维修验收单 选维修记录单 带出数据

yangle

2022-12-19 cbb4d47b6f79fa8663697862a975ed94acfb76be

 WebAPI/Controllers/Sc_CheckToolsRepairWorkBillListController.cs

@@ -16,11 +16,14 @@

        private json objJsonResult = new json();
        public DataSet ds = new DataSet();
        public SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
        public WebServer webserver = new WebServer();

        public DAL.ClsSc_MouldScrapInBill BillNew0 = new DAL.ClsSc_MouldScrapInBill();   //模具报废入库对应单据类
        public DAL.ClsSc_MouldScrapInBill BillOld0 = new DAL.ClsSc_MouldScrapInBill();   //模具报废入库对应单据类

        public DLL.ClsSc_MouldRepairInBill BillNew01 = new DLL.ClsSc_MouldRepairInBill();   //模具改制入库对应单据类
        public DLL.ClsSc_MouldRepairInBill BillOld01 = new DLL.ClsSc_MouldRepairInBill();   //模具改制入库对应单据类

        /// <summary>
        /// 根据包装单 返回此包装单内的相关信息
@@ -1422,7 +1425,7 @@
        //public object DeltetMouldRepairWorkBill(string HInterID)
        //{
        //    //编辑权限
        //    //if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
        //    //if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, false, DBUtility.ClsPub.CurUserName))
        //    //{
        //    //    objJsonResult.code = "0";
        //    //    objJsonResult.count = 0;
@@ -1509,7 +1512,7 @@
        //    try
        //    {
        //        //审核权限
        //        if (!DBUtility.ClsPub.Security_Log(ModRightNameCheck, 1, true, CurUserName))
        //        if (!DBUtility.ClsPub.Security_Log(ModRightNameCheck, 1, false, CurUserName))
        //        {
        //            objJsonResult.code = "0";
        //            objJsonResult.count = 0;
@@ -1841,7 +1844,7 @@
        //public object DeltetMouldRepairCheckBill(string HInterID)
        //{
        //    //编辑权限
        //    //if (!DBUtility.ClsPub.Security_Log("Sc_MouldRepairCheckBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
        //    //if (!DBUtility.ClsPub.Security_Log("Sc_MouldRepairCheckBill_Delete", 1, false, DBUtility.ClsPub.CurUserName))
        //    //{
        //    //    objJsonResult.code = "0";
        //    //    objJsonResult.count = 0;
@@ -2122,7 +2125,7 @@
        //public object DeltetMouldConkBookBill(string HInterID)
        //{
        //    //编辑权限
        //    //if (!DBUtility.ClsPub.Security_Log("Sc_MouldConkBookBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
        //    //if (!DBUtility.ClsPub.Security_Log("Sc_MouldConkBookBill_Delete", 1, false, DBUtility.ClsPub.CurUserName))
        //    //{
        //    //    objJsonResult.code = "0";
        //    //    objJsonResult.count = 0;
@@ -2393,7 +2396,7 @@
        //public object DeltetMouldMaintainPlanBill(string HInterID)
        //{
        //    //编辑权限
        //    //if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
        //    //if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, false, DBUtility.ClsPub.CurUserName))
        //    //{
        //    //    objJsonResult.code = "0";
        //    //    objJsonResult.count = 0;
@@ -2994,7 +2997,7 @@
        //public object DeltetSc_MouldDotCheckBill(string HInterID)
        //{
        //    //编辑权限
        //    //if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
        //    //if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, false, DBUtility.ClsPub.CurUserName))
        //    //{
        //    //    objJsonResult.code = "0";
        //    //    objJsonResult.count = 0;
@@ -3267,7 +3270,7 @@
        //public object DeltetSc_MouldDotCheckPlanBillBill(string HInterID)
        //{
        //    //编辑权限
        //    //if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
        //    //if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, false, DBUtility.ClsPub.CurUserName))
        //    //{
        //    //    objJsonResult.code = "0";
        //    //    objJsonResult.count = 0;
@@ -3994,7 +3997,7 @@
        //public object DeltetMouldScrapOutHouseBill(string HInterID)
        //{
        //    //编辑权限
        //    //if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
        //    //if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Delete", 1, false, DBUtility.ClsPub.CurUserName))
        //    //{
        //    //    objJsonResult.code = "0";
        //    //    objJsonResult.count = 0;
@@ -4081,7 +4084,7 @@
        //    try
        //    {
        //        //审核权限
        //        if (!DBUtility.ClsPub.Security_Log(ModRightNameCheck, 1, true, CurUserName))
        //        if (!DBUtility.ClsPub.Security_Log(ModRightNameCheck, 1, false, CurUserName))
        //        {
        //            objJsonResult.code = "0";
        //            objJsonResult.count = 0;
@@ -4209,14 +4212,24 @@

