1

zrg

2024-07-10 a8654c1453cb84fb544d916599f1fe59f7a01cb1

 Pub_Class/CustomerCls/ClsXt_SystemParameter.cs

@@ -88,7 +88,7 @@
                for (int i = 0; i < DsSub.Tables[0].Rows.Count; i++)
                {
                    //WMS条码 系统参数
                    //生产汇报单
                    //==============================生产汇报单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOReportBill_AutoCheck")
                    {
                        omodel.Sc_ICMOReportBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -137,7 +137,18 @@
                    {
                        omodel.Sc_ICMOReportBill_MESFlag = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //收料通知单(送货单、到货确认）
                    //生产汇报单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOReportBill_DeleterAndMakerMustSame")
                    {
                        omodel.Sc_ICMOReportBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //生产汇报单 报工台报检申请生产汇报单前判断是否过程检验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOReportBill_ProcessCheckOut")
                    {
                        omodel.Sc_ICMOReportBill_ProcessCheckOut = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //==========================================收料通知单(送货单、到货确认）
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Cg_POInStockBill_BarCodeCtl")
                    {
                        omodel.Cg_POInStockBill_BarCodeCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -150,7 +161,7 @@
                    {
                        omodel.Cg_POInStockBill_ERPMode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //采购入库单
                    //===================================采购入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_POStockInBill_AutoCheck")
                    {
                        omodel.Kf_POStockInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -195,8 +206,13 @@
                    {
                        omodel.Kf_POStockInBill_AutoBarCode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //采购入库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_POStockInBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_POStockInBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //产品入库单
                    //=======================================产品入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_ProductInBill_AutoCheck")
                    {
                        omodel.Kf_ProductInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -241,8 +257,12 @@
                    {
                        omodel.Kf_ProductInBill_Display = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //其他入库单
                    //产品入库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_ProductInBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_ProductInBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //=======================================================其他入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBill_AutoCheck")
                    {
                        omodel.Kf_OtherInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -283,7 +303,13 @@
                    {
                        omodel.Kf_OtherInBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //其他入库单  校验
                    //其他入库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_OtherInBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //========================================其他入库单  校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBillCheck_MustQtyCtl")
                    {
                        omodel.Kf_OtherInBillCheck_MustQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -297,7 +323,7 @@
                        omodel.Kf_OtherInBillCheck_MultilineCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //委外入库单
                    //==============================================委外入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustInBill_AutoCheck")
                    {
                        omodel.Kf_EntrustInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -338,8 +364,15 @@
                    {
                        omodel.Kf_EntrustInBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //委外入库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustInBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_EntrustInBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //生产领料单


                    //=========================================生产领料单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateOutBill_AutoCheck")
                    {
                        omodel.Kf_MateOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -392,7 +425,10 @@
                    {
                        omodel.Kf_MateOutBill_AutoBarCode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //生产领料单    校验



                    //=========================================生产领料单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateOutBillCheck_MustQtyCtl")
                    {
                        omodel.Kf_MateOutBillCheck_MustQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -406,7 +442,7 @@
                        omodel.Kf_MateOutBillCheck_MultilineCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //销售出库单
                    //=======================================销售出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBill_AutoCheck")
                    {
                        omodel.Kf_SellOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -463,6 +499,12 @@
                    {
                        omodel.Kf_SellOutBill_Display = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //销售出库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_SellOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //销售出库单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBillCheck_MustQtyCtl")
                    {
@@ -475,6 +517,10 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBillCheck_MultilineCtl")
                    {
                        omodel.Kf_SellOutBillCheck_MultilineCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBillCheck_SourceBarCodeCtl")
                    {
                        omodel.Kf_SellOutBillCheck_SourceBarCodeCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //其他出库单
@@ -522,7 +568,14 @@
                    {
                        omodel.Kf_OtherOutBill_FIFOCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //其他出库单  校验
                    //其他出库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_OtherOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


