MES-WEB-API.git

			@@ -4,9 +4,12 @@
			using System;
			using System.Collections.Generic;
			using System.Data;
			using System.IO;
			using System.Web;
			using System.Web.Http;
			using ViewAPI;
			using WebAPI.Models;
			using SyntacticSugar.constant;
			namespace WebAPI.Controllers
			{
			/**
			@@ -22,9 +25,11 @@
			public SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
			public DAL.ClsSc_ICMOBill BillOld = new DAL.ClsSc_ICMOBill();
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			Pub_Class.ClsXt_SystemParameter oSystemParameter = new Pub_Class.ClsXt_SystemParameter();

			public DAL.ClsSc_MouldScrapInBill BillNew0 = new DAL.ClsSc_MouldScrapInBill(); //模具报废入库对应单据类
			public DAL.ClsSc_MouldScrapInBill BillOld0 = new DAL.ClsSc_MouldScrapInBill(); //模具报废入库对应单据类
			string fileip = System.Configuration.ConfigurationManager.AppSettings["FileIP"];


			/// <summary>
			@@ -238,6 +243,63 @@
			}
			}

			/// <summary>
			/// 模具保养记录表分页列表
			/// </summary>
			/// <returns></returns>
			[Route("Sc_MouldMaintainBill/GetMouldMaintainBillListPage")]
			[HttpGet]
			public object GetMouldMaintainBillListPage(string sWhere, string user, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();

			if (!DBUtility.ClsPub.Security_Log("Sc_MouldMaintainBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}


			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldMaintainList " + page + "," + size + ",''", "h_p_Sc_MouldMaintainList");
			}
			else
			{
			sWhere = sWhere.Replace("'", "''");
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldMaintainList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldMaintainList");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#region sql语句


			@@ -350,6 +412,63 @@
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}


			/// <summary>
			/// 模具点检记录表分页列表
			/// </summary>
			/// <returns></returns>
			[Route("Sc_MouldDotCheckBill/GetMouldDotCheckBillListPage")]
			[HttpGet]
			public object GetMouldDotCheckBillListPage(string sWhere, string user, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldDotCheckBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldDotCheckBillList " + page + "," + size + ",''", "h_p_Sc_MouldDotCheckBillList");
			}
			else
			{
			sWhere = sWhere.Replace("'", "''");
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldDotCheckBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldDotCheckBillList");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}


			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			@@ -530,6 +649,63 @@
			}
			}

			/// <summary>
			/// 模具故障登记表分页列表
			/// </summary>
			/// <returns></returns>
			[Route("Sc_MouldConkBookBill/GetMouldConkBookBillListPage")]
			[HttpGet]
			public object GetMouldConkBookBillListPage(string sWhere, string user, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldConkBookBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldConkBookBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldConkBookBillList");
			}
			else
			{
			sWhere = sWhere.Replace("'", "''");
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldConkBookBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldConkBookBillList");
			}


			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}


			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#region 器具故障记录统计分析
			/// <summary>
			/// 器具维修记录统计分析列表
			@@ -602,6 +778,49 @@
			}
			#endregion

			#region 器具寿命耗用分析报表
			[Route("Sc_MouldRepairInBillList/Get_Sc_MouldLifeUsePicReport")]
			[HttpGet]
			public object Get_Sc_MouldLifeUsePicReport(string sWhere)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("select * from h_v_Sc_MouldLifeUsePicReport order by 月份 desc", "h_v_Sc_MouldLifeUsePicReport");
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldLifeUsePicReport where 1 = 1 ";
			string sql = sql1 + sWhere + " order by 日期 ";
			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldLifeUsePicReport");
			}
			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion


			/// <summary>
			@@ -637,6 +856,62 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			/// <summary>
			/// 模具维修验收单分页列表
			/// </summary>
			/// <returns></returns>
			[Route("Sc_MouldRepairCheckBill/GetMouldRepairCheckBillListPage")]
			[HttpGet]
			public object GetMouldRepairCheckBillListPage(string sWhere, string user, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sb_EquipRepairCheckBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}


			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldRepairCheckBillList " + page + "," + size + ",''", "h_p_Sc_MouldRepairCheckBillList");
			}
			else
			{
			sWhere = sWhere.Replace("'", "''");
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldRepairCheckBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldRepairCheckBillList");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.list = columnNameList;
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			@@ -720,81 +995,7 @@
			//}
			#endregion

			/// <summary>
			/// 模具维修工单表列表
			/// </summary>
			/// <returns></returns>
			[Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBillList")]
			[HttpGet]
			public object GetMouldRepairWorkBillList(string sWhere,string user)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ds = Sc_MouldRepairWorkBillList_s(sWhere);

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			//}
			//else
			//{
			//objJsonResult.code = "0";
			//objJsonResult.count = 0;
			//objJsonResult.Message = "无数据";
			//objJsonResult.data = null;
			//return objJsonResult;
			//}
			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#region sql语句


			public static DataSet Sc_MouldRepairWorkBillList_s(string sWhere)
			{
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList where 1=1 " + sWhere+ " order by hmainid desc", "h_v_Sc_MouldRepairWorkBillList");
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList where 1 = 1 ";
			string sql = sql1 + sWhere + "order by hmainid desc";
			return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList");
			}
			}
			#endregion



			/// <summary>
			@@ -1244,8 +1445,6 @@
			}
			//==================================================================================

			//更新及时库存表减少调入库存,增加调出库存
			ds = oCN.RunProcReturn("exec h_KF_UPDateICinventory_Move '"+ oBill.omodel.HInterID + "','"+ oBill.omodel.HBillType+ "','1'", "h_KF_UPDateICinventory_Move");

			//审核单据
			if (!oBill.CheckBill(oBill.omodel.HInterID, oBill.omodel.HBillNo, "h_p_Kf_MoveStockBill_AfterCheckCtrl", user, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			@@ -1297,9 +1496,6 @@
			return objJsonResult;
			}
			//===========================================================

			//更新及时库存表增加调入库存,减少调出库存
			ds = oCN.RunProcReturn("exec h_KF_UPDateICinventory_Move '" + oBill.omodel.HInterID + "','" + oBill.omodel.HBillType + "','2'", "h_KF_UPDateICinventory_Move");

			//反审核单据
			if (oBill.AbandonCheck(oBill.omodel.HInterID, oBill.omodel.HBillNo, "h_p_Kf_MoveStockBill_AfterUnCheckCtrl", user, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			@@ -1583,6 +1779,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_MoveStockBillQuery", 1, false, user))
			{
			@@ -1602,11 +1799,18 @@
			string sql = "select * from h_v_IF_MoveStockBillList where 1=1 " + sWhere+ "order by hmainid desc";
			ds = oCN.RunProcReturn(sql, "h_v_IF_MoveStockBillList");
			}
			foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
			{
			Type dataType = col.DataType; //获取当前数据类型传入自定义变量datadataType
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接 // 将列名和数据类型信息拼接成一个JSON格式的字符串
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;

			}
			@@ -1775,6 +1979,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_SellOutBillQuery", 1, false, user))
			{
			@@ -1786,6 +1991,12 @@
			}

			ds = Sc_GetSellOutBillList(sWhere);
			foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
			{
			Type dataType = col.DataType; //获取当前数据类型传入自定义变量datadataType
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接 // 将列名和数据类型信息拼接成一个JSON格式的字符串
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			@@ -1793,6 +2004,7 @@
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			//}
			//else
			@@ -1813,6 +2025,66 @@
			return objJsonResult;
			}
			}

			#region 销售出库单列表-分页
			/// <summary>
			/// 销售出库单列表
			/// </summary>
			/// <returns></returns>
			[Route("Kf_SellOutBill/GetSellOutBillList_byPage")]
			[HttpGet]
			public object GetSellOutBillList_byPage(string sWhere, string user, string Organization, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_SellOutBillQuery", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有查询权限!";
			objJsonResult.data = null;
			return objJsonResult;
			}

			sWhere = sWhere.Replace("'", "''");

			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_IF_SellOutBillList " + page + "," + size + ",'" + Organization + "'," + "''", "h_p_IF_SellOutBillList");
			}
			else
			{
			ds = oCN.RunProcReturn("exec h_p_IF_SellOutBillList " + page + "," + size + ",'" + Organization + "','" + sWhere + "'", "h_p_IF_SellOutBillList");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.list = columnNameList;
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			/// <summary>
			///销售出库单删除功能
			/// </summary>
			@@ -1860,7 +2132,7 @@
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:删除前判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;
			@@ -1869,7 +2141,7 @@
			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			@@ -1894,11 +2166,11 @@
			oCN.RunProc("exec h_p_Xs_UpDateRelation_SeOutStockToPOStockIn_Delete " + HInterID);


			//oCN.RunProc("Delete From Kf_ICStockBillMain where HInterID = " + HInterID);
			//oCN.RunProc("Delete From Kf_ICStockBillSub where HInterID = " + HInterID);
			oCN.RunProc("Delete From Kf_ICStockBillMain where HInterID = " + HInterID);
			oCN.RunProc("Delete From Kf_ICStockBillSub where HInterID = " + HInterID);

			string sql = "exec h_p_WMS_ICStockBillAndWMS_Delete " + BillOld.omodel.HInterID + ",'" + BillOld.omodel.HBillNo + "','1205'";
			oCn.RunProc(sql);
			//string sql = "exec h_p_WMS_ICStockBillAndWMS_Delete " + BillOld.omodel.HInterID + ",'" + BillOld.omodel.HBillNo + "','1205'";
			//oCn.RunProc(sql);

			//删除后控制==================================================================================
			string sql2 = "exec h_p_Kf_SellOutBill_AfterDelCtrl " + BillOld.omodel.HInterID + ",'" + BillOld.omodel.HBillNo + "','" + user + "'";
			@@ -1907,7 +2179,7 @@
			{
			s = "删除后判断失败，请与网络管理人员联系";
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:" + s;
			objJsonResult.data = null;
			oCN.RollBack();
			@@ -1917,7 +2189,7 @@
			{
			s = ds.Tables[0].Rows[0]["HRemark"].ToString();
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:" + s;
			objJsonResult.data = null;
			oCN.RollBack();
			@@ -2200,6 +2472,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_OtherOutBillQuery", 1, false, user))
			{
			@@ -2219,13 +2492,21 @@
			string sql = "select * from h_v_Kf_OtherOutBillList where 1 = 1 " + sWhere+ " order by hmainid desc";
			ds = oCN.RunProcReturn(sql, "h_v_Kf_OtherOutBillList");
			}

			foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
			{
			Type dataType = col.DataType; //获取当前数据类型传入自定义变量datadataType
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接 // 将列名和数据类型信息拼接成一个JSON格式的字符串
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}
			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)