        #region 器具改制入库单据维护列表

        [Route("Sc_MouldRepairInBillList/GetMouldRepairInBillList")]
        [Route("Sc_CheckToolsRepairWorkBillList/GetMouldRepairInBillList")]
        [HttpGet]
        public object GetMouldRepairInBillList(string sWhere)
        public object GetMouldRepairInBillList(string sWhere,string user, string Organization)
        {
            try
            {
                //编辑权限
                if (!DBUtility.ClsPub.Security_Log("Sc_MouldRepairIn_SingleBillList", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                ds = Sc_MouldRepairInBillList(sWhere);
                ds = Sc_MouldRepairInBillList(sWhere,Organization);

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "返回记录成功！";
@@ -4233,38 +4246,21 @@
            }
        }

        public static DataSet Sc_MouldRepairInBillList(string sWhere)
        public static DataSet Sc_MouldRepairInBillList(string sWhere,string Organization)
        {
            string sql1 = string.Format(@"select * from h_v_Sc_MouldRepairInBillList where 库存组织='" + Organization + "'");
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairInBillList ", "h_v_Sc_MouldRepairInBillList");
                return new SQLHelper.ClsCN().RunProcReturn(sql1 + "order by 制单日期 desc", "h_v_Sc_MouldRepairInBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldRepairInBillList where 1 = 1 ";
                string sql = sql1 + sWhere;
                string sql = sql1 + sWhere+ "order by 制单日期 desc";
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairInBillList");
            }

        }

        #endregion

        #region[器具改制入库单编辑时获取表头数据]
        [Route("Sc_MouldRepairInBill/Sc_MouldRepairInBillListCheckDetail")]
        [HttpGet]
        public ApiResult<DataSet> Sc_MouldRepairInBillListCheckDetail(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();

            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldRepairInBillList  where hmainid= " + HID + " ", "h_v_Sc_MouldRepairInBillList");
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在退库单号" };

            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        #endregion

        #region[器具改制入库单编辑时获取表体数据]
@@ -4273,35 +4269,43 @@
        public object Sc_MouldRepairInBillListCheckDetai(string sqlWhere)
        {
            DataSet ds;
            DataSet ds1;
            List<object> list = new List<object>();
            try
            {
                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                if (sqlWhere == null || sqlWhere.Equals(""))
                {
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID 模具代码,设计寿命,剩余寿命,累积使用寿命,HWHID 仓库,
                                                  HSPID 仓位代码,模具新规格,最后生产产品,退库类型,
                                                  表头备注  FROM h_v_Sc_MouldRepairInBillList"), "h_v_Sc_MouldRepairInBillList");
                    ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,
                                          批次 HBatchNo,设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife,应收数量 HQtyMust,
                                          实收数量 HQty, HWHID, 仓库代码 HWHCode,仓库 HWHName,子备注 HRemark,HStockOrgID,HUnitID,计量单位代码 HUnitCode,计量单位 HUnitName 
                                          FROM h_v_Sc_MouldRepairInBillList"), "h_v_Sc_MouldRepairInBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
          