                    //========================================其他出库单  校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherOutBillCheck_MustQtyCtl")
                    {
                        omodel.Kf_OtherOutBillCheck_MustQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -536,7 +589,7 @@
                        omodel.Kf_OtherOutBillCheck_MultilineCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //委外出库单
                    //========================================委外出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustOutBill_AutoCheck")
                    {
                        omodel.Kf_EntrustOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -585,7 +638,14 @@
                    {
                        omodel.Kf_EntrustOutBill_SimpleMode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //委外领料单    校验
                    //委外出库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_EntrustOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


                    //===========================委外领料单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustOutBillCheck_MustQtyCtl")
                    {
                        omodel.Kf_EntrustOutBillCheck_MustQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -599,7 +659,7 @@
                        omodel.Kf_EntrustOutBillCheck_MultilineCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //生产补料单
                    //=============================生产补料单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateReplenishOutBill_AutoCheck")
                    {
                        omodel.Kf_MateReplenishOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -636,7 +696,20 @@
                    {
                        omodel.Kf_MateReplenishOutBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //生产补料单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateReplenishOutBill_FIFOList")
                    {
                        omodel.Kf_MateReplenishOutBill_FIFOList = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateReplenishOutBill_FIFOCtl")
                    {
                        omodel.Kf_MateReplenishOutBill_FIFOCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //生产补料单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateReplenishOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_MateReplenishOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==============================生产补料单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateReplenishOutBillCheck_MustQtyCtl")
                    {
                        omodel.Kf_MateReplenishOutBillCheck_MustQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -650,7 +723,7 @@
                        omodel.Kf_MateReplenishOutBillCheck_MultilineCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //委外补料单
                    //================================委外补料单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustReplenishOutBill_AutoCheck")
                    {
                        omodel.Kf_EntrustReplenishOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -687,7 +760,20 @@
                    {
                        omodel.Kf_EntrustReplenishOutBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //委外补料单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustReplenishOutBill_FIFOList")
                    {
                        omodel.Kf_EntrustReplenishOutBill_FIFOList = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustReplenishOutBill_FIFOCtl")
                    {
                        omodel.Kf_EntrustReplenishOutBill_FIFOCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //委外补料单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustReplenishOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_EntrustReplenishOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //======================委外补料单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustReplenishOutBillCheck_MustQtyCtl")
                    {
                        omodel.Kf_EntrustReplenishOutBillCheck_MustQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -701,7 +787,7 @@
                        omodel.Kf_EntrustReplenishOutBillCheck_MultilineCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //直接调拨单
                    //==================直接调拨单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockBill_AutoCheck")
                    {
                        omodel.Kf_MoveStockBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -750,7 +836,12 @@
                    {
                        omodel.Kf_MoveStockBill_Display = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //直接调拨单  校验
                    //直接调拨单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_MoveStockBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==========================================直接调拨单  校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockBillCheck_MustQtyCtl")
                    {
                        omodel.Kf_MoveStockBillCheck_MustQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -764,7 +855,7 @@
                        omodel.Kf_MoveStockBillCheck_MultilineCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //分步式调出单
                    //==============================================分步式调出单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockStepOutBill_AutoCheck")
                    {
                        omodel.Kf_MoveStockStepOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -809,8 +900,12 @@
                    {
                        omodel.Kf_MoveStockStepOutBill_FIFOCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //分步式调入单
                    //分步式调出单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockStepOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_MoveStockStepOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //=========================================分步式调入单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockStepInBill_AutoCheck")
                    {
                        omodel.Kf_MoveStockStepInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -859,8 +954,13 @@
                    {
                        omodel.Kf_MoveStockStepInBill_SourceBarCodeCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //分步式调入单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockStepInBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_MoveStockStepInBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //采购退料单
                    //=====================================采购退料单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_POStockInBackBill_AutoCheck")
                    {
                        omodel.Kf_POStockInBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -897,8 +997,12 @@
                    {
                        omodel.Kf_POStockInBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //生产退库单
                    //采购退料单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_POStockInBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_POStockInBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==========================生产退库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_ProductInBackBill_AutoCheck")
                    {
                        omodel.Kf_ProductInBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -935,8 +1039,12 @@
                    {
                        omodel.Kf_ProductInBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //其他入库红字
                    //产品退库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_ProductInBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_ProductInBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==============================其他入库红字
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBackBill_AutoCheck")
                    {
                        omodel.Kf_OtherInBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -973,8 +1081,12 @@
                    {
                        omodel.Kf_OtherInBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //委外退库单
                    //其他入库红字单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_OtherInBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===================================委外退库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustInBackBill_AutoCheck")
                    {
                        omodel.Kf_EntrustInBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -1011,8 +1123,12 @@
                    {
                        omodel.Kf_EntrustInBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //生产退料单
                    //其他入库红字单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustInBackBill_SourceWHSPCtl")
                    {
                        omodel.Kf_EntrustInBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //====================================生产退料单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateOutBackBill_AutoCheck")
                    {
                        omodel.Kf_MateOutBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -1053,8 +1169,13 @@
                    {
                        omodel.Kf_MateOutBackBill_SimpleMode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //生产退料单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateOutBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_MateOutBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //销售退库单
                    //===========================销售退库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBackBill_AutoCheck")
                    {
                        omodel.Kf_SellOutBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -1095,8 +1216,12 @@
                    {
                        omodel.Kf_SellOutBackBill_AutoSavePOStockInBackBill = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //其他出库红字
                    //销售退库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_SellOutBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==========================其他出库红字
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherOutBackBill_AutoCheck")
                    {
                        omodel.Kf_OtherOutBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -1133,8 +1258,12 @@
                    {
                        omodel.Kf_OtherOutBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //委外退料单
                    //其他出库红字单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherOutBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_OtherOutBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //======================================委外退料单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustOutBackBill_AutoCheck")
                    {
                        omodel.Kf_EntrustOutBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -1174,6 +1303,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustOutBackBill_SimpleMode")
                    {
                        omodel.Kf_EntrustOutBackBill_SimpleMode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //委外退料单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustOutBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_EntrustOutBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //WMS   通用
@@ -1275,6 +1409,155 @@
                        omodel.BarCode_UpdatePrintQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //============================================================================器具管理EAM系统参数
                    //===========器具采购入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdInBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具领用出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_SaveAutoAddnew")
                    {
                        omodel.Sc_MouldProdOutBill_SaveAutoAddnew = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Sc_MouldProdOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_MouldLifeCtrl")
                    {
                        omodel.Sc_MouldProdOutBill_MouldLifeCtrl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_MouldLifeCtrlType")
                    {
                        omodel.Sc_MouldProdOutBill_MouldLifeCtrlType = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具领用退库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdBackBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdBackBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdBackBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具改制出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldRepairOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldRepairOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具改制入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairInBill_AutoCheck")
                    {
                        omodel.Sc_MouldRepairInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldRepairInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具其他入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherInBill_AutoCheck")
                    {
                        omodel.Sc_MouldOtherInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldOtherInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具其他出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldOtherOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldOtherOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具暂借入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowInBill_AutoCheck")
                    {
                        omodel.Sc_MouldBorrowInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldBorrowInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具暂借出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldBorrowOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldBorrowOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具报废入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapInBill_AutoCheck")
                    {
                        omodel.Sc_MouldScrapInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldScrapInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具报废出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldScrapOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldScrapOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具直接调拨单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdMoveBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdMoveBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdMoveBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdMoveBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具分步调出单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldMoveStockStepOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldMoveStockStepOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具分步调入单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepInBill_AutoCheck")
                    {
                        omodel.Sc_MouldMoveStockStepInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldMoveStockStepInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具盘点单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdCheckStockBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdCheckStockBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //==============================================================================================

                    //-======进站单
@@ -1322,6 +1605,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "MES_StationInBill_ShowUSERProcess")
                    {
                        omodel.MES_StationInBill_ShowUSERProcess = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //工序进站时默认带入数量（1.流转卡数，2.上道合格数量，3.物料最小包装数量，4.不带入）
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "MES_StationInBill_DefQty")
                    {
                        omodel.MES_StationInBill_DefQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


@@ -1477,6 +1765,11 @@
                    {
                        omodel.Sc_ICMOBillWorkQtyStatus_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //当下一个生产日计划是相同产品时，MES系统自动开工下一单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOBillWorkQtyStatus_AutoNextWorkBill")
                    {
                        omodel.Sc_ICMOBillWorkQtyStatus_AutoNextWorkBill = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==========质量汇报单
                    //自动审核
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOBillQualityStatus_AutoCheck")
@@ -1533,11 +1826,117 @@
                        omodel.MES_StationEntrustOutBill_SaveAutoAddnew = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


                    //=============================首件检验单
                    //保存后是否自动审核
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_FirstPieceCheckBill_AutoCheck")
                    {
                        omodel.QC_FirstPieceCheckBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //保存后变为新增状态
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_FirstPieceCheckBill_SaveAutoAddnew")
                    {
                        omodel.QC_FirstPieceCheckBill_SaveAutoAddnew = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_FirstPieceCheckBill_DeleterAndMakerMustSame")
                    {
                        omodel.QC_FirstPieceCheckBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //质检方案来源
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_FirstPieceCheckBill_QCSchemeSource")
                    {
                        omodel.QC_FirstPieceCheckBill_QCSchemeSource = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }



                    //=============================巡检单
                    //保存后是否自动审核
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_PatrolProcCheckBill_AutoCheck")
                    {
                        omodel.QC_PatrolProcCheckBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //保存后变为新增状态
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_PatrolProcCheckBill_SaveAutoAddnew")
                    {
                        omodel.QC_PatrolProcCheckBill_SaveAutoAddnew = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_PatrolProcCheckBill_DeleterAndMakerMustSame")
                    {
                        omodel.QC_PatrolProcCheckBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //质检方案来源
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_PatrolProcCheckBill_QCSchemeSource")
                    {
                        omodel.QC_PatrolProcCheckBill_QCSchemeSource = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


                    //=============================工序转序检验单
                    //保存后是否自动审核
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_ProcessCheckBill_AutoCheck")
                    {
                        omodel.QC_ProcessCheckBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //保存后变为新增状态
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_ProcessCheckBill_SaveAutoAddnew")
                    {
                        omodel.QC_ProcessCheckBill_SaveAutoAddnew = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_ProcessCheckBill_DeleterAndMakerMustSame")
                    {
                        omodel.QC_ProcessCheckBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //质检方案来源
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "QC_ProcessCheckBill_QCSchemeSource")
                    {
                        omodel.QC_ProcessCheckBill_QCSchemeSource = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }



                    //报工台，工序汇报自动审核参数
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MESProceReportWorkBill_AutoCheck")
                    {
                        omodel.Sc_MESProceReportWorkBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //条码主档删除人必须是制单人（'Y'为控制）
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "BarCode_DeleterAndMakerMustSame")
                    {
                        omodel.BarCode_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //-==================生产订单
                    //生产订单同步时自动生成流转卡
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOBill_AutoProcExchBill")
                    {
                        omodel.Sc_ICMOBill_AutoProcExchBill = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOBill_DeleterAndMakerMustSame")
                    {
                        omodel.Sc_ICMOBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


                    //-==================工序流转卡
                    //工序流转卡保存自动同步条码档案
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ProcessExchangeBill_AutoBarCode")
                    {
                        omodel.Sc_ProcessExchangeBill_AutoBarCode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ProcessExchangeBill_DeleterAndMakerMustSame")
                    {
                        omodel.Sc_ProcessExchangeBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ProcessExchangeBill_SaveDeptIsNull")
                    {
                        omodel.Sc_ProcessExchangeBill_SaveDeptIsNull = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


                    ////=========工序进站单
                    ////自动匹配流水号
@@ -1625,6 +2024,16 @@
                    {
                        omodel.Sc_ICMOReportBill_MESFlag = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //生产汇报单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOReportBill_DeleterAndMakerMustSame")
                    {
                        omodel.Sc_ICMOReportBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //生产汇报单 报工台报检申请生产汇报单前判断是否过程检验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOReportBill_ProcessCheckOut")
                    {
                        omodel.Sc_ICMOReportBill_ProcessCheckOut = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //========收料通知单(送货单、到货确认）
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Cg_POInStockBill_BarCodeCtl")
                    {
@@ -1683,6 +2092,11 @@
                    {
                        omodel.Kf_POStockInBill_AutoBarCode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //采购入库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_POStockInBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_POStockInBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //===========产品入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_ProductInBill_AutoCheck")
@@ -1729,6 +2143,11 @@
                    {
                        omodel.Kf_ProductInBill_Display = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //产品入库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_ProductInBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_ProductInBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //=========其他入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBill_AutoCheck")
@@ -1770,6 +2189,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBill_SourceWHSPCtl")
                    {
                        omodel.Kf_OtherInBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //其他入库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_OtherInBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //============其他入库单  校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBillCheck_MustQtyCtl")
@@ -1825,6 +2249,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustInBill_SourceWHSPCtl")
                    {
                        omodel.Kf_EntrustInBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //委外入库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustInBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_EntrustInBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //==========生产领料单
@@ -1951,6 +2380,11 @@
                    {
                        omodel.Kf_SellOutBill_Display = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //销售出库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_SellOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //============销售出库单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBillCheck_MustQtyCtl")
                    {
@@ -1963,6 +2397,10 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBillCheck_MultilineCtl")
                    {
                        omodel.Kf_SellOutBillCheck_MultilineCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBillCheck_SourceBarCodeCtl")
                    {
                        omodel.Kf_SellOutBillCheck_SourceBarCodeCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //============其他出库单
@@ -2009,6 +2447,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherOutBill_FIFOCtl")
                    {
                        omodel.Kf_OtherOutBill_FIFOCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //其他出库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_OtherOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========其他出库单  校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherOutBillCheck_MustQtyCtl")
@@ -2073,6 +2516,11 @@
                    {
                        omodel.Kf_EntrustOutBill_SimpleMode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //委外出库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_EntrustOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==========委外领料单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustOutBillCheck_MustQtyCtl")
                    {
@@ -2124,6 +2572,19 @@
                    {
                        omodel.Kf_MateReplenishOutBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateReplenishOutBill_FIFOList")
                    {
                        omodel.Kf_MateReplenishOutBill_FIFOList = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateReplenishOutBill_FIFOCtl")
                    {
                        omodel.Kf_MateReplenishOutBill_FIFOCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //生产补料单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateReplenishOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_MateReplenishOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==========生产补料单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateReplenishOutBillCheck_MustQtyCtl")
                    {
@@ -2174,6 +2635,19 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustReplenishOutBill_SourceWHSPCtl")
                    {
                        omodel.Kf_EntrustReplenishOutBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustReplenishOutBill_FIFOList")
                    {
                        omodel.Kf_EntrustReplenishOutBill_FIFOList = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustReplenishOutBill_FIFOCtl")
                    {
                        omodel.Kf_EntrustReplenishOutBill_FIFOCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //委外补料单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustReplenishOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_EntrustReplenishOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========委外补料单    校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustReplenishOutBillCheck_MustQtyCtl")
@@ -2238,6 +2712,11 @@
                    {
                        omodel.Kf_MoveStockBill_Display = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //直接调拨单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_MoveStockBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==========直接调拨单  校验
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockBillCheck_MustQtyCtl")
                    {
@@ -2297,6 +2776,11 @@
                    {
                        omodel.Kf_MoveStockStepOutBill_FIFOCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //分步式调出单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockStepOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_MoveStockStepOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //===========分步式调入单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockStepInBill_AutoCheck")
@@ -2347,6 +2831,11 @@
                    {
                        omodel.Kf_MoveStockStepInBill_SourceBarCodeCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //分步式调入单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MoveStockStepInBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_MoveStockStepInBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //===============采购退料单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_POStockInBackBill_AutoCheck")
@@ -2384,6 +2873,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_POStockInBackBill_SourceWHSPCtl")
                    {
                        omodel.Kf_POStockInBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //采购退料单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_POStockInBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_POStockInBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //===========生产退库单
@@ -2423,6 +2917,11 @@
                    {
                        omodel.Kf_ProductInBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //产品退库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_ProductInBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_ProductInBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //===========其他入库红字
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBackBill_AutoCheck")
@@ -2461,6 +2960,11 @@
                    {
                        omodel.Kf_OtherInBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //其他入库红字单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherInBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_OtherInBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //===========委外退库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustInBackBill_AutoCheck")
@@ -2495,6 +2999,11 @@
                    {
                        omodel.Kf_EntrustInBackBill_MaterWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustInBackBill_SourceWHSPCtl")
                    {
                        omodel.Kf_EntrustInBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //其他入库红字单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustInBackBill_SourceWHSPCtl")
                    {
                        omodel.Kf_EntrustInBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
@@ -2541,6 +3050,11 @@
                    {
                        omodel.Kf_MateOutBackBill_SimpleMode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //生产退料单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_MateOutBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_MateOutBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //==========销售退库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBackBill_AutoCheck")
@@ -2583,6 +3097,11 @@
                    {
                        omodel.Kf_SellOutBackBill_AutoSavePOStockInBackBill = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //销售退库单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_SellOutBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_SellOutBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //=========其他出库红字
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherOutBackBill_AutoCheck")
@@ -2620,6 +3139,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherOutBackBill_SourceWHSPCtl")
                    {
                        omodel.Kf_OtherOutBackBill_SourceWHSPCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //其他出库红字单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_OtherOutBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_OtherOutBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //===========委外退料单
@@ -2662,6 +3186,21 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustOutBackBill_SimpleMode")
                    {
                        omodel.Kf_EntrustOutBackBill_SimpleMode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //委外退料单暂存删除人必须是制单人
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Kf_EntrustOutBackBill_DeleterAndMakerMustSame")
                    {
                        omodel.Kf_EntrustOutBackBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //===========生产组托单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_PackUnionBill_SourceBillTypeCtl")
                    {
                        omodel.Sc_PackUnionBill_SourceBillTypeCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_PackUnionBill_SourceBillNoCtl")
                    {
                        omodel.Sc_PackUnionBill_SourceBillNoCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //==============================================WMS   通用
@@ -2741,7 +3280,7 @@
                        omodel.WMS_BillDateMode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //桌面条码模块
                    //桌面条码模块  条码主档
                    //有源单生成条码，生成条码数量可否超源单数量控制
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "BarCode_SourceQtyCtl")
                    {
@@ -2782,6 +3321,160 @@
                    {
                        omodel.BarCode_AutoSellOutBackBillWMS = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //条码主档删除人必须是制单人（'Y'为控制）
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "BarCode_DeleterAndMakerMustSame")
                    {
                        omodel.BarCode_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //============================================================================器具管理EAM系统参数
                    //===========器具采购入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdInBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具领用出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_SaveAutoAddnew")
                    {
                        omodel.Sc_MouldProdOutBill_SaveAutoAddnew = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_DeleterAndMakerMustSame")
                    {
                        omodel.Sc_MouldProdOutBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_MouldLifeCtrl")
                    {
                        omodel.Sc_MouldProdOutBill_MouldLifeCtrl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdOutBill_MouldLifeCtrlType")
                    {
                        omodel.Sc_MouldProdOutBill_MouldLifeCtrlType = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具领用退库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdBackBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdBackBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdBackBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具改制出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldRepairOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldRepairOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具改制入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairInBill_AutoCheck")
                    {
                        omodel.Sc_MouldRepairInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldRepairInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldRepairInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具其他入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherInBill_AutoCheck")
                    {
                        omodel.Sc_MouldOtherInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldOtherInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具其他出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldOtherOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldOtherOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldOtherOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具暂借入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowInBill_AutoCheck")
                    {
                        omodel.Sc_MouldBorrowInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldBorrowInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具暂借出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldBorrowOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldBorrowOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldBorrowOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具报废入库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapInBill_AutoCheck")
                    {
                        omodel.Sc_MouldScrapInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldScrapInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具报废出库单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldScrapOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldScrapOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldScrapOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具直接调拨单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdMoveBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdMoveBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdMoveBill_BarCodeQty")
                    {
                        omodel.Sc_MouldProdMoveBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具分步调出单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepOutBill_AutoCheck")
                    {
                        omodel.Sc_MouldMoveStockStepOutBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepOutBill_BarCodeQty")
                    {
                        omodel.Sc_MouldMoveStockStepOutBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具分步调入单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepInBill_AutoCheck")
                    {
                        omodel.Sc_MouldMoveStockStepInBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldMoveStockStepInBill_BarCodeQty")
                    {
                        omodel.Sc_MouldMoveStockStepInBill_BarCodeQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //===========器具盘点单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MouldProdCheckStockBill_AutoCheck")
                    {
                        omodel.Sc_MouldProdCheckStockBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //============================================================================MES系统参数

@@ -2791,6 +3484,10 @@
                    {
                        omodel.Sc_ICMOBill_AutoProcExchBill = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOBill_DeleterAndMakerMustSame")
                    {
                        omodel.Sc_ICMOBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


                    //-==================工序流转卡
@@ -2799,7 +3496,14 @@
                    {
                        omodel.Sc_ProcessExchangeBill_AutoBarCode = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ProcessExchangeBill_DeleterAndMakerMustSame")
                    {
                        omodel.Sc_ProcessExchangeBill_DeleterAndMakerMustSame = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ProcessExchangeBill_SaveDeptIsNull")
                    {
                        omodel.Sc_ProcessExchangeBill_SaveDeptIsNull = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }

                    //-======工序进站接收单
                    //自动新增
@@ -2847,6 +3551,18 @@
                    {
                        omodel.MES_StationInBill_DeleteRelationCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //本道进站数量不能大于上道出站合格数量
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "MES_StationInBill_PreQtyCtl")
                    {
                        omodel.MES_StationInBill_PreQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //工序进站时默认带入数量（1.流转卡数，2.上道合格数量，3.物料最小包装数量，4.不带入）
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "MES_StationInBill_DefQty")
                    {
                        omodel.MES_StationInBill_DefQty = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }



                    //===============工序出站汇报单
                    //自动新增
@@ -2888,6 +3604,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "MES_StationOutBill_InStockType")
                    {
                        omodel.MES_StationOutBill_InStockType = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //本道出站数量不允许小于下道进站数量
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "MES_StationOutBill_NextQtyCtl")
                    {
                        omodel.MES_StationOutBill_NextQtyCtl = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }


@@ -2970,6 +3691,11 @@
                    {
                        omodel.Sc_MESBeginWorkBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //刷卡验证
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MESBeginWorkBill_SwipeCardStart")
                    {
                        omodel.Sc_MESBeginWorkBill_SwipeCardStart = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==========返工单
                    //自动审核
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MESReturnWorkBill_AutoCheck")
@@ -2993,6 +3719,11 @@
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOBillWorkQtyStatus_AutoCheck")
                    {
                        omodel.Sc_ICMOBillWorkQtyStatus_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //当下一个生产日计划是相同产品时，MES系统自动开工下一单
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_ICMOBillWorkQtyStatus_AutoNextWorkBill")
                    {
                        omodel.Sc_ICMOBillWorkQtyStatus_AutoNextWorkBill = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //==========质量汇报单
                    //自动审核
@@ -3021,6 +3752,11 @@
                    {
                        omodel.OA_ErrMsgBackBill_AutoCheck = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //是否发送钉钉消息  本地不发,(斯莫尔)客户发
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "OA_ErrMsgBackBill_SendDingDingMsg")
                    {
                        omodel.OA_ErrMsgBackBill_SendDingDingMsg = ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HValue"]);
                    }
                    //=======报工台，工序汇报自动审核参数
                    if (ClsPub.isStrNull(DsSub.Tables[0].Rows[i]["HKey"]) == "Sc_MESProceReportWorkBill_AutoCheck")
                    {