			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.data = ds.Tables[0];//代码将第一个DataTable（索引为0）赋值给objJsonResult的data属性
			objJsonResult.list = columnNameList;//将columnNameList赋值给objJsonResult的list属性
			return objJsonResult;
			//}
			//else
			@@ -3642,6 +3923,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_OtherInBillQuery", 1, false, user))
			{
			@@ -3661,13 +3943,19 @@
			string sql = "select * from h_v_Kf_OtherInBillList where 1 = 1 " + sWhere+ " order by hmainid desc";
			ds = oCN.RunProcReturn(sql, "h_v_Kf_OtherInBillList");
			}

			foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
			{
			Type dataType = col.DataType; //获取当前数据类型传入自定义变量datadataType
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接 // 将列名和数据类型信息拼接成一个JSON格式的字符串
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}
			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.data = ds.Tables[0];//代码将第一个DataTable（索引为0）赋值给objJsonResult的data属性
			objJsonResult.list = columnNameList;//将columnNameList赋值给objJsonResult的list属性
			return objJsonResult;
			//}
			//else
			@@ -3834,6 +4122,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_EntrustInBillQuery", 1, false, user))
			{
			@@ -3852,13 +4141,20 @@
			string sql = "select * from h_v_Kf_EntrustInBillList where 1 = 1 " + sWhere+ " order by hmainid desc";
			ds = oCN.RunProcReturn(sql, "h_v_Kf_EntrustInBillList");
			}
			foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
			{
			Type dataType = col.DataType; //获取当前数据类型传入自定义变量datadataType
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接 // 将列名和数据类型信息拼接成一个JSON格式的字符串
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.data = ds.Tables[0];//代码将第一个DataTable（索引为0）赋值给objJsonResult的data属性
			objJsonResult.list = columnNameList;//将columnNameList赋值给objJsonResult的list属性
			return objJsonResult;
			//}
			//else
			@@ -3910,6 +4206,7 @@

			#endregion

			#region 模具维修记录单

			#region 模具维修记录单保存/编辑
			/// <summary>
			@@ -3950,7 +4247,7 @@
			lsmain = oListModels.getObjectByJson_Gy_MouldRepairWorkBillMain(msg2);
			foreach (Model.ClsSb_MouldRepairWorkBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			oItem.HMaker = msg4;
			UserName = msg4; //制单人
			oItem.HBillType = "3807";
			oItem.HBillSubType = "3807";
			@@ -4369,6 +4666,309 @@
			}
			#endregion

			#region 模具维修记录单保存/编辑
			/// <summary>
			/// 保存模具维修单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			[Route("Sb_MouldRepairWorkBill/SaveGetMouldRepairWorkBill_PDA")]
			[HttpPost]
			public object SaveGetMouldRepairWorkBill_PDA([FromBody] JObject msg)
			{
			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();


			string UserName = "";
			ListModels oListModels = new ListModels();
			try
			{
			if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Edit", 1, false, msg4))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			DAL.ClsSb_MouldRepairWorkBill oBill = new DAL.ClsSb_MouldRepairWorkBill();
			List<Model.ClsSb_MouldRepairWorkBillMain> lsmain = new List<Model.ClsSb_MouldRepairWorkBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldRepairWorkBillMain(msg2);
			foreach (Model.ClsSb_MouldRepairWorkBillMain oItem in lsmain)
			{
			oItem.HMaker = msg4;
			UserName = msg4; //制单人
			oItem.HBillType = "3807";
			oItem.HBillSubType = "3807";
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			oBill.omodel = oItem;
			}
			//表体数据
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Model.ClsSb_MouldRepairWorkBillSub> ls = new List<Model.ClsSb_MouldRepairWorkBillSub>();
			ls = oListModels.getObjectByJson_Gy_MouldRepairWorkBillSub(msg3);
			int i = 0;
			foreach (Model.ClsSb_MouldRepairWorkBillSub oItem in ls)
			{

			i++;
			oItem.HEntryID = i;
			oItem.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItem.HCloseType = false; //关闭类型
			oItem.HRelationQty = 0; //关联数量
			oBill.DetailColl.Add(oItem);

			}


			//保存
			//保存完毕后处理
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			}
			if (bResult)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			#endregion

			#region 模具维修记录表列表
			[Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBillList")]
			[HttpGet]
			public object GetMouldRepairWorkBillList(string sWhere, string user)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ds = Sc_MouldRepairWorkBillList_s(sWhere);

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			//}
			//else
			//{
			//objJsonResult.code = "0";
			//objJsonResult.count = 0;
			//objJsonResult.Message = "无数据";
			//objJsonResult.data = null;
			//return objJsonResult;
			//}
			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			public static DataSet Sc_MouldRepairWorkBillList_s(string sWhere)
			{
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList where 1=1 " + sWhere + " order by hmainid desc", "h_v_Sc_MouldRepairWorkBillList");
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList where 1 = 1 ";
			string sql = sql1 + sWhere + "order by hmainid desc";
			return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList");
			}
			}
			#endregion

			#region 模具维修记录表分页列表
			[Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBillListPage")]
			[HttpGet]
			public object GetMouldRepairWorkBillListPage(string sWhere, string user, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldRepairWorkBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldRepairWorkBillList");
			}
			else
			{
			sWhere = sWhere.Replace("'", "''");
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldRepairWorkBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldRepairWorkBillList");
			}


			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}


			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#endregion

			#region 模具维修记录表列表
			[Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBill_PDA")]
			[HttpGet]
			public object GetMouldRepairWorkBill_PDA(string sWhere, string user)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ds = Sc_MouldRepairWorkBillList_PDA(sWhere);

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;

			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			public static DataSet Sc_MouldRepairWorkBillList_PDA(string sWhere)
			{
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList_PDA where 1=1 " + sWhere + " order by hmainid desc", "h_v_Sc_MouldRepairWorkBillList_PDA");
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList_PDA where 1 = 1 ";
			string sql = sql1 + sWhere + "order by hmainid desc";
			return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList_PDA");
			}
			}
			#endregion

			#endregion

			#region 器具维修记录统计分析
			/// <summary>
			/// 器具维修记录统计分析列表
			@@ -4421,7 +5021,7 @@
			}
			#endregion


			#region 模具验收单

			#region 模具维修验收单保存/编辑
			/// <summary>
			@@ -4598,7 +5198,7 @@
			{

			//ds = oCN.RunProcReturn("select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark from Sc_MouldRepairCheckBillSub", "Sc_MouldRepairCheckBillSub");
			ds = oCN.RunProcReturn("select HRepairCheckID,验收项目代码 HRepairCheckCode,验收项目 HRepairCheckName,验收内容 HRepairCheckContent,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,备注 HRemark from h_v_Sc_MouldRepairCheckBillList_Edit", "h_v_Sc_MouldRepairCheckBillList_Edit");
			ds = oCN.RunProcReturn("select * from h_v_Sc_MouldRepairCheckBillList_Edit", "h_v_Sc_MouldRepairCheckBillList_Edit");

			objJsonResult.code = "0";
			objJsonResult.count = 1;
			@@ -4609,7 +5209,7 @@
			{

			//string sql1 = "select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark from Sc_MouldRepairCheckBillSub where 1 = 1 ";
			string sql1 = "select HRepairCheckID,验收项目代码 HRepairCheckCode,验收项目 HRepairCheckName,验收内容 HRepairCheckContent,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,备注 HRemark from h_v_Sc_MouldRepairCheckBillList_Edit where 1 = 1 ";
			string sql1 = "select * from h_v_Sc_MouldRepairCheckBillList_Edit where 1 = 1 ";
			string sql = sql1 + sqlWhere;
			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldRepairCheckBillList_Edit");

			@@ -4710,6 +5310,7 @@
			}
			#endregion

			#endregion

			#region 模具故障登记表

			@@ -4759,19 +5360,6 @@
			//oItem.HInnerBillNo = ""; // --内部单据号
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			//oItem.HPeriod = 0;
			//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			//oItem.HCheckResult = ""; //验收结论--(正常，异常)
			//oItem.HEmpID = 0; //验收人(Gy_Employee)
			//oItem.HManagerID = 0; //负责人(Gy_Employee)
			//oItem.HDeptID = 0; //验收部门(Gy_Department)
			//oItem.HExplanation = ""; //摘要(故障描述)
			//oItem.HRemark = ""; //备注

			//oItem.HMainSourceInterID = oItem.HInterID;

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			@@ -4797,22 +5385,11 @@
			i++;
			oItemSub.HEntryID = i;

			//oItemSub.HRepairCheckID = 0; //验收项目ID
			//oItemSub.HRepairCheckContent = ""; //验收内容
			//oItemSub.HManagerID = 0; //负责人ID
			//oItemSub.HCloseMan = ""; //行关闭

			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注

			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			//oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//oItemSub.HRepairID = 0; //维修项目
			//oItemSub.HRepairExplanation =""; //维修要求

			//oItemSub.HMoney = 0; //维修费用
			oBill.DetailColl.Add(oItemSub);

			}
			@@ -4821,7 +5398,6 @@
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			}
			else
			@@ -4833,7 +5409,6 @@
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			return objJsonResult;
			}
			@@ -4998,6 +5573,68 @@
			}
			}
			#endregion

			#region 模具故障登记单_PDA
			[Route("Sc_MouldConkBookBill/GetMouldConkBookBillList_PDA")]
			[HttpGet]
			public object GetMouldConkBookBillList_PDA(string sWhere, string user)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldConkBookBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ds = Sc_MouldConkBookBillList_PDA(sWhere);

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			public static DataSet Sc_MouldConkBookBillList_PDA(string sWhere)
			{
			DataSet ds;
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldConkBookBillList_PDA where 1=1 " + sWhere + " order by hmainid desc", "h_v_Sc_MouldConkBookBillList_PDA");
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldConkBookBillList_PDA where 1 = 1 ";
			string sql = sql1 + sWhere + "order by 日期 desc";
			ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldConkBookBillList_PDA");
			}
			return ds;
			}
			#endregion

			#endregion


			@@ -5020,7 +5657,7 @@
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();
			string msg5 = sArray[3].ToString();

			string msg6 = sArray[4].ToString();

			string UserName = "";
			ListModels oListModels = new ListModels();
			@@ -5054,6 +5691,7 @@
			//oItem.HBillNo = "";
			oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HPeriod = DBUtility.ClsPub.isLong(DateTime.Now.Month);
			//oItem.HMakeDate = "";
			//oItem.HYear = "";
			//oItem.HPeriod = "";
			@@ -5140,6 +5778,32 @@
			oBill.DetailColl.Add(oItemSub);

			}

			//表体数据
			//按 },{来拆分数组 //去掉【和】
			//如果是编辑就允许保存,否则不允许
			if (oBill.omodel.HInterID != 0)
			{
			msg6 = msg6.Substring(1, msg6.Length - 2);
			msg6 = msg6.Replace("\\", "");
			msg6 = msg6.Replace("\n", "");
			List<Model.ClsSc_MouldMaintainPlanBillSub_Plan> lss = new List<Model.ClsSc_MouldMaintainPlanBillSub_Plan>();
			lss = oListModels.getObjectByJson_Sc_MouldMaintainPlanBillSub_Plan(msg6);
			int l = 0;
			foreach (Model.ClsSc_MouldMaintainPlanBillSub_Plan oItem in lss)
			{

			l++;
			oItem.HEntryID = l;
			oItem.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItem.HCloseType = false; //关闭类型
			oItem.HSourceInterID = 0; // 源单主内码
			oItem.HSourceEntryID = 0; //源单子内码
			oItem.HRelationQty = 0; //关联数量
			oBill.DetailCol2.Add(oItem);
			}
			}

