1

zrg

2024-07-10 a8654c1453cb84fb544d916599f1fe59f7a01cb1

 Pub_Class/CustomerCls/ClsXt_SystemParameter.cs

@@ -1415,10 +1415,18 @@
                    {
                        omodel.Sc_MouldProdInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具领用出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_SaveAutoAddnew")
                    {
@@ -1441,60 +1449,108 @@
                    {
                        omodel.Sc_MouldProdBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdBackBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdBackBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具改制出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldRepairOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldRepairOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具改制入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairInBill_AutoCheck")
                    {
                        omodel.Sc_MouldRepairInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldRepairInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具其他入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherInBill_AutoCheck")
                    {
                        omodel.Sc_MouldOtherInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldOtherInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具其他出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldOtherOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldOtherOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具暂借入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowInBill_AutoCheck")
                    {
                        omodel.Sc_MouldBorrowInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldBorrowInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具暂借出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldBorrowOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldBorrowOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具报废入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapInBill_AutoCheck")
                    {
                        omodel.Sc_MouldScrapInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldScrapInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具报废出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldScrapOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldScrapOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具直接调拨单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdMoveBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdMoveBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdMoveBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdMoveBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具分步调出单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldMoveStockStepOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldMoveStockStepOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具分步调入单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepInBill_AutoCheck")
                    {
                        omodel.Sc_MouldMoveStockStepInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldMoveStockStepInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具盘点单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdCheckStockBill_AutoCheck")
@@ -1549,6 +1605,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "MES_StationInBill_ShowUSERProcess")
                    {
                        omodel.MES_StationInBill_ShowUSERProcess = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //工序进站时默认带入数量（1.流转卡数，2.上道合格数量，3.物料最小包装数量，4.不带入）
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "MES_StationInBill_DefQty")
                    {
                        omodel.MES_StationInBill_DefQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


@@ -1870,6 +1931,10 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ProcessExchangeBill_DeleterAndMakerMustSame")
                    {
                        omodel.Sc_ProcessExchangeBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ProcessExchangeBill_SaveDeptIsNull")
                    {
                        omodel.Sc_ProcessExchangeBill_SaveDeptIsNull = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


@@ -3268,10 +3333,18 @@
                    {
                        omodel.Sc_MouldProdInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具领用出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_SaveAutoAddnew")
                    {
@@ -3294,60 +3367,108 @@
                    {
                        omodel.Sc_MouldProdBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdBackBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdBackBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具改制出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldRepairOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldRepairOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具改制入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairInBill_AutoCheck")
                    {
                        omodel.Sc_MouldRepairInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldRepairInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具其他入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherInBill_AutoCheck")
                    {
                        omodel.Sc_MouldOtherInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldOtherInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具其他出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldOtherOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldOtherOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具暂借入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowInBill_AutoCheck")
                    {
                        omodel.Sc_MouldBorrowInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldBorrowInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具暂借出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldBorrowOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldBorrowOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具报废入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapInBill_AutoCheck")
                    {
                        omodel.Sc_MouldScrapInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldScrapInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具报废出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldScrapOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldScrapOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具直接调拨单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdMoveBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdMoveBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdMoveBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdMoveBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具分步调出单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldMoveStockStepOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldMoveStockStepOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具分步调入单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepInBill_AutoCheck")
                    {
                        omodel.Sc_MouldMoveStockStepInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldMoveStockStepInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具盘点单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdCheckStockBill_AutoCheck")
@@ -3379,7 +3500,10 @@
                    {
                        omodel.Sc_ProcessExchangeBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ProcessExchangeBill_SaveDeptIsNull")
                    {
                        omodel.Sc_ProcessExchangeBill_SaveDeptIsNull = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //-======工序进站接收单
                    //自动新增
@@ -3431,6 +3555,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "MES_StationInBill_PreQtyCtl")
                    {
                        omodel.MES_StationInBill_PreQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //工序进站时默认带入数量（1.流转卡数，2.上道合格数量，3.物料最小包装数量，4.不带入）
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "MES_StationInBill_DefQty")
                    {
                        omodel.MES_StationInBill_DefQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


@@ -3562,6 +3691,11 @@
                    {
                        omodel.Sc_MESBeginWorkBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //刷卡验证
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MESBeginWorkBill_SwipeCardStart")
                    {
                        omodel.Sc_MESBeginWorkBill_SwipeCardStart = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==========返工单
                    //自动审核
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MESReturnWorkBill_AutoCheck")
@@ -3618,6 +3752,11 @@
                    {
                        omodel.OA_ErrMsgBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //是否发送钉钉消息  本地不发,(斯莫尔)客户发
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "OA_ErrMsgBackBill_SendDingDingMsg")
                    {
                        omodel.OA_ErrMsgBackBill_SendDingDingMsg = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //=======报工台，工序汇报自动审核参数
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MESProceReportWorkBill_AutoCheck")
                    {