MES-WEB-API.git

			@@ -4,9 +4,12 @@
			using System;
			using System.Collections.Generic;
			using System.Data;
			using System.IO;
			using System.Web;
			using System.Web.Http;
			using ViewAPI;
			using WebAPI.Models;
			using SyntacticSugar.constant;
			namespace WebAPI.Controllers
			{
			/**
			@@ -22,9 +25,11 @@
			public SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
			public DAL.ClsSc_ICMOBill BillOld = new DAL.ClsSc_ICMOBill();
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			Pub_Class.ClsXt_SystemParameter oSystemParameter = new Pub_Class.ClsXt_SystemParameter();

			public DAL.ClsSc_MouldScrapInBill BillNew0 = new DAL.ClsSc_MouldScrapInBill(); //模具报废入库对应单据类
			public DAL.ClsSc_MouldScrapInBill BillOld0 = new DAL.ClsSc_MouldScrapInBill(); //模具报废入库对应单据类
			string fileip = System.Configuration.ConfigurationManager.AppSettings["FileIP"];


			/// <summary>
			@@ -238,6 +243,63 @@
			}
			}

			/// <summary>
			/// 模具保养记录表分页列表
			/// </summary>
			/// <returns></returns>
			[Route("Sc_MouldMaintainBill/GetMouldMaintainBillListPage")]
			[HttpGet]
			public object GetMouldMaintainBillListPage(string sWhere, string user, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();

			if (!DBUtility.ClsPub.Security_Log("Sc_MouldMaintainBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}


			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldMaintainList " + page + "," + size + ",''", "h_p_Sc_MouldMaintainList");
			}
			else
			{
			sWhere = sWhere.Replace("'", "''");
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldMaintainList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldMaintainList");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#region sql语句


			@@ -356,6 +418,63 @@
			}
			}


			/// <summary>
			/// 模具点检记录表分页列表
			/// </summary>
			/// <returns></returns>
			[Route("Sc_MouldDotCheckBill/GetMouldDotCheckBillListPage")]
			[HttpGet]
			public object GetMouldDotCheckBillListPage(string sWhere, string user, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldDotCheckBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldDotCheckBillList " + page + "," + size + ",''", "h_p_Sc_MouldDotCheckBillList");
			}
			else
			{
			sWhere = sWhere.Replace("'", "''");
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldDotCheckBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldDotCheckBillList");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}


			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#region sql语句


			@@ -425,6 +544,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldMaintainPlanBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			@@ -436,12 +556,21 @@

			ds = Sc_MouldMaintainPlanBillList_s(sWhere);

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			//}
			//else
			@@ -520,6 +649,63 @@
			}
			}

			/// <summary>
			/// 模具故障登记表分页列表
			/// </summary>
			/// <returns></returns>
			[Route("Sc_MouldConkBookBill/GetMouldConkBookBillListPage")]
			[HttpGet]
			public object GetMouldConkBookBillListPage(string sWhere, string user, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldConkBookBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldConkBookBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldConkBookBillList");
			}
			else
			{
			sWhere = sWhere.Replace("'", "''");
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldConkBookBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldConkBookBillList");
			}


			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}


			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#region 器具故障记录统计分析
			/// <summary>
			/// 器具维修记录统计分析列表
			@@ -592,6 +778,49 @@
			}
			#endregion

			#region 器具寿命耗用分析报表
			[Route("Sc_MouldRepairInBillList/Get_Sc_MouldLifeUsePicReport")]
			[HttpGet]
			public object Get_Sc_MouldLifeUsePicReport(string sWhere)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("select * from h_v_Sc_MouldLifeUsePicReport order by 月份 desc", "h_v_Sc_MouldLifeUsePicReport");
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldLifeUsePicReport where 1 = 1 ";
			string sql = sql1 + sWhere + " order by 日期 ";
			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldLifeUsePicReport");
			}
			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion


			/// <summary>
			@@ -627,6 +856,62 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			/// <summary>
			/// 模具维修验收单分页列表
			/// </summary>
			/// <returns></returns>
			[Route("Sc_MouldRepairCheckBill/GetMouldRepairCheckBillListPage")]
			[HttpGet]
			public object GetMouldRepairCheckBillListPage(string sWhere, string user, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sb_EquipRepairCheckBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}


			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldRepairCheckBillList " + page + "," + size + ",''", "h_p_Sc_MouldRepairCheckBillList");
			}
			else
			{
			sWhere = sWhere.Replace("'", "''");
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldRepairCheckBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldRepairCheckBillList");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.list = columnNameList;
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			@@ -710,81 +995,7 @@
			//}
			#endregion

			/// <summary>
			/// 模具维修工单表列表
			/// </summary>
			/// <returns></returns>
			[Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBillList")]
			[HttpGet]
			public object GetMouldRepairWorkBillList(string sWhere,string user)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ds = Sc_MouldRepairWorkBillList_s(sWhere);

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			//}
			//else
			//{
			//objJsonResult.code = "0";
			//objJsonResult.count = 0;
			//objJsonResult.Message = "无数据";
			//objJsonResult.data = null;
			//return objJsonResult;
			//}
			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#region sql语句


			public static DataSet Sc_MouldRepairWorkBillList_s(string sWhere)
			{
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList where 1=1 " + sWhere+ " order by hmainid desc", "h_v_Sc_MouldRepairWorkBillList");
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList where 1 = 1 ";
			string sql = sql1 + sWhere + "order by hmainid desc";
			return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList");
			}
			}
			#endregion



			/// <summary>
			@@ -1013,13 +1224,24 @@

			oItemSub.HCloseType = false; //关闭类型

			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceInterID = 0; // 源单主内码
			//oItemSub.HSourceEntryID = 0; //源单子内码


			oBill.DetailColl.Add(oItemSub);

			}

			//进行会计期间结账的判断和控制
			int sYear = 0;
			int sPeriod = 0;
			DateTime HDate = DateTime.Now;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.Message = s;
			return objJsonResult;
			}

			//保存
			//保存完毕后处理
			bool bResult;
			@@ -1065,7 +1287,7 @@
			}
			#endregion

			#region 其他入库单编辑页面初始化
			#region 直接调拨单编辑页面初始化
			[Route("Kf_MoveStockBill/Kf_MoveStockBillEdit")]
			[HttpGet]
			public object Kf_MoveStockBillEdit(long HInterID)
			@@ -1105,7 +1327,7 @@
			}
			#endregion

			#region 其它入库单审核/反审核功能
			#region 直接调拨单审核/反审核功能
			[Route("Kf_MoveStockBill/CheckKf_MoveStockBill")]
			[HttpGet]
			public object CheckKf_MoveStockBill(string HInterID, int Type, string user)
			@@ -1163,12 +1385,20 @@
			return objJsonResult;
			}

			//进行会计期间结账的判断和控制
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			DateTime HDate = DateTime.Now;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.Message = s;
			return objJsonResult;
			}

			ClsPub.CurUserName = user;
			BillOld.MvarItemKey = "Kf_ICStockBillMain";
			oCN.BeginTran();//开始事务



			//Type 1 审核 2 反审核
			if (Type == 1)
			@@ -1267,7 +1497,6 @@
			}
			//===========================================================


			//反审核单据
			if (oBill.AbandonCheck(oBill.omodel.HInterID, oBill.omodel.HBillNo, "h_p_Kf_MoveStockBill_AfterUnCheckCtrl", user, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			@@ -1303,7 +1532,7 @@
			}
			#endregion

			#region 其它入库单关闭/反关闭功能
			#region 直接调拨单关闭/反关闭功能
			[Route("Kf_MoveStockBill/CloseKf_MoveStockBill")]
			[HttpGet]
			public object CloseKf_MoveStockBill(string HInterID, int Type, string user)
			@@ -1409,7 +1638,7 @@
			}
			#endregion

			#region 其他入库单作废/反作废功能
			#region 直接调拨单作废/反作废功能
			[Route("Kf_MoveStockBill/DropKf_MoveStockBill")]
			[HttpGet]
			public object DropKf_MoveStockBill(string HInterID, int Type, string user)
			@@ -1539,8 +1768,7 @@
			}
			#endregion


			#region 调拨单列表
			#region 直接调拨单列表
			/// <summary>
			/// 调拨单列表
			/// </summary>
			@@ -1551,6 +1779,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_MoveStockBillQuery", 1, false, user))
			{
			@@ -1570,11 +1799,18 @@
			string sql = "select * from h_v_IF_MoveStockBillList where 1=1 " + sWhere+ "order by hmainid desc";
			ds = oCN.RunProcReturn(sql, "h_v_IF_MoveStockBillList");
			}
			foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
			{
			Type dataType = col.DataType; //获取当前数据类型传入自定义变量datadataType
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接 // 将列名和数据类型信息拼接成一个JSON格式的字符串
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;

			}
			@@ -1589,7 +1825,7 @@
			}
			#endregion

			#region 调拨单删除
			#region 直接调拨单删除
			[Route("Kf_MoveStockBill/DelteteGetMoveStockBill")]
			[HttpGet]
			public object DelteteGetMoveStockBill(string HInterID, string user)
			@@ -1631,7 +1867,21 @@
			}
			//==================================================================================

			//进行会计期间结账的判断和控制
			int sYear = 0;
			int sPeriod = 0;
			DateTime HDate = DateTime.Now;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.Message = s;
			return objJsonResult;
			}

			oCN.BeginTran();

			//直接调拨单删除撤销回填调拨申请单关联数量
			oCN.RunProc("exec h_p_Kf_UpDateRelation_MoveStockRequestToPOStockIn_Del " + HInterID);

			oCN.RunProc("Delete From Kf_ICStockBillMain where HInterID = " + HInterID);
			oCN.RunProc("Delete From Kf_ICStockBillSub where HInterID = " + HInterID);

			@@ -1679,6 +1929,43 @@
			}
			#endregion

			#region 直接调拨单根据主内码与子内码获取调拨申请单数据
			[Route("Kf_MoveStockBill/loadKf_MoveStockBillMain_Push")]
			[HttpGet]
			public object loadKf_MoveStockBillMain_Push(long HInterID, long HSubID)
			{
			try
			{

			ds = oCN.RunProcReturn("select * from h_v_IF_MoveStockRequestBillList_Litee where hmainid =" + HInterID + " and hsubid = " + HSubID, "h_v_IF_MoveStockRequestBillList_Litee");
			if (ds == null \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "未查询到源单信息！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#endregion


			@@ -1692,6 +1979,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_SellOutBillQuery", 1, false, user))
			{
			@@ -1703,6 +1991,12 @@
			}

			ds = Sc_GetSellOutBillList(sWhere);
			foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
			{
			Type dataType = col.DataType; //获取当前数据类型传入自定义变量datadataType
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接 // 将列名和数据类型信息拼接成一个JSON格式的字符串
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			@@ -1710,6 +2004,7 @@
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			//}
			//else
			@@ -1730,6 +2025,66 @@
			return objJsonResult;
			}
			}

			#region 销售出库单列表-分页
			/// <summary>
			/// 销售出库单列表
			/// </summary>
			/// <returns></returns>
			[Route("Kf_SellOutBill/GetSellOutBillList_byPage")]
			[HttpGet]
			public object GetSellOutBillList_byPage(string sWhere, string user, string Organization, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_SellOutBillQuery", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有查询权限!";
			objJsonResult.data = null;
			return objJsonResult;
			}

			sWhere = sWhere.Replace("'", "''");

			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_IF_SellOutBillList " + page + "," + size + ",'" + Organization + "'," + "''", "h_p_IF_SellOutBillList");
			}
			else
			{
			ds = oCN.RunProcReturn("exec h_p_IF_SellOutBillList " + page + "," + size + ",'" + Organization + "','" + sWhere + "'", "h_p_IF_SellOutBillList");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.list = columnNameList;
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			/// <summary>
			///销售出库单删除功能
			/// </summary>
			@@ -1777,7 +2132,7 @@
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:删除前判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;
			@@ -1786,23 +2141,36 @@
			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//==================================================================================

			//进行会计期间结账的判断和控制
			int sYear = 0;
			int sPeriod = 0;
			DateTime HDate = DateTime.Now;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.Message = s;
			return objJsonResult;
			}

			oCN.BeginTran();
			//销售出库删除回填销售订单关联数量
			//oCN.RunProc("exec h_p_Xs_UpDateRelation_SeOrderToSellOut_Delete " + HInterID);
			oCN.RunProc("exec h_p_Xs_UpDateRelation_SeOrderToSellOut_Delete " + HInterID);

			//oCN.RunProc("Delete From Kf_ICStockBillMain where HInterID = " + HInterID);
			//oCN.RunProc("Delete From Kf_ICStockBillSub where HInterID = " + HInterID);
			//销售出库删除回填收货通知单关联数量
			oCN.RunProc("exec h_p_Xs_UpDateRelation_SeOutStockToPOStockIn_Delete " + HInterID);

			string sql = "exec h_p_WMS_ICStockBillAndWMS_Delete " + BillOld.omodel.HInterID + ",'" + BillOld.omodel.HBillNo + "','1205'";
			oCn.RunProc(sql);

			oCN.RunProc("Delete From Kf_ICStockBillMain where HInterID = " + HInterID);
			oCN.RunProc("Delete From Kf_ICStockBillSub where HInterID = " + HInterID);

			//string sql = "exec h_p_WMS_ICStockBillAndWMS_Delete " + BillOld.omodel.HInterID + ",'" + BillOld.omodel.HBillNo + "','1205'";
			//oCn.RunProc(sql);

			//删除后控制==================================================================================
			string sql2 = "exec h_p_Kf_SellOutBill_AfterDelCtrl " + BillOld.omodel.HInterID + ",'" + BillOld.omodel.HBillNo + "','" + user + "'";
			@@ -1811,7 +2179,7 @@
			{
			s = "删除后判断失败，请与网络管理人员联系";
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:" + s;
			objJsonResult.data = null;
			oCN.RollBack();
			@@ -1821,7 +2189,7 @@
			{
			s = ds.Tables[0].Rows[0]["HRemark"].ToString();
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:" + s;
			objJsonResult.data = null;
			oCN.RollBack();
			@@ -1997,6 +2365,17 @@
			oBill.DetailColl.Add(oItemSub);

			}

			//进行会计期间结账的判断和控制
			int sYear = 0;
			int sPeriod = 0;
			DateTime HDate = DateTime.Now;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.Message = s;
			return objJsonResult;
			}

			//保存
			//保存完毕后处理
			bool bResult;
			@@ -2093,6 +2472,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_OtherOutBillQuery", 1, false, user))
			{
			@@ -2112,13 +2492,21 @@
			string sql = "select * from h_v_Kf_OtherOutBillList where 1 = 1 " + sWhere+ " order by hmainid desc";
			ds = oCN.RunProcReturn(sql, "h_v_Kf_OtherOutBillList");
			}

			foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
			{
			Type dataType = col.DataType; //获取当前数据类型传入自定义变量datadataType
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接 // 将列名和数据类型信息拼接成一个JSON格式的字符串
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}
			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)


			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.data = ds.Tables[0];//代码将第一个DataTable（索引为0）赋值给objJsonResult的data属性
			objJsonResult.list = columnNameList;//将columnNameList赋值给objJsonResult的list属性
			return objJsonResult;
			//}
			//else
			@@ -2200,6 +2588,17 @@
			return objJsonResult;
			}
			//==================================================================================

			//进行会计期间结账的判断和控制
			int sYear = 0;
			int sPeriod = 0;
			DateTime HDate = DateTime.Now;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.Message = s;
			return objJsonResult;
			}


			oCN.BeginTran();
			oCN.RunProc("Delete From Kf_ICStockBillMain where HInterID = " + HInterID);
			@@ -2306,6 +2705,17 @@
			objJsonResult.count = 0;
			objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}

			//进行会计期间结账的判断和控制
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			DateTime HDate = DateTime.Now;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.Message = s;
			return objJsonResult;
			}

			@@ -2789,57 +3199,6 @@
			}
			#endregion



			/// <summary>
			/// 产品入库单列表
			/// </summary>
			/// <returns></returns>
			[Route("Kf_ProductInBill/GetProductInBill")]
			[HttpGet]
			public object GetProductInBill(string sWhere,string user)
			{
			try
			{
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_ProductInBill_Query", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查询权限!";
			objJsonResult.data = null;
			return objJsonResult;
			}


			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("select * from h_v_IF_ProductInBillList where 1=1 order by hmainid desc", "h_v_IF_ProductInBillList");
			}
			else
			{
			string sql = "select * from h_v_IF_ProductInBillList where 1 = 1 " + sWhere + " order by hmainid desc";
			ds = oCN.RunProcReturn(sql, "h_v_IF_ProductInBillList");
			}


			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;