			//保存
			//保存完毕后处理
			bool bResult;
			@@ -5206,7 +5870,7 @@
			{
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			//获取保养项目编辑数据
			string sql = "select 保养项目ID HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,负责人ID,负责人代码 HManagerNumber,负责人名称 HManagerName,子备注2 HRemark,HMouldMaintainRuleID,HEquipDotCheckNo from h_v_Sc_MouldMaintainPlanBillSub_Item where 1 = 1 " + sqlWhere + "";
			string sql = "select 保养项目ID HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,负责人ID HManagerID,负责人代码 HManagerNumber,负责人名称 HManagerName,子备注2 HRemark,HMouldMaintainRuleID,HEquipDotCheckNo from h_v_Sc_MouldMaintainPlanBillSub_Item where 1 = 1 " + sqlWhere + "";

			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldMaintainPlanBillSub_Item");
			//获取配件项目编辑数据
			@@ -5455,7 +6119,7 @@
			foreach (Model.ClsSc_MouldMaintainBillMain oItem in lsmain)
			{
			UserName = oItem.HMaker; //制单人
			DBUtility.ClsPub.CurUserName = UserName;
			DBUtility.ClsPub.CurUserName = msg5;
			oItem.HBillType = "3819";
			oItem.HBillSubType = "3819";

			@@ -5585,6 +6249,142 @@
			}
			#endregion

			#region 模具保养记录表保存/编辑PDA
			/// <summary>
			/// 保存模具维修单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			[Route("Sc_MouldMaintainBill/SaveGetMouldMaintainBillListPDA")]
			[HttpPost]
			public object SaveGetMouldMaintainBillListPDA([FromBody] JObject msg)
			{
			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg5 = sArray[2].ToString();

			string UserName = "";
			ListModels oListModels = new ListModels();
			try
			{
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldMaintainBill_Edit", 1, false, msg5))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			DAL.ClsSc_MouldMaintainBill oBill = new DAL.ClsSc_MouldMaintainBill();
			List<Model.ClsSc_MouldMaintainBillMain> lsmain = new List<Model.ClsSc_MouldMaintainBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Sc_MouldMaintainBillMain(msg2);
			foreach (Model.ClsSc_MouldMaintainBillMain oItem in lsmain)
			{
			UserName = oItem.HMaker; //制单人
			DBUtility.ClsPub.CurUserName = UserName;
			oItem.HBillType = "3819";
			oItem.HBillSubType = "3819";

			//oItem.HInterID =0;
			//oItem.HBillNo = "";
			oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			//oItem.HMakeDate = "";
			//oItem.HYear = "";
			//oItem.HPeriod = "";
			//oItem.HRemark = "";
			//oItem.HCycleUnit = "";
			//oItem.HCheckCycle = "";
			//oItem.HBeginDate = "";
			//oItem.HEndDate = "";
			//oItem.HInnerBillNo = "";
			//oItem.HExplanation = "";

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			oBill.omodel = oItem;
			}
			//保养项表体数据
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Model.ClsSc_MouldMaintainRuleBillSub_Item> ls = new List<Model.ClsSc_MouldMaintainRuleBillSub_Item>();
			ls = oListModels.getObjectByJson_Sc_MouldMaintainRuleBillSub_Item(msg3);
			int i = 0;
			foreach (Model.ClsSc_MouldMaintainRuleBillSub_Item oItemSub in ls)
			{

			i++;
			oItemSub.HEntryID = i;
			//oItemSub.HCloseMan = ""; //行关闭
			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			oItemSub.HRelationQty = 0; //关联数量
			oBill.DetailCol.Add(oItemSub);

			}

			//保存
			//保存完毕后处理
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			}
			if (bResult)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			#endregion

			#region[模具保养记录表编辑时获取表头数据]
			[Route("Sc_MouldMaintainBill/Sc_MouldMaintainBillListCheckDetai")]
			[HttpGet]
			@@ -5660,7 +6460,7 @@
			}
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			//获取保养项目编辑数据
			string sql = "select HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目名称 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,HManagerID,负责人代码 HManagerNumber,负责人 HManagerName,表体备注 HRemark from h_v_Sc_MouldMaintainBillListItem where 1 = 1 " + Swhere + "";
			string sql = "select HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目名称 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,HManagerID,负责人代码 HManagerNumber,负责人 HManagerName,表体备注 HRemark,保养结果 HMaintainResult from h_v_Sc_MouldMaintainBillListItem where 1 = 1 " + Swhere + "";
			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldMaintainBillListItem");
			//获取配件项目编辑数据
			string sql1 = "select HMaterID, 配件代码 HMaterNumber,配件名称 HMaterName,规格型号 HMaterSpec,HUnitID,单位代码 HUnitNumber,单位名称 HUnitName,实际用量 HQty,标准用量 HQtyMust,HManagerID,负责人代码 HManagerNumber,负责人 HManagerName,表体备注 HRemark from h_v_Sc_MouldMaintainBillList where 1 = 1 " + Swhere + "";
			@@ -6315,8 +7115,6 @@
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();
			//string msg5 = sArray[3].ToString();


			string UserName = "";
			ListModels oListModels = new ListModels();
			@@ -6337,28 +7135,14 @@
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Sc_MouldDotCheckPlanBillMain(msg2);
			foreach (Model.ClsSc_MouldDotCheckPlanBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			{
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3820";
			oItem.HBillSubType = "3820";

			//oItem.HInterID =0;
			//oItem.HBillNo = "";

			oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			//oItem.HMakeDate = "";
			//oItem.HYear = "";
			//oItem.HPeriod = "";
			//oItem.HRemark = "";
			//oItem.HCycleUnit = "";
			//oItem.HCheckCycle = "";
			//oItem.HBeginDate = "";
			//oItem.HEndDate = "";
			//oItem.HInnerBillNo = "";
			//oItem.HExplanation = "";

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);

			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			@@ -6383,7 +7167,7 @@

			i++;
			oItemSub.HEntryID = i;
			//oItemSub.HCloseMan = ""; //行关闭

			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			@@ -6391,43 +7175,10 @@
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//HMaterID = "";//配件代码
			//HUnitID = "";//单位代码
			//HQty = "";//实际用量
			//HQtyMust = "";//单位用量
			//HRemark = "";//备注
			oItemSub.HRelationQty = 0; //关联数量

			oBill.DetailColl.Add(oItemSub);

			}

			////配件项表体数据
			////按 },{来拆分数组 //去掉【和】
			//msg5 = msg5.Substring(1, msg5.Length - 2);
			//msg5 = msg5.Replace("\\", "");
			//msg5 = msg5.Replace("\n", ""); //\n
			// //msg2 = msg2.Replace("'", "’");
			//List<Model.ClsSc_MouldDotCheckPlanBillSub_Item> ls1 = new List<Model.ClsSc_MouldDotCheckPlanBillSub_Item>();
			//ls1 = oListModels.getObjectByJson_Sc_MouldDotCheckPlanBillSub_Item(msg5);
			//int j = 0;
			//foreach (Model.ClsSc_MouldDotCheckPlanBillSub_Item oItemSub in ls1)
			//{

			// j++;
			// oItemSub.HEntryID = j;
			// //oItemSub.HCloseMan = ""; //行关闭
			// oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			// oItemSub.HCloseType = false; //关闭类型

			// oItemSub.HSourceInterID = 0; // 源单主内码
			// oItemSub.HSourceEntryID = 0; //源单子内码

			// oItemSub.HRelationQty = 0; //关联数量
			// oBill.DetailCol.Add(oItemSub);
			//}

			}
			//保存
			//保存完毕后处理
			bool bResult;
			@@ -6741,7 +7492,7 @@
			return objJsonResult;
			}
			//得到信息
			ds = oCN.RunProcReturn("select top 1 * from Gy_MouldFileMain where HNumber= '" + HBarCode + "'", "Gy_MouldFileMain");
			ds = oCN.RunProcReturn("select top 1 * from Gy_MouldFileMain where HBarCode= '" + HBarCode + "'", "Gy_MouldFileMain");
			//写入信息
			if (ds == null \|\| ds.Tables[0].Rows.Count == 0)
			{
			@@ -6843,7 +7594,208 @@
			}
			#endregion

			#region 模具报废入库单保存/编辑
			#region 模具报废入库单保存/编辑 20240702作废
			/// <summary>
			/// 保存模具报废入库单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			//[Route("Sc_MouldScrapInHouseBill/SaveGetMouldScrapInHouseBillList")]
			//[HttpPost]
			//public object SaveGetMouldScrapInHouseBillList([FromBody] JObject msg)
			//{
			// var _value = msg["msg"].ToString();
			// string msg1 = _value.ToString();
			// string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			// string msg2 = sArray[0].ToString();
			// string msg3 = sArray[1].ToString();
			// string refSav = sArray[2].ToString();
			// string msg4 = sArray[3].ToString();

			// string UserName = "";
			// string s = "";
			// ListModels oListModels = new ListModels();
			// try
			// {
			// //编辑权限
			// if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapRequestBill_Edit", 1, false, msg4))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "无保存权限！";
			// objJsonResult.data = null;
			// return objJsonResult;
			// }

			// DLL.ClsSc_MouldScrapInBill oBill = new DLL.ClsSc_MouldScrapInBill();
			// List<Models.ClsSc_MouldStockBillMain> lsmain = new List<Models.ClsSc_MouldStockBillMain>();
			// msg2 = msg2.Replace("\\", "");
			// msg2 = msg2.Replace("\n", ""); //\n
			// lsmain = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillMain(msg2);
			// foreach (Models.ClsSc_MouldStockBillMain oItem in lsmain)
			// {
			// if (refSav == "Add")
			// {
			// //单据号是否重复
			// if (BillNew0.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, BillOld0.omodel.HInterID))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "单据号重复！不允许保存！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// if (refSav == "Update")
			// {
			// if (BillOld0.ShowBill(oItem.HInterID, ref s) == false)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "此单据有误！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// //判断是否可编辑
			// if (BillOld0.omodel.HChecker != "" && BillOld0.omodel.HChecker != null)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "此单据已经被审核，不允许修改！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// if (BillOld0.omodel.HBillStatus > 1)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "此单据处于不可编辑状态，不允许修改！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// if (!DBUtility.Xt_BaseBillFun.Fun_AllowEditBill(BillOld0, ref s))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = s + "，不允许修改";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// //oItem.HMaker = "";
			// UserName = oItem.HMaker; //制单人
			// oItem.HBillType = "3831";
			// oItem.HBillSubType = "3831";
			// //oItem.HBillNo = ""; //单据号
			// //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			// //oItem.HInnerBillNo = ""; // --内部单据号
			// oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			// oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			// //oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			// //oItem.HPeriod = 0;
			// //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			// //oItem.HCheckResult = ""; //验收结论--(正常，异常)
			// //oItem.HEmpID = 0; //验收人(Gy_Employee)
			// //oItem.HManagerID = 0; //负责人(Gy_Employee)
			// //oItem.HDeptID = 0; //验收部门(Gy_Department)
			// //oItem.HExplanation = ""; //摘要(故障描述)
			// //oItem.HRemark = ""; //备注

