i].HICMOInterID;
			oBill.omodel.HICMOBillNo = list[i].HICMOBillNo;
			oBill.omodel.HProcExchInterID = list[i].HProcExchInterID;
			oBill.omodel.HProcExchEntryID = list[i].HProcExchEntryID;
			oBill.omodel.HProcExchBillNo = list[i].HProcExchBillNo;
			oBill.omodel.HMaterID = list[i].HMaterID;
			oBill.omodel.HProcID = list[i].HProcID;
			oBill.omodel.HICMOQty = list[i].HICMOQty;
			oBill.omodel.HPlanQty = list[i].HPlanQty;
			oBill.omodel.HStationOutTime = list[i].HStationOutTime;
			oBill.omodel.HSourceID = list[i].HSourceID;
			oBill.omodel.HPayProcID = list[i].HPayProcID;
			oBill.omodel.HGroupID = list[i].HGroupID;
			oBill.omodel.HDeptID = list[i].HDeptID;
			oBill.omodel.HEmpID = list[i].HEmpID;
			oBill.omodel.HBarCode = list[i].HBarCode;
			oBill.omodel.HAddr = list[i].HAddr;
			//oBill.omodel.HBarCodeMaker = list[i].HBarCodeMaker;
			oBill.omodel.HBarCodeMaker = msg4;
			oBill.omodel.HSourceID2 = list[i].HSourceID2;
			oBill.omodel.HSourceID3 = list[i].HSourceID3;
			oBill.omodel.HSourceID4 = list[i].HSourceID4;
			oBill.omodel.HSourceID5 = list[i].HSourceID5;
			oBill.omodel.HSupID = list[i].HSupID;
			oBill.omodel.HQty = list[i].HQty;
			oBill.omodel.HPrice = list[i].HPrice;
			oBill.omodel.HMoney = list[i].HMoney;
			oBill.omodel.HBadCount = list[i].HBadCount;
			oBill.omodel.HCenterID = list[i].HCenterID;
			oBill.omodel.HProcNo = list[i].HProcNo;
			oBill.omodel.HOrderProcNO = list[i].HOrderProcNO;
			oBill.omodel.HSourceNameList = list[i].HSourceNameList;
			oBill.omodel.HMainSourceInterID = list[i].HMainSourceInterID;
			oBill.omodel.HMainSourceBillNo = list[i].HMainSourceBillNo;
			oBill.omodel.HMainSourceBillType = list[i].HMainSourceBillType;
			oBill.omodel.HLastSubProc = true;
			oBill.omodel.HEmpID2 = list[i].HEmpID2;
			oBill.omodel.HEmpID3 = list[i].HEmpID3;
			oBill.omodel.HEmpID4 = list[i].HEmpID4;
			oBill.omodel.HEmpID5 = list[i].HEmpID5;
			oBill.omodel.HDSQty = list[i].HDSQty;
			oBill.omodel.HChongQty = list[i].HChongQty;
			oBill.omodel.HPriceRate = list[i].HPriceRate;
			oBill.omodel.HWorkTimes = list[i].HWorkTimes;
			oBill.omodel.HQCCheckID = list[i].HQCCheckID;
			oBill.omodel.HMaker = msg4;
			oBill.omodel.HEmpNum = msg5;