			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#region 条码明细
			[Route("Kf_ICStockBillSub_WMS/Kf_ICStockBillSub_WMS_List")]
			[HttpGet]
			@@ -2864,392 +3223,6 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			/// <summary>
			///产品入库单删除功能
			/// </summary>
			/// <returns></returns>
			[Route("Kf_ProductInBill/DeltetProductInBill")]
			[HttpGet]
			public object DeltetProductInBill(string HInterID)
			{
			try
			{
			oCN.BeginTran();
			oCN.RunProc("Delete From Kf_ICStockBillMain where HInterID = " + HInterID);
			oCN.RunProc("Delete From Kf_ICStockBillSub where HInterID = " + HInterID);
			oCN.Commit();
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "删除成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			catch (Exception e)
			{
			oCN.RollBack();
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#region 生产入库单审核/反审核功能
			[Route("Kf_ProductInBill/CheckKf_ProductInBill")]
			[HttpGet]
			public object CheckKf_ProductInBill(string HInterID, int Type, string user)
			{
			try
			{
			//判断是否有删除权限
			if (!DBUtility.ClsPub.Security_Log("Kf_ProductInBill_Check", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无权限审核!";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (string.IsNullOrWhiteSpace(HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID为空！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ClsPub.CurUserName = user;
			BillOld.MvarItemKey = "Kf_ICStockBillMain";
			oCN.BeginTran();//开始事务

			//Type 1 审核 2 反审核
			if (Type == 1)
			{
			//判断单据是否已经审核
			DataSet ds;
			string sql = "select * from " + BillOld.MvarItemKey + " where HinterID = " + HInterID;
			ds = oCN.RunProcReturn(sql, BillOld.MvarItemKey);
			if (ds.Tables[0] != null && ds.Tables[0].Rows.Count > 0)
			{
			if (ds.Tables[0].Rows[0]["HChecker"] != null && ds.Tables[0].Rows[0]["HChecker"].ToString() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已审核!不需要再审核!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			//审核单据
			if (!BillOld.CheckBill(Int64.Parse(HInterID), ref ClsPub.sExeReturnInfo))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			else
			{
			//判断单据是否已经反审核
			DataSet ds;
			string sql = "select * from " + BillOld.MvarItemKey + " where HinterID = " + HInterID;
			ds = oCN.RunProcReturn(sql, BillOld.MvarItemKey);
			if (ds.Tables[0] != null && ds.Tables[0].Rows.Count > 0)
			{
			if (ds.Tables[0].Rows[0]["HChecker"] == null \|\| ds.Tables[0].Rows[0]["HChecker"].ToString() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已反审核!不需要再反审核!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			//反审核单据
			if (BillOld.AbandonCheck(Int64.Parse(HInterID), ref ClsPub.sExeReturnInfo))
			{
			//SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
			//DataSet DSet = oCn.RunProcReturn("exec h_p_Sc_ICMOBill_AbandonCheckCtrl " + int.Parse(HInterID), "h_p_Sc_ICMOBill_AbandonCheckCtrl");
			////if (DBUtility.ClsPub.isInt(DSet.Tables[0].Rows[0]["Hback"]) != 0)
			////{
			//// objJsonResult.code = "0";
			//// objJsonResult.count = 1;
			//// objJsonResult.Message = "该任务单已下推流转卡，不允许反审核" + DBUtility.ClsPub.isStrNull(DSet.Tables[0].Rows[0]["HBackRemark"]);
			//// objJsonResult.data = null;
			//// return objJsonResult;
			////}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			oCN.Commit();//提交事务

			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "执行成功！";
			objJsonResult.data = null;
			return objJsonResult; ;

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "执行失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region 生产入库单关闭/反关闭功能
			[Route("Kf_ProductInBill/CloseKf_ProductInBill")]
			[HttpGet]
			public object CloseKf_ProductInBill(string HInterID, int Type, string user)
			{
			try
			{
			//判断是否有删除权限
			if (!DBUtility.ClsPub.Security_Log("Kf_ProductInBill_Close", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无权限关闭!";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (string.IsNullOrWhiteSpace(HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID为空！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ClsPub.CurUserName = user;
			BillOld.MvarItemKey = "Kf_ICStockBillMain";
			oCN.BeginTran();//开始事务

			//Type 1 关闭 2 反关闭
			if (Type == 1)
			{
			//判断单据是否已经关闭
			DataSet ds;
			string sql = "select * from " + BillOld.MvarItemKey + " where HinterID = " + HInterID;
			ds = oCN.RunProcReturn(sql, BillOld.MvarItemKey);
			if (ds.Tables[0] != null && ds.Tables[0].Rows.Count > 0)
			{
			if (ds.Tables[0].Rows[0]["HCloseMan"] != null && ds.Tables[0].Rows[0]["HCloseMan"].ToString() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不需要再关闭!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			//关闭单据
			if (!BillOld.CloseBill(Int64.Parse(HInterID), ref ClsPub.sExeReturnInfo))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "关闭失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			else
			{
			//判断单据是否已经反关闭
			DataSet ds;
			string sql = "select * from " + BillOld.MvarItemKey + " where HinterID = " + HInterID;
			ds = oCN.RunProcReturn(sql, BillOld.MvarItemKey);
			if (ds.Tables[0] != null && ds.Tables[0].Rows.Count > 0)
			{
			if (ds.Tables[0].Rows[0]["HCloseMan"] == null \|\| ds.Tables[0].Rows[0]["HCloseMan"].ToString() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已反关闭!不需要再反关闭!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			//反关闭单据
			if (!BillOld.CancelClose(Int64.Parse(HInterID), ref ClsPub.sExeReturnInfo))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "反关闭失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			oCN.Commit();//提交事务

			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "执行成功！";
			objJsonResult.data = null;
			return objJsonResult; ;

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "执行失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region 生产入库单作废/反作废功能
			[Route("Kf_ProductInBill/DropKf_ProductInBill")]
			[HttpGet]
			public object DropKf_ProductInBill(string HInterID, int Type, string user)
			{
			try
			{
			//判断是否有作废权限
			if (!DBUtility.ClsPub.Security_Log("Kf_ProductInBill_Drop", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无权限作废!";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (string.IsNullOrWhiteSpace(HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID为空！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ClsPub.CurUserName = user;
			BillOld.MvarItemKey = "Kf_ICStockBillMain";
			oCN.BeginTran();//开始事务

			//Type 1 作废 2 反作废
			if (Type == 1)
			{
			//判断单据是否已经作废
			DataSet ds;
			string sql = "select * from " + BillOld.MvarItemKey + " where HinterID = " + HInterID;
			ds = oCN.RunProcReturn(sql, BillOld.MvarItemKey);
			if (ds == null \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据不存在！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (ds.Tables[0] != null && ds.Tables[0].Rows.Count > 0)
			{
			if (ds.Tables[0].Rows[0]["HChecker"] != null && ds.Tables[0].Rows[0]["HChecker"].ToString() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已审核!不能进行作废!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (ds.Tables[0].Rows[0]["HDeleteMan"] != null && ds.Tables[0].Rows[0]["HDeleteMan"].ToString() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不需要再作废!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//作废单据
			if (!BillOld.Cancelltion(Int64.Parse(HInterID), ref ClsPub.sExeReturnInfo))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "作废失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			}
			else
			{
			//判断单据是否已经反作废
			DataSet ds;
			string sql = "select * from " + BillOld.MvarItemKey + " where HinterID = " + HInterID;
			ds = oCN.RunProcReturn(sql, BillOld.MvarItemKey);
			if (ds.Tables[0] != null && ds.Tables[0].Rows.Count > 0)
			{
			if (ds.Tables[0].Rows[0]["HChecker"] != null && ds.Tables[0].Rows[0]["HChecker"].ToString() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已审核!不能进行作废!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (ds.Tables[0].Rows[0]["HDeleteMan"] == null \|\| ds.Tables[0].Rows[0]["HDeleteMan"].ToString() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未作废!不需要再反作废!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//反作废单据
			if (!BillOld.AbandonCancelltion(Int64.Parse(HInterID), ref ClsPub.sExeReturnInfo))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "反作废失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			}

			oCN.Commit();//提交事务

			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "执行成功！";
			objJsonResult.data = null;
			return objJsonResult; ;

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "执行失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			@@ -3392,6 +3365,17 @@
			oBill.DetailColl.Add(oItemSub);

			}

			//进行会计期间结账的判断和控制
			int sYear = 0;
			int sPeriod = 0;
			DateTime HDate = DateTime.Now;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.Message = s;
			return objJsonResult;
			}

			//保存
			//保存完毕后处理
			bool bResult;
			@@ -3535,6 +3519,16 @@
			return objJsonResult;
			}

			//进行会计期间结账的判断和控制
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			DateTime HDate = DateTime.Now;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.Message = s;
			return objJsonResult;
			}

			ClsPub.CurUserName = user;
			BillOld.MvarItemKey = "Kf_ICStockBillMain";
			@@ -3587,7 +3581,6 @@
			}
			//==================================================================================


			//审核单据
			if (!oBill.CheckBill(oBill.omodel.HInterID, oBill.omodel.HBillNo, "h_p_Kf_ICStockBill_AfterCheckCtrl", user, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			@@ -3638,7 +3631,6 @@
			return objJsonResult;
			}
			//===========================================================


			//反审核单据
			if (oBill.AbandonCheck(oBill.omodel.HInterID, oBill.omodel.HBillNo, "h_p_Kf_ICStockBill_AfterUnCheckCtrl", user, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			@@ -3931,6 +3923,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_OtherInBillQuery", 1, false, user))
			{
			@@ -3950,13 +3943,19 @@
			string sql = "select * from h_v_Kf_OtherInBillList where 1 = 1 " + sWhere+ " order by hmainid desc";
			ds = oCN.RunProcReturn(sql, "h_v_Kf_OtherInBillList");
			}

			foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
			{
			Type dataType = col.DataType; //获取当前数据类型传入自定义变量datadataType
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接 // 将列名和数据类型信息拼接成一个JSON格式的字符串
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}
			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.data = ds.Tables[0];//代码将第一个DataTable（索引为0）赋值给objJsonResult的data属性
			objJsonResult.list = columnNameList;//将columnNameList赋值给objJsonResult的list属性
			return objJsonResult;
			//}
			//else
			@@ -4051,7 +4050,15 @@
			}
			//==================================================================================


			//进行会计期间结账的判断和控制
			int sYear = 0;
			int sPeriod = 0;
			DateTime HDate = DateTime.Now;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.Message = s;
			return objJsonResult;
			}

			oCN.BeginTran();

			@@ -4115,6 +4122,7 @@
			{
			try
			{
			List<object> columnNameList = new List<object>(); //定义声明变量，把通过 new List<object>()创建的实例，赋值给变量
			//判断是否有查询权限
			if (!DBUtility.ClsPub.Security_Log("Kf_EntrustInBillQuery", 1, false, user))
			{
			@@ -4133,13 +4141,20 @@
			string sql = "select * from h_v_Kf_EntrustInBillList where 1 = 1 " + sWhere+ " order by hmainid desc";
			ds = oCN.RunProcReturn(sql, "h_v_Kf_EntrustInBillList");
			}
			foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
			{
			Type dataType = col.DataType; //获取当前数据类型传入自定义变量datadataType
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接 // 将列名和数据类型信息拼接成一个JSON格式的字符串
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.data = ds.Tables[0];//代码将第一个DataTable（索引为0）赋值给objJsonResult的data属性
			objJsonResult.list = columnNameList;//将columnNameList赋值给objJsonResult的list属性
			return objJsonResult;
			//}
			//else
			@@ -4191,6 +4206,7 @@

			#endregion

			#region 模具维修记录单

			#region 模具维修记录单保存/编辑
			/// <summary>
			@@ -4231,8 +4247,8 @@
			lsmain = oListModels.getObjectByJson_Gy_MouldRepairWorkBillMain(msg2);
			foreach (Model.ClsSb_MouldRepairWorkBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			UserName = oItem.HMaker; //制单人
			oItem.HMaker = msg4;
			UserName = msg4; //制单人
			oItem.HBillType = "3807";
			oItem.HBillSubType = "3807";
			//oItem.HBillNo = ""; //单据号
			@@ -4650,6 +4666,309 @@
			}
			#endregion

			#region 模具维修记录单保存/编辑
			/// <summary>
			/// 保存模具维修单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			[Route("Sb_MouldRepairWorkBill/SaveGetMouldRepairWorkBill_PDA")]
			[HttpPost]
			public object SaveGetMouldRepairWorkBill_PDA([FromBody] JObject msg)
			{
			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();


			string UserName = "";
			ListModels oListModels = new ListModels();
			try
			{
			if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Edit", 1, false, msg4))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			DAL.ClsSb_MouldRepairWorkBill oBill = new DAL.ClsSb_MouldRepairWorkBill();
			List<Model.ClsSb_MouldRepairWorkBillMain> lsmain = new List<Model.ClsSb_MouldRepairWorkBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldRepairWorkBillMain(msg2);
			foreach (Model.ClsSb_MouldRepairWorkBillMain oItem in lsmain)
			{
			oItem.HMaker = msg4;
			UserName = msg4; //制单人
			oItem.HBillType = "3807";
			oItem.HBillSubType = "3807";
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			oBill.omodel = oItem;
			}
			//表体数据
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Model.ClsSb_MouldRepairWorkBillSub> ls = new List<Model.ClsSb_MouldRepairWorkBillSub>();
			ls = oListModels.getObjectByJson_Gy_MouldRepairWorkBillSub(msg3);
			int i = 0;
			foreach (Model.ClsSb_MouldRepairWorkBillSub oItem in ls)
			{

			i++;
			oItem.HEntryID = i;
			oItem.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItem.HCloseType = false; //关闭类型
			oItem.HRelationQty = 0; //关联数量
			oBill.DetailColl.Add(oItem);

			}


			//保存
			//保存完毕后处理
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			}
			if (bResult)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			#endregion

			#region 模具维修记录表列表
			[Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBillList")]
			[HttpGet]
			public object GetMouldRepairWorkBillList(string sWhere, string user)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ds = Sc_MouldRepairWorkBillList_s(sWhere);

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			//if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			//{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			//}
			//else
			//{
			//objJsonResult.code = "0";
			//objJsonResult.count = 0;
			//objJsonResult.Message = "无数据";
			//objJsonResult.data = null;
			//return objJsonResult;
			//}
			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			public static DataSet Sc_MouldRepairWorkBillList_s(string sWhere)
			{
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList where 1=1 " + sWhere + " order by hmainid desc", "h_v_Sc_MouldRepairWorkBillList");
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList where 1 = 1 ";
			string sql = sql1 + sWhere + "order by hmainid desc";
			return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList");
			}
			}
			#endregion

			#region 模具维修记录表分页列表
			[Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBillListPage")]
			[HttpGet]
			public object GetMouldRepairWorkBillListPage(string sWhere, string user, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldRepairWorkBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldRepairWorkBillList");
			}
			else
			{
			sWhere = sWhere.Replace("'", "''");
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldRepairWorkBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldRepairWorkBillList");
			}


			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}


			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			#endregion

			#region 模具维修记录表列表
			[Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBill_PDA")]
			[HttpGet]
			public object GetMouldRepairWorkBill_PDA(string sWhere, string user)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ds = Sc_MouldRepairWorkBillList_PDA(sWhere);

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;

			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			public static DataSet Sc_MouldRepairWorkBillList_PDA(string sWhere)
			{
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList_PDA where 1=1 " + sWhere + " order by hmainid desc", "h_v_Sc_MouldRepairWorkBillList_PDA");
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList_PDA where 1 = 1 ";
			string sql = sql1 + sWhere + "order by hmainid desc";
			return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList_PDA");
			}
			}
			#endregion

			#endregion

			#region 器具维修记录统计分析
			/// <summary>
			/// 器具维修记录统计分析列表
			@@ -4702,7 +5021,7 @@
			}
			#endregion


			#region 模具验收单

			#region 模具维修验收单保存/编辑
			/// <summary>
			@@ -4879,7 +5198,7 @@
			{

			//ds = oCN.RunProcReturn("select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark from Sc_MouldRepairCheckBillSub", "Sc_MouldRepairCheckBillSub");
			ds = oCN.RunProcReturn("select HRepairCheckID,验收项目代码 HRepairCheckCode,验收项目 HRepairCheckName,验收内容 HRepairCheckContent,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,备注 HRemark from h_v_Sc_MouldRepairCheckBillList_Edit", "h_v_Sc_MouldRepairCheckBillList_Edit");
			ds = oCN.RunProcReturn("select * from h_v_Sc_MouldRepairCheckBillList_Edit", "h_v_Sc_MouldRepairCheckBillList_Edit");

			objJsonResult.code = "0";
			objJsonResult.count = 1;
			@@ -4890,7 +5209,7 @@
			{

