增加 设备维修验收单查询、新增、修改、删除

YL

2021-06-03 daded597cfbb040d698af192594b0ad55b5208e5

 WebAPI/Controllers/Sc_CheckToolsRepairWorkBillController.cs

@@ -1497,8 +1497,8 @@
                {
                    //oItem.HMaker = "";
                    UserName = oItem.HMaker;  //制单人
                    oItem.HBillType = "3815";
                    oItem.HBillSubType = "3815";
                    oItem.HBillType = "3817";
                    oItem.HBillSubType = "3817";
                    //oItem.HBillNo = "";    //单据号
                    //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));//  --日期
                    //oItem.HInnerBillNo = "";  //  --内部单据号
@@ -1744,11 +1744,293 @@
        }
        #endregion


        #region 模具故障登记表 

        #region 模具故障登记表保存/编辑
        /// <summary>
        /// 保存模具维修单
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("Sc_MouldConkBookBill/SaveGetMouldConkBookBillList")]
        [HttpPost]
        public object SaveGetMouldConkBookBillList([FromBody] JObject msg)
        {
            var _value = msg["msg"].ToString();
            string msg1 = _value.ToString();
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();


            string UserName = "";
            ListModels oListModels = new ListModels();
            try
            {
                DAL.ClsSc_MouldConkBookBill oBill = new DAL.ClsSc_MouldConkBookBill();
                List<Model.ClsSc_MouldConkBookBillMain> lsmain = new List<Model.ClsSc_MouldConkBookBillMain>();
                msg2 = msg2.Replace("\\", "");
                msg2 = msg2.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_MouldConkBookBillMain(msg2);
                foreach (Model.ClsSc_MouldConkBookBillMain oItem in lsmain)
                {
                    //oItem.HMaker = "";
                    UserName = oItem.HMaker;  //制单人
                    oItem.HBillType = "3815";
                    oItem.HBillSubType = "3815";
                    //oItem.HBillNo = "";    //单据号
                    //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));//  --日期
                    //oItem.HInnerBillNo = "";  //  --内部单据号
                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
                    oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
                    //oItem.HEquipID = 0;    //设备ID(Gy_EquipMent)
                    //oItem.HPeriod = 0;
                    //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));  //  --维修日期
                    //oItem.HCheckResult = "";     //验收结论--(正常，异常)
                    //oItem.HEmpID = 0;           //验收人(Gy_Employee)
                    //oItem.HManagerID = 0;      //负责人(Gy_Employee)
                    //oItem.HDeptID = 0;        //验收部门(Gy_Department)
                    //oItem.HExplanation = "";  //摘要(故障描述)  
                    //oItem.HRemark = "";       //备注

                    //oItem.HMainSourceInterID = oItem.HInterID;

                    //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
                    if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oBill.omodel = oItem;
                }
                //表体数据
                //按 },{来拆分数组 //去掉【和】
                msg3 = msg3.Substring(1, msg3.Length - 2);
                msg3 = msg3.Replace("\\", "");
                msg3 = msg3.Replace("\n", "");  //\n
                //msg2 = msg2.Replace("'", "’");
                List<Model.ClsSc_MouldConkBookBillSub> ls = new List<Model.ClsSc_MouldConkBookBillSub>();
                ls = oListModels.getObjectByJson_Gy_MouldConkBookBillSub(msg3);
                int i = 0;
                foreach (Model.ClsSc_MouldConkBookBillSub oItemSub in ls)
                {

                    i++;
                    oItemSub.HEntryID = i;

                    //oItemSub.HRepairCheckID = 0;   //验收项目ID
                    //oItemSub.HRepairCheckContent = ""; //验收内容
                    //oItemSub.HManagerID = 0;   //负责人ID
                    //oItemSub.HCloseMan = "";       //行关闭
                    oItemSub.HCloseType = false;   //关闭类型
                    //oItemSub.HRemark = "";         //备注
                    oItemSub.HSourceInterID = 0;     // 源单主内码
                    oItemSub.HSourceEntryID = 0;   //源单子内码
                                                   //oItemSub.HSourceBillNo = "";  //源单单号
                                                   //oItemSub.HSourceBillType = ""; //源单类型
                                                   //oItemSub.HRelationQty = 0;     //关联数量
                                                   //oItemSub.HRelationMoney = 0;   //关联金额 
                                                   //oItemSub.HRepairID = 0;       //维修项目
                                                   //oItemSub.HRepairExplanation ="";   //维修要求