			// //oItem.HMainSourceInterID = oItem.HInterID;

			// //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			// if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// oBill.omodel = oItem;
			// }
			// //表体数据
			// //按 },{来拆分数组 //去掉【和】
			// msg3 = msg3.Substring(1, msg3.Length - 2);
			// msg3 = msg3.Replace("\\", "");
			// msg3 = msg3.Replace("\n", ""); //\n
			// //msg2 = msg2.Replace("'", "’");
			// List<Models.ClsSc_MouldStockBillSub> ls = new List<Models.ClsSc_MouldStockBillSub>();
			// ls = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillSub(msg3);
			// int i = 0;
			// foreach (Models.ClsSc_MouldStockBillSub oItemSub in ls)
			// {

			// i++;
			// oItemSub.HEntryID = i;

			// //oItemSub.HRepairCheckID = 0; //验收项目ID
			// //oItemSub.HRepairCheckContent = ""; //验收内容
			// //oItemSub.HManagerID = 0; //负责人ID
			// //oItemSub.HCloseMan = ""; //行关闭
			// oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			// oItemSub.HCloseType = false; //关闭类型
			// //oItemSub.HRemark = ""; //备注
			// oItemSub.HSourceInterID = 0; // 源单主内码
			// oItemSub.HSourceEntryID = 0; //源单子内码
			// //oItemSub.HSourceBillNo = ""; //源单单号
			// //oItemSub.HSourceBillType = ""; //源单类型
			// //oItemSub.HRelationQty = 0; //关联数量
			// //oItemSub.HRelationMoney = 0; //关联金额
			// //oItemSub.HRepairID = 0; //维修项目
			// //oItemSub.HRepairExplanation =""; //维修要求
			// //oItemSub.HMoney = 0; //维修费用
			// oBill.DetailColl.Add(oItemSub);

			// }
			// //保存
			// //保存完毕后处理
			// bool bResult;
			// if (oBill.omodel.HInterID == 0)
			// {
			// // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			// oCn.RunProc(sql);
			// }
			// else
			// {
			// bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			// //修改成功
			// //string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			// string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			// oCn.RunProc(sql);
			// }
			// if (bResult)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 1;
			// objJsonResult.Message = "保存成功！";
			// //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// else
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// catch (Exception e)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + e.ToString();
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			//}
			#endregion

			#region 模具报废入库单保存/编辑 20240702
			/// <summary>
			/// 保存模具报废入库单
			/// </summary>
			@@ -6853,175 +7805,137 @@
			[HttpPost]
			public object SaveGetMouldScrapInHouseBillList([FromBody] JObject msg)
			{
			DAL.ClsSc_MouldScrapInBill oBill = new DAL.ClsSc_MouldScrapInBill();

			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string refSav = sArray[2].ToString();
			string msg4 = sArray[3].ToString();

			string UserName = "";
			string s = "";
			ListModels oListModels = new ListModels();
			string sMainStr = sArray[0].ToString(); //主表数据
			string sSubStr = sArray[1].ToString(); //子表数据
			string OperationType = sArray[2].ToString(); //操作类型（Add新增、Update编辑）
			string HMaker = sArray[3].ToString(); //制单人
			try
			{
			//编辑权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapRequestBill_Edit", 1, false, msg4))
			//判断权限
			if (OperationType == "Add")
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew;
			//判断新增权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapRequestBill", 1, false, HMaker))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "您没有该模块新增权限,请与管理员联系！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			else
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify;
			//判断编辑权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapRequestBill_Edit", 1, false, HMaker))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "您没有该模块编辑权限,请与管理员联系！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			//表头赋值
			sMainStr = sMainStr.Replace("\\", "");
			sMainStr = sMainStr.Replace("\n", "");
			sMainStr = "[" + sMainStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillMain> lsmain = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillMain>>(sMainStr);
			foreach (Model.ClsSc_MouldStockBillMain oItem in lsmain)
			{
			//单据号是否重复
			if (oBill.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, oItem.HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据号重复！不允许保存！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//判断会计期是否合理
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(oItem.HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = s;
			objJsonResult.data = null;
			return objJsonResult;
			}

			oItem.HYear = sYear;
			oItem.HPeriod = sPeriod;
			DBUtility.ClsPub.CurUserName = oItem.HMaker;
			oBill.omodel = oItem;
			}
			//表体赋值
			//按 },{来拆分数组 //去掉【和】
			sSubStr = sSubStr.Substring(1, sSubStr.Length - 2);
			sSubStr = sSubStr.Replace("\\", "");
			sSubStr = sSubStr.Replace("\n", "");
			sSubStr = "[" + sSubStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillSub> ls = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillSub>>(sSubStr);
			int i = 0;
			foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			{
			i++;
			oItemSub.HEntryID = i;
			oBill.DetailColl.Add(oItemSub);
			}

			string sErrMsg = "";
			bool bResult;
			//获取系统参数
			if (oSystemParameter.ShowBill(ref sErrMsg) == true)
			{
			//保存
			if (OperationType == "Add") //新增保存
			{
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			}
			}
			else //编辑保存
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.Message = "获取系统参数失败！ " + sErrMsg;
			objJsonResult.data = null;
			return objJsonResult;
			}

			DLL.ClsSc_MouldScrapInBill oBill = new DLL.ClsSc_MouldScrapInBill();
			List<Models.ClsSc_MouldStockBillMain> lsmain = new List<Models.ClsSc_MouldStockBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillMain(msg2);
			foreach (Models.ClsSc_MouldStockBillMain oItem in lsmain)
			{
			if (refSav == "Add")
			{
			//单据号是否重复
			if (BillNew0.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, BillOld0.omodel.HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据号重复！不允许保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			if (refSav == "Update")
			{
			if (BillOld0.ShowBill(oItem.HInterID, ref s) == false)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "此单据有误！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			//判断是否可编辑
			if (BillOld0.omodel.HChecker != "" && BillOld0.omodel.HChecker != null)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "此单据已经被审核，不允许修改！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			if (BillOld0.omodel.HBillStatus > 1)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "此单据处于不可编辑状态，不允许修改！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			if (!DBUtility.Xt_BaseBillFun.Fun_AllowEditBill(BillOld0, ref s))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = s + "，不允许修改";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			//oItem.HMaker = "";
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3831";
			oItem.HBillSubType = "3831";
			//oItem.HBillNo = ""; //单据号
			//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			//oItem.HInnerBillNo = ""; // --内部单据号
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			//oItem.HPeriod = 0;
			//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			//oItem.HCheckResult = ""; //验收结论--(正常，异常)
			//oItem.HEmpID = 0; //验收人(Gy_Employee)
			//oItem.HManagerID = 0; //负责人(Gy_Employee)
			//oItem.HDeptID = 0; //验收部门(Gy_Department)
			//oItem.HExplanation = ""; //摘要(故障描述)
			//oItem.HRemark = ""; //备注

			//oItem.HMainSourceInterID = oItem.HInterID;

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			oBill.omodel = oItem;
			}
			//表体数据
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Models.ClsSc_MouldStockBillSub> ls = new List<Models.ClsSc_MouldStockBillSub>();
			ls = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillSub(msg3);
			int i = 0;
			foreach (Models.ClsSc_MouldStockBillSub oItemSub in ls)
			{

			i++;
			oItemSub.HEntryID = i;

			//oItemSub.HRepairCheckID = 0; //验收项目ID
			//oItemSub.HRepairCheckContent = ""; //验收内容
			//oItemSub.HManagerID = 0; //负责人ID
			//oItemSub.HCloseMan = ""; //行关闭
			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			//oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//oItemSub.HRepairID = 0; //维修项目
			//oItemSub.HRepairExplanation =""; //维修要求
			//oItemSub.HMoney = 0; //维修费用
			oBill.DetailColl.Add(oItemSub);

			}
			//保存
			//保存完毕后处理
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			//修改成功
			//string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			if (bResult)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo; //成功！
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			@@ -7029,7 +7943,7 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -7037,8 +7951,8 @@
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			objJsonResult.Message = "保存失败！" + e.Message;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -7236,6 +8150,62 @@

			#endregion

			#region 模具处理出库单分页列表
			[Route("Sc_MouldScrapOutHouseBill/page")]
			[HttpGet]
			public object Sc_MouldScrapOutHouseBillPage(string sWhere, string user, int page, int size)
			{
			DataSet ds;
			try
			{
			List<object> columnNameList = new List<object>();
			//权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			sWhere = sWhere.Replace("'", "''");
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldScrapOutHouseBillList " + page + "," + size + ",''", "h_p_Sc_MouldScrapOutHouseBillList");
			}
			else
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldScrapOutHouseBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldScrapOutHouseBillList");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.list = columnNameList;
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion


			#region[模具处理出库单编辑时获取表头数据]
			[Route("Sc_MouldScrapOutHouseBill/Sc_MouldScrapOutHouseBillListCheckDetai")]
			[HttpGet]
			@@ -7307,7 +8277,158 @@
			}
			#endregion

			#region 模具处理出库单保存/编辑
			#region 模具处理出库单保存/编辑 20240702作废
			/// <summary>
			/// 保存模具处理出库单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			//[Route("Sc_MouldScrapOutHouseBill/SaveGetMouldScrapOutHouseBillList")]
			//[HttpPost]
			//public object SaveGetMouldScrapOutHouseBillList([FromBody] JObject msg)
			//{
			// var _value = msg["msg"].ToString();
			// string msg1 = _value.ToString();
			// string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			// string msg2 = sArray[0].ToString();
			// string msg3 = sArray[1].ToString();
			// string msg4 = sArray[2].ToString();

			// string UserName = "";
			// ListModels oListModels = new ListModels();
			// try
			// {
			// //编辑权限
			// if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Edit", 1, false, msg4))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "无保存权限！";
			// objJsonResult.data = null;
			// return objJsonResult;
			// }

			// DLL.ClsSc_MouldScrapOutBill oBill = new DLL.ClsSc_MouldScrapOutBill();
			// List<Model.ClsSc_MouldStockBillMain> lsmain = new List<Model.ClsSc_MouldStockBillMain>();
			// msg2 = msg2.Replace("\\", "");
			// msg2 = msg2.Replace("\n", ""); //\n
			// lsmain = oListModels.getObjectByJson_Gy_MouldScrapOutHouseBillMain(msg2);
			// foreach (Model.ClsSc_MouldStockBillMain oItem in lsmain)
			// {
			// //oItem.HMaker = "";
			// UserName = oItem.HMaker; //制单人
			// oItem.HBillType = "3832";
			// oItem.HBillSubType = "3832";
			// //oItem.HBillNo = ""; //单据号
			// //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			// //oItem.HInnerBillNo = ""; // --内部单据号
			// oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			// oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			// //oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			// //oItem.HPeriod = 0;
			// //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			// //oItem.HCheckResult = ""; //验收结论--(正常，异常)
			// //oItem.HEmpID = 0; //验收人(Gy_Employee)
			// //oItem.HManagerID = 0; //负责人(Gy_Employee)
			// //oItem.HDeptID = 0; //验收部门(Gy_Department)
			// //oItem.HExplanation = ""; //摘要(故障描述)
			// //oItem.HRemark = ""; //备注