			//string HBillSubType = "3791";
			//long HInterID = list[0].HInterID;//递入type得到的单据ID
			//string HBillNo = msg3 + "- " + i;//递入type得到的单据号
			//int HBillStatus = 0;
			//string HMaker = list[0].HMaker;//制单人
			//string HMouldNum = list[0].HMouldNum;//模穴号
			//int HYear = 2021;
			//double HPeriod = 1;
			//string HRemark = list[0].HRemark;//备注
			//string HSourceName = list[0].HSourceName;//生产资源名称
			//double HPieceQty = list[0].HPieceQty;//进站PCS数
			//double HWasterQty = list[0].HWasterQty;//报废数量
			//double HPlanPieceQty = list[0].HPlanPieceQty;//进站PNL数
			//double HBadPNL = list[0].HBadPNL;//报废PNL数
			//long HICMOInterID = list[0].HICMOInterID;//任务单ID
			//string HICMOBillNo = list[0].HICMOBillNo;//任务单
			//int HProcPlanInterID = 0;
			//int HProcPlanEntryID = 0;
			//string HProcPlanBillNo = "";
			//long HProcExchInterID = list[0].HProcExchInterID;
			//long HProcExchEntryID = list[0].HProcExchEntryID;
			//string HProcExchBillNo = list[0].HProcExchBillNo;//流转卡
			//long HMaterID = list[0].HMaterID;//产品ID
			//long HProcID = list[0].HProcID;//当前工序ID
			//double HICMOQty = list[0].HICMOQty;//任务单数量
			//double HPlanQty = list[0].HPlanQty;//移交PNL数
			//DateTime HStationOutTime = list[0].HStationOutTime;//汇报时间
			//long HSourceID = list[0].HSourceID;//生产资源ID
			//long HPayProcID = list[0].HPayProcID;//核算工序ID
			//long HGroupID = list[0].HGroupID;//班组ID
			//long HDeptID = 0;
			//long HEmpID = list[0].HEmpID;//操作员ID
			//string HBarCode = list[0].HBarCode;//条形码
			//string HAddr = "";
			//string HBarCodeMaker = "";
			//long HSourceID2 = list[0].HSourceID2;//生产资源2ID
			//long HSourceID3 = list[0].HSourceID3;//生产资源3ID
			//long HSourceID4 = list[0].HSourceID4;//生产资源4ID
			//long HSourceID5 = list[0].HSourceID5;//生产资源5ID
			//long HSupID = 0;
			//double HQty = list[0].HQty;//合格数量
			//double HPrice = 0;
			//double HMoney = 0;
			//double HBadCount = list[0].HBadCount;//不良数量
			//long HCenterID = list[0].HCenterID;//工作中心ID
			//long HProcNo = list[0].HProcNo;//流水号
			//string HOrderProcNO = list[0].HOrderProcNO;//订单跟踪号
			//string HSourceNameList = list[0].HSourceNameList;//设备清单
			//long HMainSourceInterID = list[0].HInterID;//递入type得到的单据ID
			//string HMainSourceBillNo = list[0].HBillNo;//递入type得到的单据号
			//string HMainSourceBillType = "3790";
			//bool HLastSubProc = list[0].HLastSubProc;//转下工序
			//long HEmpID2 = list[0].HEmpID2;//操作员2ID
			//long HEmpID3 = list[0].HEmpID3;//操作员3ID
			//long HEmpID4 = list[0].HEmpID4;//操作员4ID
			//long HEmpID5 = list[0].HEmpID5;//操作员5ID
			//double HDSQty = list[0].HDSQty;//折弯刀数
			//double HChongQty = list[0].HChongQty;//NCT冲次数
			//double HPriceRate = list[0].HPriceRate;//系数
			//double HWorkTimes = list[0].HWorkTimes;//工时
			//long HQCCheckID = list[0].HQCCheckID;//检验员ID

			//保存
			//保存完毕后处理
			bool bResult;
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			oCN.RunProc($"update Sc_StationOutBillMain set HMaker='{msg4}' where HInterID={oBill.omodel.HInterID}");
			i++;
			//if (bResult)
			//{
			// objJsonResult.code = "0";
			// objJsonResult.count = 1;
			// objJsonResult.Message = "保存成功！";
			// //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			// objJsonResult.data = 1;
			// return objJsonResult;
			//}
			//else
			//{
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			// objJsonResult.data = 1;
			// return objJsonResult;
			//}
			}
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}

			//递入物料信息返回未完全汇报的流转卡
			[Route("LEMS/Sc_StationOutBill_Mul_RYQ")]
			[HttpGet]
			public object Sc_StationOutBill_Mul_RYQ(String HMaterName, Int64 HOrgID)
			{
			try
			{
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			DataSet ds = oCN.RunProcReturn("exec h_p_CJGXPLHB_Query '" + HMaterName + "'," + HOrgID + "", "h_p_CJGXPLHB_Query");

			if (ds == null \|\| ds.Tables[0].Rows.Count <= 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！";
			objJsonResult.data = null;
			return objJsonResult;
			//DBUtility.ClsPub.MessageBeep((int)DBUtility.ClsPub.BeepType.Warning);
			}
			else
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "获取信息成功！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			}
			catch (Exception e)
			{

			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			//选中网格里面的某一行流转卡返回该流转卡的进出站情况
			[Route("LEMS/Mul_RYQ_DisPlayBillList")]
			[HttpGet]
			public object Mul_RYQ_DisPlayBillList(String HBillNo,String HProcName)
			{
			try
			{
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			DataSet ds = oCN.RunProcReturn("exec h_P_Mul_RYQ_DisPlayBillList '" + HBillNo + "','" + HProcName + "'", "h_P_Mul_RYQ_DisPlayBillList");

			if (ds == null \|\| ds.Tables[0].Rows.Count <= 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！";
			objJsonResult.data = null;
			return objJsonResult;
			//DBUtility.ClsPub.MessageBeep((int)DBUtility.ClsPub.BeepType.Warning);
			}
			else
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "获取信息成功！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			}
			catch (Exception e)
			{

			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}



			private bool AllowbillNo(string HBillNo)
			{
			@@ -418,6 +712,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>();
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Cj_StationOutBill_Query", 1, false, user))
			{
			@@ -438,22 +733,32 @@
			string sql = sql1 + sWhere+ " order by hmainid desc";
			ds = oCN.RunProcReturn(sql, "h_v_MES_StationOutBillList");
			}
			if (ds == null \|\| ds.Tables[0].Rows.Count == 0)

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无记录！";
			objJsonResult.data = null;
			return objJsonResult;
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}
			else
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}

			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.list = columnNameList;
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			//}
			//else
			//{
			//objJsonResult.code = "0";
			//objJsonResult.count = 0;
			//objJsonResult.Message = "无数据";
			//objJsonResult.data = null;
			//return objJsonResult;
			//}
			}
			catch (Exception e)
			{
			@@ -614,6 +919,126 @@

