1

沈泽

2021-08-27 f4c9c486078f80aad9b9d28cbfc92bb4b78239b3

 WebAPI/Controllers/Sc_CheckToolsRepairWorkBillController.cs

@@ -219,7 +219,18 @@

        public static DataSet Sc_MouldMaintainBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldMaintainBillList ", "h_v_Sc_MouldMaintainBillList");
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select *  from h_v_Sc_MouldMaintain", "h_v_Sc_MouldMaintain");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldMaintain where 1 = 1 ";
                string sql = sql1 + sWhere;
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldMaintain");
              
            }
            //return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldMaintainBillList ", "h_v_Sc_MouldMaintainBillList");
        }
        #endregion

@@ -317,7 +328,7 @@

        public static DataSet Sc_MouldDotCheckBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldDotCheckBillList ", "h_v_Sc_MouldDotCheckBillList");
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldDotCheckBillList where 1=1 "+sWhere+" ", "h_v_Sc_MouldDotCheckBillList");
        }
        #endregion

@@ -464,7 +475,11 @@

        public static DataSet Sc_MouldConkBookBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldConkBookBillList ", "h_v_Sc_MouldConkBookBillList");
            if (sWhere != "" || sWhere != null) 
            {
                sWhere = " where 1=1 " + sWhere;
            }
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldConkBookBillList "+sWhere+"", "h_v_Sc_MouldConkBookBillList");
        }
        #endregion

@@ -610,7 +625,16 @@

        public static DataSet Sc_MouldRepairWorkBillList_s(string sWhere)
        {
            return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList ", "h_v_Sc_MouldRepairWorkBillList");
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList " + sWhere, "h_v_Sc_MouldRepairWorkBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList where 1 = 1 ";
                string sql = sql1 + sWhere;
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList");
            }
        }
        #endregion

@@ -1353,7 +1377,7 @@
                if (sqlWhere == null || sqlWhere.Equals(""))
                {
                    //ds = oCN.RunProcReturn("select HRepairID,HRepairExplanation,HManagerID,HMoney,HRemark   from Sc_MouldRepairWorkBillSub", "Sc_MouldRepairWorkBillSub");
                    ds = oCN.RunProcReturn("select HRepairSonID HRepairID, 子维修项目代码 HRepairCode,子维修项目 HRepairName,子维修要求 HRepairExplanation,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,维修费用 HMoney,表体备注 HRemark  from h_v_Sc_MouldRepairWorkBillList_Edit", "h_v_Sc_MouldRepairWorkBillList_Edit");
                    ds = oCN.RunProcReturn("select HRepairID, 子维修项目代码 HRepairCode,子维修项目 HRepairName,子维修要求 HRepairExplanation,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,维修费用 HMoney,表体备注 HRemark  from h_v_Sc_MouldRepairWorkBillList_Edit", "h_v_Sc_MouldRepairWorkBillList_Edit");
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
@@ -1362,7 +1386,7 @@
                else
                {
                    //string sql1 = "select HRepairID,HRepairExplanation,HManagerID,HMoney,HRemark  from Sc_MouldRepairWorkBillSub where 1 = 1 ";
                    string sql1 = "select HRepairSonID HRepairID, 子维修项目代码 HRepairCode,子维修项目 HRepairName,子维修要求 HRepairExplanation,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,维修费用 HMoney,表体备注 HRemark  from h_v_Sc_MouldRepairWorkBillList_Edit where 1 = 1 ";
                    string sql1 = "select HRepairID,子维修项目代码 HRepairCode,子维修项目 HRepairName,子维修要求 HRepairExplanation,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,维修费用 HMoney,表体备注 HRemark  from h_v_Sc_MouldRepairWorkBillList_Edit where 1 = 1 ";
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList_Edit");
                    objJsonResult.code = "0";
@@ -2432,6 +2456,7 @@
        #endregion

        #endregion

        #region 模具保养记录表

        #region 模具保养记录表 保存/编辑
@@ -2449,7 +2474,7 @@
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();

            string msg4 = sArray[2].ToString();

            string UserName = "";
            ListModels oListModels = new ListModels();
@@ -2462,10 +2487,10 @@
                lsmain = oListModels.getObjectByJson_Sc_MouldMaintainBillMain(msg2);
                foreach (Model.ClsSc_MouldMaintainBillMain oItem in lsmain)
                {
                    //oItem.HMaker = "";
                    UserName = oItem.HMaker;  //制单人
                    oItem.HBillType = "3818";
                    oItem.HBillSubType = "3818";
                    DBUtility.ClsPub.CurUserName = UserName;
                    oItem.HBillType = "3819";
                    oItem.HBillSubType = "3819";