			// //oItem.HMainSourceInterID = oItem.HInterID;

			// //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			// if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// oBill.omodel = oItem;
			// }
			// //表体数据
			// //按 },{来拆分数组 //去掉【和】
			// msg3 = msg3.Substring(1, msg3.Length - 2);
			// msg3 = msg3.Replace("\\", "");
			// msg3 = msg3.Replace("\n", ""); //\n
			// //msg2 = msg2.Replace("'", "’");
			// List<Model.ClsSc_MouldStockBillSub> ls = new List<Model.ClsSc_MouldStockBillSub>();
			// ls = oListModels.getObjectByJson_Gy_MouldScrapOutHouseBillSub(msg3);
			// int i = 0;
			// foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			// {

			// i++;
			// oItemSub.HEntryID = i;

			// //oItemSub.HRepairCheckID = 0; //验收项目ID
			// //oItemSub.HRepairCheckContent = ""; //验收内容
			// //oItemSub.HManagerID = 0; //负责人ID
			// //oItemSub.HCloseMan = ""; //行关闭
			// oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			// oItemSub.HCloseType = false; //关闭类型
			// //oItemSub.HRemark = ""; //备注
			// oItemSub.HSourceInterID = 0; // 源单主内码
			// oItemSub.HSourceEntryID = 0; //源单子内码
			// //oItemSub.HSourceBillNo = ""; //源单单号
			// //oItemSub.HSourceBillType = ""; //源单类型
			// //oItemSub.HRelationQty = 0; //关联数量
			// //oItemSub.HRelationMoney = 0; //关联金额
			// //oItemSub.HRepairID = 0; //维修项目
			// //oItemSub.HRepairExplanation =""; //维修要求
			// //oItemSub.HMoney = 0; //维修费用
			// oBill.DetailColl.Add(oItemSub);

			// }
			// //保存
			// //保存完毕后处理
			// bool bResult;
			// if (oBill.omodel.HInterID == 0)
			// {
			// // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			// oCn.RunProc(sql);
			// }
			// else
			// {
			// bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			// //修改成功
			// //string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			// string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			// oCn.RunProc(sql);
			// }
			// if (bResult)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 1;
			// objJsonResult.Message = "保存成功！";
			// //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// else
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// catch (Exception e)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + e.ToString();
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			//}
			#endregion

			#region 模具处理出库单保存/编辑 20240702
			/// <summary>
			/// 保存模具处理出库单
			/// </summary>
			@@ -7317,125 +8438,126 @@
			[HttpPost]
			public object SaveGetMouldScrapOutHouseBillList([FromBody] JObject msg)
			{
			DAL.ClsSc_MouldScrapOutBill oBill = new DAL.ClsSc_MouldScrapOutBill();

			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();

			string UserName = "";
			ListModels oListModels = new ListModels();
			string sMainStr = sArray[0].ToString(); //主表数据
			string sSubStr = sArray[1].ToString(); //子表数据
			string HMaker = sArray[2].ToString(); //制单人
			try
			{
			//编辑权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Edit", 1, false, msg4))
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Edit", 1, false, HMaker))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.Message = "您没有该模块新增/编辑权限,请与管理员联系！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//表头赋值
			sMainStr = sMainStr.Replace("\\", "");
			sMainStr = sMainStr.Replace("\n", "");
			sMainStr = "[" + sMainStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillMain> lsmain = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillMain>>(sMainStr);
			foreach (Model.ClsSc_MouldStockBillMain oItem in lsmain)
			{
			if (oItem.HInterID == 0)
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew;
			}
			else
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify;
			}
			//单据号是否重复
			if (oBill.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, oItem.HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据号重复！不允许保存！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//判断会计期是否合理
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(oItem.HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = s;
			objJsonResult.data = null;
			return objJsonResult;
			}

			oItem.HYear = sYear;
			oItem.HPeriod = sPeriod;
			DBUtility.ClsPub.CurUserName = oItem.HMaker;
			oBill.omodel = oItem;
			}
			//表体赋值
			//按 },{来拆分数组 //去掉【和】
			sSubStr = sSubStr.Substring(1, sSubStr.Length - 2);
			sSubStr = sSubStr.Replace("\\", "");
			sSubStr = sSubStr.Replace("\n", "");
			sSubStr = "[" + sSubStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillSub> ls = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillSub>>(sSubStr);
			int i = 0;
			foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			{
			i++;
			oItemSub.HEntryID = i;
			oBill.DetailColl.Add(oItemSub);
			}

			string sErrMsg = "";
			bool bResult;
			//获取系统参数
			if (oSystemParameter.ShowBill(ref sErrMsg) == true)
			{
			//保存
			if (oBill.omodel.HInterID == 0) //新增保存
			{
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			}
			}
			else //编辑保存
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "获取系统参数失败！ " + sErrMsg;
			objJsonResult.data = null;
			return objJsonResult;
			}

			DLL.ClsSc_MouldScrapOutBill oBill = new DLL.ClsSc_MouldScrapOutBill();
			List<Model.ClsSc_MouldStockBillMain> lsmain = new List<Model.ClsSc_MouldStockBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldScrapOutHouseBillMain(msg2);
			foreach (Model.ClsSc_MouldStockBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3832";
			oItem.HBillSubType = "3832";
			//oItem.HBillNo = ""; //单据号
			//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			//oItem.HInnerBillNo = ""; // --内部单据号
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			//oItem.HPeriod = 0;
			//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			//oItem.HCheckResult = ""; //验收结论--(正常，异常)
			//oItem.HEmpID = 0; //验收人(Gy_Employee)
			//oItem.HManagerID = 0; //负责人(Gy_Employee)
			//oItem.HDeptID = 0; //验收部门(Gy_Department)
			//oItem.HExplanation = ""; //摘要(故障描述)
			//oItem.HRemark = ""; //备注

			//oItem.HMainSourceInterID = oItem.HInterID;

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			oBill.omodel = oItem;
			}
			//表体数据
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Model.ClsSc_MouldStockBillSub> ls = new List<Model.ClsSc_MouldStockBillSub>();
			ls = oListModels.getObjectByJson_Gy_MouldScrapOutHouseBillSub(msg3);
			int i = 0;
			foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			{

			i++;
			oItemSub.HEntryID = i;

			//oItemSub.HRepairCheckID = 0; //验收项目ID
			//oItemSub.HRepairCheckContent = ""; //验收内容
			//oItemSub.HManagerID = 0; //负责人ID
			//oItemSub.HCloseMan = ""; //行关闭
			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			//oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//oItemSub.HRepairID = 0; //维修项目
			//oItemSub.HRepairExplanation =""; //维修要求
			//oItemSub.HMoney = 0; //维修费用
			oBill.DetailColl.Add(oItemSub);

			}
			//保存
			//保存完毕后处理
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			//修改成功
			//string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			if (bResult)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo; //成功！
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			@@ -7443,7 +8565,7 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -7451,8 +8573,8 @@
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			objJsonResult.Message = "保存失败！" + e.Message;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -7717,6 +8839,22 @@
			DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (flag == 1)
			{
			if (oBill.omodel.HBillStatus == 2)
			@@ -7740,7 +8878,7 @@
			}
			else
			{
			if (oBill.omodel.HBillStatus == 1)
			if (oBill.omodel.HBillStatus != 2)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			@@ -7771,6 +8909,152 @@
			}
			}
			#endregion

			#region 器具处理出库单关闭/反关闭
			/// <summary>
			/// </summary>
			/// <param name="HInterID">单据ID</param>
			/// <param name="IsAudit">关闭(0),反关闭(1)</param>
			/// <param name="CurUserName">关闭人</param>
			/// <returns></returns>
			[Route("Sc_MouldScrapOutHouseBill/CloseSc_MouldScrapOutHouseBill")]
			[HttpGet]
			public object CloseSc_MouldScrapOutHouseBill(int HInterID, int IsAudit, string CurUserName)
			{
			string ModRightNameCheck = "Sc_MouldScrapOutBill_Close";
			DBUtility.ClsPub.CurUserName = CurUserName;
			try
			{
			//检查权限
			if (!DBUtility.ClsPub.Security_Log_second(ModRightNameCheck, 1, false, CurUserName))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败！无权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//HInterID数据判断
			if (HInterID <= 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID小于0！";
			objJsonResult.data = null;
			return objJsonResult;
			}


			Int64 lngBillKey = 0;
			lngBillKey = DBUtility.ClsPub.isLong(HInterID); //对HInterID进行类型的转换
			DAL.ClsSc_MouldProdOutBill oBill = new DAL.ClsSc_MouldProdOutBill(); //实例化单据操作类，用于进行相关操作

			//针对需要进行的操作，检验当前单据的状态是否支持需要进行的操作
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo)) //根据HInterID获取该单据的数据
			{
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HChecker.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未审核!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (IsAudit == 0) //关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未关闭!不需要反关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}


			//进行需要进行的关闭/反关闭操作
			if (IsAudit == 0) //关闭提交
			{
			//关闭提交
			if (oBill.CloseBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭提交
			{
			//反关闭提交
			if (oBill.CancelClose(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "反关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "反关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败或者反关闭失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion


			#endregion

			@@ -7826,6 +9110,68 @@

			}

			#endregion

			#region 模具退库单列表查询-分页
			/// <summary>
			/// 返回应收单列表
			///参数：string sql。
			///返回值：object。
			/// </summary>
			[Route("Sc_MouldProdBackBill/list_byPage")]
			[HttpGet]
			public object getSc_MouldProdBackBill_byPage(string sWhere, string user, string Organization, int page, int size)
			{
			try
			{
			Log.LogInfo("成功！"); //记录提交数据

			//查看权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			Log.LogInfo("有权限");
			LogService.Write(sWhere + ";" + Organization);

			string sql = "";
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			sWhere = " and 库存组织='" + Organization + "'";
			sWhere = sWhere.Replace("'", "''");
			sql = "exec h_p_Sc_MouldProdBackBillList_Query " + page + "," + size + ",'" + Organization + "','" + sWhere + "'";
			Log.LogInfo(sql);
			ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_p_Sc_MouldProdBackBillList_Query");
			}
			else
			{
			sWhere += " and 库存组织='" + Organization + "'";
			sWhere = sWhere.Replace("'", "''");
			sql = "exec h_p_Sc_MouldProdBackBillList_Query " + page + "," + size + ",'" + Organization + "','" + sWhere + "'";
			Log.LogInfo(sql);
			ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_p_Sc_MouldProdBackBillList_Query");
			}

			objJsonResult.code = "1";
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region[模具退库单编辑时获取表头数据]
			@@ -7899,7 +9245,159 @@
			}
			#endregion

			#region 模具退库单保存/编辑
			#region 模具退库单保存/编辑 20240702作废
			/// <summary>
			/// 保存模具退库单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			//[Route("Sc_MouldProdBackBill/SaveGetMouldProdBackBillList")]
			//[HttpPost]
			//public object SaveGetMouldProdBackBillList([FromBody] JObject msg)
			//{
			// var _value = msg["msg"].ToString();
			// string msg1 = _value.ToString();
			// string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			// string msg2 = sArray[0].ToString();
			// string msg3 = sArray[1].ToString();
			// string msg4 = sArray[2].ToString();