			//string sql1 = "select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark from Sc_MouldRepairCheckBillSub where 1 = 1 ";
			string sql1 = "select HRepairCheckID,验收项目代码 HRepairCheckCode,验收项目 HRepairCheckName,验收内容 HRepairCheckContent,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,备注 HRemark from h_v_Sc_MouldRepairCheckBillList_Edit where 1 = 1 ";
			string sql1 = "select * from h_v_Sc_MouldRepairCheckBillList_Edit where 1 = 1 ";
			string sql = sql1 + sqlWhere;
			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldRepairCheckBillList_Edit");

			@@ -4991,6 +5310,7 @@
			}
			#endregion

			#endregion

			#region 模具故障登记表

			@@ -5031,7 +5351,7 @@
			foreach (Model.ClsSc_MouldConkBookBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			UserName = oItem.HMaker; //制单人
			UserName = msg4; //制单人
			DBUtility.ClsPub.CurUserName = UserName;
			oItem.HBillType = "3815";
			oItem.HBillSubType = "3815";
			@@ -5040,19 +5360,6 @@
			//oItem.HInnerBillNo = ""; // --内部单据号
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			//oItem.HPeriod = 0;
			//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			//oItem.HCheckResult = ""; //验收结论--(正常，异常)
			//oItem.HEmpID = 0; //验收人(Gy_Employee)
			//oItem.HManagerID = 0; //负责人(Gy_Employee)
			//oItem.HDeptID = 0; //验收部门(Gy_Department)
			//oItem.HExplanation = ""; //摘要(故障描述)
			//oItem.HRemark = ""; //备注

			//oItem.HMainSourceInterID = oItem.HInterID;

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			@@ -5078,22 +5385,11 @@
			i++;
			oItemSub.HEntryID = i;

			//oItemSub.HRepairCheckID = 0; //验收项目ID
			//oItemSub.HRepairCheckContent = ""; //验收内容
			//oItemSub.HManagerID = 0; //负责人ID
			//oItemSub.HCloseMan = ""; //行关闭

			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注

			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			//oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//oItemSub.HRepairID = 0; //维修项目
			//oItemSub.HRepairExplanation =""; //维修要求

			//oItemSub.HMoney = 0; //维修费用
			oBill.DetailColl.Add(oItemSub);

			}
			@@ -5102,7 +5398,6 @@
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			}
			else
			@@ -5114,7 +5409,6 @@
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			return objJsonResult;
			}
			@@ -5279,6 +5573,68 @@
			}
			}
			#endregion

			#region 模具故障登记单_PDA
			[Route("Sc_MouldConkBookBill/GetMouldConkBookBillList_PDA")]
			[HttpGet]
			public object GetMouldConkBookBillList_PDA(string sWhere, string user)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldConkBookBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ds = Sc_MouldConkBookBillList_PDA(sWhere);

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception ex)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			public static DataSet Sc_MouldConkBookBillList_PDA(string sWhere)
			{
			DataSet ds;
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldConkBookBillList_PDA where 1=1 " + sWhere + " order by hmainid desc", "h_v_Sc_MouldConkBookBillList_PDA");
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldConkBookBillList_PDA where 1 = 1 ";
			string sql = sql1 + sWhere + "order by 日期 desc";
			ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldConkBookBillList_PDA");
			}
			return ds;
			}
			#endregion

			#endregion


			@@ -5301,7 +5657,7 @@
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();
			string msg5 = sArray[3].ToString();

			string msg6 = sArray[4].ToString();

			string UserName = "";
			ListModels oListModels = new ListModels();
			@@ -5318,6 +5674,7 @@

			DAL.ClsSc_MouldMaintainPlanBill oBill = new DAL.ClsSc_MouldMaintainPlanBill();
			List<Model.ClsSc_MouldMaintainPlanBillMain> lsmain = new List<Model.ClsSc_MouldMaintainPlanBillMain>();

			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldMaintainPlanBillMain(msg2);
			@@ -5327,11 +5684,14 @@
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3818";
			oItem.HBillSubType = "3818";
			oItem.HMainSourceInterID = oItem.HMouldMaintainRuleID;
			oItem.HMainSourceBillNo = oItem.HMouldMaintainRuleNo;

			//oItem.HInterID =0;
			//oItem.HBillNo = "";
			oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HPeriod = DBUtility.ClsPub.isLong(DateTime.Now.Month);
			//oItem.HMakeDate = "";
			//oItem.HYear = "";
			//oItem.HPeriod = "";
			@@ -5418,6 +5778,32 @@
			oBill.DetailColl.Add(oItemSub);

			}

			//表体数据
			//按 },{来拆分数组 //去掉【和】
			//如果是编辑就允许保存,否则不允许
			if (oBill.omodel.HInterID != 0)
			{
			msg6 = msg6.Substring(1, msg6.Length - 2);
			msg6 = msg6.Replace("\\", "");
			msg6 = msg6.Replace("\n", "");
			List<Model.ClsSc_MouldMaintainPlanBillSub_Plan> lss = new List<Model.ClsSc_MouldMaintainPlanBillSub_Plan>();
			lss = oListModels.getObjectByJson_Sc_MouldMaintainPlanBillSub_Plan(msg6);
			int l = 0;
			foreach (Model.ClsSc_MouldMaintainPlanBillSub_Plan oItem in lss)
			{

			l++;
			oItem.HEntryID = l;
			oItem.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItem.HCloseType = false; //关闭类型
			oItem.HSourceInterID = 0; // 源单主内码
			oItem.HSourceEntryID = 0; //源单子内码
			oItem.HRelationQty = 0; //关联数量
			oBill.DetailCol2.Add(oItem);
			}
			}

			//保存
			//保存完毕后处理
			bool bResult;
			@@ -5484,7 +5870,7 @@
			{
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			//获取保养项目编辑数据
			string sql = "select 保养项目ID HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,负责人ID,负责人代码 HManagerNumber,负责人名称 HManagerName,子备注2 HRemark,HMouldMaintainRuleID,HEquipDotCheckNo from h_v_Sc_MouldMaintainPlanBillSub_Item where 1 = 1 " + sqlWhere + "";
			string sql = "select 保养项目ID HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,负责人ID HManagerID,负责人代码 HManagerNumber,负责人名称 HManagerName,子备注2 HRemark,HMouldMaintainRuleID,HEquipDotCheckNo from h_v_Sc_MouldMaintainPlanBillSub_Item where 1 = 1 " + sqlWhere + "";

			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldMaintainPlanBillSub_Item");
			//获取配件项目编辑数据
			@@ -5510,6 +5896,55 @@
			return objJsonResult;
			}
			#endregion

			#region[器具保养记录表，选保养计划获取保养计划清单信息]
			[Route("Sc_MouldMaintainPlanBill/Sc_MouldMaintainPlanBill_PlanList")]
			[HttpGet]
			public object Sc_MouldMaintainPlanBill_PlanList(string HInterID, string HDate)
			{
			DataSet ds, ds1;
			try
			{
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();

			List<DataTable> tableList = new List<DataTable>();

			//获取保养项目
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldMaintain_GetPlanList " + HInterID + ",'" + HDate + "'", "h_p_Sc_MouldMaintain_GetPlanList");

			//获取配件项目编辑数据
			string sql1 = "select 配件ID HMaterID, 配件代码 HMaterNumber,配件名称 HMaterName,单位ID HUnitID,计量单位代码 HUnitNumber,计量单位名称 HUnitName,用量 HQty,标准用量 HQtyMust,子备注1 HRemark,规格型号 HMaterSpec from h_v_Sc_MouldMaintainPlanBillSub where hmainid = " + HInterID + "";
			ds1 = oCN.RunProcReturn(sql1, "h_v_Sc_MouldMaintainPlanBillSub");

			tableList.Add(ds.Tables[0]);
			tableList.Add(ds1.Tables[0]);

			if (ds.Tables[0].Rows.Count != 0 \|\| ds != null)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "获取信息成功！";
			objJsonResult.data = tableList;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "没有查询到数据信息！";
			objJsonResult.data = tableList;
			}
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "发生异常，没有返回任何计划！" + e.ToString();
			objJsonResult.data = null;
			}
			return objJsonResult;
			}
			#endregion

			#region [模具保养计划单删除功能]
			/// <summary>
			/// 模具维修单删除功能
			@@ -5684,7 +6119,7 @@
			foreach (Model.ClsSc_MouldMaintainBillMain oItem in lsmain)
			{
			UserName = oItem.HMaker; //制单人
			DBUtility.ClsPub.CurUserName = UserName;
			DBUtility.ClsPub.CurUserName = msg5;
			oItem.HBillType = "3819";
			oItem.HBillSubType = "3819";

			@@ -5814,6 +6249,142 @@
			}
			#endregion

			#region 模具保养记录表保存/编辑PDA
			/// <summary>
			/// 保存模具维修单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			[Route("Sc_MouldMaintainBill/SaveGetMouldMaintainBillListPDA")]
			[HttpPost]
			public object SaveGetMouldMaintainBillListPDA([FromBody] JObject msg)
			{
			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg5 = sArray[2].ToString();

			string UserName = "";
			ListModels oListModels = new ListModels();
			try
			{
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldMaintainBill_Edit", 1, false, msg5))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			DAL.ClsSc_MouldMaintainBill oBill = new DAL.ClsSc_MouldMaintainBill();
			List<Model.ClsSc_MouldMaintainBillMain> lsmain = new List<Model.ClsSc_MouldMaintainBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Sc_MouldMaintainBillMain(msg2);
			foreach (Model.ClsSc_MouldMaintainBillMain oItem in lsmain)
			{
			UserName = oItem.HMaker; //制单人
			DBUtility.ClsPub.CurUserName = UserName;
			oItem.HBillType = "3819";
			oItem.HBillSubType = "3819";

			//oItem.HInterID =0;
			//oItem.HBillNo = "";
			oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			//oItem.HMakeDate = "";
			//oItem.HYear = "";
			//oItem.HPeriod = "";
			//oItem.HRemark = "";
			//oItem.HCycleUnit = "";
			//oItem.HCheckCycle = "";
			//oItem.HBeginDate = "";
			//oItem.HEndDate = "";
			//oItem.HInnerBillNo = "";
			//oItem.HExplanation = "";

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			oBill.omodel = oItem;
			}
			//保养项表体数据
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Model.ClsSc_MouldMaintainRuleBillSub_Item> ls = new List<Model.ClsSc_MouldMaintainRuleBillSub_Item>();
			ls = oListModels.getObjectByJson_Sc_MouldMaintainRuleBillSub_Item(msg3);
			int i = 0;
			foreach (Model.ClsSc_MouldMaintainRuleBillSub_Item oItemSub in ls)
			{

			i++;
			oItemSub.HEntryID = i;
			//oItemSub.HCloseMan = ""; //行关闭
			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			oItemSub.HRelationQty = 0; //关联数量
			oBill.DetailCol.Add(oItemSub);

			}

			//保存
			//保存完毕后处理
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			}
			if (bResult)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			#endregion

			#region[模具保养记录表编辑时获取表头数据]
			[Route("Sc_MouldMaintainBill/Sc_MouldMaintainBillListCheckDetai")]
			[HttpGet]
			@@ -5889,7 +6460,7 @@
			}
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			//获取保养项目编辑数据
			string sql = "select HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目名称 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,HManagerID,负责人代码 HManagerNumber,负责人 HManagerName,表体备注 HRemark from h_v_Sc_MouldMaintainBillListItem where 1 = 1 " + Swhere + "";
			string sql = "select HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目名称 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,HManagerID,负责人代码 HManagerNumber,负责人 HManagerName,表体备注 HRemark,保养结果 HMaintainResult from h_v_Sc_MouldMaintainBillListItem where 1 = 1 " + Swhere + "";
			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldMaintainBillListItem");
			//获取配件项目编辑数据
			string sql1 = "select HMaterID, 配件代码 HMaterNumber,配件名称 HMaterName,规格型号 HMaterSpec,HUnitID,单位代码 HUnitNumber,单位名称 HUnitName,实际用量 HQty,标准用量 HQtyMust,HManagerID,负责人代码 HManagerNumber,负责人 HManagerName,表体备注 HRemark from h_v_Sc_MouldMaintainBillList where 1 = 1 " + Swhere + "";
			@@ -5960,9 +6531,54 @@
			return objJsonResult;
			}

			bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			if (IsDete)
			//=========================================Begin 删除前控制 Begin=========================================
			string sql1 = "exec h_p_Sc_MouldMaintainBill_BeforeDelCtrl " + HInterID + "," + user;
			ds = oCN.RunProcReturn(sql1, "h_p_Sc_MouldMaintainBill_BeforeDelCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:删除前判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//===========================================End 删除前控制 End===========================================

			bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);

			//=========================================Begin 删除后控制 Begin=========================================
			string sql2 = "exec h_p_Sc_MouldMaintainBill_AfterDelCtrl " + HInterID + "," + user;
			ds = oCN.RunProcReturn(sql2, "h_p_Sc_MouldMaintainBill_AfterDelCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:删除后判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "删除失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//===========================================End 删除后控制 End===========================================

			if (IsDete)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
			@@ -5984,6 +6600,160 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未找到";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region 模具保养记录单审核/反审核功能
			[Route("Sc_MouldMaintainBill/CheckSc_MouldMaintainBill")]
			[HttpGet]
			public object CheckSc_MouldMaintainBill(string HInterID, int Type, string user, string HBillSubType)
			{
			DAL.ClsSc_MouldMaintainBill BillOld = new DAL.ClsSc_MouldMaintainBill();
			try
			{
			//判断是否有审核权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldMaintainBill_Check", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有审核权限!";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (string.IsNullOrWhiteSpace(HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID为空！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ClsPub.CurUserName = user;
			BillOld.MvarItemKey = "Sc_MouldMaintainBillMain";
			oCN.BeginTran();//开始事务

			//Type 1 审核 2 反审核
			if (Type == 1)
			{
			//判断单据是否已经审核
			DataSet ds;
			string sql = "select * from " + BillOld.MvarItemKey + " where HinterID = " + HInterID;
			ds = oCN.RunProcReturn(sql, BillOld.MvarItemKey);
			if (ds.Tables[0] != null && ds.Tables[0].Rows.Count > 0)
			{
			if (ds.Tables[0].Rows[0]["HChecker"] != null && ds.Tables[0].Rows[0]["HChecker"].ToString() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已审核!不需要再审核!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			//审核前控制
			string HBillNo = ds.Tables[0].Rows[0]["HBillNo"].ToString();
			sql = "exec h_p_Sc_MouldMaintainBill_BeforeCheckCtrl " + int.Parse(HInterID) + ",'" + HBillNo + "','" + user + "'";
			ds = oCN.RunProcReturn(sql, "h_p_Sc_MouldMaintainBill_BeforeCheckCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:审核前判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;

			}
			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}


			//审核单据
			if (!BillOld.CheckBill(Int64.Parse(HInterID), HBillNo, "h_p_Sc_MouldMaintainBill_AfterCheckCtrl", user, ref ClsPub.sExeReturnInfo))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			else
			{
			//判断单据是否已经反审核
			DataSet ds;
			string sql = "select * from " + BillOld.MvarItemKey + " where HinterID = " + HInterID;
			ds = oCN.RunProcReturn(sql, BillOld.MvarItemKey);
			if (ds.Tables[0] != null && ds.Tables[0].Rows.Count > 0)
			{
			if (ds.Tables[0].Rows[0]["HChecker"] == null \|\| ds.Tables[0].Rows[0]["HChecker"].ToString() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已反审核!不需要再反审核!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			//反审核前控制
			string HBillNo = ds.Tables[0].Rows[0]["HBillNo"].ToString();
			sql = "exec h_p_Sc_MouldMaintainBill_BeforeUnCheckCtrl " + int.Parse(HInterID) + ",'" + HBillNo + "','" + user + "'";
			ds = oCN.RunProcReturn(sql, "h_p_Sc_MouldMaintainBill_BeforeUnCheckCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "反审核失败!原因:反审核前判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;

			}
			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "反审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}

			//反审核单据
			if (!BillOld.AbandonCheck(Int64.Parse(HInterID), HBillNo, "h_p_Sc_MouldMaintainBill_AfterUnCheckCtrl", user, ref ClsPub.sExeReturnInfo))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			oCN.Commit();//提交事务

			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "执行成功！";
			objJsonResult.data = null;
			return objJsonResult; ;