                }
                else
                {

                    //string sql1 = "select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark  from Sc_MouldRepairCheckBillSub where 1 = 1 ";
                    string sql1 = string.Format(@"SELECT HMaterID 模具代码,设计寿命,剩余寿命,累积使用寿命,HWHID 仓库,
                                                  HSPID 仓位代码,模具新规格,最后生产产品,退库类型,
                                                  表头备注  FROM h_v_Sc_MouldRepairInBillList where 1 = 1 ");
                    string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,
                                          批次 HBatchNo,设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 使用寿命 HUseLife,应收数量 HQtyMust,
                                          实收数量 HQty, HWHID, 仓库代码 HWHCode,仓库 HWHName,子备注 HRemark,HStockOrgID,HUnitID,计量单位代码 HUnitCode,计量单位 HUnitName 
                                          FROM h_v_Sc_MouldRepairInBillList where 1=1 "); 
                    string sql = sql1 + sqlWhere;
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldRepairInBillList");

                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "获取信息成功！";
                    objJsonResult.data = ds.Tables[0];
                }
                //查汇总
                ds1 = oCN.RunProcReturn(string.Format(@"select  物料代码,max(物料名称)物料名称,规格型号,max(单据号)单据号,批次,sum(实收数量)实收数量,
                                            hwhid,max(仓库代码)仓库代码,max(仓库)仓库,子备注 from h_v_Sc_MouldRepairInBillList 
                                            where 1=1 " + sqlWhere + " group by 物料代码,规格型号,hwhid,批次,子备注"), "h_v_Sc_MouldRepairInBillList");

                list.Add(ds.Tables[0]);
                list.Add(ds1.Tables[0]);
                objJsonResult.code = "0";
                objJsonResult.count = 1;
                objJsonResult.Message = "获取信息成功！";
                objJsonResult.list = list;
            }
            catch (Exception e)
            {
@@ -4329,23 +4333,83 @@
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();

            string refSav = sArray[2].ToString();
            string msg4 = sArray[3].ToString();

            string UserName = "";
            string s = "";
            ListModels oListModels = new ListModels();
            try
            {
                DLL.ClsSc_MouldProdBackBill oBill = new DLL.ClsSc_MouldProdBackBill();
                List<Model.ClsSc_MouldProdBackBillMain> lsmain = new List<Model.ClsSc_MouldProdBackBillMain>();
                //编辑权限
                if (!DBUtility.ClsPub.Security_Log("Sc_MouldRepairIn_SingleBill_Edit", 1, false, msg4))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无保存权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                DLL.ClsSc_MouldRepairInBill oBill = new DLL.ClsSc_MouldRepairInBill();
                List<Models.ClsSc_MouldRepairInBillMain> lsmain = new List<Models.ClsSc_MouldRepairInBillMain>();
                msg2 = msg2.Replace("\\", "");
                msg2 = msg2.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_MouldProdBackBillMain(msg2);
                foreach (Model.ClsSc_MouldProdBackBillMain oItem in lsmain)
                lsmain = oListModels.getObjectByJson_Gy_MouldRepairInHouseBillMain(msg2);
                foreach (Models.ClsSc_MouldRepairInBillMain oItem in lsmain)
                {
                    if (refSav == "Add")
                    {
                        //单据号是否重复
                        if (BillNew01.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, BillOld0.omodel.HInterID))
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "单据号重复！不允许保存！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                    }
                    if (refSav == "Update")
                    {
                        if (BillOld01.ShowBill(oItem.HInterID, ref s) == false)
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "此单据有误！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        //判断是否可编辑
                        if (BillOld0.omodel.HChecker != "" && BillOld0.omodel.HChecker != null)
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "此单据已经被审核，不允许修改！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        if (BillOld0.omodel.HBillStatus > 1)
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = "此单据处于不可编辑状态，不允许修改！";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                        if (!DBUtility.Xt_BaseBillFun.Fun_AllowEditBill(BillOld0, ref s))
                        {
                            objJsonResult.code = "0";
                            objJsonResult.count = 0;
                            objJsonResult.Message = s + "，不允许修改";
                            objJsonResult.data = 1;
                            return objJsonResult;
                        }
                    }
                    //oItem.HMaker = "";
                    UserName = oItem.HMaker;  //制单人
                    oItem.HBillType = "3803";
                    oItem.HBillSubType = "3803";
                    oItem.HBillType = "3826";
                    oItem.HBillSubType = "3826";
                    //oItem.HBillNo = "";    //单据号
                    //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));//  --日期
                    //oItem.HInnerBillNo = "";  //  --内部单据号
@@ -4380,10 +4444,10 @@
                msg3 = msg3.Replace("\\", "");
                msg3 = msg3.Replace("\n", "");  //\n
                //msg2 = msg2.Replace("'", "’");
                List<Model.ClsSc_MouldProdBackBillSub> ls = new List<Model.ClsSc_MouldProdBackBillSub>();
                ls = oListModels.getObjectByJson_Gy_MouldProdBackBillSub(msg3);
                List<Models.ClsSc_MouldRepairInBillSub> ls = new List<Models.ClsSc_MouldRepairInBillSub>();
                ls = oListModels.getObjectByJson_Gy_MouldRepairInHouseBillSub(msg3);
                int i = 0;
                foreach (Model.ClsSc_MouldProdBackBillSub oItemSub in ls)
                foreach (Models.ClsSc_MouldRepairInBillSub oItemSub in ls)
                {