                    //oItem.HInterID =0;
                    //oItem.HBillNo = "";
@@ -2493,16 +2518,16 @@
                    }
                    oBill.omodel = oItem;
                }
                //表体数据
                //保养项表体数据
                //按 },{来拆分数组 //去掉【和】
                msg3 = msg3.Substring(1, msg3.Length - 2);
                msg3 = msg3.Replace("\\", "");
                msg3 = msg3.Replace("\n", "");  //\n
                //msg2 = msg2.Replace("'", "’");
                List<Model.ClsSc_MouldMaintainBillSub> ls = new List<Model.ClsSc_MouldMaintainBillSub>();
                ls = oListModels.getObjectByJson_Sc_MouldMaintainBillSub(msg3);
                List<Model.ClsSc_MouldMaintainRuleBillSub_Item> ls = new List<Model.ClsSc_MouldMaintainRuleBillSub_Item>();
                ls = oListModels.getObjectByJson_Sc_MouldMaintainRuleBillSub_Item(msg3);
                int i = 0;
                foreach (Model.ClsSc_MouldMaintainBillSub oItemSub in ls)
                foreach (Model.ClsSc_MouldMaintainRuleBillSub_Item oItemSub in ls)
                {

                    i++;
@@ -2516,6 +2541,32 @@
                    //oItemSub.HSourceBillNo = "";  //源单单号
                    //oItemSub.HSourceBillType = ""; //源单类型
                    oItemSub.HRelationQty = 0;     //关联数量
                    oBill.DetailCol.Add(oItemSub);

                }
                //配件项表体数据
                //按 },{来拆分数组 //去掉【和】
                msg4 = msg4.Substring(1, msg4.Length - 2);
                msg4 = msg4.Replace("\\", "");
                msg4 = msg4.Replace("\n", "");  //\n
                //msg2 = msg2.Replace("'", "’");
                List<Model.ClsSc_MouldMaintainBillSub> ls1 = new List<Model.ClsSc_MouldMaintainBillSub>();
                ls1 = oListModels.getObjectByJson_Sc_MouldMaintainBillSub(msg4);
                int j = 0;
                foreach (Model.ClsSc_MouldMaintainBillSub Sub in ls1)
                {

                    j++;
                    Sub.HEntryID = j;
                    //oItemSub.HCloseMan = "";       //行关闭
                    Sub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
                    Sub.HCloseType = false;   //关闭类型
                    //oItemSub.HRemark = "";         //备注
                    Sub.HSourceInterID = 0;     // 源单主内码
                    Sub.HSourceEntryID = 0;   //源单子内码
                    //oItemSub.HSourceBillNo = "";  //源单单号
                    //oItemSub.HSourceBillType = ""; //源单类型
                    Sub.HRelationQty = 0;     //关联数量
                                                   //oItemSub.HRelationMoney = 0;   //关联金额
                                                   //HMaterID = "";//配件代码
                                                   //HUnitID = "";//单位代码
@@ -2523,7 +2574,7 @@
                                                   //HQtyMust = "";//单位用量
                                                   //HRemark = "";//备注

                    oBill.DetailColl.Add(oItemSub);
                    oBill.DetailColl.Add(Sub);

                }
                //保存
@@ -2567,7 +2618,6 @@
        }
        #endregion


        #region[模具保养记录表编辑时获取表头数据]
        [Route("Sc_MouldMaintainBill/Sc_MouldMaintainBillListCheckDetai")]
        [HttpGet]
@@ -2576,12 +2626,13 @@
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldMaintainBillList  where hmainid= " + HID + " ", "h_v_Sc_MouldMaintainBillList");
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldMaintain  where hmainid= " + HID + " ", "h_v_Sc_MouldMaintain");
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在保养记录表" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        #endregion

        #region[模具保养记录表编辑时获取表题数据]
        [Route("Sc_MouldMaintainBill/Sc_MouldMaintainBillListProjectDetai")]
        [HttpGet]
@@ -2621,13 +2672,56 @@
        }
        #endregion

        #region[模具保养记录表编辑时获取表体数据新(保养项列表、配件项列表)]
        [Route("Sc_MouldMaintainBill/Sc_MouldMaintainBillListProjectDetaiNew")]
        [HttpGet]
        public object Sc_MouldMaintainBillListProjectDetaiNew(string HInterID)
        {