                    //oItemSub.HMoney = 0;        //维修费用
                    oBill.DetailColl.Add(oItemSub);

                }
                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.omodel.HInterID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                }
                else
                {
                    bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }
        #endregion

        #region[模具故障登记表编辑时获取表头数据]
        [Route("Sc_MouldConkBookBill/Sb_MouldConkBookBillListCheckDetai")]
        [HttpGet]
        public ApiResult<DataSet> Sb_MouldConkBookBillListCheckDetai(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();

            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldConkBookBillList  where hmainid= " + HID + " ", "h_v_Sc_MouldConkBookBillList");
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在维修单号" };

            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        #endregion

        #region[模具故障登记表编辑时获取表体数据]
        [Route("Sc_MouldConkBookBill/Sb_MouldConkBookBillListProjectDetai")]
        [HttpGet]
        public object Sb_MouldConkBookBillListProjectDetai(string sqlWhere)
        {
            DataSet ds;
            try
            {
                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (sqlWhere == null || sqlWhere.Equals(""))
                {

                    //ds = oCN.RunProcReturn("select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark   from Sc_MouldRepairCheckBillSub", "Sc_MouldRepairCheckBillSub");
                    ds = oCN.RunProcReturn("select HConkReasonID,故障原因代码 HConkReasonCode,故障原因 HHConkReasonName,故障原因描述 HConkExplanation,HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,备注 HRemark from h_v_Sc_MouldConkBookBillList_Edit", "h_v_Sc_MouldConkBookBillList_Edit");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                }
                else
                {

                    //string sql1 = "select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark  from Sc_MouldRepairCheckBillSub where 1 = 1 ";
                    string sql1 = "select HConkReasonID,故障原因代码 HConkReasonCode,故障原因 HHConkReasonName,故障原因描述 HConkExplanation,HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,备注 HRemark from h_v_Sc_MouldConkBookBillList_Edit where 1 = 1 ";
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldConkBookBillList_Edit");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + e.ToString();
                objJsonResult.data = null;
            }
            return objJsonResult;
        }
        #endregion

        #region [模具故障登记表删除功能]
        /// <summary>
        /// 模具维修单删除功能
        /// </summary>
        /// <returns></returns>
        [Route("Sc_MouldConkBookBill/DeltetMouldConkBookBill")]
        [HttpGet]
        public object DeltetMouldConkBookBill(string HInterID)
        {
            //编辑权限
            //if (!DBUtility.ClsPub.Security_Log("Sc_MouldConkBookBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
            //{
            //    objJsonResult.code = "0";
            //    objJsonResult.count = 0;
            //    objJsonResult.Message = "无删除权限！";
            //    objJsonResult.data = null;
            //    return objJsonResult;
            //}


            Int64 lngBillKey = 0;
            lngBillKey = DBUtility.ClsPub.isLong(HInterID);
            if (lngBillKey == 0)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "单据ID为空！";
                objJsonResult.data = null;
                return objJsonResult;
            }
            DAL.ClsSc_MouldConkBookBill oBill = new DAL.ClsSc_MouldConkBookBill();
            if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
            {
                if (oBill.omodel.HBillStatus > 1)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据当前处于不能删除状态,不能删除！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                if (oBill.omodel.HChecker != "")
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据已经审核,不能删除！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                if (IsDete)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                else
                {

                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
            }
            else
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "单据未找到";
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion
        #endregion


        #region 模具保养计划单

        #region 模具保养计划单 保存/编辑
        /// <summary>
        /// 保存模具维修单
        /// 保存模具保养计划单
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
@@ -1916,7 +2198,7 @@
                {
                    string sql1 = "select HMaterID,HUnitID,HQty,HQtyMust,HRemark   from Sc_MouldMaintainPlanBillSub where 1 = 1 ";
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "Sc_MouldRepairWorkBillSub");
                    ds = oCN.RunProcReturn(sql, "Sc_MouldMaintainPlanBillSub");
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
@@ -1933,7 +2215,6 @@
            return objJsonResult;
        }
        #endregion

        #region [模具保养计划单删除功能]
        /// <summary>
        /// 模具维修单删除功能
@@ -2015,12 +2296,197 @@
        #endregion