                    i++;
@@ -4415,10 +4479,17 @@
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    //保存成功
                    string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus  'in','{oBill.omodel.HInterID.ToString()}' ");
                    oCn.RunProc(sql);
                }
                else
                {
                    bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                    //修改成功
                    //string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID  1,{oBill.omodel.HInterID.ToString()},' ' ");
                    string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
                    oCn.RunProc(sql);
                }
                if (bResult)
                {
@@ -4449,6 +4520,223 @@
        }
        #endregion

        #region [器具改制入库单审核、反审核]
        /// <summary>
        /// 审核
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Sc_MouldRepairInBill/set_CheckBill")]
        [HttpGet]
        public object set_CheckBill(int HInterID, string CurUserName)
        {
            string ModRightNameCheck = "Sc_MouldRepairInBill_Check";
            DBUtility.ClsPub.CurUserName = CurUserName;
            DLL.ClsSc_MouldRepairInBill oBill = new DLL.ClsSc_MouldRepairInBill();
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log(ModRightNameCheck, 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                //审核前判断是否允许
                string s = "";
                if (!DBUtility.Xt_BaseBillFun.Fun_AllowCheckBill(oBill, ref s))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = s + "，不允许审核";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                if (HInterID <= 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HInterID小于0！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                Int64 lngBillKey = 0;
                lngBillKey = DBUtility.ClsPub.isLong(HInterID);
                //查看是否已审核,关闭,作废
                if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
                {
                    if (oBill.omodel.HCloseMan.Trim() != "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据已关闭!不能再次审核！";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    if (oBill.omodel.HDeleteMan.Trim() != "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据已作废!不能再次审核！";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    if (oBill.omodel.HChecker.Trim() != "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据已审核!不能再次审核！";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                //审核提交
                if (oBill.CheckBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
                {
                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核成功";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "审核失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        /// <summary>
        /// 反审核
        /// </summary>
        /// <param name="HInterID">单据ID</param>
        /// <param name="CurUserName">审核人</param>
        /// <returns></returns>
        [Route("Sc_MouldRepairInBill/set_AbandonCheck")]
        [HttpGet]
        public object set_AbandonCheck(int HInterID, string CurUserName)
        {
            string ModRightNameCheck = "Sc_MouldRepairInBill_Check";
            DBUtility.ClsPub.CurUserName = CurUserName;
            DLL.ClsSc_MouldRepairInBill oBill = new DLL.ClsSc_MouldRepairInBill();
            try
            {
                //审核权限
                if (!DBUtility.ClsPub.Security_Log(ModRightNameCheck, 1, false, CurUserName))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "反审核失败！无权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                //反审核前判断
                string s = "";
                if (!DBUtility.Xt_BaseBillFun.Fun_AllowCheckBill(oBill, ref s))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = s + "，不允许反审核";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                if (HInterID <= 0)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "HInterID小于0！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                Int64 lngBillKey = 0;
                lngBillKey = DBUtility.ClsPub.isLong(HInterID);
                //查看是否已审核,关闭,作废
                if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
                {
                    if (oBill.omodel.HCloseMan.Trim() != "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据已关闭!不能再次反审核！";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    if (oBill.omodel.HDeleteMan.Trim() != "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据已作废!不能再次反审核！";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    if (oBill.omodel.HChecker.Trim() == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "单据未审核!不需要反审核!";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                //反审核提交AbandonCheck
                if (oBill.AbandonCheck(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
                {
                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核成功";
                    objJsonResult.data = null;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "1";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "反审核失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = null;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "反审核失败！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region [器具改制入库单删除功能]
        /// <summary>
        /// 器具改制入库单删除功能
@@ -4456,17 +4744,17 @@
        /// <returns></returns>
        [Route("Sc_MouldRepairInBill/DeltetMouldRepairInBill")]
        [HttpGet]
        public object DeltetMouldRepairInBill(string HInterID)
        public object DeltetMouldRepairInBill(string HInterID,string user)
        {
            //编辑权限
            //if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
            //{
            //    objJsonResult.code = "0";
            //    objJsonResult.count = 0;
            //    objJsonResult.Message = "无删除权限！";
            //    objJsonResult.data = null;
            //    return objJsonResult;
            //}
            if (!DBUtility.ClsPub.Security_Log("Sc_MouldRepairIn_SingleBill_Delete", 1, false, user))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无删除权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }


            Int64 lngBillKey = 0;
@@ -4498,10 +4786,21 @@
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                //删除前查找当前单据的所有器具ID
                //string swhere = "";
                //DataSet ds = oCn.RunProcReturn("select HMaterID from Sc_MouldStockBillSub where HinterID=" + HInterID, "Sc_MouldStockBillSub");
                //for (var i = 0; i < ds.Tables[0].Rows.Count; i++)
                //{
                //    swhere = swhere + ds.Tables[0].Rows[i]["HMaterID"].ToString() + ",";
                //}
                //swhere = swhere.Substring(0, swhere.Length - 1);
                bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                if (IsDete)
                {
                    //删除成功修改器具档案位置
                    //string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID  0,0,'{swhere}' ");
                    string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
                    oCn.RunProc(sql);
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
@@ -4529,6 +4828,106 @@
        }
        #endregion

        #region[模具改制入库单编辑时获取表头数据]
        [Route("Sc_CheckToolsRepairWorkBillList/Sc_MouldRepairInHouseBillListCheckDetai")]
        [HttpGet]
        public ApiResult<DataSet> Sc_MouldRepairInHouseBillListCheckDetai(string HID)
        {
            if (string.IsNullOrEmpty(HID))
                return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
            SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();

            var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldRepairInBillList  where hmainid= " + HID + " ", "h_v_Sc_MouldRepairInBillList");
            if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
                return new ApiResult<DataSet> { code = -1, msg = "不存在单号" };

            return new ApiResult<DataSet> { code = 1, msg = "查询成功", data = dataSet };
        }
        #endregion

        #region 器具改制入库单审核/反审核
        [Route("Sc_MouldRepairInBill/AuditMouldRepairInBill")]
        [HttpGet]
        public object AuditMouldRepairInBill(string HInterID, string user, int flag)
        {
            //flag=1 审核；  flag=2 反审核
            //编辑权限
            if (!DBUtility.ClsPub.Security_Log_second("Sc_MouldRepairIn_SingleBill_Check", 1, false, user))
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "无审核权限！";
                objJsonResult.data = null;
                return objJsonResult;
            }