			// string UserName = "";
			// ListModels oListModels = new ListModels();
			// try
			// {
			// if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Edit", 1, false, msg4))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "没有保存权限";
			// objJsonResult.data = null;
			// return objJsonResult;
			// }

			// DLL.ClsSc_MouldProdBackBill oBill = new DLL.ClsSc_MouldProdBackBill();
			// List<Model.ClsSc_MouldProdBackBillMain> lsmain = new List<Model.ClsSc_MouldProdBackBillMain>();
			// msg2 = msg2.Replace("\\", "");
			// msg2 = msg2.Replace("\n", ""); //\n
			// lsmain = oListModels.getObjectByJson_Gy_MouldProdBackBillMain(msg2);
			// foreach (Model.ClsSc_MouldProdBackBillMain oItem in lsmain)
			// {
			// //oItem.HMaker = "";
			// UserName = oItem.HMaker; //制单人
			// oItem.HBillType = "3803";
			// oItem.HBillSubType = "3803";
			// //oItem.HBillNo = ""; //单据号
			// //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			// //oItem.HInnerBillNo = ""; // --内部单据号
			// oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			// oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			// //oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			// //oItem.HPeriod = 0;
			// //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			// //oItem.HCheckResult = ""; //验收结论--(正常，异常)
			// //oItem.HEmpID = 0; //验收人(Gy_Employee)
			// //oItem.HManagerID = 0; //负责人(Gy_Employee)
			// //oItem.HDeptID = 0; //验收部门(Gy_Department)
			// //oItem.HExplanation = ""; //摘要(故障描述)
			// //oItem.HRemark = ""; //备注

			// //oItem.HMainSourceInterID = oItem.HInterID;

			// //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			// if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// oBill.omodel = oItem;
			// }
			// //表体数据
			// //按 },{来拆分数组 //去掉【和】
			// msg3 = msg3.Substring(1, msg3.Length - 2);
			// msg3 = msg3.Replace("\\", "");
			// msg3 = msg3.Replace("\n", ""); //\n
			// //msg2 = msg2.Replace("'", "’");
			// List<Model.ClsSc_MouldProdBackBillSub> ls = new List<Model.ClsSc_MouldProdBackBillSub>();
			// ls = oListModels.getObjectByJson_Gy_MouldProdBackBillSub(msg3);
			// int i = 0;
			// foreach (Model.ClsSc_MouldProdBackBillSub oItemSub in ls)
			// {

			// i++;
			// oItemSub.HEntryID = i;

			// //oItemSub.HRepairCheckID = 0; //验收项目ID
			// //oItemSub.HRepairCheckContent = ""; //验收内容
			// //oItemSub.HManagerID = 0; //负责人ID
			// //oItemSub.HCloseMan = ""; //行关闭
			// oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			// oItemSub.HCloseType = false; //关闭类型
			// //oItemSub.HRemark = ""; //备注
			// oItemSub.HSourceInterID = 0; // 源单主内码
			// oItemSub.HSourceEntryID = 0; //源单子内码
			// //oItemSub.HSourceBillNo = ""; //源单单号
			// //oItemSub.HSourceBillType = ""; //源单类型
			// //oItemSub.HRelationQty = 0; //关联数量
			// //oItemSub.HRelationMoney = 0; //关联金额
			// //oItemSub.HRepairID = 0; //维修项目
			// //oItemSub.HRepairExplanation =""; //维修要求
			// //oItemSub.HMoney = 0; //维修费用
			// oBill.DetailColl.Add(oItemSub);

			// }
			// //保存
			// //保存完毕后处理
			// bool bResult;
			// if (oBill.omodel.HInterID == 0)
			// {
			// // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// string sql1 = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			// oCn.RunProc(sql1);
			// }
			// else
			// {
			// bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			// //修改成功
			// //string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			// string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			// oCn.RunProc(sql);
			// }
			// if (bResult)
			// {
			// string sql =string.Format($"exec h_p_Sc_MouldProdBackBillList '{oBill.omodel.HBillNo}' ") ;
			// oCn.RunProc(sql);
			// objJsonResult.code = "0";
			// objJsonResult.count = 1;
			// objJsonResult.Message = "保存成功！";
			// //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// else
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// catch (Exception e)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + e.ToString();
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			//}
			#endregion

			#region 模具退库单保存/编辑 20240702
			/// <summary>
			/// 保存模具退库单
			/// </summary>
			@@ -7909,126 +9407,127 @@
			[HttpPost]
			public object SaveGetMouldProdBackBillList([FromBody] JObject msg)
			{
			DAL.ClsSc_MouldProdBackBill oBill = new DAL.ClsSc_MouldProdBackBill();

			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();

			string UserName = "";
			ListModels oListModels = new ListModels();
			string sMainStr = sArray[0].ToString(); //主表数据
			string sSubStr = sArray[1].ToString(); //子表数据
			string HMaker = sArray[2].ToString(); //制单人
			try
			{
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Edit", 1, false, msg4))
			//判断权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Edit", 1, false, HMaker))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有保存权限";
			objJsonResult.Message = "您没有该模块新增/编辑权限,请与管理员联系！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//表头赋值
			sMainStr = sMainStr.Replace("\\", "");
			sMainStr = sMainStr.Replace("\n", "");
			sMainStr = "[" + sMainStr.ToString() + "]";
			List<Model.ClsSc_MouldProdBackBillMain> lsmain = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldProdBackBillMain>>(sMainStr);
			foreach (Model.ClsSc_MouldProdBackBillMain oItem in lsmain)
			{
			if (oItem.HInterID == 0)
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew;
			}
			else
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify;
			}
			//单据号是否重复
			if (oBill.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, oItem.HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据号重复！不允许保存！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//判断会计期是否合理
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(oItem.HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = s;
			objJsonResult.data = null;
			return objJsonResult;
			}

			oItem.HYear = sYear;
			oItem.HPeriod = sPeriod;
			DBUtility.ClsPub.CurUserName = oItem.HMaker;
			oBill.omodel = oItem;
			}
			//表体赋值
			//按 },{来拆分数组 //去掉【和】
			sSubStr = sSubStr.Substring(1, sSubStr.Length - 2);
			sSubStr = sSubStr.Replace("\\", "");
			sSubStr = sSubStr.Replace("\n", "");
			sSubStr = "[" + sSubStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillSub> ls = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillSub>>(sSubStr);
			int i = 0;
			foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			{
			i++;
			oItemSub.HEntryID = i;
			oBill.DetailColl.Add(oItemSub);
			}

			string sErrMsg = "";
			bool bResult;
			//获取系统参数
			if (oSystemParameter.ShowBill(ref sErrMsg) == true)
			{
			//保存
			if (oBill.omodel.HInterID == 0) //新增保存
			{
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql1 = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql1);
			}
			}
			else //编辑保存
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "获取系统参数失败！ " + sErrMsg;
			objJsonResult.data = null;
			return objJsonResult;
			}

			DLL.ClsSc_MouldProdBackBill oBill = new DLL.ClsSc_MouldProdBackBill();
			List<Model.ClsSc_MouldProdBackBillMain> lsmain = new List<Model.ClsSc_MouldProdBackBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldProdBackBillMain(msg2);
			foreach (Model.ClsSc_MouldProdBackBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3803";
			oItem.HBillSubType = "3803";
			//oItem.HBillNo = ""; //单据号
			//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			//oItem.HInnerBillNo = ""; // --内部单据号
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			//oItem.HPeriod = 0;
			//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			//oItem.HCheckResult = ""; //验收结论--(正常，异常)
			//oItem.HEmpID = 0; //验收人(Gy_Employee)
			//oItem.HManagerID = 0; //负责人(Gy_Employee)
			//oItem.HDeptID = 0; //验收部门(Gy_Department)
			//oItem.HExplanation = ""; //摘要(故障描述)
			//oItem.HRemark = ""; //备注

			//oItem.HMainSourceInterID = oItem.HInterID;

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			oBill.omodel = oItem;
			}
			//表体数据
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Model.ClsSc_MouldProdBackBillSub> ls = new List<Model.ClsSc_MouldProdBackBillSub>();
			ls = oListModels.getObjectByJson_Gy_MouldProdBackBillSub(msg3);
			int i = 0;
			foreach (Model.ClsSc_MouldProdBackBillSub oItemSub in ls)
			{

			i++;
			oItemSub.HEntryID = i;

			//oItemSub.HRepairCheckID = 0; //验收项目ID
			//oItemSub.HRepairCheckContent = ""; //验收内容
			//oItemSub.HManagerID = 0; //负责人ID
			//oItemSub.HCloseMan = ""; //行关闭
			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			//oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//oItemSub.HRepairID = 0; //维修项目
			//oItemSub.HRepairExplanation =""; //维修要求
			//oItemSub.HMoney = 0; //维修费用
			oBill.DetailColl.Add(oItemSub);

			}
			//保存
			//保存完毕后处理
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			string sql1 = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql1);
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			//修改成功
			//string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			if (bResult)
			{
			string sql =string.Format($"exec h_p_Sc_MouldProdBackBillList '{oBill.omodel.HBillNo}' ") ;
			oCn.RunProc(sql);
			string sql = string.Format($"exec h_p_Sc_MouldProdBackBillList '{oBill.omodel.HBillNo}' ");
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo; //成功！
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			@@ -8036,7 +9535,7 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -8044,8 +9543,8 @@
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			objJsonResult.Message = "保存失败！" + e.Message;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -8171,6 +9670,22 @@
			DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (flag == 1)
			{
			if (oBill.omodel.HBillStatus == 2)
			@@ -8194,7 +9709,7 @@
			}
			else
			{
			if (oBill.omodel.HBillStatus == 1)
			if (oBill.omodel.HBillStatus != 2)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			@@ -8225,6 +9740,153 @@
			}
			}
			#endregion

			#region 器具领用退库单关闭/反关闭
			/// <summary>
			/// </summary>
			/// <param name="HInterID">单据ID</param>
			/// <param name="IsAudit">关闭(0),反关闭(1)</param>
			/// <param name="CurUserName">关闭人</param>
			/// <returns></returns>
			[Route("Sc_MouldProdBackBill/CloseSc_MouldProdBackBill")]
			[HttpGet]
			public object CloseSc_MouldProdBackBill(int HInterID, int IsAudit, string CurUserName)
			{
			string ModRightNameCheck = "Sc_MouldProdBackBill_Close";
			DBUtility.ClsPub.CurUserName = CurUserName;
			try
			{
			//检查权限
			if (!DBUtility.ClsPub.Security_Log_second(ModRightNameCheck, 1, false, CurUserName))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败！无权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//HInterID数据判断
			if (HInterID <= 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID小于0！";
			objJsonResult.data = null;
			return objJsonResult;
			}


			Int64 lngBillKey = 0;
			lngBillKey = DBUtility.ClsPub.isLong(HInterID); //对HInterID进行类型的转换
			DAL.ClsSc_MouldProdBackBill oBill = new DAL.ClsSc_MouldProdBackBill(); //实例化单据操作类，用于进行相关操作