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "执行失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			@@ -6191,7 +6961,7 @@
			{
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			//获取点检项目编辑数据
			ds = oCN.RunProcReturn("select HDotCheckItem, HDotCheckPart , HClaim, a.HRemark,a.HManagerID,e.HNumber HManagerCode,e.HName HManagerName from Sc_MouldDotCheckBillSub a left join Gy_Employee e on a.HManagerID=e.HItemID where 1=1 " + sqlWhere, "Sc_MouldDotCheckBillSub");
			ds = oCN.RunProcReturn("select * from h_v_Sc_MouldDotCheckBill_Edit where 1=1 " + sqlWhere, "h_v_Sc_MouldDotCheckBill_Edit");
			//获取配件项目编辑数据
			ds1 = oCN.RunProcReturn(@"select b.HMaterID, mt.Hnumber HMaterNumber ,mt.HName HMaterName, b.HUnitID
			,u2.hnumber HUnitNumber,u2.HName HUnitName,b.HQty,b.HQtyMust,b.HRemark
			@@ -6204,7 +6974,7 @@
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "获取信息成功！";
			objJsonResult.data = null;
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = list;

			}
			@@ -6345,8 +7115,6 @@
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();
			//string msg5 = sArray[3].ToString();


			string UserName = "";
			ListModels oListModels = new ListModels();
			@@ -6367,28 +7135,14 @@
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Sc_MouldDotCheckPlanBillMain(msg2);
			foreach (Model.ClsSc_MouldDotCheckPlanBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			{
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3820";
			oItem.HBillSubType = "3820";

			//oItem.HInterID =0;
			//oItem.HBillNo = "";

			oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			//oItem.HMakeDate = "";
			//oItem.HYear = "";
			//oItem.HPeriod = "";
			//oItem.HRemark = "";
			//oItem.HCycleUnit = "";
			//oItem.HCheckCycle = "";
			//oItem.HBeginDate = "";
			//oItem.HEndDate = "";
			//oItem.HInnerBillNo = "";
			//oItem.HExplanation = "";

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);

			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			@@ -6413,7 +7167,7 @@

			i++;
			oItemSub.HEntryID = i;
			//oItemSub.HCloseMan = ""; //行关闭

			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			@@ -6421,43 +7175,10 @@
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//HMaterID = "";//配件代码
			//HUnitID = "";//单位代码
			//HQty = "";//实际用量
			//HQtyMust = "";//单位用量
			//HRemark = "";//备注
			oItemSub.HRelationQty = 0; //关联数量

			oBill.DetailColl.Add(oItemSub);

			}

			////配件项表体数据
			////按 },{来拆分数组 //去掉【和】
			//msg5 = msg5.Substring(1, msg5.Length - 2);
			//msg5 = msg5.Replace("\\", "");
			//msg5 = msg5.Replace("\n", ""); //\n
			// //msg2 = msg2.Replace("'", "’");
			//List<Model.ClsSc_MouldDotCheckPlanBillSub_Item> ls1 = new List<Model.ClsSc_MouldDotCheckPlanBillSub_Item>();
			//ls1 = oListModels.getObjectByJson_Sc_MouldDotCheckPlanBillSub_Item(msg5);
			//int j = 0;
			//foreach (Model.ClsSc_MouldDotCheckPlanBillSub_Item oItemSub in ls1)
			//{

			// j++;
			// oItemSub.HEntryID = j;
			// //oItemSub.HCloseMan = ""; //行关闭
			// oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			// oItemSub.HCloseType = false; //关闭类型

			// oItemSub.HSourceInterID = 0; // 源单主内码
			// oItemSub.HSourceEntryID = 0; //源单子内码

			// oItemSub.HRelationQty = 0; //关联数量
			// oBill.DetailCol.Add(oItemSub);
			//}

			}
			//保存
			//保存完毕后处理
			bool bResult;
			@@ -6526,8 +7247,7 @@
			{
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			//获取点检项目编辑数据
			ds = oCN.RunProcReturn(@"select a.HDotCheckItemID,HDotCheckItem, HDotCheckPart , HClaim, a.HRemark,a.HManagerID,e.HNumber HManagerCode,e.HName HManagerName from Sc_MouldDotCheckPlanBillSub a
			left join Gy_Employee e on a.HManagerID=e.HItemID
			ds = oCN.RunProcReturn(@"select * from h_v_Sc_MouldDotCheckPlanBill_Edit
			where 1=1 " + sqlWhere, "Sc_MouldDotCheckPlanBillSub");
			////获取配件项目编辑数据
			//ds1 = oCN.RunProcReturn(@"select b.HMaterID, mt.Hnumber HMaterNumber ,mt.HName HMaterName, b.HUnitID
			@@ -6540,7 +7260,7 @@
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "获取信息成功！";
			objJsonResult.data = null;
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = list;
			}
			catch (Exception e)
			@@ -6635,10 +7355,169 @@
			}
			#endregion

			#region 器具点检计划单审核/反审核功能
			[Route("Sc_MouldDotCheckPlanBill/CheckSc_MouldDotCheckPlanBill")]
			[HttpGet]
			public object CheckSc_MouldDotCheckPlanBill(string HInterID, int Type, string user)
			{
			DAL.ClsSc_MouldDotCheckPlanBill BillOld = new DAL.ClsSc_MouldDotCheckPlanBill();
			try
			{
			//判断是否有审核权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldDotCheckPlanBill_Check", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无权限审核!";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (string.IsNullOrWhiteSpace(HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID为空！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ClsPub.CurUserName = user;
			oCN.BeginTran();//开始事务

			//Type 1 审核 2 反审核
			if (Type == 1)
			{
			if (!BillOld.CheckBill(int.Parse(HInterID), ref ClsPub.sExeReturnInfo))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//自动生成点检计划单
			oCN.RunProc("exec h_p_Sc_MouldDotCheckPlan_Auto " + HInterID);
			}
			else
			{
			if (BillOld.AbandonCheck(int.Parse(HInterID), ref ClsPub.sExeReturnInfo))
			{
			SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			oCN.Commit();//提交事务

			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "执行成功！";
			objJsonResult.data = null;
			return objJsonResult; ;

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "执行失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region[器具点检计划表编辑时获取表体数据--保养计划]
			[Route("Sc_MouldDotCheckPlanBill/GetPlanList")]
			[HttpGet]
			public object GetPlanList_Check(string sqlWhere)
			{
			DataSet ds;
			try
			{
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			if (sqlWhere == null \|\| sqlWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("select * from h_v_Sc_MouldDotCheckPlanList", "h_v_Sc_MouldDotCheckPlanList");
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "获取信息成功！";
			objJsonResult.data = ds.Tables[0];
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldDotCheckPlanList where 1 = 1 ";
			string sql = sql1 + sqlWhere;
			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldDotCheckPlanList");
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "获取信息成功！";
			objJsonResult.data = ds.Tables[0];
			}
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何计划！" + e.ToString();
			objJsonResult.data = null;
			}
			return objJsonResult;
			}
			#endregion

			#endregion


			#region 根据器具条码查找器具档案信息PDA
			[Route("QJ_PDA_MouldDotCheckBill/txtHBarCode_KeyDown")]
			[HttpGet]
			public object txtHBarCode_KeyDown(string HBarCode)
			{
			try
			{
			if (HBarCode == null \|\| HBarCode.Equals(""))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "条形码不能为空！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//得到信息
			ds = oCN.RunProcReturn("select top 1 * from Gy_MouldFileMain where HBarCode= '" + HBarCode + "'", "Gy_MouldFileMain");
			//写入信息
			if (ds == null \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "未查询到器具信息！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region 模具报废入库单

			@@ -6715,7 +7594,208 @@
			}
			#endregion

			#region 模具报废入库单保存/编辑
			#region 模具报废入库单保存/编辑 20240702作废
			/// <summary>
			/// 保存模具报废入库单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			//[Route("Sc_MouldScrapInHouseBill/SaveGetMouldScrapInHouseBillList")]
			//[HttpPost]
			//public object SaveGetMouldScrapInHouseBillList([FromBody] JObject msg)
			//{
			// var _value = msg["msg"].ToString();
			// string msg1 = _value.ToString();
			// string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			// string msg2 = sArray[0].ToString();
			// string msg3 = sArray[1].ToString();
			// string refSav = sArray[2].ToString();
			// string msg4 = sArray[3].ToString();

			// string UserName = "";
			// string s = "";
			// ListModels oListModels = new ListModels();
			// try
			// {
			// //编辑权限
			// if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapRequestBill_Edit", 1, false, msg4))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "无保存权限！";
			// objJsonResult.data = null;
			// return objJsonResult;
			// }

			// DLL.ClsSc_MouldScrapInBill oBill = new DLL.ClsSc_MouldScrapInBill();
			// List<Models.ClsSc_MouldStockBillMain> lsmain = new List<Models.ClsSc_MouldStockBillMain>();
			// msg2 = msg2.Replace("\\", "");
			// msg2 = msg2.Replace("\n", ""); //\n
			// lsmain = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillMain(msg2);
			// foreach (Models.ClsSc_MouldStockBillMain oItem in lsmain)
			// {
			// if (refSav == "Add")
			// {
			// //单据号是否重复
			// if (BillNew0.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, BillOld0.omodel.HInterID))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "单据号重复！不允许保存！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// if (refSav == "Update")
			// {
			// if (BillOld0.ShowBill(oItem.HInterID, ref s) == false)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "此单据有误！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// //判断是否可编辑
			// if (BillOld0.omodel.HChecker != "" && BillOld0.omodel.HChecker != null)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "此单据已经被审核，不允许修改！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// if (BillOld0.omodel.HBillStatus > 1)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "此单据处于不可编辑状态，不允许修改！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// if (!DBUtility.Xt_BaseBillFun.Fun_AllowEditBill(BillOld0, ref s))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = s + "，不允许修改";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// //oItem.HMaker = "";
			// UserName = oItem.HMaker; //制单人
			// oItem.HBillType = "3831";
			// oItem.HBillSubType = "3831";
			// //oItem.HBillNo = ""; //单据号
			// //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			// //oItem.HInnerBillNo = ""; // --内部单据号
			// oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			// oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			// //oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			// //oItem.HPeriod = 0;
			// //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			// //oItem.HCheckResult = ""; //验收结论--(正常，异常)
			// //oItem.HEmpID = 0; //验收人(Gy_Employee)
			// //oItem.HManagerID = 0; //负责人(Gy_Employee)
			// //oItem.HDeptID = 0; //验收部门(Gy_Department)
			// //oItem.HExplanation = ""; //摘要(故障描述)
			// //oItem.HRemark = ""; //备注

			// //oItem.HMainSourceInterID = oItem.HInterID;

			// //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			// if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// oBill.omodel = oItem;
			// }
			// //表体数据
			// //按 },{来拆分数组 //去掉【和】
			// msg3 = msg3.Substring(1, msg3.Length - 2);
			// msg3 = msg3.Replace("\\", "");
			// msg3 = msg3.Replace("\n", ""); //\n
			// //msg2 = msg2.Replace("'", "’");
			// List<Models.ClsSc_MouldStockBillSub> ls = new List<Models.ClsSc_MouldStockBillSub>();
			// ls = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillSub(msg3);
			// int i = 0;
			// foreach (Models.ClsSc_MouldStockBillSub oItemSub in ls)
			// {

			// i++;
			// oItemSub.HEntryID = i;

			// //oItemSub.HRepairCheckID = 0; //验收项目ID
			// //oItemSub.HRepairCheckContent = ""; //验收内容
			// //oItemSub.HManagerID = 0; //负责人ID
			// //oItemSub.HCloseMan = ""; //行关闭
			// oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			// oItemSub.HCloseType = false; //关闭类型
			// //oItemSub.HRemark = ""; //备注
			// oItemSub.HSourceInterID = 0; // 源单主内码
			// oItemSub.HSourceEntryID = 0; //源单子内码
			// //oItemSub.HSourceBillNo = ""; //源单单号
			// //oItemSub.HSourceBillType = ""; //源单类型
			// //oItemSub.HRelationQty = 0; //关联数量
			// //oItemSub.HRelationMoney = 0; //关联金额
			// //oItemSub.HRepairID = 0; //维修项目
			// //oItemSub.HRepairExplanation =""; //维修要求
			// //oItemSub.HMoney = 0; //维修费用
			// oBill.DetailColl.Add(oItemSub);

			// }
			// //保存
			// //保存完毕后处理
			// bool bResult;
			// if (oBill.omodel.HInterID == 0)
			// {
			// // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			// oCn.RunProc(sql);
			// }
			// else
			// {
			// bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			// //修改成功
			// //string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			// string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			// oCn.RunProc(sql);
			// }
			// if (bResult)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 1;
			// objJsonResult.Message = "保存成功！";
			// //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// else
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// catch (Exception e)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + e.ToString();
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			//}
			#endregion

			#region 模具报废入库单保存/编辑 20240702
			/// <summary>
			/// 保存模具报废入库单
			/// </summary>
			@@ -6725,175 +7805,137 @@
			[HttpPost]
			public object SaveGetMouldScrapInHouseBillList([FromBody] JObject msg)
			{
			DAL.ClsSc_MouldScrapInBill oBill = new DAL.ClsSc_MouldScrapInBill();

			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string refSav = sArray[2].ToString();
			string msg4 = sArray[3].ToString();

			string UserName = "";
			string s = "";
			ListModels oListModels = new ListModels();
			string sMainStr = sArray[0].ToString(); //主表数据
			string sSubStr = sArray[1].ToString(); //子表数据
			string OperationType = sArray[2].ToString(); //操作类型（Add新增、Update编辑）
			string HMaker = sArray[3].ToString(); //制单人
			try
			{
			//编辑权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapRequestBill_Edit", 1, false, msg4))
			//判断权限
			if (OperationType == "Add")
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew;
			//判断新增权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapRequestBill", 1, false, HMaker))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "您没有该模块新增权限,请与管理员联系！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			else
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify;
			//判断编辑权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapRequestBill_Edit", 1, false, HMaker))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "您没有该模块编辑权限,请与管理员联系！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			//表头赋值
			sMainStr = sMainStr.Replace("\\", "");
			sMainStr = sMainStr.Replace("\n", "");
			sMainStr = "[" + sMainStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillMain> lsmain = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillMain>>(sMainStr);
			foreach (Model.ClsSc_MouldStockBillMain oItem in lsmain)
			{
			//单据号是否重复
			if (oBill.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, oItem.HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据号重复！不允许保存！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//判断会计期是否合理
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(oItem.HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = s;
			objJsonResult.data = null;
			return objJsonResult;
			}

			oItem.HYear = sYear;
			oItem.HPeriod = sPeriod;
			DBUtility.ClsPub.CurUserName = oItem.HMaker;
			oBill.omodel = oItem;
			}
			//表体赋值
			//按 },{来拆分数组 //去掉【和】
			sSubStr = sSubStr.Substring(1, sSubStr.Length - 2);
			sSubStr = sSubStr.Replace("\\", "");
			sSubStr = sSubStr.Replace("\n", "");
			sSubStr = "[" + sSubStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillSub> ls = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillSub>>(sSubStr);
			int i = 0;
			foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			{
			i++;
			oItemSub.HEntryID = i;
			oBill.DetailColl.Add(oItemSub);
			}

			string sErrMsg = "";
			bool bResult;
			//获取系统参数
			if (oSystemParameter.ShowBill(ref sErrMsg) == true)
			{
			//保存
			if (OperationType == "Add") //新增保存
			{
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			}
			}
			else //编辑保存
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.Message = "获取系统参数失败！ " + sErrMsg;
			objJsonResult.data = null;
			return objJsonResult;
			}

			DLL.ClsSc_MouldScrapInBill oBill = new DLL.ClsSc_MouldScrapInBill();
			List<Models.ClsSc_MouldStockBillMain> lsmain = new List<Models.ClsSc_MouldStockBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillMain(msg2);
			foreach (Models.ClsSc_MouldStockBillMain oItem in lsmain)
			{
			if (refSav == "Add")
			{
			//单据号是否重复
			if (BillNew0.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, BillOld0.omodel.HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据号重复！不允许保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			if (refSav == "Update")
			{
			if (BillOld0.ShowBill(oItem.HInterID, ref s) == false)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "此单据有误！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			//判断是否可编辑
			if (BillOld0.omodel.HChecker != "" && BillOld0.omodel.HChecker != null)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "此单据已经被审核，不允许修改！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			if (BillOld0.omodel.HBillStatus > 1)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "此单据处于不可编辑状态，不允许修改！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			if (!DBUtility.Xt_BaseBillFun.Fun_AllowEditBill(BillOld0, ref s))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = s + "，不允许修改";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			}
			//oItem.HMaker = "";
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3831";
			oItem.HBillSubType = "3831";
			//oItem.HBillNo = ""; //单据号
			//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			//oItem.HInnerBillNo = ""; // --内部单据号
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			//oItem.HPeriod = 0;
			//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			//oItem.HCheckResult = ""; //验收结论--(正常，异常)
			//oItem.HEmpID = 0; //验收人(Gy_Employee)
			//oItem.HManagerID = 0; //负责人(Gy_Employee)
			//oItem.HDeptID = 0; //验收部门(Gy_Department)
			//oItem.HExplanation = ""; //摘要(故障描述)
			//oItem.HRemark = ""; //备注