			}
			catch(Exception e)
			{
			Result_Ob = new { result = 0, returnval = e.Message };
			}
			return Result_Ob;
			}





			[Route("Cj_StationOutBill/UploadFile2")]
			[HttpPost]
			public object UploadFile2()
			{

			string HBillNo = HttpContext.Current.Request.Params["HBillNo"]; //单据号
			string HRemark = HttpContext.Current.Request.Params["HRemark"]; //备注
			string HUserName = HttpContext.Current.Request.Params["HUserName"]; //创建人
			HttpPostedFile files = HttpContext.Current.Request.Files["file"];
			string path = HttpContext.Current.Server.MapPath("~/../Files/" + HBillNo);
			//string path = @"D:\\Files\\"+ HBillNo;
			dynamic dyResult = UpLoadFile1(files, path, HBillNo, HRemark, HUserName);
			if (dyResult != null && dyResult.result == 1)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "上传成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = dyResult.returnval;
			objJsonResult.data = null;
			return objJsonResult;
			}

			}

			public dynamic UpLoadFile1(HttpPostedFile files, string path, string HBillNo, string HRemark, string HUserName)
			{
			dynamic Result_Ob = new { result = 1, returnval = "上传成功！" };
			string filePath = Path.GetFullPath(files.FileName);//文件上传路径
			string fileExtension = Path.GetExtension(files.FileName);// 文件扩展名
			string filename = files.FileName;//文件名
			string fileSavePath = path;// 上传保存路径
			int filesize = files.ContentLength;//获取上传文件的大小单位为字节byte
			int Maxsize = 40000 * 1024;//定义上传文件的最大空间大小为40M
			try
			{
			if (files == null \|\| files.ContentLength <= 0)
			{
			Result_Ob = new { result = 0, returnval = "文件不能为空!" };
			return Result_Ob;
			}
			if (filesize >= Maxsize)
			{
			Result_Ob = new { result = 0, returnval = "上传文件超过40M，不能上传！" };
			return Result_Ob;
			}

			string fileurl = Path.Combine(fileSavePath, filename);
			if (Directory.Exists(fileurl) == true) //如果存在重名文件就提示
			{
			Result_Ob = new { result = 0, returnval = "存在同名文件！" };
			return Result_Ob;
			}
			//删除数据表数据
			ds = oCN.RunProcReturn("delete from MES_AccessoriesList where HSourceBillNo ='" + HBillNo + "' and HFileName='" + filename + "'", "MES_AccessoriesList");
			if (Directory.Exists(path))
			{
			File.Delete(fileurl); //删除指定文件
			files.SaveAs(fileurl);
			string StrPath = "/files/" + HBillNo + "/" + filename;
			if (File.Exists(fileurl))
			{
			//这里可以执行一些其它的操作，比如更新数据库
			//写入数据表
			oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
			",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
			",HFileClsID,HSourceBillNo" +
			") values('"
			+ filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
			",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
			"','" + 0 + "','" + HBillNo +
			"') ");
			}
			else
			{
			Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
			}
			}
			else
			{
			Directory.CreateDirectory(fileSavePath); //添加文件夹
			files.SaveAs(fileurl);
			string StrPath = "/files/" + HBillNo + "/" + filename;
			if (File.Exists(fileurl))
			{
			//这里可以执行一些其它的操作，比如更新数据库
			//写入数据表
			oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
			",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
			",HFileClsID,HSourceBillNo" +
			") values('"
			+ filename.ToString() + "','" + fileurl.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
			",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
			"','" + 0 + "','" + HBillNo +
			"') ");
			}
			else
			{
			Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
			}
			}

			}
			catch (Exception e)
			{
			Result_Ob = new { result = 0, returnval = e.Message };
			}
			@@ -783,6 +1208,72 @@
			return objJsonResult;
			}

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "异常！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region 根据单据号同步报错删除出站单
			[Route("Cj_StationOutBill/DelStationOutBill")]
			[HttpGet]
			public object DelStationOutBill(string HInterID)
			{
			try
			{
			DAL.ClsSc_StationOutBill oBill = new DAL.ClsSc_StationOutBill();

			SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();

			DataTable DTable;
			int num = 0;
			//判断入库是否同步
			DTable = oCN.RunProcReturn("select * from Sc_StationOutBillMain where HInterID='" + HInterID + "' and HRelationQty=0", "Sc_StationOutBillMain").Tables[0];
			if (DTable.Rows.Count != 0)
			{
			num++;
			}
			//判断本次报废是否同步
			DTable = oCN.RunProcReturn("select * from Sc_StationOutBillMain where HProcExchInterID='" + DTable.Rows[0]["HProcExchInterID"].ToString() + "' and HBFFlag=0 ", "Sc_StationOutBillMain").Tables[0];
			if (DTable.Rows.Count != 0)
			{
			num++;
			}

			if (num == 2)
			{
			if (!oBill.DeleteBill(long.Parse(HInterID), 0, 0, ref DBUtility.ClsPub.sExeReturnInfo))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "删除成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			else
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "无须删除！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			}
			catch (Exception e)
			{
			@@ -1148,5 +1639,7 @@
			}
			#endregion



			}
			}