			//针对需要进行的操作，检验当前单据的状态是否支持需要进行的操作
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo)) //根据HInterID获取该单据的数据
			{
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HChecker.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未审核!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (IsAudit == 0) //关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未关闭!不需要反关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}


			//进行需要进行的关闭/反关闭操作
			if (IsAudit == 0) //关闭提交
			{
			//关闭提交
			if (oBill.CloseBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭提交
			{
			//反关闭提交
			if (oBill.CancelClose(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "反关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "反关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败或者反关闭失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion


			#endregion

			#region 模具领用单
			@@ -8280,6 +9942,63 @@

			}

			#endregion

			#region 模具领用单列表查询-分页
			/// <summary>
			/// 返回应收单列表
			///参数：string sql。
			///返回值：object。
			/// </summary>
			[Route("Sc_MouldProdOutBill/list_byPage")]
			[HttpGet]
			public object getSc_MouldProdOutBill_byPage(string sWhere, string user, string Organization, int page, int size)
			{
			try
			{
			//查看权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			string sql = "";
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			sWhere = " and 库存组织='" + Organization + "'";
			sWhere = sWhere.Replace("'", "''");
			sql = "exec h_p_Sc_MouldProdOutHouseBillList_Query " + page + "," + size + ",'" + Organization + "','" + sWhere + "'";
			Log.LogInfo(sql);
			ds = oCN.RunProcReturn(sql, "h_p_Sc_MouldProdOutHouseBillList_Query");
			}
			else
			{
			sWhere += " and 库存组织='" + Organization + "'";
			sWhere = sWhere.Replace("'", "''");
			sql = "exec h_p_Sc_MouldProdOutHouseBillList_Query " + page + "," + size + ",'" + Organization + "','" + sWhere + "'";
			Log.LogInfo(sql);
			ds = oCN.RunProcReturn(sql, "h_p_Sc_MouldProdOutHouseBillList_Query");
			}

			objJsonResult.code = "1";
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region[模具领用单编辑时获取表头数据]
			@@ -8352,7 +10071,158 @@
			}
			#endregion

			#region 模具领用单保存/编辑
			#region 模具领用单保存/编辑 20240702作废
			/// <summary>
			/// 保存模具领用单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			//[Route("Sc_MouldProdOutBill/SaveGetMouldProdOutBillList")]
			//[HttpPost]
			//public object SaveGetMouldProdOutBillList([FromBody] JObject msg)
			//{
			// var _value = msg["msg"].ToString();
			// string msg1 = _value.ToString();
			// string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			// string msg2 = sArray[0].ToString();
			// string msg3 = sArray[1].ToString();
			// string msg4 = sArray[2].ToString();


			// string UserName = "";
			// ListModels oListModels = new ListModels();
			// try
			// {
			// //模块名，写入日志，报错框，用户名
			// if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBill_Edit", 1, false, msg4))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "没有保存权限";
			// objJsonResult.data = null;
			// return objJsonResult;
			// }
			// DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
			// List<Model.ClsSc_MouldProdOutBillMain> lsmain = new List<Model.ClsSc_MouldProdOutBillMain>();
			// msg2 = msg2.Replace("\\", "");
			// msg2 = msg2.Replace("\n", ""); //\n
			// lsmain = oListModels.getObjectByJson_Gy_MouldProdOutBillMain(msg2);
			// foreach (Model.ClsSc_MouldProdOutBillMain oItem in lsmain)
			// {
			// //oItem.HMaker = "";
			// UserName = oItem.HMaker; //制单人
			// oItem.HBillType = "3802";
			// oItem.HBillSubType = "3802";
			// //oItem.HBillNo = ""; //单据号
			// //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			// //oItem.HInnerBillNo = ""; // --内部单据号
			// oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			// oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			// //oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			// //oItem.HPeriod = 0;
			// //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			// //oItem.HCheckResult = ""; //验收结论--(正常，异常)
			// //oItem.HEmpID = 0; //验收人(Gy_Employee)
			// //oItem.HManagerID = 0; //负责人(Gy_Employee)
			// //oItem.HDeptID = 0; //验收部门(Gy_Department)
			// //oItem.HExplanation = ""; //摘要(故障描述)
			// //oItem.HRemark = ""; //备注

			// //oItem.HMainSourceInterID = oItem.HInterID;

			// //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			// if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// oBill.omodel = oItem;
			// }
			// //表体数据
			// //按 },{来拆分数组 //去掉【和】
			// msg3 = msg3.Substring(1, msg3.Length - 2);
			// msg3 = msg3.Replace("\\", "");
			// msg3 = msg3.Replace("\n", ""); //\n
			// //msg2 = msg2.Replace("'", "’");
			// List<Model.ClsSc_MouldStockBillSub> ls = new List<Model.ClsSc_MouldStockBillSub>();
			// ls = oListModels.getObjectByJson_Gy_MouldStockBillSub(msg3);
			// int i = 0;
			// foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			// {

			// i++;
			// oItemSub.HEntryID = i;

			// //oItemSub.HRepairCheckID = 0; //验收项目ID
			// //oItemSub.HRepairCheckContent = ""; //验收内容
			// //oItemSub.HManagerID = 0; //负责人ID
			// //oItemSub.HCloseMan = ""; //行关闭
			// oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			// oItemSub.HCloseType = false; //关闭类型
			// //oItemSub.HRemark = ""; //备注
			// oItemSub.HSourceInterID = 0; // 源单主内码
			// oItemSub.HSourceEntryID = 0; //源单子内码
			// //oItemSub.HSourceBillNo = ""; //源单单号
			// //oItemSub.HSourceBillType = ""; //源单类型
			// //oItemSub.HRelationQty = 0; //关联数量
			// //oItemSub.HRelationMoney = 0; //关联金额
			// //oItemSub.HRepairID = 0; //维修项目
			// //oItemSub.HRepairExplanation =""; //维修要求
			// //oItemSub.HMoney = 0; //维修费用
			// oBill.DetailColl.Add(oItemSub);

			// }
			// //保存
			// //保存完毕后处理
			// bool bResult;
			// if (oBill.omodel.HInterID == 0)
			// {
			// // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			// oCn.RunProc(sql);
			// }
			// else
			// {
			// bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			// //修改成功
			// //string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			// string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			// oCn.RunProc(sql);
			// }
			// if (bResult)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 1;
			// objJsonResult.Message = "保存成功！";
			// //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// else
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// catch (Exception e)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + e.ToString();
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			//}
			#endregion

			#region 模具领用单保存/编辑 20240702
			/// <summary>
			/// 保存模具领用单
			/// </summary>
			@@ -8362,125 +10232,126 @@
			[HttpPost]
			public object SaveGetMouldProdOutBillList([FromBody] JObject msg)
			{
			DAL.ClsSc_MouldProdOutBill oBill = new DAL.ClsSc_MouldProdOutBill();

			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();


			string UserName = "";
			ListModels oListModels = new ListModels();
			string sMainStr = sArray[0].ToString(); //主表数据
			string sSubStr = sArray[1].ToString(); //子表数据
			string HMaker = sArray[2].ToString(); //制单人
			try
			{
			//模块名，写入日志，报错框，用户名
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBill_Edit", 1, false, msg4))
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBill_Edit", 1, false, HMaker))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有保存权限";
			objJsonResult.Message = "您没有该模块新增/编辑权限,请与管理员联系！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
			List<Model.ClsSc_MouldProdOutBillMain> lsmain = new List<Model.ClsSc_MouldProdOutBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldProdOutBillMain(msg2);
			//表头赋值
			sMainStr = sMainStr.Replace("\\", "");
			sMainStr = sMainStr.Replace("\n", "");
			sMainStr = "[" + sMainStr.ToString() + "]";
			List<Model.ClsSc_MouldProdOutBillMain> lsmain = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldProdOutBillMain>>(sMainStr);
			foreach (Model.ClsSc_MouldProdOutBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3802";
			oItem.HBillSubType = "3802";
			//oItem.HBillNo = ""; //单据号
			//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			//oItem.HInnerBillNo = ""; // --内部单据号
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			//oItem.HPeriod = 0;
			//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			//oItem.HCheckResult = ""; //验收结论--(正常，异常)
			//oItem.HEmpID = 0; //验收人(Gy_Employee)
			//oItem.HManagerID = 0; //负责人(Gy_Employee)
			//oItem.HDeptID = 0; //验收部门(Gy_Department)
			//oItem.HExplanation = ""; //摘要(故障描述)
			//oItem.HRemark = ""; //备注

			//oItem.HMainSourceInterID = oItem.HInterID;

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			if (oItem.HInterID == 0)
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew;
			}
			else
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify;
			}
			//单据号是否重复
			if (oBill.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, oItem.HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			objJsonResult.Message = "单据号重复！不允许保存！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//判断会计期是否合理
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(oItem.HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = s;
			objJsonResult.data = null;
			return objJsonResult;
			}

			oItem.HYear = sYear;
			oItem.HPeriod = sPeriod;
			DBUtility.ClsPub.CurUserName = oItem.HMaker;
			oBill.omodel = oItem;
			}
			//表体数据
			//表体赋值
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Model.ClsSc_MouldStockBillSub> ls = new List<Model.ClsSc_MouldStockBillSub>();
			ls = oListModels.getObjectByJson_Gy_MouldStockBillSub(msg3);
			sSubStr = sSubStr.Substring(1, sSubStr.Length - 2);
			sSubStr = sSubStr.Replace("\\", "");
			sSubStr = sSubStr.Replace("\n", "");
			sSubStr = "[" + sSubStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillSub> ls = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillSub>>(sSubStr);
			int i = 0;
			foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			{

			i++;
			oItemSub.HEntryID = i;

			//oItemSub.HRepairCheckID = 0; //验收项目ID
			//oItemSub.HRepairCheckContent = ""; //验收内容
			//oItemSub.HManagerID = 0; //负责人ID
			//oItemSub.HCloseMan = ""; //行关闭
			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			//oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//oItemSub.HRepairID = 0; //维修项目
			//oItemSub.HRepairExplanation =""; //维修要求
			//oItemSub.HMoney = 0; //维修费用
			oBill.DetailColl.Add(oItemSub);

			}
			//保存
			//保存完毕后处理

			string sErrMsg = "";
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			//获取系统参数
			if (oSystemParameter.ShowBill(ref sErrMsg) == true)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			//保存
			if (oBill.omodel.HInterID == 0) //新增保存
			{
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			}
			}
			else //编辑保存
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			}
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			//修改成功
			//string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "获取系统参数失败！ " + sErrMsg;
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (bResult)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo; //成功！
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			@@ -8488,7 +10359,7 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -8496,8 +10367,8 @@
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			objJsonResult.Message = "保存失败！" + e.Message;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -8660,8 +10531,32 @@
			DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (flag == 1)
			{
			if (oBill.omodel.HChecker.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已审核!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HBillStatus == 2)
			{
			objJsonResult.code = "0";
			@@ -8683,7 +10578,7 @@
			}
			else
			{
			if (oBill.omodel.HBillStatus == 1)
			if (oBill.omodel.HBillStatus != 2)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			@@ -8714,6 +10609,153 @@
			}
			}
			#endregion