			//oItem.HMainSourceInterID = oItem.HInterID;

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			oBill.omodel = oItem;
			}
			//表体数据
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Models.ClsSc_MouldStockBillSub> ls = new List<Models.ClsSc_MouldStockBillSub>();
			ls = oListModels.getObjectByJson_Gy_MouldScrapInHouseBillSub(msg3);
			int i = 0;
			foreach (Models.ClsSc_MouldStockBillSub oItemSub in ls)
			{

			i++;
			oItemSub.HEntryID = i;

			//oItemSub.HRepairCheckID = 0; //验收项目ID
			//oItemSub.HRepairCheckContent = ""; //验收内容
			//oItemSub.HManagerID = 0; //负责人ID
			//oItemSub.HCloseMan = ""; //行关闭
			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			//oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//oItemSub.HRepairID = 0; //维修项目
			//oItemSub.HRepairExplanation =""; //维修要求
			//oItemSub.HMoney = 0; //维修费用
			oBill.DetailColl.Add(oItemSub);

			}
			//保存
			//保存完毕后处理
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			//修改成功
			//string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			if (bResult)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo; //成功！
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			@@ -6901,7 +7943,7 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -6909,8 +7951,8 @@
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			objJsonResult.Message = "保存失败！" + e.Message;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -7108,6 +8150,62 @@

			#endregion

			#region 模具处理出库单分页列表
			[Route("Sc_MouldScrapOutHouseBill/page")]
			[HttpGet]
			public object Sc_MouldScrapOutHouseBillPage(string sWhere, string user, int page, int size)
			{
			DataSet ds;
			try
			{
			List<object> columnNameList = new List<object>();
			//权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			sWhere = sWhere.Replace("'", "''");
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldScrapOutHouseBillList " + page + "," + size + ",''", "h_p_Sc_MouldScrapOutHouseBillList");
			}
			else
			{
			ds = oCN.RunProcReturn("exec h_p_Sc_MouldScrapOutHouseBillList " + page + "," + size + ",'" + sWhere + "'", "h_p_Sc_MouldScrapOutHouseBillList");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = CodeConstant.SUCCEED;
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.list = columnNameList;
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = CodeConstant.FAIL;
			objJsonResult.count = CountConstant.FAIL;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion


			#region[模具处理出库单编辑时获取表头数据]
			[Route("Sc_MouldScrapOutHouseBill/Sc_MouldScrapOutHouseBillListCheckDetai")]
			[HttpGet]
			@@ -7179,7 +8277,158 @@
			}
			#endregion

			#region 模具处理出库单保存/编辑
			#region 模具处理出库单保存/编辑 20240702作废
			/// <summary>
			/// 保存模具处理出库单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			//[Route("Sc_MouldScrapOutHouseBill/SaveGetMouldScrapOutHouseBillList")]
			//[HttpPost]
			//public object SaveGetMouldScrapOutHouseBillList([FromBody] JObject msg)
			//{
			// var _value = msg["msg"].ToString();
			// string msg1 = _value.ToString();
			// string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			// string msg2 = sArray[0].ToString();
			// string msg3 = sArray[1].ToString();
			// string msg4 = sArray[2].ToString();

			// string UserName = "";
			// ListModels oListModels = new ListModels();
			// try
			// {
			// //编辑权限
			// if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Edit", 1, false, msg4))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "无保存权限！";
			// objJsonResult.data = null;
			// return objJsonResult;
			// }

			// DLL.ClsSc_MouldScrapOutBill oBill = new DLL.ClsSc_MouldScrapOutBill();
			// List<Model.ClsSc_MouldStockBillMain> lsmain = new List<Model.ClsSc_MouldStockBillMain>();
			// msg2 = msg2.Replace("\\", "");
			// msg2 = msg2.Replace("\n", ""); //\n
			// lsmain = oListModels.getObjectByJson_Gy_MouldScrapOutHouseBillMain(msg2);
			// foreach (Model.ClsSc_MouldStockBillMain oItem in lsmain)
			// {
			// //oItem.HMaker = "";
			// UserName = oItem.HMaker; //制单人
			// oItem.HBillType = "3832";
			// oItem.HBillSubType = "3832";
			// //oItem.HBillNo = ""; //单据号
			// //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			// //oItem.HInnerBillNo = ""; // --内部单据号
			// oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			// oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			// //oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			// //oItem.HPeriod = 0;
			// //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			// //oItem.HCheckResult = ""; //验收结论--(正常，异常)
			// //oItem.HEmpID = 0; //验收人(Gy_Employee)
			// //oItem.HManagerID = 0; //负责人(Gy_Employee)
			// //oItem.HDeptID = 0; //验收部门(Gy_Department)
			// //oItem.HExplanation = ""; //摘要(故障描述)
			// //oItem.HRemark = ""; //备注

			// //oItem.HMainSourceInterID = oItem.HInterID;

			// //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			// if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// oBill.omodel = oItem;
			// }
			// //表体数据
			// //按 },{来拆分数组 //去掉【和】
			// msg3 = msg3.Substring(1, msg3.Length - 2);
			// msg3 = msg3.Replace("\\", "");
			// msg3 = msg3.Replace("\n", ""); //\n
			// //msg2 = msg2.Replace("'", "’");
			// List<Model.ClsSc_MouldStockBillSub> ls = new List<Model.ClsSc_MouldStockBillSub>();
			// ls = oListModels.getObjectByJson_Gy_MouldScrapOutHouseBillSub(msg3);
			// int i = 0;
			// foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			// {

			// i++;
			// oItemSub.HEntryID = i;

			// //oItemSub.HRepairCheckID = 0; //验收项目ID
			// //oItemSub.HRepairCheckContent = ""; //验收内容
			// //oItemSub.HManagerID = 0; //负责人ID
			// //oItemSub.HCloseMan = ""; //行关闭
			// oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			// oItemSub.HCloseType = false; //关闭类型
			// //oItemSub.HRemark = ""; //备注
			// oItemSub.HSourceInterID = 0; // 源单主内码
			// oItemSub.HSourceEntryID = 0; //源单子内码
			// //oItemSub.HSourceBillNo = ""; //源单单号
			// //oItemSub.HSourceBillType = ""; //源单类型
			// //oItemSub.HRelationQty = 0; //关联数量
			// //oItemSub.HRelationMoney = 0; //关联金额
			// //oItemSub.HRepairID = 0; //维修项目
			// //oItemSub.HRepairExplanation =""; //维修要求
			// //oItemSub.HMoney = 0; //维修费用
			// oBill.DetailColl.Add(oItemSub);

			// }
			// //保存
			// //保存完毕后处理
			// bool bResult;
			// if (oBill.omodel.HInterID == 0)
			// {
			// // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			// oCn.RunProc(sql);
			// }
			// else
			// {
			// bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			// //修改成功
			// //string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			// string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			// oCn.RunProc(sql);
			// }
			// if (bResult)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 1;
			// objJsonResult.Message = "保存成功！";
			// //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// else
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// catch (Exception e)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + e.ToString();
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			//}
			#endregion

			#region 模具处理出库单保存/编辑 20240702
			/// <summary>
			/// 保存模具处理出库单
			/// </summary>
			@@ -7189,125 +8438,126 @@
			[HttpPost]
			public object SaveGetMouldScrapOutHouseBillList([FromBody] JObject msg)
			{
			DAL.ClsSc_MouldScrapOutBill oBill = new DAL.ClsSc_MouldScrapOutBill();

			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();

			string UserName = "";
			ListModels oListModels = new ListModels();
			string sMainStr = sArray[0].ToString(); //主表数据
			string sSubStr = sArray[1].ToString(); //子表数据
			string HMaker = sArray[2].ToString(); //制单人
			try
			{
			//编辑权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Edit", 1, false, msg4))
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldScrapOutBill_Edit", 1, false, HMaker))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无保存权限！";
			objJsonResult.Message = "您没有该模块新增/编辑权限,请与管理员联系！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//表头赋值
			sMainStr = sMainStr.Replace("\\", "");
			sMainStr = sMainStr.Replace("\n", "");
			sMainStr = "[" + sMainStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillMain> lsmain = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillMain>>(sMainStr);
			foreach (Model.ClsSc_MouldStockBillMain oItem in lsmain)
			{
			if (oItem.HInterID == 0)
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew;
			}
			else
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify;
			}
			//单据号是否重复
			if (oBill.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, oItem.HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据号重复！不允许保存！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//判断会计期是否合理
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(oItem.HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = s;
			objJsonResult.data = null;
			return objJsonResult;
			}

			oItem.HYear = sYear;
			oItem.HPeriod = sPeriod;
			DBUtility.ClsPub.CurUserName = oItem.HMaker;
			oBill.omodel = oItem;
			}
			//表体赋值
			//按 },{来拆分数组 //去掉【和】
			sSubStr = sSubStr.Substring(1, sSubStr.Length - 2);
			sSubStr = sSubStr.Replace("\\", "");
			sSubStr = sSubStr.Replace("\n", "");
			sSubStr = "[" + sSubStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillSub> ls = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillSub>>(sSubStr);
			int i = 0;
			foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			{
			i++;
			oItemSub.HEntryID = i;
			oBill.DetailColl.Add(oItemSub);
			}

			string sErrMsg = "";
			bool bResult;
			//获取系统参数
			if (oSystemParameter.ShowBill(ref sErrMsg) == true)
			{
			//保存
			if (oBill.omodel.HInterID == 0) //新增保存
			{
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			}
			}
			else //编辑保存
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "获取系统参数失败！ " + sErrMsg;
			objJsonResult.data = null;
			return objJsonResult;
			}

			DLL.ClsSc_MouldScrapOutBill oBill = new DLL.ClsSc_MouldScrapOutBill();
			List<Model.ClsSc_MouldStockBillMain> lsmain = new List<Model.ClsSc_MouldStockBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldScrapOutHouseBillMain(msg2);
			foreach (Model.ClsSc_MouldStockBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3832";
			oItem.HBillSubType = "3832";
			//oItem.HBillNo = ""; //单据号
			//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			//oItem.HInnerBillNo = ""; // --内部单据号
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			//oItem.HPeriod = 0;
			//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			//oItem.HCheckResult = ""; //验收结论--(正常，异常)
			//oItem.HEmpID = 0; //验收人(Gy_Employee)
			//oItem.HManagerID = 0; //负责人(Gy_Employee)
			//oItem.HDeptID = 0; //验收部门(Gy_Department)
			//oItem.HExplanation = ""; //摘要(故障描述)
			//oItem.HRemark = ""; //备注

			//oItem.HMainSourceInterID = oItem.HInterID;

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			oBill.omodel = oItem;
			}
			//表体数据
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Model.ClsSc_MouldStockBillSub> ls = new List<Model.ClsSc_MouldStockBillSub>();
			ls = oListModels.getObjectByJson_Gy_MouldScrapOutHouseBillSub(msg3);
			int i = 0;
			foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			{

			i++;
			oItemSub.HEntryID = i;

			//oItemSub.HRepairCheckID = 0; //验收项目ID
			//oItemSub.HRepairCheckContent = ""; //验收内容
			//oItemSub.HManagerID = 0; //负责人ID
			//oItemSub.HCloseMan = ""; //行关闭
			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			//oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//oItemSub.HRepairID = 0; //维修项目
			//oItemSub.HRepairExplanation =""; //维修要求
			//oItemSub.HMoney = 0; //维修费用
			oBill.DetailColl.Add(oItemSub);

			}
			//保存
			//保存完毕后处理
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			//修改成功
			//string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			if (bResult)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo; //成功！
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			@@ -7315,7 +8565,7 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -7323,8 +8573,8 @@
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			objJsonResult.Message = "保存失败！" + e.Message;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -7589,6 +8839,22 @@
			DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (flag == 1)
			{
			if (oBill.omodel.HBillStatus == 2)
			@@ -7612,7 +8878,7 @@
			}
			else
			{
			if (oBill.omodel.HBillStatus == 1)
			if (oBill.omodel.HBillStatus != 2)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			@@ -7643,6 +8909,152 @@
			}
			}
			#endregion

			#region 器具处理出库单关闭/反关闭
			/// <summary>
			/// </summary>
			/// <param name="HInterID">单据ID</param>
			/// <param name="IsAudit">关闭(0),反关闭(1)</param>
			/// <param name="CurUserName">关闭人</param>
			/// <returns></returns>
			[Route("Sc_MouldScrapOutHouseBill/CloseSc_MouldScrapOutHouseBill")]
			[HttpGet]
			public object CloseSc_MouldScrapOutHouseBill(int HInterID, int IsAudit, string CurUserName)
			{
			string ModRightNameCheck = "Sc_MouldScrapOutBill_Close";
			DBUtility.ClsPub.CurUserName = CurUserName;
			try
			{
			//检查权限
			if (!DBUtility.ClsPub.Security_Log_second(ModRightNameCheck, 1, false, CurUserName))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败！无权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//HInterID数据判断
			if (HInterID <= 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID小于0！";
			objJsonResult.data = null;
			return objJsonResult;
			}


			Int64 lngBillKey = 0;
			lngBillKey = DBUtility.ClsPub.isLong(HInterID); //对HInterID进行类型的转换
			DAL.ClsSc_MouldProdOutBill oBill = new DAL.ClsSc_MouldProdOutBill(); //实例化单据操作类，用于进行相关操作

			//针对需要进行的操作，检验当前单据的状态是否支持需要进行的操作
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo)) //根据HInterID获取该单据的数据
			{
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HChecker.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未审核!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (IsAudit == 0) //关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未关闭!不需要反关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}


			//进行需要进行的关闭/反关闭操作
			if (IsAudit == 0) //关闭提交
			{
			//关闭提交
			if (oBill.CloseBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭提交
			{
			//反关闭提交
			if (oBill.CancelClose(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "反关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "反关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败或者反关闭失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion


			#endregion

			@@ -7698,6 +9110,68 @@

			}

			#endregion

			#region 模具退库单列表查询-分页
			/// <summary>
			/// 返回应收单列表
			///参数：string sql。
			///返回值：object。
			/// </summary>
			[Route("Sc_MouldProdBackBill/list_byPage")]
			[HttpGet]
			public object getSc_MouldProdBackBill_byPage(string sWhere, string user, string Organization, int page, int size)
			{
			try
			{
			Log.LogInfo("成功！"); //记录提交数据

			//查看权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			Log.LogInfo("有权限");
			LogService.Write(sWhere + ";" + Organization);

			string sql = "";
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			sWhere = " and 库存组织='" + Organization + "'";
			sWhere = sWhere.Replace("'", "''");
			sql = "exec h_p_Sc_MouldProdBackBillList_Query " + page + "," + size + ",'" + Organization + "','" + sWhere + "'";
			Log.LogInfo(sql);
			ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_p_Sc_MouldProdBackBillList_Query");
			}
			else
			{
			sWhere += " and 库存组织='" + Organization + "'";
			sWhere = sWhere.Replace("'", "''");
			sql = "exec h_p_Sc_MouldProdBackBillList_Query " + page + "," + size + ",'" + Organization + "','" + sWhere + "'";
			Log.LogInfo(sql);
			ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_p_Sc_MouldProdBackBillList_Query");
			}

			objJsonResult.code = "1";
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region[模具退库单编辑时获取表头数据]
			@@ -7771,7 +9245,159 @@
			}
			#endregion

			#region 模具退库单保存/编辑
			#region 模具退库单保存/编辑 20240702作废
			/// <summary>
			/// 保存模具退库单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			//[Route("Sc_MouldProdBackBill/SaveGetMouldProdBackBillList")]
			//[HttpPost]
			//public object SaveGetMouldProdBackBillList([FromBody] JObject msg)
			//{
			// var _value = msg["msg"].ToString();
			// string msg1 = _value.ToString();
			// string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			// string msg2 = sArray[0].ToString();
			// string msg3 = sArray[1].ToString();
			// string msg4 = sArray[2].ToString();

			// string UserName = "";
			// ListModels oListModels = new ListModels();
			// try
			// {
			// if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Edit", 1, false, msg4))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "没有保存权限";
			// objJsonResult.data = null;
			// return objJsonResult;
			// }