        #endregion


        #region 模具保养记录表

        #region 模具保养记录表 保存/编辑
        /// <summary>
        /// 保存模具维修单
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("Sc_MouldMaintainBill/SaveGetMouldMaintainBillList")]
        [HttpPost]
        public object SaveGetMouldMaintainBillList([FromBody] JObject msg)
        {
            var _value = msg["msg"].ToString();
            string msg1 = _value.ToString();
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();

        #region [模具保养计划单删除功能]

            string UserName = "";
            ListModels oListModels = new ListModels();
            try
            {
                DAL.ClsSc_MouldMaintainBill oBill = new DAL.ClsSc_MouldMaintainBill();
                List<Model.ClsSc_MouldMaintainBillMain> lsmain = new List<Model.ClsSc_MouldMaintainBillMain>();
                msg2 = msg2.Replace("\\", "");
                msg2 = msg2.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Sc_MouldMaintainBillMain(msg2);
                foreach (Model.ClsSc_MouldMaintainBillMain oItem in lsmain)
                {
                    //oItem.HMaker = "";
                    UserName = oItem.HMaker;  //制单人
                    oItem.HBillType = "3818";
                    oItem.HBillSubType = "3818";

                    //oItem.HInterID =0;
                    //oItem.HBillNo = "";
                    oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));//  --日期
                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
                    //oItem.HMakeDate = "";
                    //oItem.HYear = "";
                    //oItem.HPeriod = "";
                    //oItem.HRemark = "";
                    //oItem.HCycleUnit = "";
                    //oItem.HCheckCycle = "";
                    //oItem.HBeginDate = "";
                    //oItem.HEndDate = "";
                    //oItem.HInnerBillNo = "";
                    //oItem.HExplanation = "";

                    //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
                    if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oBill.omodel = oItem;
                }
                //表体数据
                //按 },{来拆分数组 //去掉【和】
                msg3 = msg3.Substring(1, msg3.Length - 2);
                msg3 = msg3.Replace("\\", "");
                msg3 = msg3.Replace("\n", "");  //\n
                //msg2 = msg2.Replace("'", "’");
                List<Model.ClsSc_MouldMaintainBillSub> ls = new List<Model.ClsSc_MouldMaintainBillSub>();
                ls = oListModels.getObjectByJson_Sc_MouldMaintainBillSub(msg3);
                int i = 0;
                foreach (Model.ClsSc_MouldMaintainBillSub oItemSub in ls)
                {

                    i++;
                    oItemSub.HEntryID = i;
                    //oItemSub.HCloseMan = "";       //行关闭
                    oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
                    oItemSub.HCloseType = false;   //关闭类型
                    //oItemSub.HRemark = "";         //备注
                    oItemSub.HSourceInterID = 0;     // 源单主内码
                    oItemSub.HSourceEntryID = 0;   //源单子内码
                    //oItemSub.HSourceBillNo = "";  //源单单号
                    //oItemSub.HSourceBillType = ""; //源单类型
                    oItemSub.HRelationQty = 0;     //关联数量
                    //oItemSub.HRelationMoney = 0;   //关联金额
                    //HMaterID = "";//配件代码
                    //HUnitID = "";//单位代码
                    //HQty = "";//实际用量
                    //HQtyMust = "";//单位用量
                    //HRemark = "";//备注
                   
                    oBill.DetailColl.Add(oItemSub);

                }
                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.omodel.HInterID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                }
                else
                {
                    bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }
        #endregion


        #region[模具保养记录表编辑时获取表头数据]
        [Route("Sc_MouldMaintainBill/Sc_MouldMaintainBillListCheckDetai")]
        [HttpGet]
        public ApiResult<DataSet> Sc_MouldMaintainBillListCheckDetai(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldMaintainBillList  where hmainid= " + HID + " ", "h_v_Sc_MouldMaintainBillList");
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在保养记录表" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        #endregion
        #region[模具保养记录表编辑时获取表题数据]
        [Route("Sc_MouldMaintainBill/Sc_MouldMaintainBillListProjectDetai")]
        [HttpGet]
        public object Sc_MouldMaintainBillListProjectDetai(string sqlWhere)
        {
            DataSet ds;
            try
            {
                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (sqlWhere == null || sqlWhere.Equals(""))
                {
                    ds = oCN.RunProcReturn("select HMaterID,HUnitID,HQty,HQtyMust,HRemark,HManagerID   from Sc_MouldMaintainBillSub", "Sc_MouldMaintainBillSub");
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                }
                else
                {
                    string sql1 = "select HMaterID,HUnitID,HQty,HQtyMust,HRemark,HManagerID   from Sc_MouldMaintainBillSub where 1 = 1 ";
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "Sc_MouldMaintainBillSub");
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + e.ToString();
                objJsonResult.data = null;
            }
            return objJsonResult;
        }
        #endregion