            DataSet ds,ds1;
            List<object> list = new List<object>();
            string Swhere = "";
            try
            {
                if (HInterID != "" || HInterID != null)
                {
                    Swhere = " and hmainid='" + HInterID + "'";
                }
                else 
                {
                    Swhere = HInterID;
                }
                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                //获取保养项目编辑数据
                string sql = "select HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目名称 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,HManagerID,负责人代码 HManagerNumber,负责人 HManagerName,表体备注 HRemark  from h_v_Sc_MouldMaintainBillListItem where 1 = 1 " + Swhere + "";
                ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldMaintainBillListItem");
               //获取配件项目编辑数据
                string sql1 = "select HMaterID, 配件代码 HMaterNumber,配件名称 HMaterName,规格型号 HMaterSpec,HUnitID,单位代码 HUnitNumber,单位名称 HUnitName,实际用量 HQty,标准用量 HQtyMust,HManagerID,负责人代码 HManagerNumber,负责人 HManagerName,表体备注 HRemark  from h_v_Sc_MouldMaintainBillList where 1 = 1 " + Swhere + "";
                ds1 = oCN.RunProcReturn(sql1, "h_v_Sc_MouldMaintainBillList");
                list.Add(ds.Tables[0]);
                list.Add(ds1.Tables[0]);
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "获取信息成功！";
                objJsonResult.list = list;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + e.ToString();
                objJsonResult.data = null;
            }
            return objJsonResult;
        }
        #endregion

        #region [模具保养记录表删除功能]
        /// <summary>
        /// 模具维修单删除功能
        /// </summary>
        /// <returns></returns>
        [Route("Sc_MouldMaintainBill/DeltetSc_MouldMaintainBill")]
            /// <summary>
            /// 模具维修单删除功能
            /// </summary>
            /// <returns></returns>
            [Route("Sc_MouldMaintainBill/DeltetSc_MouldMaintainBill")]
        [HttpGet]
        public object DeltetSc_MouldMaintainBill(string HInterID)
        {
@@ -2702,8 +2796,8 @@
        }
        #endregion


        #endregion

        #region 模具点检记录表

        #region 模具点检记录表 保存/编辑
@@ -2865,7 +2959,7 @@
                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (sqlWhere == null || sqlWhere.Equals(""))
                {
                    ds = oCN.RunProcReturn("select HDotCheckItem,HDotCheckPart,HClaim,HRemark,HManagerID from Sc_MouldDotCheckBillSub", "Sc_MouldMaintainBillSub");
                    ds = oCN.RunProcReturn("select 点检项目 HDotCheckItem,点检部位 HDotCheckPart,具体要求 HClaim,表体备注 HRemark,HManagerID,负责人代码 HManagerNumber,负责人 HManagerName from h_v_Sc_MouldDotCheckBillList", "h_v_Sc_MouldDotCheckBillList");
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
@@ -2873,9 +2967,9 @@
                }
                else
                {
                    string sql1 = "select HDotCheckItem,HDotCheckPart,HClaim,HRemark,HManagerID from Sc_MouldDotCheckBillSub where 1 = 1 ";
                    string sql1 = "select 点检项目 HDotCheckItem,点检部位 HDotCheckPart,具体要求 HClaim,表体备注 HRemark,HManagerID,负责人代码 HManagerNumber,负责人 HManagerName from h_v_Sc_MouldDotCheckBillList where 1 = 1 ";
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "Sc_MouldDotCheckBillSub");
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldDotCheckBillList");
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
@@ -2892,7 +2986,6 @@
            return objJsonResult;
        }
        #endregion


        #region [模具点检记录表删除功能]
        /// <summary>
@@ -2976,6 +3069,7 @@


        #endregion

        #region 模具点检计划表

        #region 模具点检计划表 保存/编辑
@@ -3254,48 +3348,6 @@
        #region 模具报废入库单


        #region 模具报废入库单列表

        [Route("Sc_MouldScrapInHouseBill/GetMouldScrapInHouseBill")]
        [HttpGet]
        public object GetMouldScrapInHouseBill(string sWhere)
        {
            try
            {

                ds = Sc_GetMouldScrapInHouseBill(sWhere);
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "返回记录成功！";
                objJsonResult.data = ds.Tables[0];
                return objJsonResult;
            }
            catch (Exception ex)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        public static DataSet Sc_GetMouldScrapInHouseBill(string sWhere)
        {
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldScrapInHouseBillList " + sWhere, "h_v_Sc_MouldScrapInHouseBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldScrapInHouseBillList where 1 = 1 ";
                string sql = sql1 + sWhere;
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldScrapInHouseBillList");
            }