			// DLL.ClsSc_MouldProdBackBill oBill = new DLL.ClsSc_MouldProdBackBill();
			// List<Model.ClsSc_MouldProdBackBillMain> lsmain = new List<Model.ClsSc_MouldProdBackBillMain>();
			// msg2 = msg2.Replace("\\", "");
			// msg2 = msg2.Replace("\n", ""); //\n
			// lsmain = oListModels.getObjectByJson_Gy_MouldProdBackBillMain(msg2);
			// foreach (Model.ClsSc_MouldProdBackBillMain oItem in lsmain)
			// {
			// //oItem.HMaker = "";
			// UserName = oItem.HMaker; //制单人
			// oItem.HBillType = "3803";
			// oItem.HBillSubType = "3803";
			// //oItem.HBillNo = ""; //单据号
			// //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			// //oItem.HInnerBillNo = ""; // --内部单据号
			// oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			// oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			// //oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			// //oItem.HPeriod = 0;
			// //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			// //oItem.HCheckResult = ""; //验收结论--(正常，异常)
			// //oItem.HEmpID = 0; //验收人(Gy_Employee)
			// //oItem.HManagerID = 0; //负责人(Gy_Employee)
			// //oItem.HDeptID = 0; //验收部门(Gy_Department)
			// //oItem.HExplanation = ""; //摘要(故障描述)
			// //oItem.HRemark = ""; //备注

			// //oItem.HMainSourceInterID = oItem.HInterID;

			// //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			// if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// oBill.omodel = oItem;
			// }
			// //表体数据
			// //按 },{来拆分数组 //去掉【和】
			// msg3 = msg3.Substring(1, msg3.Length - 2);
			// msg3 = msg3.Replace("\\", "");
			// msg3 = msg3.Replace("\n", ""); //\n
			// //msg2 = msg2.Replace("'", "’");
			// List<Model.ClsSc_MouldProdBackBillSub> ls = new List<Model.ClsSc_MouldProdBackBillSub>();
			// ls = oListModels.getObjectByJson_Gy_MouldProdBackBillSub(msg3);
			// int i = 0;
			// foreach (Model.ClsSc_MouldProdBackBillSub oItemSub in ls)
			// {

			// i++;
			// oItemSub.HEntryID = i;

			// //oItemSub.HRepairCheckID = 0; //验收项目ID
			// //oItemSub.HRepairCheckContent = ""; //验收内容
			// //oItemSub.HManagerID = 0; //负责人ID
			// //oItemSub.HCloseMan = ""; //行关闭
			// oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			// oItemSub.HCloseType = false; //关闭类型
			// //oItemSub.HRemark = ""; //备注
			// oItemSub.HSourceInterID = 0; // 源单主内码
			// oItemSub.HSourceEntryID = 0; //源单子内码
			// //oItemSub.HSourceBillNo = ""; //源单单号
			// //oItemSub.HSourceBillType = ""; //源单类型
			// //oItemSub.HRelationQty = 0; //关联数量
			// //oItemSub.HRelationMoney = 0; //关联金额
			// //oItemSub.HRepairID = 0; //维修项目
			// //oItemSub.HRepairExplanation =""; //维修要求
			// //oItemSub.HMoney = 0; //维修费用
			// oBill.DetailColl.Add(oItemSub);

			// }
			// //保存
			// //保存完毕后处理
			// bool bResult;
			// if (oBill.omodel.HInterID == 0)
			// {
			// // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// string sql1 = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			// oCn.RunProc(sql1);
			// }
			// else
			// {
			// bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			// //修改成功
			// //string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			// string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			// oCn.RunProc(sql);
			// }
			// if (bResult)
			// {
			// string sql =string.Format($"exec h_p_Sc_MouldProdBackBillList '{oBill.omodel.HBillNo}' ") ;
			// oCn.RunProc(sql);
			// objJsonResult.code = "0";
			// objJsonResult.count = 1;
			// objJsonResult.Message = "保存成功！";
			// //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// else
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// catch (Exception e)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + e.ToString();
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			//}
			#endregion

			#region 模具退库单保存/编辑 20240702
			/// <summary>
			/// 保存模具退库单
			/// </summary>
			@@ -7781,126 +9407,127 @@
			[HttpPost]
			public object SaveGetMouldProdBackBillList([FromBody] JObject msg)
			{
			DAL.ClsSc_MouldProdBackBill oBill = new DAL.ClsSc_MouldProdBackBill();

			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();

			string UserName = "";
			ListModels oListModels = new ListModels();
			string sMainStr = sArray[0].ToString(); //主表数据
			string sSubStr = sArray[1].ToString(); //子表数据
			string HMaker = sArray[2].ToString(); //制单人
			try
			{
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Edit", 1, false, msg4))
			//判断权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdBackBill_Edit", 1, false, HMaker))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有保存权限";
			objJsonResult.Message = "您没有该模块新增/编辑权限,请与管理员联系！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//表头赋值
			sMainStr = sMainStr.Replace("\\", "");
			sMainStr = sMainStr.Replace("\n", "");
			sMainStr = "[" + sMainStr.ToString() + "]";
			List<Model.ClsSc_MouldProdBackBillMain> lsmain = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldProdBackBillMain>>(sMainStr);
			foreach (Model.ClsSc_MouldProdBackBillMain oItem in lsmain)
			{
			if (oItem.HInterID == 0)
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew;
			}
			else
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify;
			}
			//单据号是否重复
			if (oBill.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, oItem.HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据号重复！不允许保存！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//判断会计期是否合理
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(oItem.HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = s;
			objJsonResult.data = null;
			return objJsonResult;
			}

			oItem.HYear = sYear;
			oItem.HPeriod = sPeriod;
			DBUtility.ClsPub.CurUserName = oItem.HMaker;
			oBill.omodel = oItem;
			}
			//表体赋值
			//按 },{来拆分数组 //去掉【和】
			sSubStr = sSubStr.Substring(1, sSubStr.Length - 2);
			sSubStr = sSubStr.Replace("\\", "");
			sSubStr = sSubStr.Replace("\n", "");
			sSubStr = "[" + sSubStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillSub> ls = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillSub>>(sSubStr);
			int i = 0;
			foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			{
			i++;
			oItemSub.HEntryID = i;
			oBill.DetailColl.Add(oItemSub);
			}

			string sErrMsg = "";
			bool bResult;
			//获取系统参数
			if (oSystemParameter.ShowBill(ref sErrMsg) == true)
			{
			//保存
			if (oBill.omodel.HInterID == 0) //新增保存
			{
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql1 = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql1);
			}
			}
			else //编辑保存
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "获取系统参数失败！ " + sErrMsg;
			objJsonResult.data = null;
			return objJsonResult;
			}

			DLL.ClsSc_MouldProdBackBill oBill = new DLL.ClsSc_MouldProdBackBill();
			List<Model.ClsSc_MouldProdBackBillMain> lsmain = new List<Model.ClsSc_MouldProdBackBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldProdBackBillMain(msg2);
			foreach (Model.ClsSc_MouldProdBackBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3803";
			oItem.HBillSubType = "3803";
			//oItem.HBillNo = ""; //单据号
			//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			//oItem.HInnerBillNo = ""; // --内部单据号
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			//oItem.HPeriod = 0;
			//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			//oItem.HCheckResult = ""; //验收结论--(正常，异常)
			//oItem.HEmpID = 0; //验收人(Gy_Employee)
			//oItem.HManagerID = 0; //负责人(Gy_Employee)
			//oItem.HDeptID = 0; //验收部门(Gy_Department)
			//oItem.HExplanation = ""; //摘要(故障描述)
			//oItem.HRemark = ""; //备注

			//oItem.HMainSourceInterID = oItem.HInterID;

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			return objJsonResult;
			}
			oBill.omodel = oItem;
			}
			//表体数据
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Model.ClsSc_MouldProdBackBillSub> ls = new List<Model.ClsSc_MouldProdBackBillSub>();
			ls = oListModels.getObjectByJson_Gy_MouldProdBackBillSub(msg3);
			int i = 0;
			foreach (Model.ClsSc_MouldProdBackBillSub oItemSub in ls)
			{

			i++;
			oItemSub.HEntryID = i;

			//oItemSub.HRepairCheckID = 0; //验收项目ID
			//oItemSub.HRepairCheckContent = ""; //验收内容
			//oItemSub.HManagerID = 0; //负责人ID
			//oItemSub.HCloseMan = ""; //行关闭
			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			//oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//oItemSub.HRepairID = 0; //维修项目
			//oItemSub.HRepairExplanation =""; //维修要求
			//oItemSub.HMoney = 0; //维修费用
			oBill.DetailColl.Add(oItemSub);

			}
			//保存
			//保存完毕后处理
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			string sql1 = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'in','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql1);
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			//修改成功
			//string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			if (bResult)
			{
			string sql =string.Format($"exec h_p_Sc_MouldProdBackBillList '{oBill.omodel.HBillNo}' ") ;
			oCn.RunProc(sql);
			string sql = string.Format($"exec h_p_Sc_MouldProdBackBillList '{oBill.omodel.HBillNo}' ");
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo; //成功！
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			@@ -7908,7 +9535,7 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -7916,8 +9543,8 @@
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			objJsonResult.Message = "保存失败！" + e.Message;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -8043,6 +9670,22 @@
			DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (flag == 1)
			{
			if (oBill.omodel.HBillStatus == 2)
			@@ -8066,7 +9709,7 @@
			}
			else
			{
			if (oBill.omodel.HBillStatus == 1)
			if (oBill.omodel.HBillStatus != 2)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			@@ -8097,6 +9740,153 @@
			}
			}
			#endregion

			#region 器具领用退库单关闭/反关闭
			/// <summary>
			/// </summary>
			/// <param name="HInterID">单据ID</param>
			/// <param name="IsAudit">关闭(0),反关闭(1)</param>
			/// <param name="CurUserName">关闭人</param>
			/// <returns></returns>
			[Route("Sc_MouldProdBackBill/CloseSc_MouldProdBackBill")]
			[HttpGet]
			public object CloseSc_MouldProdBackBill(int HInterID, int IsAudit, string CurUserName)
			{
			string ModRightNameCheck = "Sc_MouldProdBackBill_Close";
			DBUtility.ClsPub.CurUserName = CurUserName;
			try
			{
			//检查权限
			if (!DBUtility.ClsPub.Security_Log_second(ModRightNameCheck, 1, false, CurUserName))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败！无权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//HInterID数据判断
			if (HInterID <= 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID小于0！";
			objJsonResult.data = null;
			return objJsonResult;
			}


			Int64 lngBillKey = 0;
			lngBillKey = DBUtility.ClsPub.isLong(HInterID); //对HInterID进行类型的转换
			DAL.ClsSc_MouldProdBackBill oBill = new DAL.ClsSc_MouldProdBackBill(); //实例化单据操作类，用于进行相关操作

			//针对需要进行的操作，检验当前单据的状态是否支持需要进行的操作
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo)) //根据HInterID获取该单据的数据
			{
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HChecker.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未审核!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (IsAudit == 0) //关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未关闭!不需要反关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}


			//进行需要进行的关闭/反关闭操作
			if (IsAudit == 0) //关闭提交
			{
			//关闭提交
			if (oBill.CloseBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭提交
			{
			//反关闭提交
			if (oBill.CancelClose(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "反关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "反关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败或者反关闭失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion


			#endregion

			#region 模具领用单
			@@ -8154,6 +9944,73 @@

			#endregion

			#region 模具领用单列表查询-分页
			/// <summary>
			/// 返回应收单列表
			///参数：string sql。
			///返回值：object。
			/// </summary>
			[Route("Sc_MouldProdOutBill/list_byPage")]
			[HttpGet]
			public object getSc_MouldProdOutBill_byPage(string sWhere, string user, string Organization, int page, int size)
			{
			try
			{
			List<object> columnNameList = new List<object>();
			//查看权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBillList", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无查看权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			string sql = "";
			if (sWhere == null \|\| sWhere.Equals(""))
			{
			sWhere = " and 库存组织='" + Organization + "'";
			sWhere = sWhere.Replace("'", "''");
			sql = "exec h_p_Sc_MouldProdOutHouseBillList_Query " + page + "," + size + ",'" + Organization + "','" + sWhere + "'";
			Log.LogInfo(sql);
			ds = oCN.RunProcReturn(sql, "h_p_Sc_MouldProdOutHouseBillList_Query");
			}
			else
			{
			sWhere += " and 库存组织='" + Organization + "'";
			sWhere = sWhere.Replace("'", "''");
			sql = "exec h_p_Sc_MouldProdOutHouseBillList_Query " + page + "," + size + ",'" + Organization + "','" + sWhere + "'";
			Log.LogInfo(sql);
			ds = oCN.RunProcReturn(sql, "h_p_Sc_MouldProdOutHouseBillList_Query");
			}

			//添加列名
			foreach (DataColumn col in ds.Tables[0].Columns)
			{
			Type dataType = col.DataType;
			string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
			columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
			}

			objJsonResult.code = "1";
			objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			objJsonResult.list = columnNameList;
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region[模具领用单编辑时获取表头数据]
			[Route("Sc_MouldProdOutBill/Sc_MouldProdOutBillListCheckDetai")]
			[HttpGet]
			@@ -8163,7 +10020,7 @@
			return new ApiResult<DataSet> { code = -1, msg = "ID不能为空" };
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();

			var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldProdOutHouseBillList where hmainid= " + HID + " ", "h_v_Sc_MouldProdOutHouseBillList");
			var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldProdOutHouseBill_Edit where hmainid= " + HID + " ", "h_v_Sc_MouldProdOutHouseBill_Edit");
			if (dataSet == null \|\| dataSet.Tables[0].Rows.Count == 0)
			return new ApiResult<DataSet> { code = -1, msg = "不存在退库单号" };

			@@ -8187,7 +10044,7 @@
			ds = oCN.RunProcReturn(string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
			设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty,
			单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID,
			仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码 HUnitCode,计量单位 HUnitName FROM h_v_Sc_MouldProdOutHouseBillList"), "h_v_Sc_MouldProdOutHouseBillList");
			仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码 HUnitCode,计量单位 HUnitName FROM h_v_Sc_MouldProdOutHouseBill_Edit"), "h_v_Sc_MouldProdOutHouseBill_Edit");

			}
			else
			@@ -8197,14 +10054,14 @@
			string sql1 = string.Format(@"SELECT HMaterID,模具代码 HMaterCode,模具名称 HMaterName,规格型号 HMaterSpec,批次 HBatchNo,
			设计寿命 HDesignLife, 剩余寿命 HLeaveLife, 累积使用寿命 HUseLife, 应发数量 HQtyMust, 实发数量 HQty,
			单价 HPrice, 金额 HMoney,HWHSonID HWHID, 发料仓库代码 HWHCode, 发料仓库 HWHName,HSPID,
			仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码 HUnitCode,计量单位 HUnitName FROM h_v_Sc_MouldProdOutHouseBillList where 1 = 1 ");
			仓位代码 HSPCode, 仓位 HSPName,表体备注 HRemark,HStockOrgID,HUnitID,计量单位代码 HUnitCode,计量单位 HUnitName FROM h_v_Sc_MouldProdOutHouseBill_Edit where 1 = 1 ");
			string sql = sql1 + sqlWhere;
			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldProdOutHouseBillList");
			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldProdOutHouseBill_Edit");
			}
			//查汇总
			ds1 = oCN.RunProcReturn(string.Format(@"select 物料代码,max(物料名称)物料名称,规格型号,max(单据号)单据号,批次,sum(实发数量)实发数量,
			HWHSonID,max(发料仓库代码)发料仓库代码,max(发料仓库)发料仓库,表体备注 from h_v_Sc_MouldProdOutHouseBillList
			where 1=1 " + sqlWhere + " group by 物料代码,规格型号,HWHSonID,批次,表体备注"), "h_v_Sc_MouldProdOutHouseBillList");
			HWHSonID,max(发料仓库代码)发料仓库代码,max(发料仓库)发料仓库,表体备注 from h_v_Sc_MouldProdOutHouseBill_Edit
			where 1=1 " + sqlWhere + " group by 物料代码,规格型号,HWHSonID,批次,表体备注"), "h_v_Sc_MouldProdOutHouseBill_Edit");

			list.Add(ds.Tables[0]);
			list.Add(ds1.Tables[0]);
			@@ -8224,7 +10081,158 @@
			}
			#endregion

			#region 模具领用单保存/编辑
			#region 模具领用单保存/编辑 20240702作废
			/// <summary>
			/// 保存模具领用单
			/// </summary>
			/// <param name="msg"></param>
			/// <returns></returns>
			//[Route("Sc_MouldProdOutBill/SaveGetMouldProdOutBillList")]
			//[HttpPost]
			//public object SaveGetMouldProdOutBillList([FromBody] JObject msg)
			//{
			// var _value = msg["msg"].ToString();
			// string msg1 = _value.ToString();
			// string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			// string msg2 = sArray[0].ToString();
			// string msg3 = sArray[1].ToString();
			// string msg4 = sArray[2].ToString();