        #region [模具保养记录表删除功能]
        /// <summary>
        /// 模具维修单删除功能
        /// </summary>
@@ -2102,5 +2568,550 @@


        #endregion
        #region 模具点检记录表

        #region 模具点检记录表 保存/编辑
        /// <summary>
        /// 保存模具维修单
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("Sc_MouldDotCheckBill/SaveGetMouldDotCheckBillList")]
        [HttpPost]
        public object SaveGetMouldDotCheckBillList([FromBody] JObject msg)
        {
            var _value = msg["msg"].ToString();
            string msg1 = _value.ToString();
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();


            string UserName = "";
            ListModels oListModels = new ListModels();
            try
            {
                DAL.ClsSc_MouldDotCheckBill oBill = new DAL.ClsSc_MouldDotCheckBill();
                List<Model.ClsSc_MouldDotCheckBillMain> lsmain = new List<Model.ClsSc_MouldDotCheckBillMain>();
                msg2 = msg2.Replace("\\", "");
                msg2 = msg2.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Sc_MouldDotCheckBillMain(msg2);
                foreach (Model.ClsSc_MouldDotCheckBillMain oItem in lsmain)
                {
                    //oItem.HMaker = "";
                    UserName = oItem.HMaker;  //制单人
                    oItem.HBillType = "3821";
                    oItem.HBillSubType = "3821";

                    //oItem.HInterID =0;
                    //oItem.HBillNo = "";
                    oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));//  --日期
                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
                    //oItem.HMakeDate = "";
                    //oItem.HYear = "";
                    //oItem.HPeriod = "";
                    //oItem.HRemark = "";
                    //oItem.HCycleUnit = "";
                    //oItem.HCheckCycle = "";
                    //oItem.HBeginDate = "";
                    //oItem.HEndDate = "";
                    //oItem.HInnerBillNo = "";
                    //oItem.HExplanation = "";

                    //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
                    if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oBill.omodel = oItem;
                }
                //表体数据
                //按 },{来拆分数组 //去掉【和】
                msg3 = msg3.Substring(1, msg3.Length - 2);
                msg3 = msg3.Replace("\\", "");
                msg3 = msg3.Replace("\n", "");  //\n
                //msg2 = msg2.Replace("'", "’");
                List<Model.ClsSc_MouldDotCheckBillSub> ls = new List<Model.ClsSc_MouldDotCheckBillSub>();
                ls = oListModels.getObjectByJson_Sc_MouldDotCheckBillSub(msg3);
                int i = 0;
                foreach (Model.ClsSc_MouldDotCheckBillSub oItemSub in ls)
                {

                    i++;
                    oItemSub.HEntryID = i;
                    //oItemSub.HCloseMan = "";       //行关闭
                    oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
                    oItemSub.HCloseType = false;   //关闭类型
                    //oItemSub.HRemark = "";         //备注
                    oItemSub.HSourceInterID = 0;     // 源单主内码
                    oItemSub.HSourceEntryID = 0;   //源单子内码
                    //oItemSub.HSourceBillNo = "";  //源单单号
                    //oItemSub.HSourceBillType = ""; //源单类型
                    oItemSub.HRelationQty = 0;     //关联数量
                                                   //oItemSub.HRelationMoney = 0;   //关联金额
                                                   //HMaterID = "";//配件代码
                                                   //HUnitID = "";//单位代码
                                                   //HQty = "";//实际用量
                                                   //HQtyMust = "";//单位用量
                                                   //HRemark = "";//备注

                    oBill.DetailColl.Add(oItemSub);

                }
                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.omodel.HInterID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                }
                else
                {
                    bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }
        #endregion