			#region 器具领用出库单关闭/反关闭
			/// <summary>
			/// </summary>
			/// <param name="HInterID">单据ID</param>
			/// <param name="IsAudit">关闭(0),反关闭(1)</param>
			/// <param name="CurUserName">关闭人</param>
			/// <returns></returns>
			[Route("Sc_MouldProdOutBill/CloseSc_MouldProdOutBill")]
			[HttpGet]
			public object CloseSc_MouldProdOutBill(int HInterID, int IsAudit, string CurUserName)
			{
			string ModRightNameCheck = "Sc_MouldProdOutBill_Close";
			DBUtility.ClsPub.CurUserName = CurUserName;
			try
			{
			//检查权限
			if (!DBUtility.ClsPub.Security_Log_second(ModRightNameCheck, 1, false, CurUserName))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败！无权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//HInterID数据判断
			if (HInterID <= 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID小于0！";
			objJsonResult.data = null;
			return objJsonResult;
			}


			Int64 lngBillKey = 0;
			lngBillKey = DBUtility.ClsPub.isLong(HInterID); //对HInterID进行类型的转换
			DAL.ClsSc_MouldProdOutBill oBill = new DAL.ClsSc_MouldProdOutBill(); //实例化单据操作类，用于进行相关操作

			//针对需要进行的操作，检验当前单据的状态是否支持需要进行的操作
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo)) //根据HInterID获取该单据的数据
			{
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HChecker.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未审核!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (IsAudit == 0) //关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未关闭!不需要反关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}


			//进行需要进行的关闭/反关闭操作
			if (IsAudit == 0) //关闭提交
			{
			//关闭提交
			if (oBill.CloseBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭提交
			{
			//反关闭提交
			if (oBill.CancelClose(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "反关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "反关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败或者反关闭失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion


			#endregion

			#region 模具寿命调整单
			@@ -9436,5 +11478,366 @@
			return objJsonResult;
			}
			#endregion

			#region 器具点检记录拍照上传
			[Route("Sc_MouldDotCheckBill/UploadFile")]
			[HttpPost]
			public object UploadFile()
			{

			string HBillNo = HttpContext.Current.Request.Params["HBillNo"]; //单据号
			string HRemark = HttpContext.Current.Request.Params["HRemark"]; //备注
			string HUserName = HttpContext.Current.Request.Params["HUserName"]; //创建人
			HttpPostedFile files = HttpContext.Current.Request.Files["file"];
			string path = HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HBillNo);
			//string path = @"D:\\Files\\"+ HBillNo;
			dynamic dyResult = UpLoadFile(files, path, HBillNo, HRemark, HUserName);
			if (dyResult != null && dyResult.result == 1)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "上传成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = dyResult.returnval;
			objJsonResult.data = null;
			return objJsonResult;
			}

			}

			public dynamic UpLoadFile(HttpPostedFile files, string path, string HBillNo, string HRemark, string HUserName)
			{
			dynamic Result_Ob = new { result = 1, returnval = "上传成功！" };
			string filePath = Path.GetFullPath(files.FileName);//文件上传路径
			string fileExtension = Path.GetExtension(files.FileName);// 文件扩展名
			string filename = files.FileName;//文件名
			string fileSavePath = path;// 上传保存路径
			int filesize = files.ContentLength;//获取上传文件的大小单位为字节byte
			int Maxsize = 40000 * 1024;//定义上传文件的最大空间大小为40M
			try
			{
			if (files == null \|\| files.ContentLength <= 0)
			{
			Result_Ob = new { result = 0, returnval = "文件不能为空!" };
			return Result_Ob;
			}
			if (filesize >= Maxsize)
			{
			Result_Ob = new { result = 0, returnval = "上传文件超过40M，不能上传！" };
			return Result_Ob;
			}

			string fileurl = Path.Combine(fileSavePath, filename);
			if (Directory.Exists(fileurl) == true) //如果存在重名文件就提示
			{
			Result_Ob = new { result = 0, returnval = "存在同名文件！" };
			return Result_Ob;
			}
			//删除数据表数据
			ds = oCN.RunProcReturn("delete from MES_AccessoriesList where HSourceBillNo ='" + HBillNo + "' and HFileName='" + filename + "'", "MES_AccessoriesList");
			if (Directory.Exists(path))
			{
			File.Delete(fileurl); //删除指定文件
			files.SaveAs(fileurl);
			string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
			if (File.Exists(fileurl))
			{
			//这里可以执行一些其它的操作，比如更新数据库
			//写入数据表
			oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
			",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
			",HFileClsID,HSourceBillNo" +
			") values('"
			+ filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
			",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
			"','" + 0 + "','" + HBillNo +
			"') ");
			}
			else
			{
			Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
			}
			}
			else
			{
			Directory.CreateDirectory(fileSavePath); //添加文件夹
			files.SaveAs(fileurl);
			string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
			if (File.Exists(fileurl))
			{
			//这里可以执行一些其它的操作，比如更新数据库
			//写入数据表
			oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
			",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
			",HFileClsID,HSourceBillNo" +
			") values('"
			+ filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
			",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
			"','" + 0 + "','" + HBillNo +
			"') ");
			}
			else
			{
			Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
			}
			}

			}
			catch (Exception e)
			{
			Result_Ob = new { result = 0, returnval = e.Message };
			}
			return Result_Ob;
			}

			/// <summary>
			/// 根据单据号查找上传文件列表
			/// </summary>
			/// <param name="sWhere"></param>
			/// <returns></returns>
			[Route("Sc_MouldDotCheckBill/Filelist")]
			[HttpGet]
			public object Filelist(string HBillNo)
			{
			var url = fileip + "/files/MouldFolder/" + HBillNo + "/";
			//@"C:\\files\\"
			try
			{
			ds = oCN.RunProcReturn("select *,'" + url + "'+CAST(HFileName as varchar(200))as url from MES_AccessoriesList where HSourceBillNo='" + HBillNo + "'", "MES_AccessoriesList");
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			/// <summary>
			/// 根据ID,单据号,文件名删除文件
			/// </summary>
			/// <param name="sWhere"></param>
			/// <returns></returns>
			[Route("Sc_MouldDotCheckBill/DeleteFilelist")]
			[HttpGet]
			public object DeleteFilelist(string HItemID, string HSourceBillNo, string HFileName)
			{
			try
			{

			oCN.RunProc("delete from MES_AccessoriesList where HItemID =" + HItemID);
			string fileurl = Path.Combine(HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HSourceBillNo), HFileName);
			File.Delete(fileurl); //删除指定文件
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "删除成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region 器具保养记录拍照上传
			[Route("Sc_MouldMaintainBill/UploadFile")]
			[HttpPost]
			public object UploadFile_Maintain()
			{

			string HBillNo = HttpContext.Current.Request.Params["HBillNo"]; //单据号
			string HRemark = HttpContext.Current.Request.Params["HRemark"]; //备注
			string HUserName = HttpContext.Current.Request.Params["HUserName"]; //创建人
			HttpPostedFile files = HttpContext.Current.Request.Files["file"];
			string path = HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HBillNo);
			//string path = @"D:\\Files\\"+ HBillNo;
			dynamic dyResult = UpLoadFile_Maintain(files, path, HBillNo, HRemark, HUserName);
			if (dyResult != null && dyResult.result == 1)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "上传成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = dyResult.returnval;
			objJsonResult.data = null;
			return objJsonResult;
			}

			}

			public dynamic UpLoadFile_Maintain(HttpPostedFile files, string path, string HBillNo, string HRemark, string HUserName)
			{
			dynamic Result_Ob = new { result = 1, returnval = "上传成功！" };
			string filePath = Path.GetFullPath(files.FileName);//文件上传路径
			string fileExtension = Path.GetExtension(files.FileName);// 文件扩展名
			string filename = files.FileName;//文件名
			string fileSavePath = path;// 上传保存路径
			int filesize = files.ContentLength;//获取上传文件的大小单位为字节byte
			int Maxsize = 40000 * 1024;//定义上传文件的最大空间大小为40M
			try
			{
			if (files == null \|\| files.ContentLength <= 0)
			{
			Result_Ob = new { result = 0, returnval = "文件不能为空!" };
			return Result_Ob;
			}
			if (filesize >= Maxsize)
			{
			Result_Ob = new { result = 0, returnval = "上传文件超过40M，不能上传！" };
			return Result_Ob;
			}

			string fileurl = Path.Combine(fileSavePath, filename);
			if (Directory.Exists(fileurl) == true) //如果存在重名文件就提示
			{
			Result_Ob = new { result = 0, returnval = "存在同名文件！" };
			return Result_Ob;
			}
			//删除数据表数据
			ds = oCN.RunProcReturn("delete from MES_AccessoriesList where HSourceBillNo ='" + HBillNo + "' and HFileName='" + filename + "'", "MES_AccessoriesList");
			if (Directory.Exists(path))
			{
			File.Delete(fileurl); //删除指定文件
			files.SaveAs(fileurl);
			string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
			if (File.Exists(fileurl))
			{
			//这里可以执行一些其它的操作，比如更新数据库
			//写入数据表
			oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
			",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
			",HFileClsID,HSourceBillNo" +
			") values('"
			+ filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
			",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
			"','" + 0 + "','" + HBillNo +
			"') ");
			}
			else
			{
			Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
			}
			}
			else
			{
			Directory.CreateDirectory(fileSavePath); //添加文件夹
			files.SaveAs(fileurl);
			string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
			if (File.Exists(fileurl))
			{
			//这里可以执行一些其它的操作，比如更新数据库
			//写入数据表
			oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
			",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
			",HFileClsID,HSourceBillNo" +
			") values('"
			+ filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
			",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
			"','" + 0 + "','" + HBillNo +
			"') ");
			}
			else
			{
			Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
			}
			}

			}
			catch (Exception e)
			{
			Result_Ob = new { result = 0, returnval = e.Message };
			}
			return Result_Ob;
			}

			/// <summary>
			/// 根据单据号查找上传文件列表
			/// </summary>
			/// <param name="sWhere"></param>
			/// <returns></returns>
			[Route("Sc_MouldMaintainBill/Filelist")]
			[HttpGet]
			public object Filelist_Maintain(string HBillNo)
			{
			var url = fileip + "/files/MouldFolder/" + HBillNo + "/";
			//@"C:\\files\\"
			try
			{
			ds = oCN.RunProcReturn("select *,'" + url + "'+CAST(HFileName as varchar(200))as url from MES_AccessoriesList where HSourceBillNo='" + HBillNo + "'", "MES_AccessoriesList");
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			/// <summary>
			/// 根据ID,单据号,文件名删除文件
			/// </summary>
			/// <param name="sWhere"></param>
			/// <returns></returns>
			[Route("Sc_MouldMaintainBill/DeleteFilelist")]
			[HttpGet]
			public object DeleteFilelist_Maintain(string HItemID, string HSourceBillNo, string HFileName)
			{
			try
			{

			oCN.RunProc("delete from MES_AccessoriesList where HItemID =" + HItemID);
			string fileurl = Path.Combine(HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HSourceBillNo), HFileName);
			File.Delete(fileurl); //删除指定文件
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "删除成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			}
			}