			// string UserName = "";
			// ListModels oListModels = new ListModels();
			// try
			// {
			// //模块名，写入日志，报错框，用户名
			// if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBill_Edit", 1, false, msg4))
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "没有保存权限";
			// objJsonResult.data = null;
			// return objJsonResult;
			// }
			// DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
			// List<Model.ClsSc_MouldProdOutBillMain> lsmain = new List<Model.ClsSc_MouldProdOutBillMain>();
			// msg2 = msg2.Replace("\\", "");
			// msg2 = msg2.Replace("\n", ""); //\n
			// lsmain = oListModels.getObjectByJson_Gy_MouldProdOutBillMain(msg2);
			// foreach (Model.ClsSc_MouldProdOutBillMain oItem in lsmain)
			// {
			// //oItem.HMaker = "";
			// UserName = oItem.HMaker; //制单人
			// oItem.HBillType = "3802";
			// oItem.HBillSubType = "3802";
			// //oItem.HBillNo = ""; //单据号
			// //oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			// //oItem.HInnerBillNo = ""; // --内部单据号
			// oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			// oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			// //oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			// //oItem.HPeriod = 0;
			// //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			// //oItem.HCheckResult = ""; //验收结论--(正常，异常)
			// //oItem.HEmpID = 0; //验收人(Gy_Employee)
			// //oItem.HManagerID = 0; //负责人(Gy_Employee)
			// //oItem.HDeptID = 0; //验收部门(Gy_Department)
			// //oItem.HExplanation = ""; //摘要(故障描述)
			// //oItem.HRemark = ""; //备注

			// //oItem.HMainSourceInterID = oItem.HInterID;

			// //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			// if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// oBill.omodel = oItem;
			// }
			// //表体数据
			// //按 },{来拆分数组 //去掉【和】
			// msg3 = msg3.Substring(1, msg3.Length - 2);
			// msg3 = msg3.Replace("\\", "");
			// msg3 = msg3.Replace("\n", ""); //\n
			// //msg2 = msg2.Replace("'", "’");
			// List<Model.ClsSc_MouldStockBillSub> ls = new List<Model.ClsSc_MouldStockBillSub>();
			// ls = oListModels.getObjectByJson_Gy_MouldStockBillSub(msg3);
			// int i = 0;
			// foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			// {

			// i++;
			// oItemSub.HEntryID = i;

			// //oItemSub.HRepairCheckID = 0; //验收项目ID
			// //oItemSub.HRepairCheckContent = ""; //验收内容
			// //oItemSub.HManagerID = 0; //负责人ID
			// //oItemSub.HCloseMan = ""; //行关闭
			// oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			// oItemSub.HCloseType = false; //关闭类型
			// //oItemSub.HRemark = ""; //备注
			// oItemSub.HSourceInterID = 0; // 源单主内码
			// oItemSub.HSourceEntryID = 0; //源单子内码
			// //oItemSub.HSourceBillNo = ""; //源单单号
			// //oItemSub.HSourceBillType = ""; //源单类型
			// //oItemSub.HRelationQty = 0; //关联数量
			// //oItemSub.HRelationMoney = 0; //关联金额
			// //oItemSub.HRepairID = 0; //维修项目
			// //oItemSub.HRepairExplanation =""; //维修要求
			// //oItemSub.HMoney = 0; //维修费用
			// oBill.DetailColl.Add(oItemSub);

			// }
			// //保存
			// //保存完毕后处理
			// bool bResult;
			// if (oBill.omodel.HInterID == 0)
			// {
			// // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			// string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			// oCn.RunProc(sql);
			// }
			// else
			// {
			// bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			// //修改成功
			// //string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			// string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			// oCn.RunProc(sql);
			// }
			// if (bResult)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 1;
			// objJsonResult.Message = "保存成功！";
			// //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// else
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			// }
			// catch (Exception e)
			// {
			// objJsonResult.code = "0";
			// objJsonResult.count = 0;
			// objJsonResult.Message = "保存失败！" + e.ToString();
			// objJsonResult.data = 1;
			// return objJsonResult;
			// }
			//}
			#endregion

			#region 模具领用单保存/编辑 20240702
			/// <summary>
			/// 保存模具领用单
			/// </summary>
			@@ -8234,125 +10242,126 @@
			[HttpPost]
			public object SaveGetMouldProdOutBillList([FromBody] JObject msg)
			{
			DAL.ClsSc_MouldProdOutBill oBill = new DAL.ClsSc_MouldProdOutBill();

			var _value = msg["msg"].ToString();
			string msg1 = _value.ToString();
			string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
			string msg2 = sArray[0].ToString();
			string msg3 = sArray[1].ToString();
			string msg4 = sArray[2].ToString();


			string UserName = "";
			ListModels oListModels = new ListModels();
			string sMainStr = sArray[0].ToString(); //主表数据
			string sSubStr = sArray[1].ToString(); //子表数据
			string HMaker = sArray[2].ToString(); //制单人
			try
			{
			//模块名，写入日志，报错框，用户名
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBill_Edit", 1, false, msg4))
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldProdOutBill_Edit", 1, false, HMaker))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有保存权限";
			objJsonResult.Message = "您没有该模块新增/编辑权限,请与管理员联系！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
			List<Model.ClsSc_MouldProdOutBillMain> lsmain = new List<Model.ClsSc_MouldProdOutBillMain>();
			msg2 = msg2.Replace("\\", "");
			msg2 = msg2.Replace("\n", ""); //\n
			lsmain = oListModels.getObjectByJson_Gy_MouldProdOutBillMain(msg2);
			//表头赋值
			sMainStr = sMainStr.Replace("\\", "");
			sMainStr = sMainStr.Replace("\n", "");
			sMainStr = "[" + sMainStr.ToString() + "]";
			List<Model.ClsSc_MouldProdOutBillMain> lsmain = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldProdOutBillMain>>(sMainStr);
			foreach (Model.ClsSc_MouldProdOutBillMain oItem in lsmain)
			{
			//oItem.HMaker = "";
			UserName = oItem.HMaker; //制单人
			oItem.HBillType = "3802";
			oItem.HBillSubType = "3802";
			//oItem.HBillNo = ""; //单据号
			//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
			//oItem.HInnerBillNo = ""; // --内部单据号
			oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
			oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
			//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
			//oItem.HPeriod = 0;
			//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
			//oItem.HCheckResult = ""; //验收结论--(正常，异常)
			//oItem.HEmpID = 0; //验收人(Gy_Employee)
			//oItem.HManagerID = 0; //负责人(Gy_Employee)
			//oItem.HDeptID = 0; //验收部门(Gy_Department)
			//oItem.HExplanation = ""; //摘要(故障描述)
			//oItem.HRemark = ""; //备注

			//oItem.HMainSourceInterID = oItem.HInterID;

			//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
			if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
			if (oItem.HInterID == 0)
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_AddNew;
			}
			else
			{
			BillStatus = DBUtility.ClsPub.Enum_BillStatus.BillStatus_Modify;
			}
			//单据号是否重复
			if (oBill.IsExistBillNo(ref ClsPub.sExeReturnInfo, oItem.HBillNo, BillStatus, oItem.HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
			objJsonResult.data = 1;
			objJsonResult.Message = "单据号重复！不允许保存！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//判断会计期是否合理
			string s = "";
			int sYear = 0;
			int sPeriod = 0;
			if (DBUtility.Xt_BaseBillFun.Fun_AllowYearPeriod(oItem.HDate, ref sYear, ref sPeriod, ref s) == false)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = s;
			objJsonResult.data = null;
			return objJsonResult;
			}

			oItem.HYear = sYear;
			oItem.HPeriod = sPeriod;
			DBUtility.ClsPub.CurUserName = oItem.HMaker;
			oBill.omodel = oItem;
			}
			//表体数据
			//表体赋值
			//按 },{来拆分数组 //去掉【和】
			msg3 = msg3.Substring(1, msg3.Length - 2);
			msg3 = msg3.Replace("\\", "");
			msg3 = msg3.Replace("\n", ""); //\n
			//msg2 = msg2.Replace("'", "’");
			List<Model.ClsSc_MouldStockBillSub> ls = new List<Model.ClsSc_MouldStockBillSub>();
			ls = oListModels.getObjectByJson_Gy_MouldStockBillSub(msg3);
			sSubStr = sSubStr.Substring(1, sSubStr.Length - 2);
			sSubStr = sSubStr.Replace("\\", "");
			sSubStr = sSubStr.Replace("\n", "");
			sSubStr = "[" + sSubStr.ToString() + "]";
			List<Model.ClsSc_MouldStockBillSub> ls = Newtonsoft.Json.JsonConvert.DeserializeObject<List<Model.ClsSc_MouldStockBillSub>>(sSubStr);
			int i = 0;
			foreach (Model.ClsSc_MouldStockBillSub oItemSub in ls)
			{

			i++;
			oItemSub.HEntryID = i;

			//oItemSub.HRepairCheckID = 0; //验收项目ID
			//oItemSub.HRepairCheckContent = ""; //验收内容
			//oItemSub.HManagerID = 0; //负责人ID
			//oItemSub.HCloseMan = ""; //行关闭
			oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
			oItemSub.HCloseType = false; //关闭类型
			//oItemSub.HRemark = ""; //备注
			oItemSub.HSourceInterID = 0; // 源单主内码
			oItemSub.HSourceEntryID = 0; //源单子内码
			//oItemSub.HSourceBillNo = ""; //源单单号
			//oItemSub.HSourceBillType = ""; //源单类型
			//oItemSub.HRelationQty = 0; //关联数量
			//oItemSub.HRelationMoney = 0; //关联金额
			//oItemSub.HRepairID = 0; //维修项目
			//oItemSub.HRepairExplanation =""; //维修要求
			//oItemSub.HMoney = 0; //维修费用
			oBill.DetailColl.Add(oItemSub);

			}
			//保存
			//保存完毕后处理

			string sErrMsg = "";
			bool bResult;
			if (oBill.omodel.HInterID == 0)
			//获取系统参数
			if (oSystemParameter.ShowBill(ref sErrMsg) == true)
			{
			// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			//保存
			if (oBill.omodel.HInterID == 0) //新增保存
			{
			bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeFileStatus 'out','{oBill.omodel.HInterID.ToString()}' ");
			oCn.RunProc(sql);
			}
			}
			else //编辑保存
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);

			if (oSystemParameter.omodel.WMS_CampanyName == "四维尔") //系统参数客户定制化名称空白为通用
			{
			//修改器具档案位置
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			}
			}
			}
			else
			{
			bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
			//修改成功
			//string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID 1,{oBill.omodel.HInterID.ToString()},' ' ");
			string sql = string.Format($"exec h_p_Sc_MouldChangeNowWHID ");
			oCn.RunProc(sql);
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "获取系统参数失败！ " + sErrMsg;
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (bResult)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "保存成功！";
			//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
			objJsonResult.data = 1;
			objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo; //成功！
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			@@ -8360,7 +10369,7 @@
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = 1;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -8368,8 +10377,8 @@
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "保存失败！" + e.ToString();
			objJsonResult.data = 1;
			objJsonResult.Message = "保存失败！" + e.Message;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			@@ -8470,7 +10479,31 @@
			// swhere = swhere + ds.Tables[0].Rows[i]["HMaterID"].ToString() + ",";
			//}
			//swhere = swhere.Substring(0, swhere.Length - 1);
			bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);

			//删除前控制=========================================
			string sql1 = "exec h_p_Sc_MouldProdOutBill_BeforeDelCtrl " + BillOld.omodel.HInterID + ",'" + BillOld.omodel.HBillNo + "','" + user + "'";
			ds = oCN.RunProcReturn(sql1, "h_p_Sc_MouldProdOutBill_BeforeDelCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "删除失败!原因:删除前判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "删除失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//==================================================================================

			bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID,oBill.omodel.HBillNo, "h_p_Sc_MouldProdOutBill_AfterDelCtrl",user, ref DBUtility.ClsPub.sExeReturnInfo);

			if (IsDete)
			{
			//删除成功修改器具档案位置
			@@ -8532,8 +10565,32 @@
			DLL.ClsSc_MouldProdOutBill oBill = new DLL.ClsSc_MouldProdOutBill();
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (flag == 1)
			{
			if (oBill.omodel.HChecker.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已审核!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HBillStatus == 2)
			{
			objJsonResult.code = "0";
			@@ -8544,8 +10601,56 @@
			}
			else
			{
			//审核前控制=========================================
			string sql1 = "exec h_p_Sc_MouldProdOutBill_BeforeCheckCtrl " + oBill.omodel.HInterID + ",'" + oBill.omodel.HBillNo + "','" + user + "'";
			ds = oCN.RunProcReturn(sql1, "h_p_Sc_MouldProdOutBill_BeforeCheckCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:审核前判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			oCN.RollBack();
			return objJsonResult;
			}

			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			oCN.RollBack();
			return objJsonResult;
			}
			//==================================================================================

			string HCheckDate = DateTime.Now.Date.ToString();
			oCn.RunProc(" Update Sc_MouldStockBillMain set HChecker='" + user + "',HCheckDate='" + HCheckDate + "',HBillStatus=2 Where HBillType='3802' and HInterID=" + HInterID);

			//审核后控制=========================================
			string sql2 = "exec h_p_Sc_MouldProdOutBill_AfterCheckCtrl " + oBill.omodel.HInterID + ",'" + oBill.omodel.HBillNo + "','" + user + "'";
			ds = oCN.RunProcReturn(sql2, "h_p_Sc_MouldProdOutBill_AfterCheckCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:审核后判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			oCN.RollBack();
			return objJsonResult;
			}

			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			oCN.RollBack();
			return objJsonResult;
			}
			//==================================================================================
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核成功！";
			@@ -8555,7 +10660,7 @@
			}
			else
			{
			if (oBill.omodel.HBillStatus == 1)
			if (oBill.omodel.HBillStatus != 2)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			@@ -8565,8 +10670,53 @@
			}
			else
			{
			//反审核前控制=========================================
			string sql1 = "exec h_p_Sc_MouldProdOutBill_BeforeUnCheckCtrl " + oBill.omodel.HInterID + ",'" + oBill.omodel.HBillNo + "','" + user + "'";
			ds = oCN.RunProcReturn(sql1, "h_p_Sc_MouldProdOutBill_BeforeUnCheckCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "反审核失败!原因:反审核前判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;

			}
			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "反审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//===========================================================

			string HCheckDate = DateTime.Now.Date.ToString();
			oCn.RunProc(" Update Sc_MouldStockBillMain set HChecker=' ',HCheckDate=' ',HBillStatus=1 Where HBillType='3802' and HInterID=" + HInterID);

			//反审核前控制=========================================
			string sql2 = "exec h_p_Sc_MouldProdOutBill_AfterUnCheckCtrl " + oBill.omodel.HInterID + ",'" + oBill.omodel.HBillNo + "','" + user + "'";
			ds = oCN.RunProcReturn(sql2, "h_p_Sc_MouldProdOutBill_AfterUnCheckCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "反审核失败!原因:反审核后判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;

			}
			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "反审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//===========================================================

			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "反审核成功！";
			@@ -8586,6 +10736,153 @@
			}
			}
			#endregion

			#region 器具领用出库单关闭/反关闭
			/// <summary>
			/// </summary>
			/// <param name="HInterID">单据ID</param>
			/// <param name="IsAudit">关闭(0),反关闭(1)</param>
			/// <param name="CurUserName">关闭人</param>
			/// <returns></returns>
			[Route("Sc_MouldProdOutBill/CloseSc_MouldProdOutBill")]
			[HttpGet]
			public object CloseSc_MouldProdOutBill(int HInterID, int IsAudit, string CurUserName)
			{
			string ModRightNameCheck = "Sc_MouldProdOutBill_Close";
			DBUtility.ClsPub.CurUserName = CurUserName;
			try
			{
			//检查权限
			if (!DBUtility.ClsPub.Security_Log_second(ModRightNameCheck, 1, false, CurUserName))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败！无权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			//HInterID数据判断
			if (HInterID <= 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID小于0！";
			objJsonResult.data = null;
			return objJsonResult;
			}


			Int64 lngBillKey = 0;
			lngBillKey = DBUtility.ClsPub.isLong(HInterID); //对HInterID进行类型的转换
			DAL.ClsSc_MouldProdOutBill oBill = new DAL.ClsSc_MouldProdOutBill(); //实例化单据操作类，用于进行相关操作

			//针对需要进行的操作，检验当前单据的状态是否支持需要进行的操作
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo)) //根据HInterID获取该单据的数据
			{
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HChecker.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未审核!不能进行关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (IsAudit == 0) //关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭判断
			{
			if (oBill.omodel.HCloseMan.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未关闭!不需要反关闭！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}


			//进行需要进行的关闭/反关闭操作
			if (IsAudit == 0) //关闭提交
			{
			//关闭提交
			if (oBill.CloseBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反关闭提交
			{
			//反关闭提交
			if (oBill.CancelClose(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "反关闭成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "反关闭失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "关闭失败或者反关闭失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion


			#endregion

			#region 模具寿命调整单
			@@ -8946,6 +11243,728 @@
			}
			#endregion

			#region [模具寿命调整单审核、反审核]
			/// <summary>
			///
			/// </summary>
			/// <param name="HInterID">单据ID</param>
			/// <param name="IsAudit">审核(0),反审核(1)</param>
			/// <param name="CurUserName">审核人</param>
			/// <returns></returns>
			[Route("Sc_MouldLifeChangeBill/AuditSc_MouldLifeChangeBillList")]
			[HttpGet]
			public object AuditSc_MouldLifeChangeBillList(int HInterID, int IsAudit, string CurUserName)
			{
			string ModRightNameCheck = "Sc_MouldLifeChangeBill_Check";
			DBUtility.ClsPub.CurUserName = CurUserName;
			try
			{
			//审核权限
			if (!DBUtility.ClsPub.Security_Log(ModRightNameCheck, 1, false, CurUserName))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "审核失败！无权限！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (HInterID <= 0)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID小于0！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			Int64 lngBillKey = 0;
			lngBillKey = DBUtility.ClsPub.isLong(HInterID);
			DAL.ClsSc_MouldLifeChangeBill oBill = new DAL.ClsSc_MouldLifeChangeBill();
			//查看是否已审核,关闭,作废
			if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
			{
			if (oBill.omodel.HCloseMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已关闭!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (oBill.omodel.HDeleteMan.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已作废!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			if (IsAudit == 0) //审核判断
			{
			if (oBill.omodel.HChecker.Trim() != "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据已审核!不能再次审核！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反审核判断
			{
			if (oBill.omodel.HChecker.Trim() == "")
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据未审核!不需要反审核!";
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}

			oCn.BeginTran();//开始事物

			if (IsAudit == 0) //审核提交
			{

			//===============================Begin 审核前控制 Begin===============================
			string sql = "exec h_p_Sc_MouldLifeChangeBill_BeforeCheckCtrl " + HInterID + ",'" + CurUserName + "'";
			ds = oCn.RunProcReturn(sql, "h_p_Sc_MouldLifeChangeBill_BeforeCheckCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			oCn.RollBack();//回滚事物
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:审核前判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;

			}
			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			oCn.RollBack();//回滚事物
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//=================================End 审核前控制 End=================================

			//审核提交
			if (oBill.CheckBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{

			//===============================Begin 审核后控制 Begin===============================
			string sql2 = "exec h_p_Sc_MouldLifeChangeBill_AfterCheckCtrl " + HInterID + ",'" + CurUserName + "'";
			ds = oCn.RunProcReturn(sql2, "h_p_Sc_MouldLifeChangeBill_AfterCheckCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			oCn.RollBack();//回滚事物
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:审核后判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;

			}
			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			oCn.RollBack();//回滚事物
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//=================================End 审核后控制 End=================================

			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			oCn.RollBack();//回滚事物
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			if (IsAudit == 1) //反审核提交
			{
			//===============================Begin 反审核前控制 Begin===============================
			string sql = "exec h_p_Sc_MouldLifeChangeBill_BeforeUnCheckCtrl " + HInterID + ",'" + CurUserName + "'";
			ds = oCn.RunProcReturn(sql, "h_p_Sc_MouldLifeChangeBill_BeforeUnCheckCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			oCn.RollBack();//回滚事物
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:反审核前判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;

			}
			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			oCn.RollBack();//回滚事物
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//=================================End 反审核前控制 End=================================
			//反审核提交AbandonCheck
			if (oBill.AbandonCheck(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
			{
			//===============================Begin 反审核后控制 Begin===============================
			string sql2 = "exec h_p_Sc_MouldLifeChangeBill_AfterUnCheckCtrl " + HInterID + ",'" + CurUserName + "'";
			ds = oCn.RunProcReturn(sql2, "h_p_Sc_MouldLifeChangeBill_AfterUnCheckCtrl");
			if (ds == null \|\| ds.Tables.Count == 0 \|\| ds.Tables[0].Rows.Count == 0)
			{
			oCn.RollBack();//回滚事物
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:反审核后判断失败，请与网络管理人员联系";
			objJsonResult.data = null;
			return objJsonResult;

			}
			if (ds.Tables[0].Rows[0]["HBack"].ToString() != "0")
			{
			oCn.RollBack();//回滚事物
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ds.Tables[0].Rows[0]["HRemark"].ToString(); ;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//=================================End 反审核后控制 End=================================
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "反审核成功";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "反审核失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			oCn.Commit();//提交事物
			return objJsonResult;
			}
			catch (Exception e)
			{
			oCn.RollBack();//回滚事物
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#endregion

			#region 器具保养计划单审核/反审核功能
			[Route("Sc_MouldMaintainPlanBill/CheckSc_MouldMaintainPlanBill")]
			[HttpGet]
			public object CheckSc_MouldMaintainPlanBill(string HInterID, int Type, string user)
			{
			DAL.ClsSc_MouldMaintainPlanBill BillOld = new DAL.ClsSc_MouldMaintainPlanBill();
			try
			{
			//判断是否有审核权限
			if (!DBUtility.ClsPub.Security_Log("Sc_MouldMaintainPlanBill_Check", 1, false, user))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "无权限审核!";
			objJsonResult.data = null;
			return objJsonResult;
			}

			if (string.IsNullOrWhiteSpace(HInterID))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "HInterID为空！";
			objJsonResult.data = null;
			return objJsonResult;
			}

			ClsPub.CurUserName = user;
			oCN.BeginTran();//开始事务

			//Type 1 审核 2 反审核
			if (Type == 1)
			{
			if (!BillOld.CheckBill(int.Parse(HInterID), ref ClsPub.sExeReturnInfo))
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			//自动生成点检计划单
			oCN.RunProc("exec h_p_Sc_MouldMaintainPlan_Auto " + HInterID);
			}
			else
			{
			if (BillOld.AbandonCheck(int.Parse(HInterID), ref ClsPub.sExeReturnInfo))
			{
			SQLHelper.ClsCN oCn = new SQLHelper.ClsCN();
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "审核失败!原因:" + ClsPub.sExeReturnInfo;
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			oCN.Commit();//提交事务

			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "执行成功！";
			objJsonResult.data = null;
			return objJsonResult; ;

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "执行失败！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region[器具保养计划表编辑时获取表体数据--保养计划]
			[Route("Sc_MouldMaintainPlanBill/GetPlanList")]
			[HttpGet]
			public object GetPlanList(string sqlWhere)
			{
			DataSet ds;
			try
			{
			SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
			if (sqlWhere == null \|\| sqlWhere.Equals(""))
			{
			ds = oCN.RunProcReturn("select * from h_v_Sc_MouldMaintainPlanList", "h_v_Sc_MouldMaintainPlanList");
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "获取信息成功！";
			objJsonResult.data = ds.Tables[0];
			}
			else
			{
			string sql1 = "select * from h_v_Sc_MouldMaintainPlanList where 1 = 1 ";
			string sql = sql1 + sqlWhere;
			ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldMaintainPlanList");
			objJsonResult.code = "0";
			objJsonResult.count = 1;
			objJsonResult.Message = "获取信息成功！";
			objJsonResult.data = ds.Tables[0];
			}
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "没有返回任何计划！" + e.ToString();
			objJsonResult.data = null;
			}
			return objJsonResult;
			}
			#endregion

			#region 器具点检记录拍照上传
			[Route("Sc_MouldDotCheckBill/UploadFile")]
			[HttpPost]
			public object UploadFile()
			{

			string HBillNo = HttpContext.Current.Request.Params["HBillNo"]; //单据号
			string HRemark = HttpContext.Current.Request.Params["HRemark"]; //备注
			string HUserName = HttpContext.Current.Request.Params["HUserName"]; //创建人
			HttpPostedFile files = HttpContext.Current.Request.Files["file"];
			string path = HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HBillNo);
			//string path = @"D:\\Files\\"+ HBillNo;
			dynamic dyResult = UpLoadFile(files, path, HBillNo, HRemark, HUserName);
			if (dyResult != null && dyResult.result == 1)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "上传成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = dyResult.returnval;
			objJsonResult.data = null;
			return objJsonResult;
			}

			}

			public dynamic UpLoadFile(HttpPostedFile files, string path, string HBillNo, string HRemark, string HUserName)
			{
			dynamic Result_Ob = new { result = 1, returnval = "上传成功！" };
			string filePath = Path.GetFullPath(files.FileName);//文件上传路径
			string fileExtension = Path.GetExtension(files.FileName);// 文件扩展名
			string filename = files.FileName;//文件名
			string fileSavePath = path;// 上传保存路径
			int filesize = files.ContentLength;//获取上传文件的大小单位为字节byte
			int Maxsize = 40000 * 1024;//定义上传文件的最大空间大小为40M
			try
			{
			if (files == null \|\| files.ContentLength <= 0)
			{
			Result_Ob = new { result = 0, returnval = "文件不能为空!" };
			return Result_Ob;
			}
			if (filesize >= Maxsize)
			{
			Result_Ob = new { result = 0, returnval = "上传文件超过40M，不能上传！" };
			return Result_Ob;
			}

			string fileurl = Path.Combine(fileSavePath, filename);
			if (Directory.Exists(fileurl) == true) //如果存在重名文件就提示
			{
			Result_Ob = new { result = 0, returnval = "存在同名文件！" };
			return Result_Ob;
			}
			//删除数据表数据
			ds = oCN.RunProcReturn("delete from MES_AccessoriesList where HSourceBillNo ='" + HBillNo + "' and HFileName='" + filename + "'", "MES_AccessoriesList");
			if (Directory.Exists(path))
			{
			File.Delete(fileurl); //删除指定文件
			files.SaveAs(fileurl);
			string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
			if (File.Exists(fileurl))
			{
			//这里可以执行一些其它的操作，比如更新数据库
			//写入数据表
			oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
			",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
			",HFileClsID,HSourceBillNo" +
			") values('"
			+ filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
			",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
			"','" + 0 + "','" + HBillNo +
			"') ");
			}
			else
			{
			Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
			}
			}
			else
			{
			Directory.CreateDirectory(fileSavePath); //添加文件夹
			files.SaveAs(fileurl);
			string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
			if (File.Exists(fileurl))
			{
			//这里可以执行一些其它的操作，比如更新数据库
			//写入数据表
			oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
			",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
			",HFileClsID,HSourceBillNo" +
			") values('"
			+ filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
			",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
			"','" + 0 + "','" + HBillNo +
			"') ");
			}
			else
			{
			Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
			}
			}

			}
			catch (Exception e)
			{
			Result_Ob = new { result = 0, returnval = e.Message };
			}
			return Result_Ob;
			}

			/// <summary>
			/// 根据单据号查找上传文件列表
			/// </summary>
			/// <param name="sWhere"></param>
			/// <returns></returns>
			[Route("Sc_MouldDotCheckBill/Filelist")]
			[HttpGet]
			public object Filelist(string HBillNo)
			{
			var url = fileip + "/files/MouldFolder/" + HBillNo + "/";
			//@"C:\\files\\"
			try
			{
			ds = oCN.RunProcReturn("select *,'" + url + "'+CAST(HFileName as varchar(200))as url from MES_AccessoriesList where HSourceBillNo='" + HBillNo + "'", "MES_AccessoriesList");
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			/// <summary>
			/// 根据ID,单据号,文件名删除文件
			/// </summary>
			/// <param name="sWhere"></param>
			/// <returns></returns>
			[Route("Sc_MouldDotCheckBill/DeleteFilelist")]
			[HttpGet]
			public object DeleteFilelist(string HItemID, string HSourceBillNo, string HFileName)
			{
			try
			{

			oCN.RunProc("delete from MES_AccessoriesList where HItemID =" + HItemID);
			string fileurl = Path.Combine(HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HSourceBillNo), HFileName);
			File.Delete(fileurl); //删除指定文件
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "删除成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			#region 器具保养记录拍照上传
			[Route("Sc_MouldMaintainBill/UploadFile")]
			[HttpPost]
			public object UploadFile_Maintain()
			{

			string HBillNo = HttpContext.Current.Request.Params["HBillNo"]; //单据号
			string HRemark = HttpContext.Current.Request.Params["HRemark"]; //备注
			string HUserName = HttpContext.Current.Request.Params["HUserName"]; //创建人
			HttpPostedFile files = HttpContext.Current.Request.Files["file"];
			string path = HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HBillNo);
			//string path = @"D:\\Files\\"+ HBillNo;
			dynamic dyResult = UpLoadFile_Maintain(files, path, HBillNo, HRemark, HUserName);
			if (dyResult != null && dyResult.result == 1)
			{
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "上传成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			else
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = dyResult.returnval;
			objJsonResult.data = null;
			return objJsonResult;
			}

			}

			public dynamic UpLoadFile_Maintain(HttpPostedFile files, string path, string HBillNo, string HRemark, string HUserName)
			{
			dynamic Result_Ob = new { result = 1, returnval = "上传成功！" };
			string filePath = Path.GetFullPath(files.FileName);//文件上传路径
			string fileExtension = Path.GetExtension(files.FileName);// 文件扩展名
			string filename = files.FileName;//文件名
			string fileSavePath = path;// 上传保存路径
			int filesize = files.ContentLength;//获取上传文件的大小单位为字节byte
			int Maxsize = 40000 * 1024;//定义上传文件的最大空间大小为40M
			try
			{
			if (files == null \|\| files.ContentLength <= 0)
			{
			Result_Ob = new { result = 0, returnval = "文件不能为空!" };
			return Result_Ob;
			}
			if (filesize >= Maxsize)
			{
			Result_Ob = new { result = 0, returnval = "上传文件超过40M，不能上传！" };
			return Result_Ob;
			}

			string fileurl = Path.Combine(fileSavePath, filename);
			if (Directory.Exists(fileurl) == true) //如果存在重名文件就提示
			{
			Result_Ob = new { result = 0, returnval = "存在同名文件！" };
			return Result_Ob;
			}
			//删除数据表数据
			ds = oCN.RunProcReturn("delete from MES_AccessoriesList where HSourceBillNo ='" + HBillNo + "' and HFileName='" + filename + "'", "MES_AccessoriesList");
			if (Directory.Exists(path))
			{
			File.Delete(fileurl); //删除指定文件
			files.SaveAs(fileurl);
			string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
			if (File.Exists(fileurl))
			{
			//这里可以执行一些其它的操作，比如更新数据库
			//写入数据表
			oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
			",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
			",HFileClsID,HSourceBillNo" +
			") values('"
			+ filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
			",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
			"','" + 0 + "','" + HBillNo +
			"') ");
			}
			else
			{
			Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
			}
			}
			else
			{
			Directory.CreateDirectory(fileSavePath); //添加文件夹
			files.SaveAs(fileurl);
			string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
			if (File.Exists(fileurl))
			{
			//这里可以执行一些其它的操作，比如更新数据库
			//写入数据表
			oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
			",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
			",HFileClsID,HSourceBillNo" +
			") values('"
			+ filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
			",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
			"','" + 0 + "','" + HBillNo +
			"') ");
			}
			else
			{
			Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
			}
			}

			}
			catch (Exception e)
			{
			Result_Ob = new { result = 0, returnval = e.Message };
			}
			return Result_Ob;
			}

			/// <summary>
			/// 根据单据号查找上传文件列表
			/// </summary>
			/// <param name="sWhere"></param>
			/// <returns></returns>
			[Route("Sc_MouldMaintainBill/Filelist")]
			[HttpGet]
			public object Filelist_Maintain(string HBillNo)
			{
			var url = fileip + "/files/MouldFolder/" + HBillNo + "/";
			//@"C:\\files\\"
			try
			{
			ds = oCN.RunProcReturn("select *,'" + url + "'+CAST(HFileName as varchar(200))as url from MES_AccessoriesList where HSourceBillNo='" + HBillNo + "'", "MES_AccessoriesList");
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "Sucess！";
			objJsonResult.data = ds.Tables[0];
			return objJsonResult;

			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}

			/// <summary>
			/// 根据ID,单据号,文件名删除文件
			/// </summary>
			/// <param name="sWhere"></param>
			/// <returns></returns>
			[Route("Sc_MouldMaintainBill/DeleteFilelist")]
			[HttpGet]
			public object DeleteFilelist_Maintain(string HItemID, string HSourceBillNo, string HFileName)
			{
			try
			{

			oCN.RunProc("delete from MES_AccessoriesList where HItemID =" + HItemID);
			string fileurl = Path.Combine(HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HSourceBillNo), HFileName);
			File.Delete(fileurl); //删除指定文件
			objJsonResult.code = "1";
			objJsonResult.count = 1;
			objJsonResult.Message = "删除成功！";
			objJsonResult.data = null;
			return objJsonResult;
			}
			catch (Exception e)
			{
			objJsonResult.code = "0";
			objJsonResult.count = 0;
			objJsonResult.Message = "Exception！" + e.ToString();
			objJsonResult.data = null;
			return objJsonResult;
			}
			}
			#endregion

			}
			}