        }

        #endregion

        #region[模具报废入库单编辑时获取表头数据]
        [Route("Sc_MouldScrapInHouseBill/Sc_MouldScrapInHouseBillListCheckDetai")]
@@ -3388,11 +3440,11 @@
            try
            {
                DLL.ClsSc_MouldScrapInBill oBill = new DLL.ClsSc_MouldScrapInBill();
                List<Model.ClsSc_MouldStockBillMain> lsmain = new List<Model.ClsSc_MouldStockBillMain>();
                List<Models.ClsSc_MouldStockBillMain> lsmain = new List<Models.ClsSc_MouldStockBillMain>();
                msg2 = msg2.Replace("\\", "");
                msg2 = msg2.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillMain(msg2);
                foreach (Model.ClsSc_MouldStockBillMain oItem in lsmain)
                foreach (Models.ClsSc_MouldStockBillMain oItem in lsmain)
                {
                    if (refSav == "Add")
                    {
@@ -3480,10 +3532,10 @@
                msg3 = msg3.Replace("\\", "");
                msg3 = msg3.Replace("\n", "");  //\n
                //msg2 = msg2.Replace("'", "’");
                List<Model.ClsSc_MouldStockBillSub> ls = new List<Model.ClsSc_MouldStockBillSub>();
                List<Models.ClsSc_MouldStockBillSub> ls = new List<Models.ClsSc_MouldStockBillSub>();
                ls = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillSub(msg3);
                int i = 0;
                foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
                foreach (Models.ClsSc_MouldStockBillSub oItemSub in ls)
                {

                    i++;
@@ -3549,236 +3601,140 @@
        }
        #endregion

        #region [模具报废入库单删除功能]
        /// <summary>
        /// 模具报废入库单删除功能
        /// </summary>
        /// <returns></returns>
        [Route("Sc_MouldScrapInHouseBill/DeltetMouldScrapInHouseBill")]
        [HttpGet]
        public object DeltetMouldScrapInHouseBill(string HInterID)
        {
            //编辑权限
            //if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapInBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
            //{
            //    objJsonResult.code = "0";
            //    objJsonResult.count = 0;
            //    objJsonResult.Message = "无删除权限！";
            //    objJsonResult.data = null;
            //    return objJsonResult;
            //}

            string s = "";
            Int64 lngBillKey = 0;
            lngBillKey = DBUtility.ClsPub.isLong(HInterID);
            if (lngBillKey == 0)


        #region 模具报废入库单保存

        [Route("Sc_MouldScrapInHouseBill/SaveGetMouldScrapInHouseBillList_PDA")]
        [HttpPost]
        public object SaveGetMouldScrapInHouseBillList_PDA([FromBody] JObject msg)
        {
            var _value = msg["msg"].ToString();
            string msg1 = _value.ToString();
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();

            string UserName = "";

            ListModels oListModels = new ListModels();
            try
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "单据ID为空！";
                objJsonResult.data = null;
                return objJsonResult;
            }
            DAL.ClsSc_MouldScrapInBill oBill = new DAL.ClsSc_MouldScrapInBill();
            if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
            {
                if (oBill.omodel.HBillStatus > 1)
                DLL.ClsSc_MouldScrapInBill oBill = new DLL.ClsSc_MouldScrapInBill();
                List<Models.ClsSc_MouldStockBillMain> lsmain = new List<Models.ClsSc_MouldStockBillMain>();
                msg2 = msg2.Replace("\\", "");
                msg2 = msg2.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillMain(msg2);
                foreach (Models.ClsSc_MouldStockBillMain oItem in lsmain)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据当前处于不能删除状态,不能删除！";
                    objJsonResult.data = null;
                    return objJsonResult;
                    //单据号是否重复
                    if (BillNew0.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, BillOld0.omodel.HInterID))
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据号重复！不允许保存！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }

                    //oItem.HMaker = "";
                    UserName = oItem.HMaker;  //制单人
                    oItem.HBillType = "3831";
                    oItem.HBillSubType = "3831";
                    //oItem.HBillNo = "";    //单据号
                    //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));//  --日期
                    //oItem.HInnerBillNo = "";  //  --内部单据号
                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
                    oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
                    //oItem.HEquipID = 0;    //设备ID(Gy_EquipMent)
                    //oItem.HPeriod = 0;
                    //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));  //  --维修日期
                    //oItem.HCheckResult = "";     //验收结论--(正常，异常)
                    //oItem.HEmpID = 0;           //验收人(Gy_Employee)
                    //oItem.HManagerID = 0;      //负责人(Gy_Employee)
                    //oItem.HDeptID = 0;        //验收部门(Gy_Department)
                    //oItem.HExplanation = "";  //摘要(故障描述)  
                    //oItem.HRemark = "";       //备注