            Int64 lngBillKey = 0;
            lngBillKey = DBUtility.ClsPub.isLong(HInterID);
            if (lngBillKey == 0)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "单据ID为空！";
                objJsonResult.data = null;
                return objJsonResult;
            }
            DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
            if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
            {
                if (flag == 1)
                {
                    if (oBill.omodel.HBillStatus == 2)
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "当前单据已审核，无需再次审核";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    else
                    {
                        string HCheckDate = DateTime.Now.Date.ToString();
                        oCn.RunProc(" Update Sc_MouldStockBillMain set HChecker ='" + user + "',HCheckDate='" + HCheckDate + "',HBillStatus=2 Where HBillType='3826' and HInterID=" + HInterID);
                        objJsonResult.code = "0";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "审核成功！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                }
                else
                {
                    if (oBill.omodel.HBillStatus == 1)
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "当前单据未审核，无需反审核";
                        objJsonResult.data = null;
                        return objJsonResult;
                    }
                    else
                    {
                        string HCheckDate = DateTime.Now.Date.ToString();
                        oCn.RunProc(" Update Sc_MouldStockBillMain set HChecker=' ',HCheckDate=' ',HBillStatus=1 Where HBillType='3826' and HInterID=" + HInterID);
                        objJsonResult.code = "0";
                        objJsonResult.count = 1;
                        objJsonResult.Message = "反审核成功！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                }

            }
            else
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "单据未找到";
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion
        #endregion

        //#region 模具领用单
@@ -4787,7 +5186,7 @@
        //public object DeltetMouldProdOutBill(string HInterID)
        //{
        //    //编辑权限
        //    //if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
        //    //if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Delete", 1, false, DBUtility.ClsPub.CurUserName))
        //    //{
        //    //    objJsonResult.code = "0";
        //    //    objJsonResult.count = 0;
@@ -4936,7 +5335,7 @@
        //                                                   HSecUnitID, 辅助计量单位代码 HSecUnitCode, 辅助计量单位 HSecUnitName,换算率 HSecUnitRate,
        //                                                   HUnitID, 计量单位代码 HUnitCode, 计量单位 HUnitName,
        //                                                   设计寿命 HDesignLife, 原剩余寿命 HLeaveLife, 新剩余寿命 HNewLife,表体备注 HRemark 
          //                                                FROM h_v_Sc_MouldLifeChangeBillList_Edit"), "h_v_Sc_MouldLifeChangeBillList_Edit");
        //                                                FROM h_v_Sc_MouldLifeChangeBillList_Edit"), "h_v_Sc_MouldLifeChangeBillList_Edit");

        //            objJsonResult.code = "0";
        //            objJsonResult.count = 1;
@@ -4951,7 +5350,7 @@
        //                                          HSecUnitID, 辅助计量单位代码 HSecUnitCode, 辅助计量单位 HSecUnitName,换算率 HSecUnitRate,
        //                                          HUnitID, 计量单位代码 HUnitCode, 计量单位 HUnitName,
        //                                          设计寿命 HDesignLife, 原剩余寿命 HLeaveLife, 新剩余寿命 HNewLife,表体备注 HRemark 
          //                                       FROM h_v_Sc_MouldLifeChangeBillList_Edit where 1 = 1 ");
        //                                       FROM h_v_Sc_MouldLifeChangeBillList_Edit where 1 = 1 ");
        //            string sql = sql1 + sqlWhere;
        //            ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldLifeChangeBillList_Edit");

@@ -5117,7 +5516,7 @@
        //public object DeltetMouldLifeChangeBill(string HInterID)
        //{
        //    //编辑权限
        //    //if (!DBUtility.ClsPub.Security_Log("Sc_MouldLifeChangeBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
        //    //if (!DBUtility.ClsPub.Security_Log("Sc_MouldLifeChangeBill_Delete", 1, false, DBUtility.ClsPub.CurUserName))
        //    //{
        //    //    objJsonResult.code = "0";
        //    //    objJsonResult.count = 0;