        #region[模具点检记录表编辑时获取表头数据]
        [Route("Sc_MouldDotCheckBill/Sc_MouldDotCheckBillListCheckDetai")]
        [HttpGet]
        public ApiResult<DataSet> Sc_MouldDotCheckBillListCheckDetai(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldDotCheckBillList  where hmainid= " + HID + " ", "h_v_Sc_MouldDotCheckBillList");
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在点检记录表" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        #endregion
        #region[模具点检记录表编辑时获取表题数据]
        [Route("Sc_MouldDotCheckBill/Sc_MouldDotCheckBillListProjectDetai")]
        [HttpGet]
        public object Sc_MouldDotCheckBillListProjectDetai(string sqlWhere)
        {
            DataSet ds;
            try
            {
                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (sqlWhere == null || sqlWhere.Equals(""))
                {
                    ds = oCN.RunProcReturn("select HDotCheckItem,HDotCheckPart,HClaim,HRemark,HManagerID from Sc_MouldDotCheckBillSub", "Sc_MouldMaintainBillSub");
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                }
                else
                {
                    string sql1 = "select HDotCheckItem,HDotCheckPart,HClaim,HRemark,HManagerID from Sc_MouldDotCheckBillSub where 1 = 1 ";
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "Sc_MouldDotCheckBillSub");
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + e.ToString();
                objJsonResult.data = null;
            }
            return objJsonResult;
        }
        #endregion


        #region [模具点检记录表删除功能]
        /// <summary>
        /// 模具维修单删除功能
        /// </summary>
        /// <returns></returns>
        [Route("Sc_MouldDotCheckBill/DeltetSc_MouldDotCheckBill")]
        [HttpGet]
        public object DeltetSc_MouldDotCheckBill(string HInterID)
        {
            //编辑权限
            //if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
            //{
            //    objJsonResult.code = "0";
            //    objJsonResult.count = 0;
            //    objJsonResult.Message = "无删除权限！";
            //    objJsonResult.data = null;
            //    return objJsonResult;
            //}


            Int64 lngBillKey = 0;
            lngBillKey = DBUtility.ClsPub.isLong(HInterID);
            if (lngBillKey == 0)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "单据ID为空！";
                objJsonResult.data = null;
                return objJsonResult;
            }
            DAL.ClsSc_MouldDotCheckBill oBill = new DAL.ClsSc_MouldDotCheckBill();
            if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
            {
                if (oBill.omodel.HBillStatus > 1)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据当前处于不能删除状态,不能删除！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                if (oBill.omodel.HChecker != "")
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据已经审核,不能删除！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                if (IsDete)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                else
                {

                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
            }
            else
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "单据未找到";
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion


        #endregion
        #region 模具点检计划表

        #region 模具点检计划表 保存/编辑
        /// <summary>
        /// 保存模具维修单
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("Sc_MouldDotCheckPlanBill/SaveGetMouldDotCheckPlanBillList")]
        [HttpPost]
        public object SaveGetMouldDotCheckPlanBillList([FromBody] JObject msg)
        {
            var _value = msg["msg"].ToString();
            string msg1 = _value.ToString();
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();


            string UserName = "";
            ListModels oListModels = new ListModels();
            try
            {
                DAL.ClsSc_MouldDotCheckPlanBill oBill = new DAL.ClsSc_MouldDotCheckPlanBill();
                List<Model.ClsSc_MouldDotCheckPlanBillMain> lsmain = new List<Model.ClsSc_MouldDotCheckPlanBillMain>();
                msg2 = msg2.Replace("\\", "");
                msg2 = msg2.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Sc_MouldDotCheckPlanBillMain(msg2);
                foreach (Model.ClsSc_MouldDotCheckPlanBillMain oItem in lsmain)
                {
                    //oItem.HMaker = "";
                    UserName = oItem.HMaker;  //制单人
                    oItem.HBillType = "3821";
                    oItem.HBillSubType = "3821";

                    //oItem.HInterID =0;
                    //oItem.HBillNo = "";
                    oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));//  --日期
                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
                    //oItem.HMakeDate = "";
                    //oItem.HYear = "";
                    //oItem.HPeriod = "";
                    //oItem.HRemark = "";
                    //oItem.HCycleUnit = "";
                    //oItem.HCheckCycle = "";
                    //oItem.HBeginDate = "";
                    //oItem.HEndDate = "";
                    //oItem.HInnerBillNo = "";
                    //oItem.HExplanation = "";