                    //oItem.HMainSourceInterID = oItem.HInterID;

                    //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
                    if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oBill.omodel = oItem;
                }
                if (oBill.omodel.HChecker != "")
                //子表体数据
 
                List<Models.ClsSc_MouldStockBillSub> ls = new List<Models.ClsSc_MouldStockBillSub>();
                ls = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillSub(msg2);
                int i = 0;
                foreach (Models.ClsSc_MouldStockBillSub oItemSub in ls)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据已经审核,不能删除！";
                    objJsonResult.data = null;
                    return objJsonResult;

                    i++;
                    oItemSub.HEntryID = i;

                    //oItemSub.HRepairCheckID = 0;   //验收项目ID
                    //oItemSub.HRepairCheckContent = ""; //验收内容
                    //oItemSub.HManagerID = 0;   //负责人ID
                    //oItemSub.HCloseMan = "";       //行关闭
                    oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
                    oItemSub.HCloseType = false;   //关闭类型
                    //oItemSub.HRemark = "";         //备注
                    oItemSub.HSourceInterID = 0;     // 源单主内码
                    oItemSub.HSourceEntryID = 0;   //源单子内码
                    //oItemSub.HSourceBillNo = "";  //源单单号
                    //oItemSub.HSourceBillType = ""; //源单类型
                    //oItemSub.HRelationQty = 0;     //关联数量
                    //oItemSub.HRelationMoney = 0;   //关联金额 
                    //oItemSub.HRepairID = 0;       //维修项目
                    //oItemSub.HRepairExplanation ="";   //维修要求
                    //oItemSub.HMoney = 0;        //维修费用
                    oBill.DetailColl.Add(oItemSub);

                }
                if (!DBUtility.Xt_BaseBillFun.Fun_AllowDeleteBill(BillOld0, ref s))
                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.omodel.HInterID == 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = s + "，不允许删除";
                    objJsonResult.data = null;
                    return objJsonResult;
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                }
                bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                if (IsDete)
                else
                {
                    bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {

                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            else
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "单据未找到";
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region [模具报废入库单审核、反审核]
        /// <summary>
        /// 
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="IsAudit">审核(0),反审核(1)</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Sc_MouldScrapInHouseBill/MouldScrapInHouseAudit")]
        [HttpGet]
        public object MouldScrapInHouseAudit(int HInterID, int IsAudit, string CurUserName)
        {
            string ModRightNameCheck = "Sc_MouldScrapInBill_Check";
            DBUtility.ClsPub.CurUserName = CurUserName;
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log(ModRightNameCheck, 1, true, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                string s = "";
                if (!DBUtility.Xt_BaseBillFun.Fun_AllowCheckBill(BillOld0, ref s))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = s + "，不允许审核";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                if (HInterID <= 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HInterID小于0！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                Int64 lngBillKey = 0;
                lngBillKey = DBUtility.ClsPub.isLong(HInterID);
                DLL.ClsSc_MouldScrapInBill oBill = new DLL.ClsSc_MouldScrapInBill();
                //查看是否已审核,关闭,作废
                if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
                {
                    if (oBill.omodel.HCloseMan.Trim() != "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据已关闭!不能再次审核！";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    if (oBill.omodel.HDeleteMan.Trim() != "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据已作废!不能再次审核！";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    if (IsAudit == 0)  //审核判断
                    {
                        if (oBill.omodel.HChecker.Trim() != "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据已审核!不能再次审核！";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                    if (IsAudit == 1) //反审核判断
                    {
                        if (oBill.omodel.HChecker.Trim() == "")
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据未审核!不需要反审核!";
                            objJsonResult.data = null;
                            return objJsonResult;
                        }
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                if (IsAudit == 0) //审核提交
                {
                    //审核提交
                    if (oBill.CheckBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
                    {
                        objJsonResult.code = "1";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "审核成功";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    else
                    {
                        objJsonResult.code = "1";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "审核失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                }
                if (IsAudit == 1) //反审核提交
                {
                    //反审核提交AbandonCheck
                    if (oBill.AbandonCheck(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
                    {
                        objJsonResult.code = "1";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "反审核成功";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    else
                    {
                        objJsonResult.code = "1";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "反审核失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                }
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
                objJsonResult.data = null;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }