器具保养规程、器具点检规程、设备点检规程导出添加

wtt

2024-12-10 871bc633a7daf1893acc98a84c64c93c9a30aaff

 WebAPI/Controllers/Sc_MouldRepairInBillListController.cs

@@ -4,6 +4,8 @@
using System;
using System.Collections.Generic;
using System.Data;
using System.IO;
using System.Web;
using System.Web.Http;
using ViewAPI;
using WebAPI.Models;
@@ -26,6 +28,7 @@

        public DAL.ClsSc_MouldScrapInBill BillNew0 = new DAL.ClsSc_MouldScrapInBill();   //模具报废入库对应单据类
        public DAL.ClsSc_MouldScrapInBill BillOld0 = new DAL.ClsSc_MouldScrapInBill();   //模具报废入库对应单据类
        string fileip = System.Configuration.ConfigurationManager.AppSettings["FileIP"];


        /// <summary>
@@ -603,6 +606,49 @@
        }
        #endregion

        #region 器具寿命耗用分析报表 
        [Route("Sc_MouldRepairInBillList/Get_Sc_MouldLifeUsePicReport")]
        [HttpGet]
        public object Get_Sc_MouldLifeUsePicReport(string sWhere)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                if (sWhere == null || sWhere.Equals(""))
                {
                    ds = oCN.RunProcReturn("select * from h_v_Sc_MouldLifeUsePicReport order by 月份 desc", "h_v_Sc_MouldLifeUsePicReport");
                }
                else
                {
                    string sql1 = "select * from h_v_Sc_MouldLifeUsePicReport where 1 = 1 ";
                    string sql = sql1 + sWhere + " order by 日期 ";
                    ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldLifeUsePicReport");
                }
                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion


        /// <summary>
@@ -721,81 +767,7 @@
        //}
        #endregion

        /// <summary>
        /// 模具维修工单表列表
        /// </summary>
        /// <returns></returns>
        [Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBillList")]
        [HttpGet]
        public object GetMouldRepairWorkBillList(string sWhere,string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                ds = Sc_MouldRepairWorkBillList_s(sWhere);

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                //if (ds.Tables[0].Rows.Count != 0 || ds != null)
                //{
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
                //}
                //else
                //{
                //objJsonResult.code = "0";
                //objJsonResult.count = 0;
                //objJsonResult.Message = "无数据";
                //objJsonResult.data = null;
                //return objJsonResult;
                //}
            }
            catch (Exception ex)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        #region sql语句


        public static DataSet Sc_MouldRepairWorkBillList_s(string sWhere)
        {
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList where 1=1 " + sWhere+ " order by hmainid desc", "h_v_Sc_MouldRepairWorkBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList where 1 = 1 ";
                string sql = sql1 + sWhere + "order by hmainid desc";
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList");
            }
        }
        #endregion
       


        /// <summary>
@@ -1245,8 +1217,6 @@
                    }
                    //================================================================================== 

                    //更新及时库存表   减少调入库存,增加调出库存
                    ds = oCN.RunProcReturn("exec h_KF_UPDateICinventory_Move  '"+ oBill.omodel.HInterID + "','"+ oBill.omodel.HBillType+ "','1'", "h_KF_UPDateICinventory_Move");

                    //审核单据
                    if (!oBill.CheckBill(oBill.omodel.HInterID, oBill.omodel.HBillNo, "h_p_Kf_MoveStockBill_AfterCheckCtrl", user, ref DBUtility.ClsPub.sExeReturnInfo) == true)
@@ -1298,9 +1268,6 @@
                        return objJsonResult;
                    }
                    //===========================================================          

                    //更新及时库存表   增加调入库存,减少调出库存
                    ds = oCN.RunProcReturn("exec h_KF_UPDateICinventory_Move  '" + oBill.omodel.HInterID + "','" + oBill.omodel.HBillType + "','2'", "h_KF_UPDateICinventory_Move");

                    //反审核单据
                    if (oBill.AbandonCheck(oBill.omodel.HInterID, oBill.omodel.HBillNo, "h_p_Kf_MoveStockBill_AfterUnCheckCtrl", user, ref DBUtility.ClsPub.sExeReturnInfo) == true)
@@ -1584,6 +1551,7 @@
        {
            try
            {
                List<object> columnNameList = new List<object>();  //定义声明变量 ，把通过 new List<object>()创建的 实例，赋值给变量
                //判断是否有查询权限
                if (!DBUtility.ClsPub.Security_Log("Kf_MoveStockBillQuery", 1, false, user))
                {
@@ -1603,11 +1571,18 @@
                    string sql = "select * from h_v_IF_MoveStockBillList where 1=1 " + sWhere+ "order by hmainid desc";
                    ds = oCN.RunProcReturn(sql, "h_v_IF_MoveStockBillList");
                }
                foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
                {
                    Type dataType = col.DataType; //获取当前数据类型传入 自定义变量datadataType
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接         // 将列名和数据类型信息拼接成一个JSON格式的字符串
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
              
            }
@@ -1776,6 +1751,7 @@
        {
            try
            {
                List<object> columnNameList = new List<object>();  //定义声明变量 ，把通过 new List<object>()创建的 实例，赋值给变量
                //判断是否有查询权限
                if (!DBUtility.ClsPub.Security_Log("Kf_SellOutBillQuery", 1, false, user))
                {
@@ -1787,6 +1763,12 @@
                }

                ds = Sc_GetSellOutBillList(sWhere);
                foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
                {
                    Type dataType = col.DataType; //获取当前数据类型传入 自定义变量datadataType
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接         // 将列名和数据类型信息拼接成一个JSON格式的字符串
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                //if (ds.Tables[0].Rows.Count != 0 || ds != null)
                //{
@@ -1794,6 +1776,7 @@
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
                //}
                //else
@@ -1814,6 +1797,66 @@
                return objJsonResult;
            }
        }

        #region 销售出库单列表-分页
        /// <summary>
        /// 销售出库单列表
        /// </summary>
        /// <returns></returns>
        [Route("Kf_SellOutBill/GetSellOutBillList_byPage")]
        [HttpGet]
        public object GetSellOutBillList_byPage(string sWhere, string user, string Organization, int page, int size)
        {
            try
            {
                List<object> columnNameList = new List<object>();  //定义声明变量 ，把通过 new List<object>()创建的 实例，赋值给变量
                //判断是否有查询权限
                if (!DBUtility.ClsPub.Security_Log("Kf_SellOutBillQuery", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "没有查询权限!";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                sWhere = sWhere.Replace("'", "''");

                if (sWhere == null || sWhere.Equals(""))
                {
                    ds = oCN.RunProcReturn("exec h_p_IF_SellOutBillList " + page + "," + size + ",'" + Organization + "'," + "''", "h_p_IF_SellOutBillList");
                }
                else
                {
                    ds = oCN.RunProcReturn("exec h_p_IF_SellOutBillList " + page + "," + size + ",'" + Organization + "','" + sWhere + "'", "h_p_IF_SellOutBillList");
                }

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = int.Parse(ds.Tables[1].Rows[0]["count"].ToString());
                objJsonResult.Message = "Sucess！";
                objJsonResult.list = columnNameList;
                objJsonResult.data = ds.Tables[0];
                return objJsonResult;
            }
            catch (Exception ex)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        /// <summary>
        ///销售出库单删除功能
        /// </summary>
@@ -2201,6 +2244,7 @@
        {
            try
            {
                List<object> columnNameList = new List<object>();  //定义声明变量 ，把通过 new List<object>()创建的 实例，赋值给变量
                //判断是否有查询权限
                if (!DBUtility.ClsPub.Security_Log("Kf_OtherOutBillQuery", 1, false, user))
                {
@@ -2220,13 +2264,21 @@
                    string sql = "select * from h_v_Kf_OtherOutBillList where 1 = 1 " + sWhere+ " order by hmainid desc";
                    ds = oCN.RunProcReturn(sql, "h_v_Kf_OtherOutBillList");
                }

                foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
                {
                    Type dataType = col.DataType; //获取当前数据类型传入 自定义变量datadataType
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接         // 将列名和数据类型信息拼接成一个JSON格式的字符串
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }
                //if (ds.Tables[0].Rows.Count != 0 || ds != null)

                
                //{
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.data = ds.Tables[0];//代码将第一个DataTable（索引为0）赋值给objJsonResult的data属性
                objJsonResult.list = columnNameList;//将columnNameList赋值给objJsonResult的list属性
                return objJsonResult;
                //}
                //else
@@ -3643,6 +3695,7 @@
        {
            try
            {
                List<object> columnNameList = new List<object>();  //定义声明变量 ，把通过 new List<object>()创建的 实例，赋值给变量
                //判断是否有查询权限
                if (!DBUtility.ClsPub.Security_Log("Kf_OtherInBillQuery", 1, false, user))
                {
@@ -3662,13 +3715,19 @@
                    string sql = "select * from h_v_Kf_OtherInBillList where 1 = 1 " + sWhere+ " order by hmainid desc";
                    ds = oCN.RunProcReturn(sql, "h_v_Kf_OtherInBillList");
                }

                foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
                {
                    Type dataType = col.DataType; //获取当前数据类型传入 自定义变量datadataType
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接         // 将列名和数据类型信息拼接成一个JSON格式的字符串
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }
                //if (ds.Tables[0].Rows.Count != 0 || ds != null)
                //{
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.data = ds.Tables[0];//代码将第一个DataTable（索引为0）赋值给objJsonResult的data属性
                objJsonResult.list = columnNameList;//将columnNameList赋值给objJsonResult的list属性
                return objJsonResult;
                //}
                //else
@@ -3835,6 +3894,7 @@
        {
            try
            {
                List<object> columnNameList = new List<object>();  //定义声明变量 ，把通过 new List<object>()创建的 实例，赋值给变量
                //判断是否有查询权限
                if (!DBUtility.ClsPub.Security_Log("Kf_EntrustInBillQuery", 1, false, user))
                {
@@ -3853,13 +3913,20 @@
                    string sql = "select * from h_v_Kf_EntrustInBillList where 1 = 1 " + sWhere+ " order by hmainid desc";
                    ds = oCN.RunProcReturn(sql, "h_v_Kf_EntrustInBillList");
                }
                foreach (DataColumn col in ds.Tables[0].Columns)//遍历ds中第一个表（Tables[0]）的所有列（Columns）每次循环中，col变量会持有当前列的引用
                {
                    Type dataType = col.DataType; //获取当前数据类型传入 自定义变量datadataType
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}"; //字符串拼接         // 将列名和数据类型信息拼接成一个JSON格式的字符串
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                //if (ds.Tables[0].Rows.Count != 0 || ds != null)
                //{
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.data = ds.Tables[0];//代码将第一个DataTable（索引为0）赋值给objJsonResult的data属性
                objJsonResult.list = columnNameList;//将columnNameList赋值给objJsonResult的list属性
                return objJsonResult;
                //}
                //else
@@ -3911,6 +3978,7 @@

        #endregion

        #region 模具维修记录单

        #region 模具维修记录单保存/编辑
        /// <summary>
@@ -3951,7 +4019,7 @@
                lsmain = oListModels.getObjectByJson_Gy_MouldRepairWorkBillMain(msg2);
                foreach (Model.ClsSb_MouldRepairWorkBillMain oItem in lsmain)
                {
                    //oItem.HMaker = "";
                    oItem.HMaker = msg4;
                    UserName = msg4;  //制单人
                    oItem.HBillType = "3807";
                    oItem.HBillSubType = "3807";
@@ -4370,6 +4438,253 @@
        }
        #endregion

        #region 模具维修记录单保存/编辑
        /// <summary>
        /// 保存模具维修单
        /// </summary>
        /// <param name="msg"></param>
        /// <returns></returns>
        [Route("Sb_MouldRepairWorkBill/SaveGetMouldRepairWorkBill_PDA")]
        [HttpPost]
        public object SaveGetMouldRepairWorkBill_PDA([FromBody] JObject msg)
        {
            var _value = msg["msg"].ToString();
            string msg1 = _value.ToString();
            string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();
            string msg4 = sArray[2].ToString();


            string UserName = "";
            ListModels oListModels = new ListModels();
            try
            {
                if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Edit", 1, false, msg4))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无保存权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                DAL.ClsSb_MouldRepairWorkBill oBill = new DAL.ClsSb_MouldRepairWorkBill();
                List<Model.ClsSb_MouldRepairWorkBillMain> lsmain = new List<Model.ClsSb_MouldRepairWorkBillMain>();
                msg2 = msg2.Replace("\\", "");
                msg2 = msg2.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Gy_MouldRepairWorkBillMain(msg2);
                foreach (Model.ClsSb_MouldRepairWorkBillMain oItem in lsmain)
                {
                    oItem.HMaker = msg4;
                    UserName = msg4;  //制单人
                    oItem.HBillType = "3807";
                    oItem.HBillSubType = "3807";
                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
                    oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
                    if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
                    {
                        objJsonResult.code = "0";
                        objJsonResult.count = 0;
                        objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
                        objJsonResult.data = 1;
                        return objJsonResult;
                    }
                    oBill.omodel = oItem;
                }
                //表体数据
                //按 },{来拆分数组 //去掉【和】
                msg3 = msg3.Substring(1, msg3.Length - 2);
                msg3 = msg3.Replace("\\", "");
                msg3 = msg3.Replace("\n", "");  //\n
                //msg2 = msg2.Replace("'", "’");
                List<Model.ClsSb_MouldRepairWorkBillSub> ls = new List<Model.ClsSb_MouldRepairWorkBillSub>();
                ls = oListModels.getObjectByJson_Gy_MouldRepairWorkBillSub(msg3);
                int i = 0;
                foreach (Model.ClsSb_MouldRepairWorkBillSub oItem in ls)
                {

                    i++;
                    oItem.HEntryID = i;
                    oItem.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
                    oItem.HCloseType = false;   //关闭类型
                    oItem.HRelationQty = 0;     //关联数量
                    oBill.DetailColl.Add(oItem);

                }
              

                //保存
                //保存完毕后处理
                bool bResult;
                if (oBill.omodel.HInterID == 0)
                {
                    bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                }
                else
                {
                    bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
                }
                if (bResult)
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
                else
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "保存失败！" + e.ToString();
                objJsonResult.data = 1;
                return objJsonResult;
            }
        }
        #endregion

        #region 模具维修记录表列表
        [Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBillList")]
        [HttpGet]
        public object GetMouldRepairWorkBillList(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                ds = Sc_MouldRepairWorkBillList_s(sWhere);

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                //if (ds.Tables[0].Rows.Count != 0 || ds != null)
                //{
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
                //}
                //else
                //{
                //objJsonResult.code = "0";
                //objJsonResult.count = 0;
                //objJsonResult.Message = "无数据";
                //objJsonResult.data = null;
                //return objJsonResult;
                //}
            }
            catch (Exception ex)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }        

        public static DataSet Sc_MouldRepairWorkBillList_s(string sWhere)
        {
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList where 1=1 " + sWhere + " order by hmainid desc", "h_v_Sc_MouldRepairWorkBillList");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList where 1 = 1 ";
                string sql = sql1 + sWhere + "order by hmainid desc";
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList");
            }
        }
        #endregion

        #region 模具维修记录表列表
        [Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBill_PDA")]
        [HttpGet]
        public object GetMouldRepairWorkBill_PDA(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBillList", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无查看权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                ds = Sc_MouldRepairWorkBillList_PDA(sWhere);

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
                
            }
            catch (Exception ex)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        public static DataSet Sc_MouldRepairWorkBillList_PDA(string sWhere)
        {
            if (sWhere == null || sWhere.Equals(""))
            {
                return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList_PDA where 1=1 " + sWhere + " order by hmainid desc", "h_v_Sc_MouldRepairWorkBillList_PDA");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList_PDA where 1 = 1 ";
                string sql = sql1 + sWhere + "order by hmainid desc";
                return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList_PDA");
            }
        }
        #endregion

        #endregion

        #region 器具维修记录统计分析 
        /// <summary>
        /// 器具维修记录统计分析 列表
@@ -4422,7 +4737,7 @@
        }
        #endregion


        #region 模具验收单

        #region 模具维修验收单保存/编辑
        /// <summary>
@@ -4711,6 +5026,7 @@
        }
        #endregion

        #endregion

        #region 模具故障登记表 

@@ -4760,19 +5076,6 @@
                    //oItem.HInnerBillNo = "";  //  --内部单据号
                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
                    oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
                    //oItem.HEquipID = 0;    //设备ID(Gy_EquipMent)
                    //oItem.HPeriod = 0;
                    //oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));  //  --维修日期
                    //oItem.HCheckResult = "";     //验收结论--(正常，异常)
                    //oItem.HEmpID = 0;           //验收人(Gy_Employee)
                    //oItem.HManagerID = 0;      //负责人(Gy_Employee)
                    //oItem.HDeptID = 0;        //验收部门(Gy_Department)
                    //oItem.HExplanation = "";  //摘要(故障描述)  
                    //oItem.HRemark = "";       //备注

                    //oItem.HMainSourceInterID = oItem.HInterID;

                    //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
                    if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
                    {
                        objJsonResult.code = "0";
@@ -4798,22 +5101,11 @@
                    i++;
                    oItemSub.HEntryID = i;

                    //oItemSub.HRepairCheckID = 0;   //验收项目ID
                    //oItemSub.HRepairCheckContent = ""; //验收内容
                    //oItemSub.HManagerID = 0;   //负责人ID
                    //oItemSub.HCloseMan = "";       //行关闭
                 
                    oItemSub.HCloseType = false;   //关闭类型
                    //oItemSub.HRemark = "";         //备注
                   
                    oItemSub.HSourceInterID = 0;     // 源单主内码
                    oItemSub.HSourceEntryID = 0;   //源单子内码
                                                   //oItemSub.HSourceBillNo = "";  //源单单号
                                                   //oItemSub.HSourceBillType = ""; //源单类型
                                                   //oItemSub.HRelationQty = 0;     //关联数量
                                                   //oItemSub.HRelationMoney = 0;   //关联金额 
                                                   //oItemSub.HRepairID = 0;       //维修项目
                                                   //oItemSub.HRepairExplanation ="";   //维修要求

                    //oItemSub.HMoney = 0;        //维修费用
                    oBill.DetailColl.Add(oItemSub);

                }
@@ -4822,7 +5114,6 @@
                bool bResult;
                if (oBill.omodel.HInterID == 0)
                {
                    // bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                    bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
                }
                else
@@ -4834,7 +5125,6 @@
                    objJsonResult.code = "0";
                    objJsonResult.count = 1;
                    objJsonResult.Message = "保存成功！";
                    //WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
                    objJsonResult.data = 1;
                    return objJsonResult;
                }
@@ -4999,6 +5289,68 @@
            }
        }
        #endregion

        #region 模具故障登记单_PDA
        [Route("Sc_MouldConkBookBill/GetMouldConkBookBillList_PDA")]
        [HttpGet]
        public object GetMouldConkBookBillList_PDA(string sWhere, string user)
        {
            try
            {
                List<object> columnNameList = new List<object>();
                if (!DBUtility.ClsPub.Security_Log("Sc_MouldConkBookBillList", 1, false, user))
                {
                    objJsonResult.code = "0";
                    objJsonResult.count = 0;
                    objJsonResult.Message = "无保存权限！";
                    objJsonResult.data = null;
                    return objJsonResult;
                }

                ds = Sc_MouldConkBookBillList_PDA(sWhere);

                //添加列名
                foreach (DataColumn col in ds.Tables[0].Columns)
                {
                    Type dataType = col.DataType;
                    string ColmString = "{\"ColmCols\":\"" + col.ColumnName + "\",\"ColmType\":\"" + dataType.Name + "\"}";
                    columnNameList.Add(JsonConvert.DeserializeObject(ColmString));//获取到DataColumn列对象的列名
                }

                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                objJsonResult.list = columnNameList;
                return objJsonResult;
            }
            catch (Exception ex)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        public static DataSet Sc_MouldConkBookBillList_PDA(string sWhere)
        {
            DataSet ds;
            if (sWhere == null || sWhere.Equals(""))
            {
                ds = new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldConkBookBillList_PDA where 1=1 " + sWhere + " order by hmainid desc", "h_v_Sc_MouldConkBookBillList_PDA");
            }
            else
            {
                string sql1 = "select * from h_v_Sc_MouldConkBookBillList_PDA where 1 = 1 ";
                string sql = sql1 + sWhere + "order by 日期 desc";
                ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldConkBookBillList_PDA");
            }
            return ds;
        }
        #endregion

        #endregion


@@ -5021,7 +5373,7 @@
            string msg3 = sArray[1].ToString();
            string msg4 = sArray[2].ToString();
            string msg5 = sArray[3].ToString();

            string msg6 = sArray[4].ToString();

            string UserName = "";
            ListModels oListModels = new ListModels();
@@ -5055,6 +5407,7 @@
                    //oItem.HBillNo = "";
                    oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));//  --日期
                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
                    oItem.HPeriod = DBUtility.ClsPub.isLong(DateTime.Now.Month);
                    //oItem.HMakeDate = "";
                    //oItem.HYear = "";
                    //oItem.HPeriod = "";
@@ -5141,6 +5494,32 @@
                    oBill.DetailColl.Add(oItemSub);

                }

                //表体数据
                //按 },{来拆分数组 //去掉【和】
                //如果是编辑就允许保存,否则不允许
                if (oBill.omodel.HInterID != 0)
                {
                    msg6 = msg6.Substring(1, msg6.Length - 2);
                    msg6 = msg6.Replace("\\", "");
                    msg6 = msg6.Replace("\n", "");  
                    List<Model.ClsSc_MouldMaintainPlanBillSub_Plan> lss = new List<Model.ClsSc_MouldMaintainPlanBillSub_Plan>();
                    lss = oListModels.getObjectByJson_Sc_MouldMaintainPlanBillSub_Plan(msg6);
                    int l = 0;
                    foreach (Model.ClsSc_MouldMaintainPlanBillSub_Plan oItem in lss)
                    {

                        l++;
                        oItem.HEntryID = l;
                        oItem.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
                        oItem.HCloseType = false;   //关闭类型
                        oItem.HSourceInterID = 0;     // 源单主内码
                        oItem.HSourceEntryID = 0;   //源单子内码
                        oItem.HRelationQty = 0;     //关联数量                  
                        oBill.DetailCol2.Add(oItem);
                    }
                }
                
                //保存
                //保存完毕后处理
                bool bResult;
@@ -5207,7 +5586,7 @@
            {
                SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
                //获取保养项目编辑数据
                string sql = "select 保养项目ID HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,负责人ID,负责人代码 HManagerNumber,负责人名称 HManagerName,子备注2 HRemark,HMouldMaintainRuleID,HEquipDotCheckNo  from h_v_Sc_MouldMaintainPlanBillSub_Item where 1 = 1 " + sqlWhere + "";
                string sql = "select 保养项目ID HMaintainItemID, 保养项目代码 HMaintainItemNumber,保养项目 HMaintainItem,保养部位 HMaintainPart,具体要求 HClaim,负责人ID HManagerID,负责人代码 HManagerNumber,负责人名称 HManagerName,子备注2 HRemark,HMouldMaintainRuleID,HEquipDotCheckNo  from h_v_Sc_MouldMaintainPlanBillSub_Item where 1 = 1 " + sqlWhere + "";

                ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldMaintainPlanBillSub_Item");
                //获取配件项目编辑数据
@@ -5456,7 +5835,7 @@
                foreach (Model.ClsSc_MouldMaintainBillMain oItem in lsmain)
                {
                    UserName = oItem.HMaker;  //制单人
                    DBUtility.ClsPub.CurUserName = UserName;
                    DBUtility.ClsPub.CurUserName = msg5;
                    oItem.HBillType = "3819";
                    oItem.HBillSubType = "3819";

@@ -6452,8 +6831,6 @@
            string msg2 = sArray[0].ToString();
            string msg3 = sArray[1].ToString();
            string msg4 = sArray[2].ToString();
            //string msg5 = sArray[3].ToString();


            string UserName = "";
            ListModels oListModels = new ListModels();
@@ -6474,28 +6851,14 @@
                msg2 = msg2.Replace("\n", "");  //\n
                lsmain = oListModels.getObjectByJson_Sc_MouldDotCheckPlanBillMain(msg2);
                foreach (Model.ClsSc_MouldDotCheckPlanBillMain oItem in lsmain)
                {
                    //oItem.HMaker = "";
                {                  
                    UserName = oItem.HMaker;  //制单人
                    oItem.HBillType = "3820";
                    oItem.HBillSubType = "3820";

                    //oItem.HInterID =0;
                    //oItem.HBillNo = "";
                 
                    oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));//  --日期
                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
                    //oItem.HMakeDate = "";
                    //oItem.HYear = "";
                    //oItem.HPeriod = "";
                    //oItem.HRemark = "";
                    //oItem.HCycleUnit = "";
                    //oItem.HCheckCycle = "";
                    //oItem.HBeginDate = "";
                    //oItem.HEndDate = "";
                    //oItem.HInnerBillNo = "";
                    //oItem.HExplanation = "";

                    //oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
                    oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);                   
                  
                    if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
                    {
                        objJsonResult.code = "0";
@@ -6520,7 +6883,7 @@

                    i++;
                    oItemSub.HEntryID = i;
                    //oItemSub.HCloseMan = "";       //行关闭

                    oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
                    oItemSub.HCloseType = false;   //关闭类型
                    //oItemSub.HRemark = "";         //备注
@@ -6528,43 +6891,10 @@
                    oItemSub.HSourceEntryID = 0;   //源单子内码
                    //oItemSub.HSourceBillNo = "";  //源单单号
                    //oItemSub.HSourceBillType = ""; //源单类型
                    oItemSub.HRelationQty = 0;     //关联数量
                                                   //oItemSub.HRelationMoney = 0;   //关联金额
                                                   //HMaterID = "";//配件代码
                                                   //HUnitID = "";//单位代码
                                                   //HQty = "";//实际用量
                                                   //HQtyMust = "";//单位用量
                                                   //HRemark = "";//备注
                    oItemSub.HRelationQty = 0;     //关联数量                                                

                    oBill.DetailColl.Add(oItemSub);

                }

                ////配件项表体数据
                ////按 },{来拆分数组 //去掉【和】
                //msg5 = msg5.Substring(1, msg5.Length - 2);
                //msg5 = msg5.Replace("\\", "");
                //msg5 = msg5.Replace("\n", "");  //\n
                //                                //msg2 = msg2.Replace("'", "’");
                //List<Model.ClsSc_MouldDotCheckPlanBillSub_Item> ls1 = new List<Model.ClsSc_MouldDotCheckPlanBillSub_Item>();
                //ls1 = oListModels.getObjectByJson_Sc_MouldDotCheckPlanBillSub_Item(msg5);
                //int j = 0;
                //foreach (Model.ClsSc_MouldDotCheckPlanBillSub_Item oItemSub in ls1)
                //{

                //    j++;
                //    oItemSub.HEntryID = j;
                //    //oItemSub.HCloseMan = "";       //行关闭
                //    oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
                //    oItemSub.HCloseType = false;   //关闭类型

                //    oItemSub.HSourceInterID = 0;     // 源单主内码
                //    oItemSub.HSourceEntryID = 0;   //源单子内码

                //    oItemSub.HRelationQty = 0;     //关联数量
                //    oBill.DetailCol.Add(oItemSub);
                //}

                }                
                //保存
                //保存完毕后处理
                bool bResult;
@@ -10193,5 +10523,366 @@
            return objJsonResult;
        }
        #endregion

        #region 器具点检记录拍照上传
        [Route("Sc_MouldDotCheckBill/UploadFile")]
        [HttpPost]
        public object UploadFile()
        {

            string HBillNo = HttpContext.Current.Request.Params["HBillNo"];  //单据号
            string HRemark = HttpContext.Current.Request.Params["HRemark"];  //备注
            string HUserName = HttpContext.Current.Request.Params["HUserName"];  //创建人
            HttpPostedFile files = HttpContext.Current.Request.Files["file"];
            string path = HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HBillNo);
            //string path = @"D:\\Files\\"+ HBillNo;
            dynamic dyResult = UpLoadFile(files, path, HBillNo, HRemark, HUserName);
            if (dyResult != null && dyResult.result == 1)
            {
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "上传成功！";
                objJsonResult.data = null;
                return objJsonResult;
            }
            else
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = dyResult.returnval;
                objJsonResult.data = null;
                return objJsonResult;
            }

        }

        public dynamic UpLoadFile(HttpPostedFile files, string path, string HBillNo, string HRemark, string HUserName)
        {
            dynamic Result_Ob = new { result = 1, returnval = "上传成功！" };
            string filePath = Path.GetFullPath(files.FileName);//文件上传路径
            string fileExtension = Path.GetExtension(files.FileName);// 文件扩展名
            string filename = files.FileName;//文件名
            string fileSavePath = path;// 上传保存路径
            int filesize = files.ContentLength;//获取上传文件的大小单位为字节byte
            int Maxsize = 40000 * 1024;//定义上传文件的最大空间大小为40M
            try
            {
                if (files == null || files.ContentLength <= 0)
                {
                    Result_Ob = new { result = 0, returnval = "文件不能为空!" };
                    return Result_Ob;
                }
                if (filesize >= Maxsize)
                {
                    Result_Ob = new { result = 0, returnval = "上传文件超过40M，不能上传！" };
                    return Result_Ob;
                }

                string fileurl = Path.Combine(fileSavePath, filename);
                if (Directory.Exists(fileurl) == true)  //如果存在重名文件就提示  
                {
                    Result_Ob = new { result = 0, returnval = "存在同名文件！" };
                    return Result_Ob;
                }
                //删除数据表数据
                ds = oCN.RunProcReturn("delete from MES_AccessoriesList where HSourceBillNo ='" + HBillNo + "' and HFileName='" + filename + "'", "MES_AccessoriesList");
                if (Directory.Exists(path))
                {
                    File.Delete(fileurl);      //删除指定文件
                    files.SaveAs(fileurl);
                    string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
                    if (File.Exists(fileurl))
                    {
                        //这里可以执行一些其它的操作，比如更新数据库
                        //写入数据表
                        oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
                                    ",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
                                    ",HFileClsID,HSourceBillNo" +
                                   ") values('"
                                    + filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
                                    ",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
                                    "','" + 0 + "','" + HBillNo +
                                   "') ");
                    }
                    else
                    {
                        Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
                    }
                }
                else
                {
                    Directory.CreateDirectory(fileSavePath); //添加文件夹
                    files.SaveAs(fileurl);
                    string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
                    if (File.Exists(fileurl))
                    {
                        //这里可以执行一些其它的操作，比如更新数据库
                        //写入数据表
                        oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
                                    ",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
                                    ",HFileClsID,HSourceBillNo" +
                                   ") values('"
                                    + filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
                                    ",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
                                    "','" + 0 + "','" + HBillNo +
                                   "') ");
                    }
                    else
                    {
                        Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
                    }
                }

            }
            catch (Exception e)
            {
                Result_Ob = new { result = 0, returnval = e.Message };
            }
            return Result_Ob;
        }

        /// <summary>
        /// 根据单据号查找上传文件列表
        /// </summary>
        /// <param name="sWhere"></param>
        /// <returns></returns>
        [Route("Sc_MouldDotCheckBill/Filelist")]
        [HttpGet]
        public object Filelist(string HBillNo)
        {
            var url = fileip + "/files/MouldFolder/" + HBillNo + "/";
            //@"C:\\files\\"
            try
            {
                ds = oCN.RunProcReturn("select *,'" + url + "'+CAST(HFileName as varchar(200))as url  from MES_AccessoriesList where HSourceBillNo='" + HBillNo + "'", "MES_AccessoriesList");
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                return objJsonResult;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// 根据ID,单据号,文件名 删除文件
        /// </summary>
        /// <param name="sWhere"></param>
        /// <returns></returns>
        [Route("Sc_MouldDotCheckBill/DeleteFilelist")]
        [HttpGet]
        public object DeleteFilelist(string HItemID, string HSourceBillNo, string HFileName)
        {
            try
            {

                oCN.RunProc("delete from MES_AccessoriesList where HItemID =" + HItemID);
                string fileurl = Path.Combine(HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HSourceBillNo), HFileName);
                File.Delete(fileurl);      //删除指定文件
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "删除成功！";
                objJsonResult.data = null;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion

        #region 器具保养记录拍照上传
        [Route("Sc_MouldMaintainBill/UploadFile")]
        [HttpPost]
        public object UploadFile_Maintain()
        {

            string HBillNo = HttpContext.Current.Request.Params["HBillNo"];  //单据号
            string HRemark = HttpContext.Current.Request.Params["HRemark"];  //备注
            string HUserName = HttpContext.Current.Request.Params["HUserName"];  //创建人
            HttpPostedFile files = HttpContext.Current.Request.Files["file"];
            string path = HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HBillNo);
            //string path = @"D:\\Files\\"+ HBillNo;
            dynamic dyResult = UpLoadFile_Maintain(files, path, HBillNo, HRemark, HUserName);
            if (dyResult != null && dyResult.result == 1)
            {
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "上传成功！";
                objJsonResult.data = null;
                return objJsonResult;
            }
            else
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = dyResult.returnval;
                objJsonResult.data = null;
                return objJsonResult;
            }

        }

        public dynamic UpLoadFile_Maintain(HttpPostedFile files, string path, string HBillNo, string HRemark, string HUserName)
        {
            dynamic Result_Ob = new { result = 1, returnval = "上传成功！" };
            string filePath = Path.GetFullPath(files.FileName);//文件上传路径
            string fileExtension = Path.GetExtension(files.FileName);// 文件扩展名
            string filename = files.FileName;//文件名
            string fileSavePath = path;// 上传保存路径
            int filesize = files.ContentLength;//获取上传文件的大小单位为字节byte
            int Maxsize = 40000 * 1024;//定义上传文件的最大空间大小为40M
            try
            {
                if (files == null || files.ContentLength <= 0)
                {
                    Result_Ob = new { result = 0, returnval = "文件不能为空!" };
                    return Result_Ob;
                }
                if (filesize >= Maxsize)
                {
                    Result_Ob = new { result = 0, returnval = "上传文件超过40M，不能上传！" };
                    return Result_Ob;
                }

                string fileurl = Path.Combine(fileSavePath, filename);
                if (Directory.Exists(fileurl) == true)  //如果存在重名文件就提示  
                {
                    Result_Ob = new { result = 0, returnval = "存在同名文件！" };
                    return Result_Ob;
                }
                //删除数据表数据
                ds = oCN.RunProcReturn("delete from MES_AccessoriesList where HSourceBillNo ='" + HBillNo + "' and HFileName='" + filename + "'", "MES_AccessoriesList");
                if (Directory.Exists(path))
                {
                    File.Delete(fileurl);      //删除指定文件
                    files.SaveAs(fileurl);
                    string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
                    if (File.Exists(fileurl))
                    {
                        //这里可以执行一些其它的操作，比如更新数据库
                        //写入数据表
                        oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
                                    ",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
                                    ",HFileClsID,HSourceBillNo" +
                                   ") values('"
                                    + filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
                                    ",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
                                    "','" + 0 + "','" + HBillNo +
                                   "') ");
                    }
                    else
                    {
                        Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
                    }
                }
                else
                {
                    Directory.CreateDirectory(fileSavePath); //添加文件夹
                    files.SaveAs(fileurl);
                    string StrPath = "/files/MouldFolder/" + HBillNo + "/" + filename;
                    if (File.Exists(fileurl))
                    {
                        //这里可以执行一些其它的操作，比如更新数据库
                        //写入数据表
                        oCN.RunProc("Insert into MES_AccessoriesList (HFileName,HFilePath,HFilePath_Cus,HFileType" +
                                    ",HLoadMan,HLoadDate,HRemark,HVerNum,HFileSize" +
                                    ",HFileClsID,HSourceBillNo" +
                                   ") values('"
                                    + filename.ToString() + "','" + StrPath.ToString() + "','" + filePath.ToString() + "','" + fileExtension.ToString() + "'" +
                                    ",'" + HUserName + "',getdate(),'" + HRemark + "','V1','" + filesize +
                                    "','" + 0 + "','" + HBillNo +
                                   "') ");
                    }
                    else
                    {
                        Result_Ob = new { result = 0, returnval = "上传失败！此文件为恶意文件" };
                    }
                }

            }
            catch (Exception e)
            {
                Result_Ob = new { result = 0, returnval = e.Message };
            }
            return Result_Ob;
        }

        /// <summary>
        /// 根据单据号查找上传文件列表
        /// </summary>
        /// <param name="sWhere"></param>
        /// <returns></returns>
        [Route("Sc_MouldMaintainBill/Filelist")]
        [HttpGet]
        public object Filelist_Maintain(string HBillNo)
        {
            var url = fileip + "/files/MouldFolder/" + HBillNo + "/";
            //@"C:\\files\\"
            try
            {
                ds = oCN.RunProcReturn("select *,'" + url + "'+CAST(HFileName as varchar(200))as url  from MES_AccessoriesList where HSourceBillNo='" + HBillNo + "'", "MES_AccessoriesList");
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "Sucess！";
                objJsonResult.data = ds.Tables[0];
                return objJsonResult;

            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }

        /// <summary>
        /// 根据ID,单据号,文件名 删除文件
        /// </summary>
        /// <param name="sWhere"></param>
        /// <returns></returns>
        [Route("Sc_MouldMaintainBill/DeleteFilelist")]
        [HttpGet]
        public object DeleteFilelist_Maintain(string HItemID, string HSourceBillNo, string HFileName)
        {
            try
            {

                oCN.RunProc("delete from MES_AccessoriesList where HItemID =" + HItemID);
                string fileurl = Path.Combine(HttpContext.Current.Server.MapPath("~/../Files/MouldFolder/" + HSourceBillNo), HFileName);
                File.Delete(fileurl);      //删除指定文件
                objJsonResult.code = "1";
                objJsonResult.count = 1;
                objJsonResult.Message = "删除成功！";
                objJsonResult.data = null;
                return objJsonResult;
            }
            catch (Exception e)
            {
                objJsonResult.code = "0";
                objJsonResult.count = 0;
                objJsonResult.Message = "Exception！" + e.ToString();
                objJsonResult.data = null;
                return objJsonResult;
            }
        }
        #endregion
        
    }
}