                    //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
                    if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oBill.omodel = oItem;
                }
                //表体数据
                //按 },{来拆分数组 //去掉【和】
                msg3 = msg3.Substring(1, msg3.Length - 2);
                msg3 = msg3.Replace("\\", "");
                msg3 = msg3.Replace("\n", "");  //\n
                //msg2 = msg2.Replace("'", "’");
                List<Model.ClsSc_MouldDotCheckPlanBillSub> ls = new List<Model.ClsSc_MouldDotCheckPlanBillSub>();
                ls = oListModels.getObjectByJson_Sc_MouldDotCheckPlanBillSub(msg3);
                int i = 0;
                foreach (Model.ClsSc_MouldDotCheckPlanBillSub oItemSub in ls)
                {

                    i++;
                    oItemSub.HEntryID = i;
                    //oItemSub.HCloseMan = "";       //行关闭
                    oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
                    oItemSub.HCloseType = false;   //关闭类型
                    //oItemSub.HRemark = "";         //备注
                    oItemSub.HSourceInterID = 0;     // 源单主内码
                    oItemSub.HSourceEntryID = 0;   //源单子内码
                    //oItemSub.HSourceBillNo = "";  //源单单号
                    //oItemSub.HSourceBillType = ""; //源单类型
                    oItemSub.HRelationQty = 0;     //关联数量
                                                   //oItemSub.HRelationMoney = 0;   //关联金额
                                                   //HMaterID = "";//配件代码
                                                   //HUnitID = "";//单位代码
                                                   //HQty = "";//实际用量
                                                   //HQtyMust = "";//单位用量
                                                   //HRemark = "";//备注

                    oBill.DetailColl.Add(oItemSub);

                }
                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.omodel.HInterID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                }
                else
                {
                    bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }
        #endregion


        #region[模具点检计划表编辑时获取表头数据]
        [Route("Sc_MouldDotCheckPlanBill/Sc_MouldDotCheckPlanBillListCheckDetai")]
        [HttpGet]
        public ApiResult<DataSet> Sc_MouldDotCheckPlanBillListCheckDetai(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldDotCheckPlanBillList  where hmainid= " + HID + " ", "h_v_Sc_MouldDotCheckPlanBillList");
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在点检计划表" };
            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        #endregion
        #region[模具点检计划表编辑时获取表题数据]
        [Route("Sc_MouldDotCheckPlanBill/Sc_MouldDotCheckPlanBillListProjectDetai")]
        [HttpGet]
        public object Sc_MouldDotCheckPlanBillListProjectDetai(string sqlWhere)
        {
            DataSet ds;
            try
            {
                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (sqlWhere == null || sqlWhere.Equals(""))
                {
                    ds = oCN.RunProcReturn("select HDotCheckItem,HDotCheckPart,HClaim,HRemark,HManagerID from Sc_MouldDotCheckPlanBillSub", "Sc_MouldDotCheckPlanBillSub");
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                }
                else
                {
                    string sql1 = "select HDotCheckItem,HDotCheckPart,HClaim,HRemark,HManagerID from Sc_MouldDotCheckPlanBillSub where 1 = 1 ";
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "Sc_MouldDotCheckPlanBillSub");
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何计划！" + e.ToString();
                objJsonResult.data = null;
            }
            return objJsonResult;
        }
        #endregion


        #region [模具点检计划表删除功能]
        /// <summary>
        /// 模具维修单删除功能
        /// </summary>
        /// <returns></returns>
        [Route("Sc_MouldDotCheckPlanBill/DeltetSc_MouldDotCheckPlanBillBill")]
        [HttpGet]
        public object DeltetSc_MouldDotCheckPlanBillBill(string HInterID)
        {
            //编辑权限
            //if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
            //{
            //    objJsonResult.code = "0";
            //    objJsonResult.count = 0;
            //    objJsonResult.Message = "无删除权限！";
            //    objJsonResult.data = null;
            //    return objJsonResult;
            //}


            Int64 lngBillKey = 0;
            lngBillKey = DBUtility.ClsPub.isLong(HInterID);
            if (lngBillKey == 0)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "单据ID为空！";
                objJsonResult.data = null;
                return objJsonResult;
            }
            DAL.ClsSc_MouldDotCheckPlanBill oBill = new DAL.ClsSc_MouldDotCheckPlanBill();
            if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
            {
                if (oBill.omodel.HBillStatus > 1)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据当前处于不能删除状态,不能删除！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                if (oBill.omodel.HChecker != "")
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据已经审核,不能删除！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                if (IsDete)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                else
                {

                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
            }
            else
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "单据未找到";
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion


        #endregion

    }
}